Supply Chain Management in Confined Site Construction: Strategies to Reduce Delay in the Delivery of Materials to Site

With the increase in construction in dense urban environments, the delays associated with managing the material supply chain to site is called into question. Purpose: The aim of this investigation is to gain the perspective of construction contractors operating in a dense urban environment and the resulting strategies adopted to reduce delays in the delivery of materials to site. Methodology: This is achieved through incorporating a comprehensive literature review on the subject in conjunction with industry interviews with construction professionals in the identification of various management issues and corresponding strategies in the reduction of delays in the delivery of materials to site. Findings: The key issue which emerges is the lack of space for unloading bays while the corresponding key strategy is to schedule deliveries outside peak congestion times. Practical Implication: With confined site construction evident throughout the industry and the noted importance of an effective supply chain, the findings here in further assist on-site management in the daily task of ensuring the effective delivery and off-loading of materials in a complex and hazardous environment. Originality/Value: This research aids on-site management of confined site environments in the coordination of the material supply chain to site.

Systolic two-port adaptor for high performance wave digital filtering

The authors present a VLSI circuit for implementing wave digital filter (WDF) two-port adaptors. Considerable speedups over conventional designs have been obtained using fine grained pipelining. This has been achieved through the use of most significant bit (MSB) first carry-save arithmetic, which allows systems to be designed in which latency L is small and independent of either coefficient or input data wordlength. L is determined by the online delay associated with the computation required at each node in the circuit (in this case a multiply/add plus two separate additions). This in turn means that pipelining can be used to considerably enhance the sampling rate of a recursive digital filter. The level of pipelining which will offer enhancement is determined by L and is fine-grained rather than bit level. In the case of the circuit considered, L = 3. For this reason pipeline delays (half latches) have been introduced between every two rows of cells to produce a system with a once every cycle sample rate.

Development of a platform for lean manufacturing simulation games

More than ever, the economic globalization is creating the need to increase business competitiveness. Lean manufacturing is a management philosophy oriented to the elimination of activities that do not create any type of value and are thus considered a waste. One of the main differences from other management philosophies is the shop-floor focus and the operators' involvement. Therefore, the training of all organization levels is crucial for the success of lean manufacturing. Universities should also participate actively in this process by developing students' lean management skills and promoting a better and faster integration of students into their future organizations. This paper proposes a single realistic manufacturing platform, involving production and assembly operations, to learn by playing many of the lean tools such as VSM, 5S, SMED, poke-yoke, line balance, TPM, Mizusumashi, plant layout, and JIT/kanban. This simulation game was built in tight cooperation with experienced lean companies under the international program “Lean Learning Academy,”http://www.leanlearningacademy.eu/ and its main aim is to make bachelor and master courses in applied sciences more attractive by integrating classic lectures with a simulated production environment that could result in more motivated students and higher study yields. The simulation game results show that our approach is efficient in providing a realistic platform for the effective learning of lean principles, tools, and mindset, which can be easily included in course classes of less than two hours.

Compilation efficace pour FPGA reconfigurable dynamiquement

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

A layered JavaScript virtual machine supporting dynamic instrumentation

L’observation de l’exécution d’applications JavaScript est habituellement réalisée en instrumentant une machine virtuelle (MV) industrielle ou en effectuant une traduction source-à-source ad hoc et complexe. Ce mémoire présente une alternative basée sur la superposition de machines virtuelles. Notre approche consiste à faire une traduction source-à-source d’un programme pendant son exécution pour exposer ses opérations de bas niveau au travers d’un modèle objet flexible. Ces opérations de bas niveau peuvent ensuite être redéfinies pendant l’exécution pour pouvoir en faire l’observation. Pour limiter la pénalité en performance introduite, notre approche exploite les opérations rapides originales de la MV sous-jacente, lorsque cela est possible, et applique les techniques de compilation à-la-volée dans la MV superposée. Notre implémentation, Photon, est en moyenne 19% plus rapide qu’un interprète moderne, et entre 19× et 56× plus lente en moyenne que les compilateurs à-la-volée utilisés dans les navigateurs web populaires. Ce mémoire montre donc que la superposition de machines virtuelles est une technique alternative compétitive à la modification d’un interprète moderne pour JavaScript lorsqu’appliqué à l’observation à l’exécution des opérations sur les objets et des appels de fonction.

Análisis económico de las vacunas 10-valente y 13-valente contra neumococo: revisión sistemática

