Ostracoda in surface sediments of the Arctic Ocean

Ostracodes were studied from deep Arctic Ocean cores obtained during the Arctic 91 expedition of the Polarstern to the Nansen, Amundsen and Makarov Basins, the Lomonosov Ridge, Morris Jesup Rise and Yermak Plateau, in order to investigate their distribution in Arctic Ocean deep water (AODW) and apply these data to paleoceanographic reconstruction of bottom water masses during the Quaternary. Analyses of coretop assemblages from Arctic 91 boxcores indicate the following: ostracodes are common at all depths between 1000 and 4500 m, and species distribution is strongly influenced by water mass characteristics and bathymetry; quantitative analyses comparing Eurasian and Canada Basin assemblages indicate that distinct assemblages inhabit regions east and west of the Lomonosov Ridge, a barrier especially important to species living in lower AODW; deep Eurasian Basin assemblages are more similar to those living in Greenland Sea deep water (GSDW) than those in Canada Basin deep water; two upper AODW assemblages were recognized throughout the Arctic Ocean, one living between 1000 and 1500 m, and the other, having high species diversity, at 1500-3000 m. Downcore quantitative analyses of species' abundances and the squared chord distance coefficient of similarity reveals a distinct series of abundance peaks in key indicator taxa interpreted to signify the following late Quaternary deep water history of the Eurasian Basin. During the Last Glacial Maximum (LGM), a GSDW/AODW assemblage, characteristic of cold, well oxygenated deep water > 3000 m today, inhabited the Lomonosov Ridge to depths as shallow as 1000 m, perhaps indicating the influence of GSDW at mid-depths in the central Arctic Ocean. During Termination 1, a period of high organic productivity associated with a strong inflowing warm North Atlantic layer occurred. During the mid-Holocene, several key faunal events indicate a period of warming and/or enhanced flow between the Canada and Eurasian Basins. A long-term record of ostracode assemblages from kastenlot core PS2200-5 (1073 m water depth) from the Morris Jesup Rise indicates a quasi-cyclic pattern of water mass changes during the last 300 kyr. Interglacial ostracode assemblages corresponding to oxygen isotope stages 1, 5, and 7 indicate rapid changes in dissolved oxygen and productivity during glacial-interglacial transitions.

Absorption of Asphalt by Aggregate, HR-142, Progress Report, 1970

This report summarizes work accomplished under Project HR-142 during the period from January 1, 1969 to December 31, 1969. Pore characteristics of six limestones were studied in relation to their absorption of two asphalt cements. Porosity and pore size distribution were determined by a mercury penetration porosimeter and asphalt absorption was determined by immersion and bulk-impregnated specific gravity methods. A special study was conducted to develop new, simple and more reproducible methods for bulk specific gravity determination. As a result, a new chemical indicator method was developed to determine the saturated surface-dry condition, and a glass mercury pycnometer was designed to determine coarse·and fine aggregates. Asphalt absorption history of one asphalt mixture on campus has been studied since September 1968. Chemical and/or radiation treatments of absorptive aggregates were conducted on four chemicals and two aggregates.

The Redox Potentials of n-type Colloidal Semiconductor Nanocrystals

Thesis (Ph.D.)--University of Washington, 2016-08

Astaxanthin profiles and corresponding colour properties in Australian farmed black tiger prawn (Penaeus monodon) during frozen storage

The colour of commercial cooked black tiger prawns (Penaeus monodon) is a key quality requirement to ensure product is not rejected in wholesale markets. The colour, due to the carotenoid astaxanthin, can be impacted by frozen storage, but changes in colour or astaxanthin profile, during frozen storage, have not been studied in detail. Subsequently in this study, the aims were to define the astaxanthin (as cis, trans, mono-ester and di-ester forms) content, together with the colour properties, in both pleopods (legs) and abdominal segments. Changes in astaxanthin content and colour properties were further determined during frozen storage (−20°C). Total astaxanthin content was seen to decrease in all samples over time, with the rate of degradation being significantly greater (P < 0.05) in pleopods than abdomen. In both pleopods and abdomen, rate of degradation of esterified forms was significantly greater (P < 0.05) than non-esterified forms. Hue angle (increase), a* value (decrease) and L value (increase) were all seen to significantly change (P < 0.05) during storage, with changes being more prevalent in the pleopods. The pleopods are the key indicator of astaxanthin and colour loss in cooked black tiger prawns and preservation strategies are required to preserve astaxanthin and colour during frozen storage.

