Synthesis, characterization and spectroscopic investigation of new tetrakis(acetylacetonato)thulate(III) complexes containing alkaline metals as countercations

In this work a series of tetrakis complexes C[Tm(acac)(4)] where C(+) = Li(+) Na(+) and K(+) countercations and acac = acetylacetonate ligand were synthesized and characterized for photoluminescence investigation The relevant aspect is that these complexes are water-free in the first coordination sphere The emission spectra of the tetrakis Tm(3+)-complexes present narrow bands characteristic of the (1)G(4)->(3)H(6) (479 nm) (1)G(4)->(3)F(4) (650 nm) and (1)G(4) ->(3)H(5) (779 nm) transitions of the Tm(3+) ion with the blue emission color at 479 nm as the most prominent one The lifetime values (tau) of the emitting (1)G(4) level of the C[Tm(acac)(4)] complexes were 344 360 and 400 ns for the Li(+) Na(+) and K(+) countercations respectively showing an increasing linear behavior versus the ionic radius of the alkaline ion An efficient intramolecular energy transfer process from the triplet state (T) of the ligands to the emitting (1)G(4) state of the Tm(3+) ion is observed This fact together with the absence of water molecules in first coordination sphere allows these tetrakis Tm(3+)-complexes to act as efficient blue light conversion molecular devices (c) 2010 Elsevier B V All rights reserved

Identificação em tempo real de modelo dinâmico de robô móvel com acionamento diferencial e zona morta

Several mobile robots show non-linear behavior, mainly due friction phenomena between the mechanical parts of the robot or between the robot and the ground. Linear models are efficient in some cases, but it is necessary take the robot non-linearity in consideration when precise displacement and positioning are desired. In this work a parametric model identification procedure for a mobile robot with differential drive that considers the dead-zone in the robot actuators is proposed. The method consists in dividing the system into Hammerstein systems and then uses the key-term separation principle to present the input-output relations which shows the parameters from both linear and non-linear blocks. The parameters are then simultaneously estimated through a recursive least squares algorithm. The results shows that is possible to identify the dead-zone thresholds together with the linear parameters

Sobre a relação entre rotação, atividade crosmosférica e abundância de lítio em estrelas subgigantes

The connection between rotation, CaII emission flux and lithium abundance is analyzed for a sample of subgiant stars, with evolutionary status was determined from the Toulouse-Geneve code and HlPPARCOS trigonometric parallax measurements. We noted that the distribution of rotation and CaII emission flux, as a function of effective temperature, shows a discontinuity located around the same spectral type, F8IV. Stars located blueward of this spectral type, exhibit a large spread of values of rotation and CaII flux, whereas stars redward of F8lV show essentially low ratation anel low CaII flux. The strength of these declines nevertheless, depends on stellar mass. The distribution of lithium abundances also shows a discontinuity, however with behavior a little more complex for subgiants with mass lower than about 1.2 Solar Masses, this decrease is observed later than that in rotation and CaII flux, whereas for masses higher than 1.2 Solar Masses the decrease in lithium abundance is located around the spectral type F8IV. The discrepancy between the location of the discontinuities of rotation and CaII flux and log n(Li) for stars with masses lower than 102 Solar Masses, seems to reflect the sensitivity of these phenomena to the mass of the convective envelope. The drop in rotation, which results mostly from a magnetic braking, requires an increase in the mass of the convective envelope less than that required for the decrease in lithium abundance The location of the discontinuity in log n( Li) in the same region of the discontinuity ties in rotation and CaII flux, for stars with masses higher than 1.2 Solar Masses, may also be explained by the behavior of the deepening of the convective envelope. In contrast to the relationship between rotation and CaII flux the relationship between lithium abundance and rotation shows no dear tendency toward linear behavior. Similarly, the same tendency is observed in the relationship between lithium abundance and CaII flux in spite of these facts, subgiants with high lithium content also have high rotation and high CaII emission flux. We also observed that stars with high lithium content present, in its majority, an undeveloped convective envelope, whereas stars with low lithium content have a developed convective envelope. In the case of the rotation, stars with undeveloped convective envelope, show rotational velocities as much high as low, whereas stars with developed convective envelope only present low rotation

