A power line communication stack for metering, SCADA and large-scale domotic applications

This paper describes the communication stack of the REMPLI system: a structure using power-lines and IPbased networks for communication, for data acquisition and control of energy distribution and consumption. It is furthermore prepared to use alternative communication media like GSM or analog modem connections. The REMPLI system provides communication service for existing applications, namely automated meter reading, energy billing and domotic applications. The communication stack, consisting of physical, network, transport, and application layer is described as well as the communication services provided by the system. We show how the peculiarities of the power-line communication influence the design of the communication stack, by introducing requirements to efficiently use the limited bandwidth, optimize traffic and implement fair use of the communication medium for the extensive communication partners.

Linear and sliding-mode control design for matrix converter-based unified power flow controllers

This paper presents the design and compares the performance of linear, decoupled and direct power controllers (DPC) for three-phase matrix converters operating as unified power flow controllers (UPFC). A simplified steady-state model of the matrix converter-based UPFC fitted with a modified Venturini high-frequency pulse width modulator is first used to design the linear controllers for the transmission line active (P) and reactive (Q) powers. In order to minimize the resulting cross coupling between P and Q power controllers, decoupled linear controllers (DLC) are synthesized using inverse dynamics linearization. DPC are then developed using sliding-mode control techniques, in order to guarantee both robustness and decoupled control. The designed P and Q power controllers are compared using simulations and experimental results. Linear controllers show acceptable steady-state behaviour but still exhibit coupling between P and Q powers in transient operation. DLC are free from cross coupling but are parameter sensitive. Results obtained by DPC show decoupled power control with zero error tracking and faster responses with no overshoot and no steady-state error. All the designed controllers were implemented using the same digital signal processing hardware.

Application of genetic algorithms in the design of an electrical potential of fractional order

Fractional calculus (FC) is currently being applied in many areas of science and technology. In fact, this mathematical concept helps the researches to have a deeper insight about several phenomena that integer order models overlook. Genetic algorithms (GA) are an important tool to solve optimization problems that occur in engineering. This methodology applies the concepts that describe biological evolution to obtain optimal solution in many different applications. In this line of thought, in this work we use the FC and the GA concepts to implement the electrical fractional order potential. The performance of the GA scheme, and the convergence of the resulting approximation, are analyzed. The results are analyzed for different number of charges and several fractional orders.

Design optimization of cruciform specimens for biaxial fatigue loading

In order to correctly assess the biaxial fatigue material properties one must experimentally test different load conditions and stress levels. With the rise of new in-plane biaxial fatigue testing machines, using smaller and more efficient electrical motors, instead of the conventional hydraulic machines, it is necessary to reduce the specimen size and to ensure that the specimen geometry is appropriated for the load capacity installed. At the present time there are no standard specimen’s geometries and the indications on literature how to design an efficient test specimen are insufficient. The main goal of this paper is to present the methodology on how to obtain an optimal cruciform specimen geometry, with thickness reduction in the gauge area, appropriated for fatigue crack initiation, as a function of the base material sheet thickness used to build the specimen. The geometry is optimized for maximum stress using several parameters, ensuring that in the gauge area the stress is uniform and maximum with two limit phase shift loading conditions. Therefore the fatigue damage will always initiate on the center of the specimen, avoiding failure outside this region. Using the Renard Series of preferred numbers for the base material sheet thickness as a reference, the reaming geometry parameters are optimized using a derivative-free methodology, called direct multi search (DMS) method. The final optimal geometry as a function of the base material sheet thickness is proposed, as a guide line for cruciform specimens design, and as a possible contribution for a future standard on in-plane biaxial fatigue tests. © 2014, Gruppo Italiano Frattura. All rights reserved.

Matrix converter as unified power flow controller: design and implementation of decoupled direct power controllers

This paper presents the design and implementation of direct power controllers for three-phase matrix converters (MC) operating as Unified Power Flow Controllers (UPFC). Theoretical principles of the decoupled linear power controllers of the MC-UPFC to minimize the cross-coupling between active and reactive power control are established. From the matrix converter based UPFC model with a modified Venturini high frequency PWM modulator, decoupled controllers for the transmission line active (P) and reactive (Q) power direct control are synthesized. Simulation results, obtained from Matlab/Simulink, are presented in order to confirm the proposed approach. Results obtained show decoupled power control, zero error tracking, and fast responses with no overshoot and no steady-state error.

