Sustaining culture through architecture : how can local, vernacular architectural principles be adapted to contemporary design in a village in Guyana

This thesis explores how architecture can adapt local vernacular design principles to contemporary building design in a rural setting. Vernacular buildings in Guyana present a unique and coherent set of design principles developed in response to climatic and cultural conditions. The concept of “habitus” proposed by philosopher Pierre Bourdieu describing the evolving nature of social culture was used to interpret Guyanese local buildings. These principles were then applied to the design of a Women’s Center in the village of Port Mourant on the east coast of Guyana. The design specifically interpreted the “bottom-house” of local Guyanese architecture, an inherently flexible transitional outdoor space beneath raised buildings. The design of the Women’s Center demonstrates how contemporary architectural design can respond to climatic requirements, local preferences and societal needs to support the local culture.

Architectural-Physical Co-Design of 3D CPUs with Micro-Fluidic Cooling

The performance, energy efficiency and cost improvements due to traditional technology scaling have begun to slow down and present diminishing returns. Underlying reasons for this trend include fundamental physical limits of transistor scaling, the growing significance of quantum effects as transistors shrink, and a growing mismatch between transistors and interconnects regarding size, speed and power. Continued Moore's Law scaling will not come from technology scaling alone, and must involve improvements to design tools and development of new disruptive technologies such as 3D integration. 3D integration presents potential improvements to interconnect power and delay by translating the routing problem into a third dimension, and facilitates transistor density scaling independent of technology node. Furthermore, 3D IC technology opens up a new architectural design space of heterogeneously-integrated high-bandwidth CPUs. Vertical integration promises to provide the CPU architectures of the future by integrating high performance processors with on-chip high-bandwidth memory systems and highly connected network-on-chip structures. Such techniques can overcome the well-known CPU performance bottlenecks referred to as memory and communication wall. However the promising improvements to performance and energy efficiency offered by 3D CPUs does not come without cost, both in the financial investments to develop the technology, and the increased complexity of design. Two main limitations to 3D IC technology have been heat removal and TSV reliability. Transistor stacking creates increases in power density, current density and thermal resistance in air cooled packages. Furthermore the technology introduces vertical through silicon vias (TSVs) that create new points of failure in the chip and require development of new BEOL technologies. Although these issues can be controlled to some extent using thermal-reliability aware physical and architectural 3D design techniques, high performance embedded cooling schemes, such as micro-fluidic (MF) cooling, are fundamentally necessary to unlock the true potential of 3D ICs. A new paradigm is being put forth which integrates the computational, electrical, physical, thermal and reliability views of a system. The unification of these diverse aspects of integrated circuits is called Co-Design. Independent design and optimization of each aspect leads to sub-optimal designs due to a lack of understanding of cross-domain interactions and their impacts on the feasibility region of the architectural design space. Co-Design enables optimization across layers with a multi-domain view and thus unlocks new high-performance and energy efficient configurations. Although the co-design paradigm is becoming increasingly necessary in all fields of IC design, it is even more critical in 3D ICs where, as we show, the inter-layer coupling and higher degree of connectivity between components exacerbates the interdependence between architectural parameters, physical design parameters and the multitude of metrics of interest to the designer (i.e. power, performance, temperature and reliability). In this dissertation we present a framework for multi-domain co-simulation and co-optimization of 3D CPU architectures with both air and MF cooling solutions. Finally we propose an approach for design space exploration and modeling within the new Co-Design paradigm, and discuss the possible avenues for improvement of this work in the future.

Design, Science and Conceptual Analysis

Philosophers expend considerable effort on the analysis of concepts, but the value of such work is not widely appreciated. This paper principally analyses some arguments, beliefs, and presuppositions about the nature of design and the relations between design and science common in the literature to illustrate this point, and to contribute to the foundations of design theory.

Contribution towards a reflection about methodological strategies in design education and the function of drawing in design

This work presents a reflection on Design education and specifically on the role of Drawing in this area. As a subject, Design has expanded its field of action expanding into new areas such as Experience Design or Service Design. It became necessary for the designer to have more than an education based on technological knowledge or know-how. Many authors like Meredith Davis, Don Norman or Jamie Hobson point out the urgency to review the curricula of Design courses because nowadays “… design is more than appearance, design is about interaction, about strategy and about services. Designers change social behavior” (Norman 2011). When shifting from a product-centered design to a person-centered design (in a structure, a service or in a relationship) what should the function of drawing in a design course be? What should its curriculum be? Our work methodology will be to confront today’s perspectives on design theory and practice in an attempt to add to the discussion on the methodological strategies in design teaching in the contemporary context.

