Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 degrees C

Although some researchers have published friction and wear data of Plasma Nitride (PN) coatings, the tribological behavior of PN/PN Pairs in high vacuum environment has not been published so far In order to bridge this knowledge gap, tribological tests under dry conditions have been conducted on PN/PN Pairs for varying temperatures of 25, 200, 400 and 500 degrees C in high vacuum (1.6 x 10(-4) bar) environment. The PN coatings showed good wear resistance layer on the ring surface. The PN coatings were removed only from the pin surface for all the tests since it contacts at a point. The friction and wear were low at lower temperatures and it eliminated adhesion between the contact surfaces until the coating was completely removed from the pin surface. (C) 2011 Journal of Mechanical Engineering. All rights reserved.

Anderson transitions in Ln1-x Sr x CoO3 (Ln═Pr or Nd)

Electrical conductivity measurements show that Ln1-x Sr x CoO3, (Ln = Pr or Nd) undergoes a non-metal-metal transition when x≈0 3. The d.c. conductivity of compositions with 0

Rare-earth carboxylates, Ln(2)(III)(mu(3)-OH)(C4H4O5)(2)(C4H2O4)]center dot 2H(2)O Ln = Ce, Pr and Nd]: synthesis, structure and properties

A new series of inorganic-organic hybrid framework compounds, Ln(2)(mu(3)-OH)(C4H4O5)(2)(C4H2O4)]center dot 2H(2)O, (Ln = Ce, Pr and Nd), have been prepared employing a hydrothermal method. Malic acid and fumaric acid form part of the structure. The malate units connect the lanthanide centers forming Ln-O-Ln two-dimensional layers, which are cross-linked by the fumarate units forming the three-dimensional structure. Extra framework water molecules form a dimer and occupy the channels. The water molecules can be reversibly adsorbed. The dehydrated structure did not show any differences in framework structure/ connectivity. The presence of lattice water provides a pathway for proton conductivity. Optical studies suggest an up-conversion behavior involving more than one photon for a neodymium compound.

Robust dielectric properties of B-site size-disordered hexagonal Ln(2)CuTiO(6) (Ln = Y, Dy, Ho, Er, and Yb)

Hexagonal Ln(2)CuTiO(6) (Ln = Y, Dy, Ho, Er, and Yb) exhibits a rare combination of interesting dielectric properties, in the form of relatively large dielectric constants (epsilon' > 30), low losses, and extremely small temperature and frequency dependencies, over large ranges of temperature and frequency Choudhury et al., Appl. Phys. Lett. 96, 162903 (2010) and Choudhury et al., Phys. Rev. B 82, 134203 (2010)], making these compounds promising as high-k dielectric materials. The authors present a brief review of the existing literature on this interesting class of oxides, complimenting it with spectroscopic data in conjunction with first-principles calculation results, revealing a novel mechanism underlying these robust dielectric properties. These show that the large size differences in Cu2+ and Ti4+ at the B-site, aided by an inherent random distribution of CuO5 and TiO5 polyhedral units, frustrates the ferroelectric instability, inherent to the noncentrosymmetric P6(3) cm space group of this system, and gives rise to the observed relatively large dielectric constant values. Additionally, the phononic contributions to the dielectric constant are dominated primarily by mid-frequency (>100 cm(-1)) polar modes, involving mainly Ti4+ 3d(0) ions. In contrast, the soft polar phonon modes with frequencies typically less than 100 cm(-1), usually responsible for dielectric properties of materials, are found to be associated with non-d(0) Cu2+ ions and to contribute very little, giving rise to the remarkable temperature stability of dielectric properties of these compounds. (C) 2014 American Vacuum Society.

Comparative study of Eu3+ -activated LnOCl (Ln=La and Gd) phosphors and their Judd-Ofelt analysis

Eu3+-activated layered LnOCl (Ln=La and Gd) phosphors were synthesized by the conventional solid-state method at relatively low temperature (700 degrees C) and shorter duration of 2 h. The structural parameters were refined by the Rietveld refinement analysis and confirmed by the high resolution transmission electron microscopy (HRTEM). Both the compounds were crystallized in the tetragonal structure with space group P4/nmm (No. 129). The homogeneity of the elements were analyzed by TEM mapping and found to be uniformly distributed. The photoluminescence spectra revealed that the intensity of D-5(0)-> F-7(2) transition (619 nm) was more intense in Eu3+-activated GdOCl compared to LaOCl. This was due to the property of Gd3+ ions to act as an intermediate sublattice to facilitate the energy transfer to Eu3+ ions. Intensity parameters and radiative properties such as transition probabilities, radiative lifetime and branching ratio were calculated using the Judd-Ofelt theory. The CIE color coordinates result revealed that the Eu3+-activated GdOCl (0.641, 0.354) phosphor was close to the commercial red phosphors like, Y2O3:Eu3+ (0.645, 0.347), (Y2OS)-S-2:Eu3+ (0.647, 0.343) and National Television System Committee (NTSC) (0.67, 0.33). The results suggest that the present GdOCl:Eu3+ compound acts as a potential candidate for red phosphor materials.

