41 resultados para Isótopo
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
This research examines the merits of hallucinogenic plants considered and/or psychoactive substances, such as Cannabis sativa and Ipomoea violacea, using the isotope rates of stable isotope of oxygen (18O) and nitrogen (15N), continuing projects already developed by the research group at the Center for Stable Isotope (CIE), which evaluated the isotopes carbon-13. This paper helps in creating a database that we intent to use in evaluation of each plant merit. Through the IRMS (Isotope-Ratio Mass Spectrometry) technique, it has shown that some of the 24 samples of marijuana (Cannabis sativa L.) evaluated were similar to those grown in the regions of Fairbanks and Tanacross Alaska, USA. In turn, the 50 samples of Ipomoea violacea, coming from Botucatu (SP) and Três Lagoas (MS), got their differences detected, in order to clearly identify the discrepancies between their growing regions. Thus, it was possible not only to track the geographical differences between marijuana samples collected from different regions, but also evaluate the isotopic variation of leaf, flower and seed of Ipomoea violacea. With this database, it was possible to determine the origin region of the drug and/or detect where the cultivation was carried out, aiding in the search of the traffic control agencies, such as the Federal Police in Brazil
Resumo:
Objectives: the aim of this work was to define the range of possible values for each isotope of carbon-13 and nitrogen-15 for cocaine and marijuana seized in Botucatu-SP, with the intention of distinguishing the geographical origin of the drug. Materials and Methods: samples of marijuana and cocaine were collected at the time of incineration. Then, at the Stable Isotope Center from São Paulo State University in Botucatu, São Paulo, Brazil, samples of marijuana were subjected to the drying process and subsequent grinding. Samples of cocaine were not submitted to the processes of drying and grinding because they were already in adequate granulometry. Subsequently, the samples of both drugs were weighed in accordance with the standards for carbon-13 and nitrogen-15. Lastly, CO2 and N2 gases were obtained from the samples through the elemental analyzer. They were then analyzed in a mass spectrometer to obtain values of δ13C and δ15N in ‰. Results and Discussion: the results of marijuana allowed for comparison with regions of Queensland, Australia, according to the range of δ13C between -29.9 ‰ and -29.3 ‰ and δ15N range from 4.1 ‰ to 5.8 ‰. The results were also consistent with those of the state of Pará, Brazil, where the values of δ13C and δ15N were -30.3 ± 0.7 ‰ and 5.0 ± 1.3 ‰, respectively. Also the results were in accordance with those from the state of Mato Grosso do Sul, Brazil, in which δ13C values varied by -28.7 ± 1.3 ‰, and δ15N values varied by 6.6 ± 1.1 ‰, respectively. In both regions, the samples identified as being from Pará and Mato Grosso do Sul showed an overlap. In addition, the results fitted with data from the state of Maranhão, in which the values of δ13C and δ15 N were -28.8 ± 1.6 ‰ and 2.9 ± 2.5 ‰, respectively. In the case of cocaine, the present study could not be related to the results from the literature. One possible explanation may be related to the non-purification of ...
Resumo:
A study was conducted to determine the optimal time for collecting the breath examination urea breath marked with the stable isotope 13C. We selected patients before undergoing the examination of endoscopy at the Endoscopy Section of the University Hospital of Botucatu - SP. A screening was performed to determine which patients wanted and could participate. Before performing endoscopy basal sample was collected from the patient and then the labeled urea ingested. The blows were collected in double every 2.5 minutes until an interval of 30.0 minutes after were collected every 5.0 minutes until the time of 45.0 minutes . The samples were analyzed in a mass spectrometer for isotope ratio, located in the center of Stable Isotopes, Institute of Biosciences, UNESP - Botucatu campus. The data were studied and arranged in the form of graphics to better interpretation of results. Based on the obtained results it was determined that a standby time of 15.0 minutes to collect the wind is sufficient for accurate diagnosis and effective
Resumo:
