Inventario y descripción de los hornos de cal en el agrosistema tradicional de la Finca Buixcarró (P.N. Sierra de Mariola)

Se ha realizado un inventario de los hornos de cal en la Finca Buixcarró, término municipal de Bocairente (Valencia), situada en el Parque Natural de la Sierra de Mariola. Para localizar los hornos, se ha contado con la colaboración del responsable técnico y también se fotointerpretarán mediante la aplicación Google Earth, con tal de encontrar los hornos. Para ello se elaborará una capa de puntos con formato *.kml, posteriormente introduciremos en al GPS, mediante el software (MapSource). Se muestreó la finca en búsqueda de hornos y se georreferenció cada uno de ellos mediante la utilización de un dispositivo GPS, generando un waypoint con su X-Y correspondiente. Una vez georreferenciados los hornos de la finca con formato *.gpx, se elaboró la cartografía correspondiente. Se utilizará GPSBabel y QuantumGis para elaborar la cartografía de los hornos de cal. Se han registrado un total de 24 hornos de cal, de los cuales el 60% presentan un estado de degradación bastante elevado. Se han identificado 20 categorías de usos del suelo, siendo el bosque mixto (Pinus halepensis – Quercus ilex) y el pinar carrasco (Pinus halepensis) las coberturas que mayor superficie ocupan. El inventariado de estas infraestructuras contribuye a la conservación del patrimonio material y cultural de este espacio natural protegido.

Burning clay wares.

Mode of access: Internet.

The modern manufacture of Portland cement : a handbook for manufacturers, users, and all interested in Portland cement /

Subsequent vols. never published.

Rear elevation of new dry kiln & store shed

The hospital heating plant (1897-1925) stood just north and downhill from the Dermatology Ward. The university railroad (1914) ran north of the heating plan and just east of Glen.

Application of ICP-MS trace element analysis in study of ancient Chinese ceramics

Thirty-nine trace elements of the Song-Yuan period (960-1368 AD) porcelain bodies from Cizhou, Jizhou and Longquanwu kilns were analyzed with ICP-MS, a technique rarely used in Chinese archaeometry, to investigate its potential application in such studies. Trace element compositions clearly reflect the distinctive raw materials and their mineralogy at the three kilns and allow their products to be distinguished. Significant chemical variations are also observed between Yuan and Song-Jing dynasties samples from Cizhou as well as fine and coarse porcelain bodies from Longquanwu. In Cizhou, porcelains of better quality which imitate the famous Ding kiln have trace element features distinctive from ordinary Cizhou products, that indicates geochemically distinctive raw materials were used and which possibly also underwent extra refining prior to use. The distinct trace element features of different kilns and the various types of porcelains from an individual kiln can be interpreted from a geochemical perspective. ICP-MS can provide a large amount of valuable information about ancient Chinese ceramics as it is capable of analyzing >40 elements with a typical of precision < 2%.

Rotary moulding of ceramic hollow wares

A novel processing method for the fast and economic production of hollow ceramic components has been developed by combining in situ coagulation moulding with a modified version of the technique of rotary moulding[Binner, J. G. P., Al-Dawery, I. A., Tari, G. and Yan, Y., Rotary casting technique. UK Patent application No. 0506349.0, March 2005], the latter being adapted from the polymer industry. The process was found to require a high solids content suspension, hence development work was performed in this direction though in the end a new, commercial suspension was utilised. Of the three forming routes of gel casting, direct coagulation casting and in situ coagulation moulding, the latter was found to be the most promising for the new process of rotary moulding of ceramics. Due to the low value of clay-based ceramics, a new low cost coagulant was identified and the effect of lactone concentration and temperature on setting time determined. Following substantial optimisation work, it was found that a two-speed approach to multi-axial rotation was the most successful; medium sized cream jugs could be produced in just 7 min. With respect to mould materials, the porous resin normally used for pressure casting of sanitary ware was found to be the best option, though since this is quite expensive conventional plaster-of-paris moulds were found to be a suitable material to enable companies, particularly SMEs, to become familiar with the technology whilst avoiding high costs for trials. The processed articles could be successfully fired and glazed using gas-fired kilns with no sign of any black cores. Major advantages of the process include the ability to precisely calculate the amount of ceramic slip required, eliminating either slip wastage or the need to pour used slip back into the virgin material as currently happens with slip casting. In addition, since the precursor suspension has a very high solids content, the time and energy required to dry the green product and associated moulds has been considerably reduced. © 2008 Elsevier Ltd. All rights reserved.

Salted-Fish industry in Roman Lusitania: Trade Memories between Oceanus and Mare Nostrum

Initiated by Augustus, Rome’s Atlantic policy seems to have been consolidated in the age of Claudius, with the acknowledgement of the economic potential offered by the Atlantic region. It is in this context that we must understand the development of the salted-fish industry in Lusitania. In the same geographical contexts, and in close relationship with fish-processing factories, are known about 20 pottery centres producing amphorae, located in the regions of Peniche, Sado and Tejo valleys, and the coasts of Alentejo and Algarve. This production extended in time beyond the end of the Western Roman Empire and up to the end of the 5th and 6th centuries, according to the archaeological data of some amphora kilns and fish-processing sites. The identification of Lusitanian amphorae in distant consuming centres and several shipwrecks in the Mediterranean basin confirm the long-distance commerce and the total integration of this “peripheral” region into the trade routes of the Roman Empire.

Efeito da velocidade de aquecimento nas propriedades de produtos da cerâmica estrutural

Heating rate is one of the main variables that determine a fire cycle. In industrial processes that use high temperatures, greater fire great can reduce the cost of production and increase productivity. The use of faster and more efficient fire cycles has been little investigated by the structural ceramic industry in Brazil. However, one of the possibilities that aims at modernizing the sector is the use of roller kilns and the inclusion of natural gas as fuel. Thus, the purpose of this study is to investigate the effect of heating rate on the technological properties of structural ceramic products. Clay raw materials from the main ceramic industries in the state of Rio Grande do Norte were characterized. Some of the raw materials characterized were formulated to obtain the best physical and mechanical properties. Next, raw materials and formulations were selected to study the influence of heating rate on the final properties of the ceramic materials. The samples were shaped by pressing and extrusion and submitted to rates of 1 °C/min, 10 °C/min and 20 °C/min, with final temperatures of 850 °C, 950 °C and 1050 °C. Discontinuous cycles with rates of 10 °C/min or 15 °C/min up to 600 °C and a rate of 20 °C/min up to final temperature were also investigated. Technological properties were determined for all the samples and microstructural analysis was carried out under a number of fire conditions. Results indicate that faster and more efficient fire cycles than those currently in practice could be used, limiting only some clay doughs to certain fire conditions. The best results were obtained for the samples submitted to slow cycles up to 600 °C and fast fire sinterization up to 950 °C. This paper presents for the first time the use of a fast fire rate for raw materials and clay formulations and seeks to determine ideal dough and processing conditions for using shorter fire times, thus enabling the use of roller kilns and natural gas in structural ceramic industries