Dispersible crystalline nanobundles of YPO4 and Ln (Eu, Tb)-doped YPO4: rapid synthesis, optical properties and bio-probe applications

Undoped and Ln(3+) (Eu and Tb)-doped crystalline nanobundles of YPO4 were prepared by a facile microwave-assisted route with water as a solvent and without using any surfactant. TEM investigations reveal that the as-prepared powder consists of lenticular-shaped nanobundles (similar to 100 nm in diameter) made of very small nanorods with diameter less than 10 nm and length varying from 20 to 50 nm. Each nanorod in turn is single crystalline, as revealed by HRTEM imaging. The as-prepared nanobundles are easily dispersible in various solvents, especially water, without any surface functionalization, which is critical for various bio-probe applications like cell and tissue imaging. The Eu- and Tb-doped YPO4 nanobundles show good photoluminescence properties and were further evaluated for their use as fluorescent biolabels. Our results show that HeLa cells labelled with Eu- and Tb-doped YPO4 nanobundles show bright red (Eu) and green (Tb) intracellular luminescence under a confocal microscope. Concentration-and time-dependent MTT cell viability assays show that the nanobundles show low toxicity towards cells which makes them promising in bioimaging field.

Crystal structure and phase transition studies in perovskite-type oxides using powder-diffraction techniques and symmetry-mode analysis : SrLnMRuO6 (Ln=La,Pr,Nd; M=Zn,Co,Mg,Ni,Fe) and ALn2CuTi2O9 (A=Ca,Ba; Ln=La,Pr,Nd,Sm)

La tesis se ha centrado en la síntesis y caracterización estructural de materiales tipo perovskita: SrLnMRuO6 (Ln=La,Pr,Nd; M=Zn,Co,Mg,Ni,Fe) y ALn2CuTi2O9 (A=Ca,Ba; Ln=La,Pr,Nd,Sm). El estudio de las estructuras de los materiales se ha realizado mediante el análisis de los patrones de difracción en polvo de rayos-X, sincrotrón y/o neutrones. En el refinamiento por el método de Rietveld de las estructuras se han sustituido las coordenadas atómicas (el método más común), por coordenadas colectivas: las amplitudes de los modos que describen la distorsión de la fase prototipo. Los resultados generales para la serie SrLnMRuO6 (Ln=La,Pr,Nd; M=Zn,Co,Mg,Ni) a temperatura ambiente se ha recogido en un diagrama en el que se han indicado las amplitudes de los modos que transforman de acuerdo a las irreps en función del factor de tolerancia, ya que todos ellos cristalizan en la misma fase monoclínica (P21/n); y a temperaturas altas se ha construido un diagrama de fase. Los materiales SrLnFeRuO6 ( Ln=La,Pr,Nd) y CaLn2CuTi2O9 cristalizan en la fase ortorrómbica Pbnm a temperatura ambiente; mientras que BaLn2CuTi2O9 tienen una estructura más simétrica, I4/mcm. A altas temperaturas se han identificado las transiciones de fase inducidas por el cambio de temperatura.A temperaturas bajas se han analizado las estructuras magnéticas de algunos de los compuestos mediante difracción de neutrones.