Two-dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach

The paper presents a new methodology to model material failure, in two-dimensional reinforced concrete members, using the Continuum Strong Discontinuity Approach (CSDA). The mixture theory is used as the methodological approach to model reinforced concrete as a composite material, constituted by a plain concrete matrix reinforced with two embedded orthogonal long fiber bundles (rebars). Matrix failure is modeled on the basis of a continuum damage model, equipped with strain softening, whereas the rebars effects are modeled by means of phenomenological constitutive models devised to reproduce the axial non-linear behavior, as well as the bondslip and dowel effects. The proposed methodology extends the fundamental ingredients of the standard Strong Discontinuity Approach, and the embedded discontinuity finite element formulations, in homogeneous materials, to matrix/fiber composite materials, as reinforced concrete. The specific aspects of the material failure modeling for those composites are also addressed. A number of available experimental tests are reproduced in order to illustrate the feasibility of the proposed methodology. (c) 2007 Elsevier B.V. All rights reserved.

A mixture theory based method for three-dimensional modeling of reinforce concrete members with embedded crack finite elements

The paper presents a methodology to model three-dimensional reinforced concrete members by means of embedded discontinuity elements based on the Continuum Strong Discontinuous Approach (CSDA). Mixture theory concepts are used to model reinforced concrete as a 31) composite material constituted of concrete with long fibers (rebars) bundles oriented in different directions embedded in it. The effects of the rebars are modeled by phenomenological constitutive models devised to reproduce the axial non-linear behavior, as well as the bond-slip and dowel action. The paper presents the constitutive models assumed for the components and the compatibility conditions chosen to constitute the composite. Numerical analyses of existing experimental reinforced concrete members are presented, illustrating the applicability of the proposed methodology.

Valor nutritivo de fenos de moringa (moringa oleifera lam) com diferentes idades de corte

This study was conducted to evaluate the consumption and digestibility of dry matter (DM), organic matter (OM), crude protein (CP), ether extract (EE), total carbohydrates (TC), non-fiber carbohydrates (NFC) and neutral detergent fiber (NDF) in sheep fed hay moringa (Moringa oleifera Lam) obtained with four cutting ages (28, 35, 42 and 49 days). We used 20 females Morada Nova breed, with 20kg of live weight, distributed in a completely randomized design and maintained in metabolism cages. There was a negative linear effect of age of cutting on DM intake, with an estimated maximum consumption of 0.67 kg / day for the hay produced at 28 days of cutting. It was also observed linear behavior, with an estimated maximum consumption 172g/dia, 0.36 kg / day; 18g/dia, at 35, 42 and 49 days old, for CP, OM and EE, respectively. For NDF, quadratic effect was found with advancing maturity of the plant. The apparent digestibility of DM, CP, OM and TC linearly decreased with advancing age of cutting hay Moringa oleifera. It was concluded that the hay Moringa oleifera showed better nutritional value after 28 days of cutting

Membranas de quitosana micro e macroporosas : preparo, caracterização e estudos de permeabilidade

Two methodologies were proposed to obtain micro and macroporous chitosan membranes, using two different porogenic agents. The methodologies proved to be effective in control the porosity as well as the pore size. Thus, microporous membranes were obtained through the physical blend of chitosan and polyethylene oxide (PEO) on an 80:20 (m/m) ratio, respectively, followed by the partial PEO solubilization in water at 80 ◦C. Macroporous chitosan membranes with asymmetric morphology were obtained using SiO2 as the porogenic agent. In this case, chiotsan-silica ratios used were 1:1, 1:3 and 1:5 (m/m). Membranes characterization were carried out by SEM (scanning electronic microscopy), X-ray diffraction, Fourier Transform Infrared Spectroscopy (FTIR), Thermal analysis (TG, DTG , DSC and DMTA). Permeability studies were performed using two model drugs: sodium sulfamerazine and sulfametoxipyridazine. By transmission FTIR it was possible to confirm the complete removal of SiO2. The SEM images confirmed the porous formation for both micro and macroporous membranes and also determined their respective sizes. By thermal analysis it was possible to show differences related with water sorption capacity as well as thermal stability for both membranes. DTG and DSC allowed evidencing the PEO presence on microporous membranes. The absorbance x time curves obtained on permeability tests for micro and macroporous membranes showed a linear behavior for both drugs in all range of concentration used. It was also observed, through P versus C curves, an increase in permeability of macroporous membranes according to the increase in porosity and also a decrease on P with increase in drug concentration. The influences of the drug molecular structure, as well as test temperatures were also evaluated