Interrelated product design activities sequencing with efficient tabu search algorithms

This paper proposes and investigates a metaheuristic tabu search algorithm (TSA) that generates optimal or near optimal solutions sequences for the feedback length minimization problem (FLMP) associated to a design structure matrix (DSM). The FLMP is a non-linear combinatorial optimization problem, belonging to the NP-hard class, and therefore finding an exact optimal solution is very hard and time consuming, especially on medium and large problem instances. First, we introduce the subject and provide a review of the related literature and problem definitions. Using the tabu search method (TSM) paradigm, this paper presents a new tabu search algorithm that generates optimal or sub-optimal solutions for the feedback length minimization problem, using two different neighborhoods based on swaps of two activities and shifting an activity to a different position. Furthermore, this paper includes numerical results for analyzing the performance of the proposed TSA and for fixing the proper values of its parameters. Then we compare our results on benchmarked problems with those already published in the literature. We conclude that the proposed tabu search algorithm is very promising because it outperforms the existing methods, and because no other tabu search method for the FLMP is reported in the literature. The proposed tabu search algorithm applied to the process layer of the multidimensional design structure matrices proves to be a key optimization method for an optimal product development.

Interrelated product design activities sequencing with efficient tabu search algorithms

This paper proposes and investigates a metaheuristic tabu search algorithm (TSA) that generates optimal or near optimal solutions sequences for the feedback length minimization problem (FLMP) associated to a design structure matrix (DSM). The FLMP is a non-linear combinatorial optimization problem, belonging to the NP-hard class, and therefore finding an exact optimal solution is very hard and time consuming, especially on medium and large problem instances. First, we introduce the subject and provide a review of the related literature and problem definitions. Using the tabu search method (TSM) paradigm, this paper presents a new tabu search algorithm that generates optimal or sub-optimal solutions for the feedback length minimization problem, using two different neighborhoods based on swaps of two activities and shifting an activity to a different position. Furthermore, this paper includes numerical results for analyzing the performance of the proposed TSA and for fixing the proper values of its parameters. Then we compare our results on benchmarked problems with those already published in the literature. We conclude that the proposed tabu search algorithm is very promising because it outperforms the existing methods, and because no other tabu search method for the FLMP is reported in the literature. The proposed tabu search algorithm applied to the process layer of the multidimensional design structure matrices proves to be a key optimization method for an optimal product development.

Sélection d’habitats par les oiseaux de forêt boréale : une analyse écomorphologique

Dans un contexte d’aménagement forestier, la dynamique spatio-temporelle des habitats est susceptible d’isoler les oiseaux nicheurs durant des périodes de plusieurs années, exerçant une pression pour une grande mobilité chez les oiseaux en dispersion. Les grandes distances migratoires de certaines espèces s’ajoutent aux pressions favorisant la mobilité. Par contre, les déplacements dans un feuillage dense peuvent imposer de fortes contraintes aux attributs conférant une grande mobilité aux oiseaux. Du point de vue de la conservation, il serait très utile de prévoir la réponse des différentes espèces d’oiseaux à la fragmentation de leur habitat, à partir de leurs traits écologiques. La morphologie des ailes d’oiseau, notamment la projection des rémiges primaires, est un indicateur clé de mobilité, et pourrait donc servir à de telles prédictions. Malgré les contraintes aérodynamiques, la projection primaire varie considérablement d’une espèce à l’autre. Afin de mieux comprendre les facteurs déterminant cette diversité, j’ai mesuré les ailes de 1017 spécimens vivants de 22 espèces d’oiseaux à la Forêt Montmorency (Québec) en 2013 et 2014. Conformément à mes prédictions, les espèces d’oiseaux dont la projection des primaires était plus longue migrent sur de plus longues distances et vivent dans des habitats ayant un faible indice de densité végétale. Par contre, je n’ai trouvé aucun lien entre la densité moyenne des populations en nidification, un indicateur d’isolement, et la morphologie des ailes. Ces résultats suggèrent que les réponses variées des oiseaux forestiers face à la fragmentation de leurs habitats seraient difficilement prévisibles par la morphologie liée au vol. Mots clés : fragmentation d’habitat, isolement de l’habitat, morphologie des ailes, écomorphologie, distance migratoire, densité de végétation.

