Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO2 emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production. Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO 2 emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions. Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement. © 2011 Elsevier B.V. All rights reserved.

Feeding behavior and food preference of Penaeus monodon Fabricius with scrap tilapia

The time of day during which P. monodon feeds at different depth levels in earthen ponds, and its preference for three types of tilapia feeds (dry, fresh and fermented) were determined. It was observed that P. monodon concentrated at the bottom beds during the day and along the periphery of dikes during night-time, with a slight tendency to swim and feed towards the surface as darkness increased. P. monodon showed special preference for dried tilapia compared to fresh and fermented tilapia. P. monodon also showed adaptability to the platform method of feeding, especially during night-time.

Rationales of holonic manufacturing systems in leather industry

This paper presents an insight into leather manufacturing processes, depicting peculiarities and challenges faced by leather industry. An analysis of this industry reveals the need for a new approach to optimize the productivity of leather processing operations, ensure consistent quality of leather, mitigate the adverse health effects in tannery workers exposed to chemicals and comply with environmental regulation. Holonic manufacturing systems (HMS) paradigm represent a bottom-up distributed approach that provides stability, adaptability, efficient use of resources and a plug and operate functionality to the manufacturing system. A vision of how HMS might operate in a tannery is illustrated presenting the rationales behind its application in this industry. © 2013 Springer-Verlag.

Scrap of paper with numbers of railway journals volume numbers, n.d.

Scrap of paper with numbers of railway journals volume numbers, n.d.

Scrap of a letter

Scrap of a letter [most of the text including salutation and signature is missing], Dec. 1855

A torn scrap of paper which gives estimates of times worked for Fred Holmes, Joe Simpson, John Simpson, William Baird and William Case

A torn scrap of paper which gives estimates of times worked for Fred Holmes, Joe Simpson, John Simpson, William Baird and William Case. Much of the text is missing. This is signed by Fred Holmes, Dec. 1857.

Properties of ectin isolated from Lawulu (Crysophylum roxbergi G Don) and development of jam and fruit leather using Lawulu and pineapple

Lawulu fruit (Crysophylum roxberghi GDon) possess nutritional, medicinal and functional properties. However, it is less consumed due to its  characteristic off flavour. The present study was carried out to investigate the potential of utilizing lawulu fruit for isolation of pectin and to develop jam and fruit leather. Products were evaluated based on physico-chemical and sensory properties.

Pectin isolated fromf irm ripe lawuluf ruit using 0.1 M hydrochloric acid  followed by 96% ethanol precipitation yielded 7. 3% pectin on wet weight basis and 26.1% on dry weight basis. The isolated pectin contained 0.74% ash, 0.02% acetyl content and 7.85% methoxyl content with equivalent weight 993.5. These values were comparable with commercial high methoxyl pectin. In addition, Iawulu pectin at 1.5% concentration formed a gel within 12-14 min in the presence of 68% sucrose and 0.5% citric acid.

Jam was prepared by using Iawulu-pineapple ratio as 1:2, 1:1 and 2:1 respectively. The gel strength of jam (65⁰ Brix and pH 3.1) at 0.35% commercial high methoxyl pectin was comparable with commercial mixed fruit jam. Sensory evaluation indicated a significant preference (p<.05) for jam containing lawulu-pineapple ratio of 1:2 and 1.1 respectively overthe ratio of 2:1. With increased lawulu percentage both yellowness and lightness of jam increased significantly (p<0.05).

Fruit leather was prepared by changing lawulu-pineapple ratio as 1:2, 1:1 and 2:1 respectively with 20% sucrose, 0.3% citric acid, 0.05% pectin and 100 ppm potassium metabisulphite followed by drying at 65±1⁰C for 12-14 h. Sensory evaluation data revealed that changes in lawulu-pineapple ratio had no significant effect on taste, texture and overall quality of fruit leather.   However, significant preference (p<0.05) for colour was observed with increasing lawulu percentage. Both yellowness (b' value) and lightness (L'value) of fruit leather were sign[icantly increased (p<0.05) with increasing lawulu percentage.