Modulação por Sucupira (Pterodon polygalaeflorus, Benth) da distribuição de Linfócitos T ativados e T de memória em linfonodos (LN) de camundongos com Artrite Induzida por Colágeno tipo II (CIA) e da mielopoiese em baços de camundongos primados com Adjuvante Completo de Freund (AFC)

Sementes de árvores do gênero Pterodon, conhecidas principalmente pelo nome Sucupira, são utilizadas popularmente para o tratamento de doenças reumáticas. Na presente dissertação, temos como objetivo estudar a possível ação do extrato hidroalcoólico de sementes de Pterodon polygalaeflorus (EHPp) no tratamento de Artrite Induzida por Colágeno tipo II (CIA) em camundongos DBA/1J. Verificou-se a distribuição de Linfócitos T CD4+ com fenótipo de memória em linfonodos de animais com CIA; a possível interferência do tratamento no segundo aumento de células mielóides (Mac-1+) esplênicas gerado pela segunda injeção de colágeno tipo II (CII) para indução da CIA e confirmou-se o fenótipo granulocítico dessas células mielóides. Além disso, através de outro modelo experimental de 10 dias de duração, objetivou-se estudar as células mielóides Mac-1+: se o tratamento com EHPp interfere na mielopoese esplênica induzida somente pela injeção de Adjuvante de Freund Completo (AFC) em camundongos DBA1/J e avaliar uma eventual diferença entre o grau de ativação dessas células em animais primados com AFC tratados ou não com EHPp. A CIA foi induzida em camundongos DBA/1J machos, por injeção intradérmica (i.d.) de CII em AFC com reforço intraperitonial de CII três semanas após a primeira injeção. O tratamento oral, diário, com EHPp por cerca de 30 dias foi iniciado no dia do reforço com CII. No modelo de curta duração, com o intuito de verificar o possível aumento de células Mac-1+ no baço, os animais foram tratados oralmente com EHPp, por 9 dias, sendo o AFC injetado, i.d., no 5o dia do tratamento e os animais sacrificados no 10o. Os resultados obtidos foram: o tratamento com EHPp interfere na distribuição de Linfócitos T com fenótipo de memória em animais com indução de CIA; resultados preliminares sugerem que o tratamento com EHPp não interfere no segundo aumento de células mielóides no baço no modelo CIA; a maioria das células mielóides presentes no baço de animais sadios ou de animais com CIA apresenta fenótipo granulocítico (GR.1+); o tratamento com EHPp reduz significantemente a mielopoese esplênica induzida pela injeção de AFC; a fração significante de células Mac-1+ no baço de animais primados com AFC apresenta aumento de produção de Espécies Reativas de Oxigênio em relação aos animais sadios ou tratados com EHPp. Em conjunto, estes resultados permitem identificar uma possível ação anti-inflamatória do EHPp ao impedir o aumento de células inflamatórias no baço de animais primados com AFC, bem como uma atividade imunossupressora, evidenciada pela redução de Linfócitos com perfil de recém ativação e de Linfócitos com perfil de memória nos LNs em relação aos animais com CIA, sugerindo o seu envolvimento nos processos de ativação e de migração linfocitários.

The effect of Ln(III)/An(III) separation on TRU multi-recycling in CONFU assembly

This work examines the basic feasibility of the net-zero-balance TRU multi-recycling concept in which trivalent lanthanide fission products (Ln(III) ) are not separated from trivalent actinides (An(III)). The TRU together with Eu and Gd isotopes are recycled in a standard PWR using Combined Non-Fertile and UO2 (CONFU) assembly design. The assembly assumes a heterogeneous structure where about 20% of U02 fuel pins on the assembly periphery are replaced with Inert Matrix Fuel (IMF) pins hosting TRU, Gd, and Eu generated in the previous cycles. The 2-D neutronic analysis show potential feasibility of Ln / An recycling in PWR using CONFU assembly. Recycling of Ln reduces the fuel cycle length by about 30 effective full power days (EFPD) and TRU destruction efficiency by about 5%. Power peaking factors and reactivity feedback coefficients are close to those of CONFU assembly without Ln recycling.

Full-color emission from In2S3 and ln(2)S(3): Eu3+ nanoparticles

New observations on the luminescence Of In2S3 and europium-doped In2S3 nanoparticles show a green (5 10 nm) emission from In2S3 and In1.8Eu0.2S3 nanoparticles while a blue (425 nm) emission is observed from ln(1.6)Eu(0.4)S(3) nanoparticles. Both the blue and green emissions have large Stokes shifts of 62 and 110 nm, respectively. Excitation with longer-wavelength photons causes the blue emission to shift to a longer wavelength while the green emission wavelength remains unchanged. The lifetimes of both the green and blue emissions are similar to reported values for excitonic recombination. When doped with Eu3+, in addition to the broad blue and green emissions, a red emission near 615 nm attributed to Eu3+ is observed. Temperature dependences on nanoparticle thin films indicate that with increasing temperature, the green emission wavelength remains constant, however, the blue emission shifts toward longer wavelengths. Based on these observations, the blue emission is attributed to exciton recombination and the green emission to Indium interstitial defects. These nanoparticles show full-color emission with high efficiency, fast lifetime decays, and good stability; they are also relatively simple to prepare, thus making them a new type of phosphor with potential applications in lighting, flat-panel displays, and communications.