Kitchen robot prod. line development. Proj. of Bowden cables cutting and thermal forming machine.

This document presents particular description of work done during student’s internship in PR Metal company realized as ERASMUS PROJECT at ISEP. All information including company’s description and its structure, overview of the problems and analyzed cases, all stages of projects from concept to conclusion can be found here. Description of work done during the internship is divided here into two pieces. First part concerns one activities of the company which is robotic chefs (kitchen robot) production line. Work, that was done for development of this line involved several tasks, among them: creating a single-worker montage station for screwing robots housing’s parts, improve security system for laser welding chamber, what particularly consists in designing automatically closing door system with special surface, that protects against destructive action of laser beam, test station for examination of durability of heating connectors, solving problem with rotors vibrations. Second part tells about main task, realized in second half of internship and stands a complete description of machine development and design. The machine is a part of car handle latch cable production line and its tasks are: cutting cable to required length and hot-forming plastic cover for further assembly needs.

Derivation and consistency checking of models in early software product line engineering

Dissertação para obtenção do Grau de Doutor em Engenharia Informática

Design of a tool to study the fate of Chlamydia trachomatis infected cells

Chlamydia trachomatis has a unique obligate intracellular developmental cycle that ends by the lysis of the cell and/or the extrusion of the bacteria in order to allow for re-infections. While Chlamydia trachomatis infections are often asymptomatic the diagnosis of Chlamydia trachomatis is usually late, occurring after manifestation of persistency. Investigations on the consequences of long-term infections and the molecular mechanisms behind it will reveal light to what extent bacteria can modulate host cell function and what the ultimate fate of host cells after clearance of an infection is. Such studies on the host cell fate could be greatly facilitated if the infected cells become permanently marked during and after the infection. Therefore, this project intends to develop a new genetic tool that would allow permanently labeling of Chlamydia trachomatis host cells. The plan was to generate a Chlamydia trachomatis strain that encodes a recombinant CRE recombinase, fused to a secretory effector function of the Chlamydia type 3 secretion system (T3SS). Upon translocation into the host cell, this recombinant CRE enzyme could then, owing to its site-specific recombination function, switch a reporter gene contained in the host cell genome. To this end, the reporter line carried a membrane-tagged tdTomato (mT) gene flanked by two LoxP sequences followed by a GFP gene. The translocation of the recombinant CRE recombinase into this cell line was designed to trigger the recombination of the LoxP sites whereby the cells would turn from red fluorescence to green as an irreversible label of the infected cells. Successful execution of this mechanism would allow to draw a direct link between Chlamydia trachomatis infection and the subsequent fate of the infected cell.

What do broadband consumers want? Design and execution of a questionnaire on demand for bundled services on the Portuguese telecomunications market

The report addresses the question of what are the preferences of broadband consumers on the Portuguese telecommunication market. A triple play bundle is being investigated. The discrete choice analysis, adopted in the study, base on 110 responses, mainly from NOVA students. The data for the analysis was collected via manually designed on-line survey. The results show that the price attribute is relatively the most important one while the television attribute is being overlooked in the decision making process. Main effects examined in the research are robust. In addition, "extras" components are being tested in terms of users' preferences.

Estudo das tecnologias de interatividade no processo de compra em contexto das lojas de vestuário on-line

Dissertação de mestrado em Design de Comunicação de Moda

Basic biochemical investigations as rationale for the design of original antimalarial drugs. An example of phospholipid metabolism

The future of antimalarial chemotherapy is particulary alarming in view of the spread of parasite cross-resistances to drugs that are not even structurally related. Only the availability of new pharmacological models will make it possible to select molecules with novel mechanisms of action, thus delaving resistance and allowing the development of new chemotherapeutic strategies. We reached this objective in mice. Our approach is hunged on fundamental and applied research begun in 1980 to investigate to phospholipid (PL) metabolism of intraerythrocytic Plasmodium. This metabolism is abundant, specific and indispensable for the production of Plasmodium membranes. Any drug to interfere with this metabolism blocks parasitic development. The most effective interference yet found involves blockage of the choline transporter, which supplies Plasmodium with choline for the synthesis of phosphatidylcholine, its major PL, this is a limiting step in the pathway. The drug sensitivity thereshold is much lower for the parasite, which is more dependent on this metabolism than host cells. The compounds show in vitro activity against P. falciparum at 1 to 10 nM. They show a very low toxicity against a lymphblastoid cell line, demonstrating a total abscence of correlation between growth inhibition of parasites and lymphoblastoid cells. They show antimalarial activity in vivo, in the P. berghei or P. chabaudi/mouse system, at doses 20-to 100-fold lower than their in acute toxicity limit. The bioavailability of a radiolabeled form of the product seemed to be advantageous (slow blood clearance and no significant concentration in tissues). Lastly, the compounds are inexpensive to produce. They are stable and water-soluble.

