905 resultados para MINERAL DEPOSITS
Resumo:
The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry
Resumo:
Created on 3 december 1997, the REMPLAC (Program for Assessment of Mineral Potencial of the Continental Shelf), this porgram aimed to make the basic survey, systematic geological and geophysical continental shelf, detail, at an appropriate scale, sites geo-economic, and perform the analysis and evaluation of mineral deposits. The REMPLAC should continue the efforts of Global Recognition Program of the Brazilian Continental Margin REMAC closed in 1978, the operations Geophysical Sea (GEOMAR) developed by the Directorate of Hydrography and Navigation and the various initiatives of the Program of Marine Geology and Geophysics (PGGM). Despite the high interest on the Amazon platform, there is little information o their morphology and sediment characterization, and in order to fill this gap, the present work samples sedimentological point followed by seismic acquisition. And the studies were to characterize the possible area of interest as being directly influence by tides, which sediments are reworked throughout the platform featuring grain angle with sharp corners, and the carbonate content increases as it approaches the breakdown the platform, and the bodies found outside the foraminifera and mollusks. However, diverging with organic matter that reduces its concentration as it moves away from the coast. The seismic profiles do not get satisfactory results because of low visibility, however, to correlate with the spot samples, of sediment were possible morphological characterization of the area.
Resumo:
A análise dos perfis petrofísicos de poço aberto possui um papel de fundamental importância para os estudos geológicos e geofísicos, no que se refere a obtenção de um maior conhecimento da subsuperfície, bem como para a identificação e exploração de depósitos minerais e petrolíferos. Alguns tópicos importantes da interpretação geológica dos perfis como a determinação de interfaces, a identificação mineralógica e a correlação poço-a-poço são extremamente tediosos e dispendem na sua execução uma grande carga horária. A automação destes procedimentos é em princípio bastante complicada, mas necessária, pois permitirá um melhor aproveitamento do tempo de trabalho do geólogo de produção e do intérprete de perfis. As redes neuronais artificiais apresentam uma boa performance para a solução destes tipos de problema, inclusive nos casos nos quais os algoritmos sequenciais apresentam dificuldades. Mostrar-se-á nesta tese que as redes neuronais artificiais podem ser utilizadas eficientemente para a automação desses procedimentos da interpretação geológica dos perfis. Apresentamos detalhadamente as novas arquiteturas e as aplicações sobre dados sintéticos e perfis reais.
Resumo:
O objetivo deste trabalho foi a aplicação de métodos geofísicos para a avaliação econômica de ocorrência de níquel, cromo e amianto, em uma área de 6,25 km2 - Malha 2 - Serra de Quatipuru, localizada a cerca de 50 km a SW de Conceição do Araguaia, no sul do Estado do Pará. Inicialmente foi aplicado o método magnético em caráter de reconhecimento, usando magnetômetros de campo total e componente vertical visando localizar zonas anômalas de amianto e cromita, uma vez que estes minerais se encontram associados com a magnetita. Em seguida foi usado o método eletromagnético de "dip angle" com o objetivo de definir zonas condutoras associadas a possíveis depósitos minerais ou características estruturais. Com base na interpretação destes dois métodos, definiu-se os locais de aplicação do método de polarização elétrica induzida-resistividade, que teve caráter de detalhe visando como alvo principal depósitos de sulfetos disseminados. As possíveis ocorrências minerais na área foram correlacionadas com anomalias geofísicas e confirmadas através de testemunhos de sondagem concluindo-se não serem de importância econômica. Contudo a aplicação destes métodos geofísicos foi útil, pois possibilitou o levantamento detalhado da área, que de outra forma só poderia ser realizado por meio dos métodos mais convencionais, tais como sondagem mecânica através de perfurações, os quais são muito caros e demorados.
Resumo:
O método eletromagnético GPR foi testado no mapeamento de camadas em depósitos de minérios, localizados em dois diferentes ambientes geológicos. Foram realizadas medidas com o intuito de mapear camadas que compõem depósitos de origem supergênica de bauxita laterítica e goethita. Os levantamentos para o mapeamento das camadas de bauxita foram realizados no município de Paragominas, no Pará. As medidas para o mapeamento das camadas de goethita foram realizadas no interior de uma fazenda particular, localizada entre os municípios de Xambioá e Vanderlândia, estado do Tocantins, próximo ao Cinturão Araguaia. O estudo teve como principal objetivo identificar os parâmetros profundidade e espessura das zonas mineralizadas, que podem auxiliar no trabalho de explotação dos minérios. Os resultados obtidos podem ser considerados bastante satisfatórios, pois o método apresentou boa resposta para os dois tipos de minérios investigados, tornando-se possível a caracterização das camadas e a verificação de suas profundidades e espessuras.
Resumo:
This study investigated the influence of bioactive materials on the dentin surface whitened. MATERIAL AND METHODS: Three bovine teeth were shaped into three dentin wafers. Each wafer was then sectioned, into six dentin slices. One slice from each tooth was distributed into one of 6 groups: 1.CG = control group (distilled water); 2.WT = whitening treatment; 3.WT + MI Paste Plus, applied once a day; 4.WT + Relief ACP30, applied once a day for 30 mintes; 5.WT + Relief ACP60, applied once a day for 60 minutes; 6.WT + Biosilicate®, applied once a week. All groups were treated over 14 days. RESULTS: CG presented all dentinal tubules occluded by smear layer; WT group was observed all dentinal tubules opened. In the groups 3, 4 and 6, tubules were occluded. Group 5, dentinal tubules were completely occluded by mineral deposits. CONCLUSION: The use of bioactive materials immediately after whitening treatment can reduce or even avoid the demineralization effect of whitening and avoid exposing dentinal tubules.