InAs/ln(0.52)Al(0.48)As quantum wire structure with the specific layer-ordering orientation on InP(001)

Quantum wires were formed in the 6-period InAs/In0.52Al0.48As structure on InP(0 0 1) grown by molecular beam epitaxy. The structure was characterized with transmission electron microscopy. It was found that the lateral periodic compositional modulation in the QWR array was in the [1 (1) over bar 0] direction and layer-ordered along the specific orientation deviating from the [0 0 1] growth direction by about 30 degrees. This deviating angle is consistent with the calculation of the distribution of elastic distortion around quantum wires in the structure using the finite element technique. (C) 1999 Elsevier Science B.V. All rights reserved.

Ln-Ba-Cu-Ag-O多元复合物制备、结构及电学性质的研究

本文合成了LnBa_2Cu_(3(1-x))Ag_xO_(7-δ) (x = 0.1,0.3,0.5, Cu = Y,Dy,Ho,Er,Gd) YBa_(2(1-x))Cu_3Ag_xO_(7-δ) (x = 0.05,0.1,0.2,0.3,0.4,0.5,0.6); Y_(1-x)Ag_xBa_2Cu_3O_(7-δ) (x = 0.05,0.1,0.2,0.3,0.5); YBa_2Cu_3O_(7-δ)Ag_x (x = 0.2～2.0), CuBaCu_3O_(7-δ)Ag_x (x = 0.5,1.0, Cu = Dy,Ho,Er)及与之对照的空白样品等一系列超导稀土复合氧化物，对它们的结构、电学性质、Ag的存在状态及Ag的加入方式进行了研究。对这方面的研究目前仍无全面系统的报道。对CuBa_2Cu_(3(1-x))Ag_xO_(7-δ)的研究表明Ag并未取代Cu的格位，少量的Ag加入（x<0.1）就使结构发生破坏，当x>0.1时样品即失去超导性，对光加Ag的YBa_(2(1-x))Cu_3Ag_(2x)Cu_3O_(7-δ)的研究表明，当x<0.6时仍为90k左右的超导体，Ag没有取代Ba的格位，Ag的加入使杂相比例加大，Ag的加入改善了样品晶粒间的弱连接状况，使电流密度明显提高，Ag以单质及复合物形式存在于样品之中。后加Ag方式对结构、电性、无影响没有提高Jc。对光加Ag的Y_(1-x)Ag_xBa_2Cu_3O_(7-δ)的研究表明，x<0.5时样品仍为90k左右超导体，Ag的加入使杂相比例减少，Ag部分以单质及与13a、Cu形成对改善弱连接状有益的复合场的形式存在，部分进入晶格可能占据了Y的格位使C轴变长。Ag的加入改善了样品晶粒间的弱连接状况，从而使Jc大幅度提高，当x=0.1时Jc = 362 A/cm~2，后加Ag的方式对结构、电性、无影响没有提高Jc。对YBa_2Cu_3O_(7-δ)Ag_x的研究表明，加Ag的样品的Jc比不加Ag样品的Jc明显加大，随着Ag量的加大Jc增加，当x=1时Jc最大，当Ag量大于2.0mol时将有大量Ag析出，Ag的加入不影响超导正交结构，部分Ag进入了晶格可能占据了Y的格位，C轴增长，部分以单质及复合物的形式存在，Ag的加入不影响样品的临界温度，使样品电阻降低，电镜分析表明，Ag的加入改善了样品晶粒间的连接状况。CuBaCu_3O_(7-δ)Ag_x与上面体子有相同的性质，在加入1mol Ag得到，Jc：DyBaCu_3O_(7-δ)Ag_(1.0) 113A/cm~2；HoBaCu_3O_(7-δ)Ag_(1.0) 164 A/cm~2 ErBaCu_3O_(7-δ)Ag_(1.0) 177A/cm~2的样品。样品加Ag后密度明显加大，最大可达6.321克/cm~3，硬度也加大具有良好的机械性能。针对在YBaCu_3O_(7-δ)样品中添加Ag，可以做为一种大幅度提高Jc的途径的特点，进行了各种工艺探索，到目前为止，合成出了临界电流密度为570 A/cm~2的样品。