Caracterización nutricional mediante antropometría de los niños sanos menores de 5 años asistentes a una institución de salud en Puerto Inírida 2014

Introducción: Siendo la desnutrición infantil, un indicador trazador en el perfil de salud de una población y prioridad establecida por los objetivos de desarrollo del milenio y el plan decenal de salud pública en Colombia - PDSP en su dimensión de seguridad alimentaria y nutricional, mantiene gran prevalencia a nivel nacional a pesar de presentar subregistro en la información reportada, por ende, es prioridad la medición, notificación y tratamiento de la misma. La OMS estandarizó los parámetros de medición y el gobierno nacional los adoptó mediante la resolución 2121 de 2010. Sin embargo, para disminuir el indicador de desnutrición que al año 2015 debería estar reducido en un 50% según el PDSP, es necesario identificar el sub registro que hay en el diagnóstico de la misma. Metodología: Se realizó un estudio poblacional, descriptivo y transversal, en el cual se analizó la base de datos de los niños menores de 5 años asistentes a consulta de crecimiento y desarrollo en una institución de salud del municipio de Puerto Inírida, con el fin de realizar una caracterización nutricional basados en mediciones antropométricas y contrastándolas realizadas por los profesionales de salud con las encontradas utilizando los patrones establecidos por la OMS. La información se analizó con el Software WHO Anthro propiedad de la OMS. Resultados: Se encontró que el 33,6% de los menores de 5 años registrados presentan desnutrición crónica, el 7,6% desnutrición aguda, el 13,2% de desnutrición global y el 13,9% tiene obesidad. Al discriminarlo por edad se encontró mayor prevalencia de desnutrición crónica en ambos sexos, siendo mayor en población de sexo masculino (40,1% masculino – 27,6% femenino); al igual que al realizar la comparación por pertenencia puesto que se encuentra la misma prevalencia en desnutrición crónica (29,1% en población indígena y 29% en población no indígena). Según los estándares de la OMS, en la población estudiada 12 se identificaron 243 casos de malnutrición, mientras que en la consulta de crecimiento y desarrollo fueron diagnosticados como casos de malnutrición por los profesionales de salud solo 99. Discusión: La malnutrición es un problema estructural, por ende, se deben tener en cuenta factores tanto intrínsecos como extrínsecos de la persona. Las medidas antropométricas son sólo una manera de medir, que se debe contextualizar con el entorno y las condiciones socioeconómicas, patológicas y culturales en las que se encuentre la población. El estado nutricional de los menores asistentes a los controles de crecimiento y desarrollo de la población estudiada, se encuentra mal registrado, de la misma manera se encontró una gran prevalencia de desnutrición crónica que es un determinante en la calidad de vida. Es imperante la implementación de políticas públicas adecuadas que permitan profundizar en las causas de este flagelo y así mismo en su tratamiento.

Overgrazing in the Montado? The need for monitoring grazing pressure at paddock scale

Montados are presently facing the threat of either abandonment or intensification, and livestock overgrazing has been suspected of contributing to reduced natural regeneration and biodiversity. However, reliable data are to our knowledge, lacking. To avoid potential risks of overgrazing, an adaptive and efficient management is essential. In the present paper we review the main sources of complexity for grazing management linked with interactions among pasture, livestock and human decisions. We describe the overgrazing risk in montados and favour grazing pressure over stocking rate, as a key indicator for monitoring changes and support management decisions. We suggest the use of presently available imaging and communication technologies for assessing pasture dynamics and livestock spatial location. This simple and effective tools used for monitoring the grazing pressure, could provide an efficient day-to-day aid for farm managers’ operational use and also for rangeland research through data collection and analysis.

Comparison of the Proportion Method With Mycobacteria Growth Indicator Tube and E-test for Susceptibility Testing of Mycobacterium tuberculosis

The aim of this study was to investigate the correlation between proportion method with mycobacteria growth indicator tube (MGIT) and E-test for Mycobacterium tuberculosis. Forty clinical isolates were tested. MGIT and E-test with the first line antituberculous drugs correlated with the proportion method. Our results suggested that MGIT and E-test methods can be routinely used instead of the proportion method.

Merging the hypothetical extraction method and the classical multiplier approach: a hybrid possibility for identifying key distributive sectors

The two main alternative methods used to identify key sectors within the input-output approach, the Classical Multiplier method (CMM) and the Hypothetical Extraction method (HEM), are formally and empirically compared in this paper. Our findings indicate that the main distinction between the two approaches stems from the role of the internal effects. These internal effects are quantified under the CMM while under the HEM only external impacts are considered. In our comparison, we find, however that CMM backward measures are more influenced by within-block effects than the proposed forward indices under this approach. The conclusions of this comparison allow us to develop a hybrid proposal that combines these two existing approaches. This hybrid model has the advantage of making it possible to distinguish and disaggregate external effects from those that a purely internal. This proposal has also an additional interest in terms of policy implications. Indeed, the hybrid approach may provide useful information for the design of ''second best'' stimulus policies that aim at a more balanced perspective between overall economy-wide impacts and their sectoral distribution.