Resumo:
Pós-graduação em Biotecnologia - IQ
Resumo:
This completion of course work has as its object of study the Bauxite Province of Paragominas regarded as the richest Amazon bauxite province and whose genesis is related to laterization processes responsible for the formation of mineral deposits of the Rondon Alumina Project, designed to assess areas in the southeast of Pará State, for mineral resources exploration of bauxite, which is the main source of aluminum in the country. Located in the region of Rondon do Pará - PA, the study area is geologically inserted in Lithostratigraphic Unit called Cobertura Laterítica Matura (Mature Lateritic Cover), formed by alteration of paleotropics Cretaceous siliciclastic rocks, and its geomorphology corresponds to a broad plateau with displays of representative profiles of the processes that acted in the region. In this context, the present research aims to characterize the geological evolution of the laterite profile, with detailed studies in the area, geological description of the formations from the bauxite surfaces, and mineralogical composition litochemical of different horizons that were correlated and deployed in an evolutionary model compatible with its traits. The data collected during the analysis subsidized metalogenetic understanding of the processes that acted in the enrichment of aluminum and iron as well as the redistribution of the latter modified profile. The results and information were embodied in the form of geological characterization of the different constituents of mineral associations of bauxite horizons, similarities or differences in both textural and structural aspects, in order to propose a evolutionary model with retaken of gibbsitization processes
Resumo:
The Guaraní aquifer has relevant importance both as a source of water for several urban centres and the development of agriculture and livestock. In recharge areas the aquifer is free and, therefore, subject to contamination of effluents and tailings deposited on soils that cover it. Thus, it becomes crucial not only its protection at all levels, as the knowledge of its degree of natural vulnerability. The present work used geostatistics modeling techniques to study the natural vulnerability of the Guaraní aquifer in the city of Rio Bonito, State of São Paulo, southeastern Brazil, where the Guarani aquifer is exposed. These techniques, extensively used in evaluation studies of mineral deposits and oil tanks, can be adapted to produce a spatial classification or a regionalisation of probabilistic indices of vulnerability. By ordinary kriging method maps of vulnerability classification were obtained. To determine the vulnerability of the aquifer was employed the Aquifer Vulnerability Index (AVI), which requires knowledge of unsaturated zone thickness and permeability. The final product was a map with probabilistic index of vulnerability of the Guaraní aquifer, which presented values between 0 to 0.33 years, framing the area studied in AVI class extremely high vulnerability
Resumo:
Geophysical methods are widely used in mineral exploration for several types of mineral deposits. When combined with direct studies as geochemistry, a substantial increase in the probability of ore discovery is possible in mineral exploration activities. Electrical geophysical methods are particularly promising in studies related to the search of sulphides due to the contrast of physical properties electric resistivity and chargeability. This paper presents the results obtained from the application of Resistivity (DC) and Induced Polarization methods, through the electrical profiling technique, aiming at evaluating the potential mineral of a gabbro intruded in a metasedimentary sequence, in an area where several occurrences of gold and copper were described. This gabbro is ranked on the Basic-Ultrabasic stratiform bodies, which gather peridotites, gabbros, and layered anortosites. Three radial lines of electrical profiling were performed, spaced of 60° and crossing at the area center, with readings of electric resistivity and chargeability in Wenner-Schlumberger array. The association of low resistivity and high chargeability areas has allowed defining potentially mineralized zones related to structures that condition the drainage net in the gabbro domain. Grains of gold detected through geochemical prospection of alluvial sediments dowstream from the gabbro may have originated from leaching of ores deposited in fractures through the action of river waters within the gabbro domain, possibly consisting of sulphides and gold.
Resumo:
The mineral sector is of utmost importance for Brazilian economic growth, an area which depends on basic geological research to enlarge known deposits and in process of mining, besides discovering new occurrences and mineral deposits. This set of activities is named mineral research, which planning involves economy concepts, market demands and use of methods and techniques for geological evaluation, direct and indirect. This paper aim at performing geophysical detailing on occurrences of supergenic manganese located in the northwest portion of the State of São Paulo, Itapira, for spatial dimensioning of mineral targets, besides the attempt to correlate among the content on physical parameter measured by geophysics. The lack of scientific publications by Brazilian researchers in this theme, availability of previous studies for the selected targets, commercial importance of the mineral goods for the Brazilian Trade Balance, justify the performance of the present research project
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
This paper marks an increased refinement and more detailed accuracy in the description of the geological features of the state. It includes the recent studies of mineral deposits, of oil structures, of the formations of bedded rocks and their included fossils, carried on both by the Federal and State governments and by various interested private persons, such as the mining companies. It is within this period that the Federal Government encouraged the U. S. Geological Survey in the publication of monographs on the National Parks, papers of great popular interest and educational value making these beautiful regions comprehensible in their geological features to the touring public.
Resumo:
The mechanics of intrusion and the processes involved are becoming of more and more interest to contemporary geologists, because most of our mineral deposits are associated with igneous intrusions, and unknown-outcropping deposits are thought to be a thing of the past. If, by studying these processes, we could understand why some igneous masses are barren, while others of similar composition carry economic mineral deposits, geological prospecting for hidden mineral concentration would see a new era.