Purpose: Angiogenesis involves many mediators including integrins, and the tripeptide RGD is a target amino acid recognition sequence for many of them. Hindlimb ischemia is a simple and convenient animal model however standardization of the injection procedures in the devascularized and control limb is lacking, thus rendering difficult the interpretation of results. The aim of this investigations was to evaluate neovascularization in a hindlimb murine model by means of 99mTc-HYNIC-ß-Ala-RGD. Methods: 99mTc-HYNIC-RGD analog was prepared using coligands. Ischemia was induced in Wistar rats by double- ligation of the common femoral artery. Radiolabeled RGD was injected after 2h, as well as 1, 3, 5, 7, 10 and 14 days. Uptake was evaluated by planar imaging and biodistribution studies. Results: The highest ratio between ischemia and control was achieved at the 7th day (2.62 ± 0.95), with substantial decrease by the 14th day. For pertechnetate the 7th day ratio was 0.87 ± 0.23. Scintigraphic image confirmed different uptakes. Conclusion: 99mTc-HYNIC-RGD analog concentrated in ischemic tissue by the time of widespread angiogenesis and pertechnetate confirmed reduction in blood flow. In this sense, the protocol can be recommended for ischemic models.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Esta tesis analiza los elementos que afectan a la evaluación del rendimiento dentro de la técnica de radiodiagnóstico mediante tomografía por emisión de positrones (PET), centrándose en escáneres preclínicos. Se exploran las posibilidades de los protocolos estándar de evaluación sobre los siguientes aspectos: su uso como herramienta para validar programas de simulación Montecarlo, como método para la comparación de escáneres y su validez en el estudio del efecto sobre la calidad de imagen al utilizar radioisótopos alternativos. Inicialmente se estudian los métodos de evaluación orientados a la validación de simulaciones PET, para ello se presenta el programa GAMOS como entorno de simulación y se muestran los resultados de su validación basada en el estándar NEMA NU 4-2008 para escáneres preclínicos. Esta validación se ha realizado mediante la comparación de los resultados simulados frente a adquisiciones reales en el equipo ClearPET, describiendo la metodología de evaluación y selección de los parámetros NEMA. En este apartado también se mencionan las aportaciones desarrolladas en GAMOS para aplicaciones PET, como la inclusión de herramientas para la reconstrucción de imágenes. Por otro lado, la evaluación NEMA del ClearPET es utilizada para comparar su rendimiento frente a otro escáner preclínico: el sistema rPET-1. Esto supone la primera caracterización NEMA NU 4 completa de ambos equipos; al mismo tiempo que se analiza cómo afectan las importantes diferencias de diseño entre ellos, especialmente el tamaño axial del campo de visión y la configuración de los detectores. El 68Ga es uno de los radioisótopos no convencionales en imagen PET que está experimentando un mayor desarrollo, sin embargo, presenta la desventaja del amplio rango o distancia recorrida por el positrón emitido. Además del rango del positrón, otra propiedad física característica de los radioisótopos PET que puede afectar a la imagen es la emisión de fotones gamma adicionales, tal como le ocurre al isótopo 48V. En esta tesis se evalúan dichos efectos mediante estudios de resolución espacial y calidad de imagen NEMA. Finalmente, se analiza el alcance del protocolo NEMA NU 4-2008 cuando se utiliza para este propósito, adaptándolo a tal fin y proponiendo posibles modificaciones. Abstract This thesis analyzes the factors affecting the performance evaluation in positron emission tomography (PET) imaging, focusing on preclinical scanners. It explores the possibilities of standard protocols of assessment on the following aspects: their use as tools to validate Monte Carlo simulation programs, their usefulness as a method for comparing scanners and their validity in the study of the effect of alternative radioisotopes on image quality. Initially we study the methods of performance evaluation oriented to validate PET simulations. For this we present the GAMOS program as a simulation framework and show the results of its validation based on the standard NEMA NU 4-2008 for preclinical PET scanners. This has been accomplished by comparing simulated results against experimental acquisitions in the ClearPET scanner, describing the methodology for the evaluation and selection of NEMA parameters. This section also mentions the contributions developed in GAMOS for PET applications, such as the inclusion of tools for image reconstruction. Furthermore, the evaluation of the ClearPET scanner is used to compare its performance against another preclinical scanner, specifically the rPET-1 system. This is the first complete NEMA NU 4 based characterization study of both systems. At the same time we analyze how do the significant design differences of these two systems, especially the size of the axial field of view and the detectors configuration affect their performance characteristics. 68Ga is one of the unconventional radioisotopes in PET imaging the use of which is currently significantly increasing; however, it presents the disadvantage of the long positron range (distance traveled by the emitted positron before annihilating with an electron). Besides the positron range, additional gamma photon emission is another physical property characteristic of PET radioisotopes that can affect the reconstructed image quality, as it happens to the isotope 48V. In this thesis we assess these effects through studies of spatial resolution and image quality. Finally, we analyze the scope of the NEMA NU 4-2008 to carry out such studies, adapting it and proposing possible modifications.