Photoeletrocatalytic oxidation of anionic surfactant used in leather industry on nanoporous Ti/TiO2 eletrodes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simultaneous removal of chromium and leather dye from simulated tannery effluent by photoelectrochemistry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of genotype on the quality of sheep leather

The objective of this study was to evaluate the influence of crossings between sheep breeds on the intrinsic quality of leather. It was used the skins of 36 lambs (18 females and 18 males), resulting from crosses between ewes of a native breed from the Brazilian state of Mato Grosso do Sul and rams of the same native breed as well as the Texel and Santa Inês genetic groups. The animals were raised in confinement until slaughter weight, from 28 to 32 kg. After slaughter, samples were taken from the skins for histological analysis. The skins were tanned with chromium, retanned and greased. It was taken from the leather samples for electromicrographs and for tests for tensile and tear strength (intrinsic quality). Morphological aspects from the skin as well as from the leather help to understand the results found and they evidence that breeds or crossings among breeds interfere in the intrinsic quality of leather and skin of sheep.

Recycling leather waste: preparing and studying on the microstructure, mechanical, and rheological properties of leather waste/rubber composite

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Recycling leather waste: preparing and studying on the microstructure, mechanical, and rheological properties of leather waste/rubber composite

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Synthesis of high-surface-area gamma-Al2O3 from aluminum scrap and its use for the adsorption of metals: Pb(II), Cd(II) and Zn(II)

Several types of alumina were synthesized from sodium aluminate (NaAlO2) by precipitation with sulfuric acid (H2SO4) and subsequently calcination at 500 degrees C to obtain gamma-Al2O3. The precursor aluminate was derived from aluminum scrap. The various gamma-Al2O3 synthesized were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), adsorption-desorption of N-2 (S-BET) and scanning electron microscopy (SEM). XRD revealed that distinct phases of Al2O3 were formed during thermal treatment. Moreover, it was observed that conditions of synthesis (pH, aging time and temperature) strongly affect the physicochemical properties of the alumina. A high-surface-area alumina (371 m(2) g(-1)) was synthesized under mild conditions, from inexpensive raw materials. These aluminas were tested for the adsorption of Cd(II), Zn(II) and Pb(II) from aqueous solution at toxic metal concentrations, and isotherms were determined. (C) 2012 Elsevier B.V. All rights reserved.

The Electrolytic Recovery of Copper and Zinc from Scrap Brass with Special Reference to Lead-Bearing Brass.

Several methods have been investigated, with some success, for treating scrap brass to recover copper and zinc, either as pure metals or as salts of the metals. One of the more promising of these methods is electrolysis in sulfate solution for the recovery of pure copper and zinc.

Microstructural, chemical and isotopic evidence for the origin of late neolithic leather recovered from an ice field in the Swiss Alps

Archaeological leather samples recovered from the ice field at the Schnidejoch Pass (altitude 2756 m amsl) in the western Swiss Alps were studied using optical, chemical molecular and isotopic (δ13C and δ15N of the bulk leather, and compound-specific δ13C analyses of the organic-solvent extracted fatty acids) methods to obtain insight into the origin of the leather and ancient tanning procedures. For comparison, leathers from modern native animals in alpine environment (red deer, goat, sheep, chamois, and calf/cow) were analyzed using the same approach. Optical and electron microscopically comparisons of Schnidejoch and modern leathers showed that the gross structure (pattern of collagen fibrils and intra-fibrils material) of archaeological leather had survived essentially intact for five millennia. The SEM studies of the hairs from the most important archaeological find, a Neolithic leather legging, show a wave structure of the hair cuticle, which is a diagnostic feature for goatskins. The variations of the bulk δ13C and δ15N values, and δ13C values of the main fatty acids are within the range expected for pre-industrial temperate C3 environment. The archaeological leather samples contain a mixture of indigenous (from the animal) and exogenous plant/animal lipids. An important amount of waxy n-alkanes, n-alkan-1-ols and phytosterols (β-sitosterol, sitostanol) in all samples, and abundant biomarker of conifers (nonacosan-10-ol) in the legging leathers clearly indicate that the Neolithic people were active in a subalpine coniferous forest, and that they used an aqueous extract of diverse plant material for tanning leather.