Search for a heavy neutral gauge boson in the dielectron channel with 5.4 fb(-1) of p(p)over-bar collisions at root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for pair production of doubly charged Higgs bosons in the H(++)H(--)->mu(+)mu(+)mu(-)mu(-) final state

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for W ' boson resonances decaying to a top quark and a bottom quark

We search for the production of a heavy W ' gauge boson that decays to third generation quarks in 0: 9 fb(-1) of p (p) over bar collisions at root s = 1: 96 TeV, collected with the D0 detector at the Fermilab Tevatron collider. We find no significant excess in the final-state invariant mass distribution and set upper limits on the production cross section times branching fraction. For a left-handed W ' boson with SM couplings, we set a lower mass limit of 731 GeV. For right-handed W ' bosons, we set lower mass limits of 739 GeV if the W ' boson decays to both leptons and quarks and 768 GeV if the W ' boson decays only to quarks. We also set limits on the coupling of the W ' boson to fermions as a function of its mass.

Search for Long-Lived Charged Massive Particles with the D0 Detector

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Searches for long-lived charged particles in pp collisions at □ =7 and 8 TeV

Abstract: Results of searches for heavy stable charged particles produced in pp collisions at □ = 7 and 8 TeV are presented corresponding to an integrated luminosity of 5.0 fb-1 and 18.8 fb-1, respectively. Data collected with the CMS detector are used to study the momentum, energy deposition, and time-of-flight of signal candidates. Leptons with an electric charge between e/3 and 8e, as well as bound states that can undergo charge exchange with the detector material, are studied. Analysis results are presented for various combinations of signatures in the inner tracker only, inner tracker and muon detector, and muon detector only. Detector signatures utilized are long time-of-flight to the outer muon system and anomalously high (or low) energy deposition in the inner tracker. The data are consistent with the expected background, and upper limits are set on the production cross section of long-lived gluinos, scalar top quarks, and scalar τ leptons, as well as pair produced long-lived leptons. Corresponding lower mass limits, ranging up to 1322 GeV/c 2 for gluinos, are the most stringent to date. [Figure not available: see fulltext.] © 2013 Cern for the benefit of the CMS collaboration.

Análise dos limites de inflamabilidade a partir de uma visão de pressões parciais de biocombustível

In this work concepts of flammability limits of anhydrous and hydrated ethanol to pressures below atmospheric, using the Dalton model for gaseous mixtures. Theoretical and experimental methods for determining the boundaries and the influence of parameters such as concentration, temperature and pressure were introduced. Analyzes from partial pressures of fuel vapor and correlations with temperature and total pressure were made. Finally presents an overview of aviation fuels, their requisites and trends in the use of biofuels in commercial aviation industry

Entwicklung und Validierung einer massenspektrometrischen Isotopenverdünnungsanalyse zur direkten Multielementbestimmung in pulverförmigen Proben mittels LA-ICP-MS

In dieser Arbeit wurde erstmalig eine massenspektrometrische Isotopenverdünnungsanalyse (MSIVA) als Quantifizierungsmethode für die Multielementbestimmung in pulverförmigen Proben mittels Laserablations-induktiv gekoppelter Plasma-Massenspektrometrie (LA-ICP-MS) entwickelt. Diese LA-ICP-MSIVA wurde zur Bestimmung von Elementspuren in optisch-reinem Calciumfluorid eingesetzt und anhand der Analyse mehrerer zertifizierter Referenzmaterialien unterschiedlicher Matrixzusammensetzung validiert.Mit den in dieser Arbeit entwickelten direkten LA-ICP-MS-Analysenmethoden dürfte es in der Zukunft möglich sein, Routineanalysen von optisch-reinem Calciumfluorid durchzuführen, wobei sich im Vergleich zu naßchemischen Aufschlußverfahren eindeutige Vorteile ergeben. Neben einer deutlich einfacheren und weniger kontaminationsanfälligen Probenvorbereitung liegen die Nachweisgrenzen (im Bereich von 0.05 ng/g für Zr bis 20 ng/g für Mg) um etwa ein bis drei Größenordnungen niedriger.Die am Beispiel der Multielementbestimmung in Calciumfluorid entwickelte LA-ICP-MSIVA wurde nachfolgend anhand der Analyse von sieben zertifizierten Referenzmaterialien mit organischer und anorganischer Matrix validiert. Hierbei wurde für 28 von insgesamt 32 analysierten Elementkonzentrationen eine hervorragende Übereinstimmung mit den zertifizierten Werten erhalten. Im Mittel weichen die mittels LA-ICP-MSIVA analysierten Gehalte nur um 1.6 % von den zertifizierten Werten ab. Die erzielte Präzision von durchschnittlich 4.9 % relativer Standardabweichung für drei unabhängig analysierte Proben liegt im Bereich der durchschnittlichen zertifizierten Unsicherheit der Referenzmaterialien von 4.4 %.