Contribution towards a reflection about methodological strategies in Design Education and the function of Drawing in Design

This work presents a reflection on Design education and specifically on the role of Drawing in this area. As a subject, Design has expanded its field of action expanding into new areas such as Experience Design or Service Design. It became necessary for the designer to have more than an education based on technological knowledge or know-how. Many authors like Meredith Davis, Don Norman or Jamie Hobson point out the urgency to review the curricula of Design courses because nowadays “ … design is more than appearance, design is about interaction, about strategy and about services. Designers change social behavior” (Norman, 2011) When shifting from a product-centered design to a person-centered design (in a structure, a service or in a relationship) what should the function of drawing in a design course be? What should its curriculum be? Our work methodology will be to confront today’s perspectives on design theory and practice in an attempt to add to the discussion on the methodological strategies in design teaching in the contemporary context.

Teaching drawing: an interdisciplinary pedagogical experience in a graphic design course

Various authors have written about the importance of drawing in design methodology. Their general conclusion points drawing as an essential tool for design research, as it allows investigation of several alternative solutions in design process (Cross, 2007). The recent profound changes in design nature (Norman, 2011), justify a discussion on the purpose of drawing in design courses. As a consequence of this new reality, the educational institutions face the challenge of the definition of their curricular structures and teaching methodologies. Among others, concepts such as collaboration and multidisciplinary design approaches have been discussed as strategies for design education (Heller and Talarico, 2011, pp. 82-85). In this context, and using our teaching activity experience in Drawing and Design areas, the authors discuss:  how can drawing methods be included in the current design teaching?  can drawing be considered as an interdisciplinary approach?  what contributions can these methodologies provide to the educational/learning process? Based on these concerns, we developed an interdisciplinary project in the Graphic Design Course with two curricular units: Drawing 1 and Aesthetic and Design Theory 1. In this article the authors present the aims and process developed, and discuss the outcomes of this pedagogical experience.

Classical design thinking to organization design in the tourism sector

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

A systematic methodology to analyse the performance and design configurations of business interoperability in cooperative industrial networks

This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate.

Smart interior design of buildings and its relationship to land use

Architectural design is often associated with aesthetics and style, but it is also very important to building performance and sustainability. There are some studies associating architectural design to the choice for materials from sustainable sources, to indoor air quality, to energy efficiency and productivity. This article takes a step further to analyse how the use of efficient interior design techniques can impact the habitable space in order to improve building sustainability in land use. Smart interior design, a current trend related to the use of efficient and flexible furniture and movable walls in tiny or compact apartments, is analysed. A building with a standard design is used as a case study reference building and compared to a proposed theoretical design alternative using smart interior design techniques. In order to correctly assess sustainability performance, a quantifiable and verified method is used. Results showed that the use of smart interior design techniques can greatly reduce buildingsâ impact on the environment.

A design for an advanced architecture of satellite ground segments

This project proposes a preliminary architectural design for a control and data processing center, also known as 'ground segment', for Earth observation satellites.

IDEAS for Strategic Technology Management: Design of an electronically mediated scenario method

The age-old adage goes that nothing in this world lasts but change, and this generation has indeed seen changes that are unprecedented. Business managers do not have the luxury of going with the flow: they have to plan ahead, to think strategies that will meet the changing conditions, however stormy the weather seems to be. This demand raises the question of whether there is something a manager or planner can do to circumvent the eye of the storm in the future? Intuitively, one can either run on the risk of something happening without preparing, or one can try to prepare oneself. Preparing by planning for each eventuality and contingency would be impractical and prohibitively expensive, so one needs to develop foreknowledge, or foresight past the horizon of the present and the immediate future. The research mission in this study is to support strategic technology management by designing an effective and efficient scenario method to induce foresight to practicing managers. The design science framework guides this study in developing and evaluating the IDEAS method. The IDEAS method is an electronically mediated scenario method that is specifically designed to be an effective and accessible. The design is based on the state-of-the-art in scenario planning, and the product is a technology-based artifact to solve the foresight problem. This study demonstrates the utility, quality and efficacy of the artifact through a multi-method empirical evaluation study, first by experimental testing and secondly through two case studies. The construction of the artifact is rigorously documented as justification knowledge as well as the principles of form and function on the general level, and later through the description and evaluation of instantiations. This design contributes both to practice and foundation of the design. The IDEAS method contributes to the state-of-the-art in scenario planning by offering a light-weight and intuitive scenario method for resource constrained applications. Additionally, the study contributes to the foundations and methods of design by forging a clear design science framework which is followed rigorously. To summarize, the IDEAS method is offered for strategic technology management, with a confident belief that it will enable gaining foresight and aid the users to choose trajectories past the gales of creative destruction and off to a brighter future.