Otimização da síntese de nanoferritas de nizn dopada com cobre e cobalto

Different compositions of Ni0,5-xCuxZn0,5Fe2O4 and Ni0,5-xCoxZn0,5Fe2O4 0 ≤ x ≤ 0.3 were synthesized ferrite y the citrate precursor method. The stoichiometric compositions were calcined in air at 350°C and then pressed into pellets and toroids. The pressed samples were sintered at temperatures of 1000, 1050 and 1100°C/3h in air control at the speed of heating and cooling. The calcined powders were characterized by XRD, TGA / DTG, FTIR, SEM and vibrating sample magnetometry (VSM) and the sintered samples by XRD, SEM, MAV, density and measurements of permeability and magnetic losses. There was pure phase formation ferrimagnetism applied at all temperatures except for A-I composition at all sintering temperatures and A-II only at a temperature of 1100°C. Crystallite sizes were obtained by Rietveld analysis, nanometer size from 11 to 20 nm for the calcined powders. For SEM, the sintered samples showed grain size between 1 and 10 micrometers. Bulk density (ρ) of sintered material presented to the Families almost linear behavior with increasing temperature and a tendency to decrease with increasing concentration of copper, different behavior of the B Family, where the increase in temperature decreased the density. The magnetic measurements revealed the powder characteristics of a soft ferrimagnetic material. Two processes of magnetization were considered, the superparamagnetism at low temperatures (350°C) and the formation of magnetic domains at higher temperatures. Obtaining the best parameters for P and B-II magnetic ferrites at high temperatures. The sintered material at 1000°C showed a relative permeability (μ) from 50 to 800 for the A Family and from 10 to 600 for the B Family. The samples sintered at 1100°C, B Family showed a variation from 10 to 1000 and the magnetic loss (tan δ) of A and B Families, around of 1. The frequency response of the toroidal core is in the range of 0.3 kHz. Several factors contribute to the behavior of microstructure considering the quantities μ and tan δ, such as the grain size, inter-and intragranular porosity, amount of grain boundary and the aspects of the dynamics of domain walls at high frequencies.

Síntese pelo método pechini e caracterização da zircônia dopada com cério e neodímio

In this study five compositions were synthesized zirconia doped with cerium and neodymium ions in the system Ce10-xNdx Zr90O2 with 0,5 ≤ x ≤ 4,0 using the Pechini method. The powders were characterized by thermogravimetric analysis, differential thermal analysis, infrared spectroscopy and X-ray diffraction, with application of Rietveld refinement of the calcination temperatures of 350ºC/3h and 30 minutes at 900ºC/3h. All compositions stabilized with a mixture of cubic and tetragonal phase zirconia. The samples were pressed into bars and sintered at 1500°C/3h and 1500°C/6h, being characterized by Xray diffraction, with application of the Rietveld refinement, density and porosity using Archimedes method, scanning electron microscopy and resistance the three point bending. It has been observed the increase in strength with increasing sintering temperature for the compositions x = 2,0 and x = 4,0. For x = 2,0 the main phase was the cubic with 92,56% with crystallite size of 0,56 μm, density and porosity of 96,82% from 1,36%. For x = 4,0 was a mixture of cubic and tetragonal phase with 21% and 37,98%, respectively. The crystallite size was 54,21 nm and 49,64 nm with a density porosity of 97,45% and 1,32% respectively. In the analysis of the fracture surface was observed a greater amount of grain fracture intragranular type, which contribute to increase the mechanical strength of the ceramic. Increased addition of the neodymium ion in the crystal lattice of the zirconium showed a nearly linear behavior with increasing mechanical strength of the zirconia ceramic. Was obtained a bending resistance of 537 ± 38 MPa for the composition x = 2,0 predominantly attributed to cubic phase with 92,56%

Spectrofluorimetric Determination of Coumarin in Commercial Tablets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Studying nonlinear effects on the early stage of phase ordering using a decomposition method

Nonlinear effects on the early stage of phase ordering are studied using Adomian's decomposition method for the Ginzburg-Landau equation for a nonconserved order parameter. While the long-time regime and the linear behavior at short times of the theory are well understood, the onset of nonlinearities at short times and the breaking of the linear theory at different length scales are less understood. In the Adomians decomposition method, the solution is systematically calculated in the form of a polynomial expansion for the order parameter, with a time dependence given as a series expansion. The method is very accurate for short times, which allows to incorporate the short-time dynamics of the nonlinear terms in a analytical and controllable way. (c) 2005 Elsevier B.V. All rights reserved.