Resumo:
El trabajo de investigación desarrollado que ha dado lugar a la realización de esta Tesis, aborda la protección de los edificios frente a la entrada de gas radón y su acumulación en los espacios habitados. Dicho gas (isótopo del radón Rn-222) es un elemento radiactivo que se genera, principalmente, en terrenos con altos contenidos de radio (terrenos graníticos por ejemplo). Su alto grado de movilidad permite que penetre en los edificios a través de los materiales de cerramiento del mismo (porosidad de los materiales, fisuras, grietas y juntas) y se acumule en su interior, donde puede ser inhalado en altas concentraciones. La Organización Mundial de la Salud, califica al radón como agente cancerígeno de grado 1. Según este Organismo, el radón es la segunda causa de contracción de cáncer pulmonar detrás del tabaco. Como respuesta a esta alarma, distintos estados ya han elaborado normativas en las que se proponen soluciones para que los niveles de concentración de radón no superen los valores recomendados por los organismos internacionales responsables de la protección radiológica. En España aún no existe normativa de protección frente a este agente cancerígeno causante de numerosas muertes, y es por tal motivo evidente la necesidad de aportar documentación técnica que ayude a las administraciones nacionales y locales a desarrollar dicha normativa para ajustarse a las recomendaciones europeas e internacionales sobre los niveles que no se deben superar y que, por otro lado, ya han contemplado una gran cantidad de países. Como principal aportación de este trabajo se muestran los resultados de reducción de concentración de gas radón de distintas soluciones constructivas enfocadas a frenar la entrada de gas radón al interior de los edificios haciendo uso de técnicas y materiales habituales en el ámbito de la construcción en España. Para ello, se han estudiado las efectividades de dichas soluciones, en lo referente a su capacidad para frenar la inmisión de radón, en un prototipo de vivienda construido al efecto en un terreno con altas concentraciones de radón. Las soluciones propuestas y ensayadas han sido el resultado de una labor de optimización de los sistemas estudiados en la bibliografía con el fin de adaptar las técnicas a los sistemas constructivos habituales en España y en concreto a la situación real del prototipo de vivienda construido en un lugar con contenidos de radón en terreno muy elevados. El trabajo incluye un capítulo inicial con los conceptos básicos necesarios para entender la problemática que supone habitar en espacios con altos contenidos de radón. ABSTRACT The research developed, which has led to the completion of this thesis, deal with the protection of buildings against entry of radon gas and its accumulation in the ocupated spaces. This gas (radon isotope Rn-222) is a radioactive element generated, mainly, in areas with high levels of radio (granitic terrain for example). Its high mobility allows entering in buildings through the enclosure materials of it (porosity of materials, cracks, crevices and joints) and accumulates inside, where it can be inhaled in high concentrations. The World Health Organization describes radon gas as a carcinogen agent in level 1. According to this Agency, radon is the second leading cause of lung cancer behind tobacco. In response to this alarm, some states have developed regulations that propose solutions to reduce radon concentration levels for not exceeding the values recommended by international agencies responsible in radiation protection. In Spain there is still no legislation to protect against this carcinogen element that cause numerous deaths, and for that reason it is evident the need to provide technical documentation to help the national and local governments to develop legislation for reaching the European and international levels recommendations. As the main contribution of this work are the results of reducing radon concentration using different constructive solutions aimed to stop radon entry in buildings, with techniques and materials common in Spain. To do this, effectiveness of such solutions, have been studied in terms of its ability to stop radon entry in a housing prototype built for this purpose in an area with high radon levels. The solutions proposed and tested have been the result of a process of optimization of systems studied in the literature in order to adapt the techniques to Spanish building material and, specifically, to the actual situation of housing prototype built in a place with high contents of radon in soil. The work includes an initial chapter with the basic concepts needed to understand the problem of living in areas with high levels of radon.
Resumo:
El estudio de la radiactividad y su influencia en los seres vivos es un tema fundamental para la formación de los alumnos de los grados en Biología y Ciencias del Mar, y por lo tanto aparece incluido en el plan de estudios de la asignatura de Física de las dos carreras anteriormente mencionadas. A pesar de esto, dicha signatura no cuenta con ninguna práctica de laboratorio en el tema de radiactividad. Esto es debido, principalmente, al alto coste de los equipos y a cuestiones de seguridad. Con el objetivo de solventar este problema en la formación de los alumnos de Física hemos programado, usando el lenguaje JAVA, dos prácticas de laboratorio virtuales en el área de radiactividad. En una de las experiencias, el alumno mide la evolución de la actividad de una muestra radiactiva con el tiempo y a partir de esto podrá obtener la vida media del isótopo radiactivo estudiado, calcular la cantidad de isótopo que queda en la muestra al transcurrir un cierto tiempo, o evaluar el tiempo necesario que debe de transcurrir para que quede un cierto porcentaje del material radiactivo inicial. En la otra experiencia la medición de la actividad y la masa de una muestra dada de carbono de origen biológico, permitirá establecer la edad de la muestra usando el método del 14C. En ambas prácticas el alumno utiliza el instrumental virtual tal y como si estuviera en un laboratorio real con el instrumental adecuado. La interactividad de la práctica y la posibilidad de realizarla fuera de la universidad, a través de internet, hacen de los experimentos virtuales diseñados un excelente complemento a las prácticas tradicionales de laboratorio.