À la recherche d'un cadre théorique pour la pratique du design graphique

Les schémas en annexe ont été réalisés avec le logiciel Adobe Illustrator.

Assistance de l’enseignement de la conception architecturale par la modélisation de savoir-faire des référents

Dans une époque de changements des moyens de représentation et communication en architecture, cette recherche porte sur l’enseignement de la conception architecturale et plus spécifiquement sur l’apport que l’informatique pourrait avoir dans ce processus. En nous basant sur une méthodologie qualitative, exploratoire et participative, nous y procédons par enchainement de questions, celle de départ étant la suivante: Comment l’enseignement de la conception architecturale pourrait tirer avantage des moyens numériques? Notre objectif est de proposer des méthodes et des outils d’apprentissage aux étudiants en architecture pour enrichir leurs démarches de conception grâce à l’ordinateur. Après une revue de la littérature dans le domaine, et un approfondissement de l’étude sur le rôle des référents architecturaux et sur la conception intégrée, nous avons procédé à une observation exploratoire du travail des étudiants en atelier d’architecture. Ces premières étapes de la recherche ont permis de dégager des discordances entre les positions théoriques et la pratique en l’atelier, pour concrétiser ultérieurement la question de recherche. Dans le but de discerner des méthodes efficaces et innovatrices pour répondre aux discordances identifiées, nous avons engagé une étude de la littérature sur les théories cognitives par rapport aux connaissances, l’apprentissage et la conception. Certaines stratégies ont pu être définies, notamment la nécessité de représentation multimodale des référents architecturaux, l’importance de représenter le processus et non seulement le résultat, ainsi que l’avantage d’inciter les étudiants à travailler dans leur ‘zone proximale’ de développement. Suite à ces recherches, une méthode d’enseignement complémentaire a été définie. Elle propose aux étudiants des explorations de l’objet en conception basées sur la manipulation des savoir-faire architecturaux. Cette méthode a été opérationnalisée d’un point de vue pédagogique ainsi que didactique et mise à l’épreuve auprès des étudiants en atelier. Un prototype de librairie de référents architecturaux interactifs (LibReArchI) a été créé dans ce but. Elle a été conçue en tant qu’environnement de conception et espace de partage de savoir-faire entre étudiants et enseignants. Les principaux résultats de cette recherche démontrent le rôle positif de la méthode proposée pour le transfert des savoir-faire architecturaux lors de l’apprentissage en atelier. Son potentiel d’assister la conception intégrée et de stimuler l’émergence d’idées a été constaté. Au niveau théorique, un modèle d’un cycle du processus de design avec le numérique a été esquissé. En conclusion, des avenues de développements futurs de cette recherche sont proposées.

Tensions tectoniques du projet d'architecture : études comparatives de concours canadiens et brésiliens (1967-2005)