Multifractal regime transition in a modified minority game model

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comportamento voltamétrico da redução de 2-furfuraldeído em etanol utilizando eletrodo de carbono vítreo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Substituição do grão de sorgo por casca de soja na dieta de novilhos terminados em confinamento

Foi avaliado o efeito, no desempenho animal, da adição da casca do grão de soja em substituição ao grão de sorgo na fração concentrada da dieta de novilhos confinados na fase de terminação dos 19 aos 23 meses de idade. Os tratamentos foram correspondentes aos diferentes níveis de substituição do grão de sorgo por casca de soja: 0, 25, 50, 75 e 100%. A dieta com relação volumoso:concentrado de 60:40 continha 12% de proteína bruta. Analisando os dados por regressão, verificou-se comportamento quártico para ganho de peso diário e conversão alimentar, com valores de 1,040; 1,242; 1,167; 1,264 e 1,208 kg para ganho e de 8,490; 7,340; 7,611; 7,029 e 7,201 para conversão alimentar, respectivamente, nos níveis 0, 25, 50, 75 e 100% de substituição do sorgo pela casca de soja. Comportamento linear decrescente foi observado para consumo diário de matéria seca por 100 kg de peso vivo, com valores de 2,43; 2,46; 2,40; 2,37 e 2,32%, e por unidade de tamanho metabólico, de 106,5; 107,6; 105,4; 104,4 e 102,2 g, respectivamente. Verificou-se, por intermédio da análise de contrastes, que os animais alimentados com as dietas contendo casca de soja apresentaram melhores ganho de peso e conversão alimentar em relação aos alimentados com a dieta que continha somente sorgo.

Desempenho de bovinos jovens das raças Aberdeen Angus e Hereford, confinados e alimentados com dois níveis de energia

Estudou-se o desempenho de bovinos machos não-castrados das raças Aberdeen Angus (AA) e Hereford (HE) em confinamento, submetidos a dois níveis de energia, em esquema fatorial 2 x 2, sendo o menor nível com 3,07 e o maior com 3,18 Mcal/kg de energia digestível (12 e 32% de concentrado na dieta, respectivamente). Foram utilizados oito animais da raça AA e oito HE, com idade inicial de nove meses e peso médio inicial de 220,31 kg, que permaneceram confinados até que o peso da carcaça atingiu o mínimo de 190 kg (estimativa). Os animais da raça AA apresentaram maior consumo de MS, em % PV (2,27 vs 2,10%) e em g/kg0,75 (91,4 vs 86,4 g). Os animais que consumiram o maior nível de energia na dieta apresentaram maiores consumos de MS/dia (6,31 vs 5,71 kg), em PV (2,26 vs 2,11%) e em g/kg0,75 (92,28 vs 85,44 g), de energia digestível (ED), em Mcal/dia (20,58 vs 18,13 Mcal), e de PB, em kg/dia (0,845 vs 0,759 kg), além de maior ganho médio diário de peso (1,409 vs 1,250 kg). Os animais que consumiram o menor nível apresentaram maiores consumos de fibra em detergente neutro (FDN), em kg/dia (2,23 vs 2,07 kg), e de fibra em detergente ácido (FDA), em kg/dia (1,13 vs 1,01 kg). Os consumos de MS/dia, de FDN e de FDA, nos animais que consumiram o menor nível de energia, tiveram comportamento linear e, naqueles que receberam o maior nível, comportamento quadrático, frente aos períodos de confinamento. Para as características consumo de MS, em %PV e em g/kg0,75, nos tratamentos com menor nível de energia, o comportamento foi de forma cúbica e naqueles de maior nível, de forma quadrática. O consumo de ED apresentou, nos períodos, comportamento linear para o menor nível energético e cúbico para o maior nível.