Development of new analytical procedures aimet at the characterization of artistic samples

In this thesis, new advances in the development of spectroscopic based methods for the characterization of heritage materials have been achieved. As concern FTIR spectroscopy new approaches aimed at exploiting near and far IR region for the characterization of inorganic or organic materials have been tested. Paint cross-section have been analysed by FTIR spectroscopy in the NIR range and an “ad hoc” chemometric approach has been developed for the elaboration of hyperspectral maps. Moreover, a new method for the characterization of calcite based on the use of grinding curves has been set up both in MIR and in FAR region. Indeed, calcite is a material widely applied in cultural heritage, and this spectroscopic approach is an efficient and rapid tool to distinguish between different calcite samples. Different enhanced vibrational techniques for the characterisation of dyed fibres have been tested. First a SEIRA (Surface Enhanced Infra-Red Absorption) protocol has been optimised allowing the analysis of colorant micro-extracts thanks to the enhancement produced by the addition of gold nanoparticles. These preliminary studies permitted to identify a new enhanced FTIR method, named ATR/RAIRS, which allowed to reach lower detection limits. Regarding Raman microscopy, the research followed two lines, which have in common the aim of avoiding the use of colloidal solutions. AgI based supports obtained after deposition on a gold-coated glass slides have been developed and tested spotting colorant solutions. A SERS spectrum can be obtained thanks to the photoreduction, which the laser may induce on the silver salt. Moreover, these supports can be used for the TLC separation of a mixture of colorants and the analyses by means of both Raman/SERS and ATR-RAIRS can be successfully reached. Finally, a photoreduction method for the “on fiber” analysis of colorant without the need of any extraction have been optimised.

Validation of an enzyme-linked immunosorbent assay (ELISA) for the measurement of canine S100A12.

BACKGROUND Canine S100 calcium-binding protein A12 (cS100A12) shows promise as biomarker of inflammation in dogs. A previously developed cS100A12-radioimmunoassay (RIA) requires radioactive tracers and is not sensitive enough for fecal cS100A12 concentrations in 79% of tested healthy dogs. An ELISA assay may be more sensitive than RIA and does not require radioactive tracers. OBJECTIVE The purpose of the study was to establish a sandwich ELISA for serum and fecal cS100A12, and to establish reference intervals (RI) for normal healthy canine serum and feces. METHODS Polyclonal rabbit anti-cS100A12 antibodies were generated and tested by Western blotting and immunohistochemistry. A sandwich ELISA was developed and validated, including accuracy and precision, and agreement with cS100A12-RIA. The RI, stability, and biologic variation in fecal cS100A12, and the effect of corticosteroids on serum cS100A12 were evaluated. RESULTS Lower detection limits were 5 μg/L (serum) and 1 ng/g (fecal), respectively. Intra- and inter-assay coefficients of variation were ≤ 4.4% and ≤ 10.9%, respectively. Observed-to-expected ratios for linearity and spiking recovery were 98.2 ± 9.8% (mean ± SD) and 93.0 ± 6.1%, respectively. There was a significant bias between the ELISA and the RIA. The RI was 49-320 μg/L for serum and 2-484 ng/g for fecal cS100A12. Fecal cS100A12 was stable for 7 days at 23, 4, -20, and -80°C; biologic variation was negligible but variation within one fecal sample was significant. Corticosteroid treatment had no clinically significant effect on serum cS100A12 concentrations. CONCLUSIONS The cS100A12-ELISA is a precise and accurate assay for serum and fecal cS100A12 in dogs.