Introducción: Las vacunas clásicamente han representado un método económico y eficaz para el control y prevención de múltiples enfermedades infecciosas. En los últimos años se han introducido nuevas vacunas contra neumococo a precios elevados, y los diferentes análisis económicos a nivel mundial de estas vacunas no muestran tendencias. El objetivo de este trabajo era resumir la evidencia existente a través de los diferentes estudios económicos evaluando las dos vacunas de segunda generación contra neumococo en la población a riesgo. Metodología: En este trabajo se realizo una revisión sistemática de la literatura en 8 bases de datos localizadas en diferentes partes del mundo y también que tuvieran literatura gris. Los artículos fueron inicialmente evaluados acorde a su titulo y resumen, posteriormente los elegidos se analizaron en su totalidad. Resultados: Se encontraron 404 artículos, de los cuales 20 fueron incluidos en el análisis final. Se encontró que la mayoría de los estudios se realizaron en áreas donde la enfermedad tiene una carga baja, como es Norte América y Europa, mientras que en los lugares del mundo donde la carga es mas alta, se realizaron pocos estudios. De igual manera se observo que la mayoría de los estudios mostraron por los menos ser costo efectivos respecto a la no vacunación, y en su totalidad las dos vacunas de segunda generación mostraron costo efectividad respecto a la vacunación con PCV-7. Los resultados de los estudios son muy heterogéneos, hasta dentro del mismo país, señalando la necesidad de guías para la conducción de este tipo de estudios. De igual manera, la mayoría de los estudios fueron financiados por farmacéuticas, mientras en un numero muy reducido por entes gubernamentales. Conclusiones: La mayoría de los estudios económicos sobre las vacunas de segunda generación contra neumococo han sido realizados en países con un alto índice de desarrollo económico y patrocinados por farmacéuticas. Dado que la mayoría de la carga de la enfermedad se encuentran en regiones con un menor nivel de desarrollo económico se deberían realizar mas en estas zonas. De igual manera, al ser la vacunación un asunto de salud publica y con un importante impacto económico los gobiernos deberían estar mas involucrados en los mismos.

Gestión de la cadena de suministros desde la dinámica de sistemas. Aproximación al mejoramiento de la toma de decisiones

El objetivo de este trabajo es hacer un estudio sobre la cadena de suministros en organizaciones empresariales desde la Dinámica de Sistemas y como esta puede aportar al desempeño y el control de las cadenas de suministros. Se buscará Abordar el cocimiento sobre tres perspectivas de Supply Chain y su relación con la dinámica de sistemas. También se buscará identificar los tipos de integración en las actividades de la gestión en la cadena de suministros y sus horizontes de planeación. Por último, se pretende analizar las aplicaciones de Supply Chain Management que se han basado en el uso de la metodología de dinámica de sistemas. Para esto, la investigación empezará por definir la problemática alrededor de unir estas dos áreas y definirá el marco teórico que fundan estas dos disciplinas. Luego se abordará la metodología usada por la Dinámica de Sistemas y los diferentes aspectos de la cadena de suministros. Se Ahondará en el acercamiento de las dos disciplinas y como convergen ayudando la SD a la SCM (Supply Chain Management). En este punto también se describirán los trabajos en los diferentes enfoques que se han hecho a partir de uso de la dinámica de sistemas. Por último, presentaremos las correspondientes conclusiones y comentarios acerca de este campo de investigación y su pertinencia en el campo de la Supply Chain. Esta investigación abarca dos grandes corrientes de pensamiento, una sistémica, a través de la metodología de dinámica de sistemas y la otra, lógico analítica la cual es usada en Supply Chain. Se realizó una revisión de la literatura sobre las aplicaciones de dinámica de sistemas (SD) en el área de Supply Chain, sus puntos en común y se documentaron importantes empleos de esta metodología que se han hecho en la gestión de la cadena de suministros.

Estructuración de un modelo de gestión eficiente para AJ Colombia SAS

En la mayoría de los países, los negocios familiares representan un alto porcentaje de todas las empresas constituidas. Colombia no es la excepción a este comportamiento, donde las empresas familiares representan el 70% de todas las compañías, según la Superintendencia de Sociedades, en las que se incluyen PYMES y grandes grupos económicos. Este trabajo de grado tiene como objetivo estructurar un modelo de gestión eficiente para la empresa AJ Colombia S.A.S. una empresa mediana que se ha venido estructurando de manera empírica, por lo que tras el análisis de sus procesos encontramos posibles mejoras usando herramientas como el Cambio Estratégico y la Reingeniería, además de la generación de valor por medio de los Inventarios.

The role of Investment Management Systems in regulatory compliance: a Post-Financial Crisis study of displacement mechanisms

The financial crisis of 2007–2009 and the resultant pressures exerted on policymakers to prevent future crises have precipitated coordinated regulatory responses globally. A key focus of the new wave of regulation is to ensure the removal of practices now deemed problematic with new controls for conducting transactions and maintaining holdings. There is increasing pressure on organizations to retire manual processes and adopt core systems, such as Investment Management Systems (IMS). These systems facilitate trading and ensure transactions are compliant by transcribing regulatory requirements into automated rules and applying them to trades. The motivation of this study is to explore the extent to which such systems may enable the alteration of previously embedded practices. We researched implementations of an IMS at eight global financial organizations and found that overall the IMS encourages responsible trading through surveillance, monitoring and the automation of regulatory rules and that such systems are likely to become further embedded within financial organizations. We found evidence that some older practices persisted. Our study suggests that the institutionalization of technology-induced compliant behaviour is still uncertain.

The IT outsourcing market-place: vendors and their selection

This paper focuses on outsourcing vendors, their characteristics and the vendor selection process. It draws on current research and two research studies, one specifi- cally examining outsourcing vendors and the other examining vendor-client issues. We first outline the development of the market for the outsourcing of information technology/information systems services and activities, then detail the characteristics of different types of vendor companies and their competitive positions, before providing a client perspective to the issue of vendor selection.