Cette thèse entend contribuer à la compréhension du processus de conception architecturale par le biais du concept de tectonique, notion dont l’historicité confirme une certaine diversité de significations, mais qui suscite une réflexion fondamentale sur le rapport entre l’esthétique architecturale et les moyens constructifs. La connaissance technique de la construction, constituée principalement au 18ème siècle, permettra une nouvelle réflexion sur le rapport entre l’esthétique architecturale et les moyens constructifs. Au 19ème siècle, moment de l’apparition du concept de « tectonique » dans le contexte du débat sur la notion de style, l’indéniable contribution de l’architecte et théoricien Gottfried Semper reconnaît la complexité matérielle de l’édifice. La reprise du terme au 20ème siècle par l’historien et théoricien Kenneth Frampton va quant à elle déplacer le sens de la tectonique vers l’idée d’un « potentiel d’expression constructive ». Ces deux auteurs représentent deux grandes approches tectoniques convergeant sur la nécessité, pour toute théorie de l’architecture, d’encourager une réflexion critique de la construction. Cette thèse se développe en deux parties, l’une retraçant l’histoire et les enjeux de la tectonique, l’autre, de nature plus concrète, cherchant à tester l’actualité du concept à travers une série d’analyses tectoniques de projets modernes et contemporains. À la croisée de deux contextes géographiques différents, le Canada et le Brésil, le corpus de projets de concours que nous avons constitué considère la tectonique comme un phénomène transculturel. Nous formulons l’hypothèse d’une « tectonique du projet », c’est-à-dire d’un espace théorique dans lequel les questions relatives au bâtiment s’élaborent dans des « tensions » dialectiques. L’actualité des catégories semperiennes, dans lesquelles les différents « éléments » du bâtiment représentent différentes techniques de construction, est revisitée à partir de l’étude des projets de Patkau Architects (1986) et de MMBB Arquitetos (1990). Une tension entre les expressions symbolique et formelle issues du matériau brut est plus explicite dans l’étude des projets de Ramoisy Tremblay architectes (2002) et de Brasil Arquitetura (2005). La théorie de la transformation de matériau (Stoffwechseltheorie) de Semper est réexaminée parallèlement dans les projets d’Arthur Erickson et Geoffrey Massey (1967) et de Paulo Mendes da Rocha (1969). Dans l’ensemble de tensions tectoniques présentes tout au long de la conception, nous avons retenu plus particulièrement : le contact avec le sol, la recherche d’une homogénéité constructive, ou son opposé, la recherche d’une variété matérielle et, finalement la tension entre la dimension représentationnelle et la dimension technique de l’architecture. La modélisation du concept de tectonique, par un ensemble de tensions auxquelles les concepteurs doivent s’adresser en phase de projet, confirme que des questions en apparence simplement « techniques » concernent en fait tout autant le génie de l’invention que la connaissance historique des idées architecturales.

Le rôle de la rhétorique dans le projet en design : une exploration du concept d’argumentation de Perelman et Olbrechts-Tyteca

Les projets interdisciplinaires constituent rarement le terrain des études 
sur le processus de conception en design. Les théories générales du design, en tentant de définir ce qui est commun à toutes les disciplines du design, ont davantage étudié les cas typiques que les cas atypiques. Or, nous croyons qu’il existe dans les projets interdisciplinaires une négociation argumentative et une ouverture vers l’autre, propice à l’analyse du processus de conception en design. Pour réaliser l’étude de ce processus, la stratégie empruntée a été la «recherche-projet» qui propose une participation active sur le terrain. 
À l’intérieur de cette stratégie méthodologique, nous avons réalisé l’étude de cas d’un projet hybride, une signalétique identitaire destinée à marquer les écocentres montréalais et orienter leurs usagers. Comme plusieurs autres pratiques du design, la complexité des projets interdisciplinaires demande l’apport de plusieurs acteurs dans le processus. 
Ces personnes conçoivent le projet à travers des représentations visuelles et des échanges verbaux, nous avons choisi de faire porter notre étude principalement sur le second. Pour ce faire, nous avons choisi comme cadre théorique le Traité de l’argumentation de Chaïm Perelman et Lucie Olbrechts-Tyteca en nous intéressant plus spécifiquement aux concepts d’«accord» et d’«auditoire». Parce que le véhicule de l’action en design est la notion de «projet», l’Anthropologie du projet de Jean-Pierre Boutinet sera notre guide à travers cette conduite. L’objet de recherche de ce mémoire sera donc le processus de conception en design qui sera étudié à travers le regard de l’argumentation. L’argumentation s'est révélée la clé du problème que posent les jugements de valeur, commune à toutes les disciplines du design. Qu’est-ce qu’un «bon» projet réalisé? Est-il possible de répondre à cette question, sans tomber dans un cadre argumentatif, sans devoir révéler les arguments qui nous permettent de croire vraisemblable une telle proposition? C’est en mettant en lien la théorie du projet en design et la théorie de l’argumentation que nous avons éclairé la pratique du designer, sa relation à ses collègues et ultimement avec lui-même. L’argumentation s’est avérée un outil permettant la construction de la réalité dans le projet interdisciplinaire.