Cracking in the welding of cupro-nickel alloys

The problem of variation in weld crack susceptibility caused by small variations in alloy and impurity elements for the 70-30 cupro-nickel alloy has been investigated. Both wrought and cast versions of the alloy have been studied, the main techniques employed being the Varestraint test and weld thermal simulation. In the wrought alloys, cracking has been found to occur mainly in the weld metal, whilst in the cast alloys cracking is extensive in both weld metal and heat affected zone. The previously reported effects of certain impurities (P,S,Si) in increasing cracking have been confirmed, and it has also been shown that Ti and Zr may both have a crack promoting effect at levels commonly found in cupro-nickels, whilst C can interact with several of the other elements investigated to produce a beneficial effect. The testing carried out using the weld thermal simulator has shown that a relationship does exist between hot ductility and weld cracking. In particular, the absence of the peak in ductility in the range 1100°C-900°C on cooling from a temperature near to the solidus is indicative of a highly crack susceptible alloy. Principal practical implications of the investigation concern the relationship of weld metal cracking to alloy composition, especially the level of certain impurities. It would appear that the upper limits permitted by the alloy specifications are unrealistically high. The introduction of lower impurity limits would alleviate the current problems of variability in resistance to cracking during welding.

Essays on financial crises

This dissertation analyzes recent financial crises in developed and developing countries. The research emphasizes the effects of institutional factors on the international banking and currency crises and their output losses. ^ Chapter two examines the roles of regulation, supervision, and countries' institutional environment in determining the probability of banking crises for a panel of fifteen developed countries from 1975 to 1998. The results from a multivariate logit model indicated that countries with greater government involvement, less capital standard requirements, and lower lending limits on a single borrower are associated with a higher probability of banking crises. ^ Chapter three studies whether output loss in banking crisis differs in market-based or bank-based financial systems. Using existing banking crisis data for sixty-nine countries during 1970–1999, we investigate whether the underlying financial system affects the output loss. The results show that output losses are more serious in market-based economies than those in bank-based economies. Longer crisis duration tends to increase the output losses in banking crises. Finally, countries with deposit insurance and strict law enforcement have less output losses. ^ Chapter four uses macroeconomic and institutional measures to explain the extent of exchange rate depreciation and the decline in stock prices for emerging countries affected by the Mexican currency crisis of 1994–95. The results show that countries with more government budget deficits, and worse reserve adequacies tend to experience large exchange rate depreciation. The institutional measures do not explain much the extent of both the exchange rate depreciation and the decline in stock prices. ^

Elemental analysis of glass and ink by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and laser induced breakdown spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, μXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.

Elemental Analysis of Glass and Ink by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) and Laser Induced Breakdown Spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, µXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.

Dynamic of polycyclic aromatic hydrocarbons in soils treated with biochar.

In recent years the interest in pyrogenic carbon for agricultural use (biochar, i.e. carbonized biomass for agricultural use) has sharply increased. However biochar contain dangerous compounds such as Polycyclic Aromatic Hydrocarbons (PAHs), many of them potentially carcinogenic and mutagenic. They are organic compounds formed from incomplete combustion of organic materials and are persistent pollutants. Therefore, PAHs concentrations and their dynamic must be evaluated in soils amended with biochar. For this, soil samples were collected in three experimental areas in different years (1, 3, 5 or 6) after the application of 0 (control) or 16 Mg ha-1 of biochar. This is the first report of PAHs persistence up to six years in soil treated with biochar. The biochar application increased total PAHs concentrations up to five years after the application, however the levels have always been an order of magnitude lower the limits of prevention established by International Environmental Agencies for soils. Thus, under the evaluated conditions ,the use of biochar was safe concerning PAHs contamination, besides, after six years of the application, the levels found were similar to the control treatment, making it possible to define a safe frequency of application based on the persistence of PAHs in soil.