A preliminary study on building demolition engineering and management

In recent years, building demolition has been challenging urban developers due to the increased incidence of demolition projects and the elevation of demolition requirements. The importance of building demolition is also recognised by researchers and, given its environmental impacts, it is anticipated to achieve the same attention as conventional planning, design,
construction and maintenance in the near future. In this article, the authors aim to develop a series of strategies for promoting building demolition practice. Environmentally-friendly demolition procedures are introduced through a waste minimisation decision that makes the approach on alternatives to demolition and an integrated demolition planning and design approach focus on a just-in-time (JIT) philosophy. A conceptual management framework is also presented for the implementation of demolition projects.

Value analysis of just-in-time demolition approach

The recent deconstruction approach for demolition projects promotes reusing and recycling materials. However, the demolition project is interrupted and slowed down while the project team wait for the waste exchange process. Wasted materials generated from the demolition project have to be stored on demolition site or extra depository. Cost and time might be lost for the inventory of wasted materials and products. Just-in-Time (JIT) is a matured method widely used in manufacture industry as well as construction industry. It is utilised to reduce the inventory of both raw materials and final products. It is also used to shorten production cycle and improve the quality of the products. The JIT philosophy can be applied into demolition project so that the inventory of wasted materials can be eliminated and the project time can be shortened. To implement JIT demolition, the waste exchange process can be performed before the wasted materials are generated from the project. Material owners and demanders can virtually plan for waste handling before the demolition project is physically implemented. As a result, waste materials can be sent to demanders through transportation right after they are produced from the project. Applying JIT philosophy in demolition projects can effectively reduce the inventory of wasted materials and the amount of demolition waste to be sent to landfills. Therefore the cost and time of the project are reduced, and the quality of final delivered materials is improved.

Web enabled just-in-time salvaged material management for demolition projects

The demolition activities of buildings produce numerous environmental pressures as a large proportion of demolition waste materials are sent to landfill directly in many projects. Web-based waste exchange systems could provide right solutions for releasing these pressures. Because the approaches adopted in current waste exchange systems are inefficient, these systems cannot generate waste exchange, not achieving their final goal, environmental protection. The Just-in-time (JIT) philosophy has been applied in the manufacture industry for decades and it is proven to be effective to eliminate or minimise inventory during production. This research aims to adopt the JIT philosophy into a demolition project management informapon system so that the system is more efficient in handling waste exchange. The system structure, key components and Just-in-time adoption are proposed and identified. Finally, a proto typed system is demonstrated.

Bringing Japanese manufacturing systems to America: the feasibility of implementing just-in-time production in the United States

This paper addresses the feasibility of implementing Japanese manufacturing systems in the United States. The recent success of Japanese transplant companies suggests that Just-In-Time (JIT) production is possible within America's industrial environment. Once American workers receive proper training, they have little difficulty participating in rapid setup procedures and utilizing the kanban system. Japanese transplants are gradually developing Japanese-style relationships with their American supplier companies by initiating long-term, mutually beneficial agreements. They are also finding ways to cope with America's problem of distance, which is steadily decreasing as an obstacle to JIT delivery. American companies, however, encounter Significant problems in trying to convert traditionally organized, factories to the JIT system. This paper demonstrates that it is both feasible and beneficial for American manufacturers to implement JIT production techniques. Many of the difficulties manufacturers experience center around a general lack of information about JIT. Once a company realizes its potential for setup-time reduction, a prerequisite for the JIT system, workers and managers can work together to create a new process for handling equipment changeover. Significant results are possible with minimal investment. Also, supervisors often do not realize that the JIT method of ordering goods from suppliers is compatible with current systems. This "kanban system" not only enhances current systems but also reduces the amount of paperwork and scheduling involved. When arranging JlT delivery of supplier goods, American manufacturers tend to overlook important aspects of JIT supplier management. However, by making long-tenn commitments, initiating the open exchange of information, assisting suppliers in reaching new standards of performance, increasing the level of conununication, and relying more on suppliers' engineering capabilities, even American manufacturers can develop Japanese-style supplier relationships that enhance the effectiveness of the system.

Application of hermeneutics to studying an experience mining process

In this paper we investigate an approach to eliciting practitioners’ problem-solving experience across an application domain. The approach is based on a well-known ‘pattern mining’ process which commonly results in a collection of sharable and reusable ‘design patterns’. While pattern mining has been recognised to work effectively in numerous domains, its main problem is the degree of technical proficiency that few domain practitioners are prepared to master. In our approach to pattern mining, patterns are induced indirectly from designers’ experience, as determined by analysing their past projects, the problems encountered and solutions applied in problem rectification. Through the cycles of hermeneutic revisions, the pattern mining process has been refined and ultimately its deficiencies addressed. The hermeneutic method used in the study has been clearly shown in the paper and illustrated with examples drawn from the multimedia domain. The resulting approach to experience elicitation provided opportunities for active participation of multimedia practitioners in capturing and sharing their design experience.