Statmedia 3 : activitats on-line individualitzades d'estadística i matemàtiques als ensenyaments de Ciències Experimentals i Socials

El projecte Statmedia 3 ha consolidat definitivament la proposta de les assignatures Bioestadística de Biologia, Anàlisi de dades de Ciències Ambientals i d’Estadística Matemàtica de la Diplomatura renovant una part del material creat amb Statmedia 2. S’han inclòs a més Matemàtiques d’Ambientals i Introducció a la Probabilitat del Grau d’Estadística. L’anterior MQD abastava només pràctiques mentre que aquest projecte permet una oferta diversa d’activitats individualitzades. La individualització consisteix en que cada estudiant rep una proposta de cas personalitzada amb dades diferents. Les activitats poden ser programades presencialment o no, però la clau de l’èxit de l’activitat és que l’alumne obtingui reconeixement del seu treball en l’avaluació continuada. La valoració que fan als alumnes de Statmedia és molt bo, i observem que es produeix una millora en els resultats acadèmics. Statmedia 3 ha implicat un important esforç en la vessant informàtica del projecte, la barreja de tecnologies que utilitzem son punteres: Ajax, servlets i applets Java... Hem posat a punt un assistent on-line per dissenyar documents i planificar activitats que facilita la tasca dels professors. La nostre participació en primera línea del procés de convergència a l’EEES ens ha permès anticipar alguns canvis, i s’ha traduït en que el claustre del Departament d’Estadística assumís que Statmedia és una metodologia essencial dels seus plans docents. El projecte continua en un quart projecte MQD consecutiu, on desplegarem la nova tecnologia implementada. L’objectiu principal serà dotar a les assignatures dels 7 graus on participa el departament d’activitats individualitzades en forma de casos pràctics, problemes i proves diverses. La col·lecció de material emmagatzemada en la nostra biblioteca, forjada després de quasi deu anys de treball continuat, juntament amb l’experiència acumulada de com utilitzar Statmedia de la forma més eficient han començat a ser explotades en els nous graus aquest mateix curs 2009-2010.

A long, naturally presented immunodominant epitope from NY-ESO-1 tumor antigen: implications for cancer vaccine design.

The tumor antigen NY-ESO-1 is a promising cancer vaccine target. We describe here a novel HLA-B7-restricted NY-ESO-1 epitope, encompassing amino acids 60-72 (APRGPHGGAASGL), which is naturally presented by melanoma cells. The tumor epitope bound to HLA-B7 by bulging outward from the peptide-binding cleft. This bulged epitope was not an impediment to T-cell recognition, however, because four of six HLA-B7(+) melanoma patients vaccinated with NY-ESO-1 ISCOMATRIX vaccine generated a potent T-cell response to this determinant. Moreover, the response to this epitope was immunodominant in three of these patients and, unlike the T-cell responses to bulged HLA class I viral epitopes, the responding T cells possessed a remarkably broad TCR repertoire. Interestingly, HLA-B7(+) melanoma patients who did not receive the NY-ESO-1 ISCOMATRIX vaccine rarely generated a spontaneous T-cell response to this cryptic epitope, suggesting a lack of priming of such T cells in the natural anti-NY-ESO-1 response, which may be corrected by vaccination. Together, our results reveal several surprising aspects of antitumor immunity and have implications for cancer vaccine design.

PFC J2EE : botiga de Llibres On-Line KIWIX

L'objectiu del present Projecte final de carrera consisteix en la realització d'un dissenye implementació d'un lloc web de venta de llibres al detall.El sistema mostra a l'usuari una sèrie de productes. Tots aquest productespoden ser adquirits per l'usuari prèvia identificació i validació de les dades.

Proyecto para una tienda On-Line

El present document pretén descriure les tasques generals realitzades en els diferents processos d'Anàlisi, Disseny i posta en funcionament, així com els resultats generats per cada un, dins del desenvolupament d'una aplicació de compra electrònica a través d'Internet, realitzada amb tecnologia J2EE.