A novel indicator reaction for the catalytic determination of V(V) at ppb levels by the kinetic spectrophotometric method

A novel sensitive and relatively selective kinetic method is presented for the determination of V(V), based on its catalytic effect on the oxidation reaction of Ponceau Xylydine by potassium bromate in presence of 5-sulfosalicylic acid (SSA) as activator. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of Ponceau Xylydine at 640 nm between 0.5 to 7 min (the fixed time method) in H3PO4 medium at 25ºC. The effect of various parameters such as concentrations of H3PO4, SSA, bromate and Ponceau Xylydine, temperature and ionic strength on the rate of net reaction were studied. The method is free from most interferences, especially from large amounts of V(IV). The decrease in absorbance is proportional to the concentration of V(V) over the entire concentration range tested (1-15 ng mL−1) with a detection limit of 0.46 ng mL-1 (according to statistical 3Sblank/k criterion) and a coefficient of variation (CV) of 1.8% (for ten replicate measurement at 95% confidence level). The proposed method suffers few interferences such as Cr(VI) and Hg(II) ions. The method was successfully applied to the determination of V(V) in tap water, drinking water, bottled mineral water samples and a certified standard reference material such as SRM-1640 with satisfactory results. The vanadium contents of water samples were also determined by FAAS for a comparison. The recovery of spiked vanadium(V) was found to be quantitative and the reproducibility was satisfactory. It was observed that the results of the SRM 1640 were in good agreement with the certified value.

Applying customer value measurement to a customer loyalty program: Case of implementing a key performance indicator based on customer value

In recent decade customer loyalty programs have become very popular and almost every retail chain seems to have one. Through the loyalty programs companies are able to collect information about the customer behavior and to use this information in business and marketing management to guide decision making and resource allocation. The benefits for the loyalty program member are often monetary, which has an effect on the profitability of the loyalty program. Not all the loyalty program members are equally profitable, as some purchase products for the recommended retail price and some buy only discounted products. If the company spends similar amount of resources to all members, it can be seen that the customer margin is lower on the customer who bought only discounted products. It is vital for a company to measure the profitability of their members in order to be able to calculate the customer value. To calculate the customer value several different customer value metrics can be used. During the recent years especially customer lifetime value has received a lot of attention and it is seen to be superior against other customer value metrics. In this master’s thesis the customer lifetime value is implemented on the case company’s customer loyalty program. The data was collected from the customer loyalty program’s database and represents year 2012 on the Finnish market. The data was not complete to fully take advantage of customer lifetime value and as a conclusion it can be stated that a new key performance indicator of customer margin should be acquired in order to profitably drive the business of the customer loyalty program. Through the customer margin the company would be able to compute the customer lifetime value on regular basis enabling efficient resource allocation in marketing.

Genetic algorithm based indicator sequence method for exon prediction

Considerable research effort has been devoted in predicting the exon regions of genes. The binary indicator (BI), Electron ion interaction pseudo potential (EIIP), Filter method are some of the methods. All these methods make use of the period three behavior of the exon region. Even though the method suggested in this paper is similar to above mentioned methods , it introduces a set of sequences for mapping the nucleotides selected by applying genetic algorithm and found to be more promising

A method of weighting indicators in building energy efficiency assessment

This paper identifies the indicators of energy efficiency assessment in residential building in China through a wide literature review. Indicators are derived from three main sources: 1) The existing building assessment methods; 2)The existing Chinese standards and technology codes in building energy efficiency; 3)Academia research. As a result, we proposed an indicator list by refining the indicators in the above sources. Identified indicators are weighted by the group analytic hierarchy process (AHP) method. Group AHP method is implemented following key steps: Step 1: Experienced experts are selected to form a group; Step 2: A survey is implemented to collect the individual judgments on the importance of indicators in the group; Step 3: Members’ judgments are synthesized to the group judgments; Step 4: Indicators are weighted by AHP on the group judgments; Step 5: Investigation of consistency estimation shows that the consistency of the judgment matrix is accepted. We believe that the weighted indicators in this paper will provide important references to building energy efficiency assessment.