Postural control in women with breast hypertrophy

OBJECTIVES: The consequences of breast hypertrophy have been described based on the alteration of body mass distribution, leading to an impact on psychological and physical aspects. The principles of motor control suggest that breast hypertrophy can lead to sensorimotor alterations and the impairment of body balance due to postural misalignment. The aim of this study is to evaluate the postural control of women with breast hypertrophy under different sensory information conditions. METHOD: This cross-sectional study included 14 women with breast hypertrophy and 14 without breast hypertrophy, and the mean ages of the groups were 39 +/- 15 years and 39 +/- 16 years, respectively. A force platform was used to assess the sensory systems that contribute to postural control: somatosensory, visual and vestibular. Four postural conditions were sequentially tested: eyes open and fixed platform, eyes closed and fixed platform, eyes open and mobile platform, and eyes closed and mobile platform. The data were processed, and variables related to the center of pressure were analyzed for each condition. The Kruskal-Wallis test was used to compare the conditions between the groups for the area of center of pressure displacement and the velocity of center of pressure displacement in the anterior-posterior and medial-lateral directions. The alpha level error was set at 0.05. RESULTS: Women with breast hypertrophy presented an area that was significantly higher for three out of four conditions and a higher velocity of center of pressure displacement in the anterior-posterior direction under two conditions: eyes open and mobile platform and eyes closed and mobile platform. CONCLUSIONS: Women with breast hypertrophy have altered postural control, which was demonstrated by the higher area and velocity of center of pressure displacement.

Robust Nonlinear Output Regulation by Identification Tools

The present thesis focuses on the problem of robust output regulation for minimum phase nonlinear systems by means of identification techniques. Given a controlled plant and an exosystem (an autonomous system that generates eventual references or disturbances), the control goal is to design a proper regulator able to process the only measure available, i.e the error/output variable, in order to make it asymptotically vanishing. In this context, such a regulator can be designed following the well known “internal model principle” that states how it is possible to achieve the regulation objective by embedding a replica of the exosystem model in the controller structure. The main problem shows up when the exosystem model is affected by parametric or structural uncertainties, in this case, it is not possible to reproduce the exact behavior of the exogenous system in the regulator and then, it is not possible to achieve the control goal. In this work, the idea is to find a solution to the problem trying to develop a general framework in which coexist both a standard regulator and an estimator able to guarantee (when possible) the best estimate of all uncertainties present in the exosystem in order to give “robustness” to the overall control loop.

Modelo de diseño orientado a marcos para sistemas basados en el conocimiento

El objetivo de esta Tesis es crear un Modelo de Diseño Orientado a Marcos que, intermedio entre el Mundo Externo y el Modelo Interno del Mundo que supone el sistema ímplementado, disminuya la pérdida de conocimiento que se produce al formalizar la realidad en Bases de Conocimientos. El modelo disminuye la pérdida de conocimiento al formalizar Bases de Conocimiento, acercando el formalismo de Marcos al Mundo Externo, porque: 1. Crea una base teórica que uniformiza el concepto de Marco en el plano de la Formalización, estableciendo un conjunto de restricciones sintácticas y semánticas que impedirán, al Ingeniero del Conocimiento (IC) cuando formaliza, definir elementos no permitidos o el uso indebido de ellos. 2. Se incrementa la expresividad del formalismo al asociar a cada una de las propiedades de un marco clase un parámetro adicional que simboliza la representatividad de la propiedad en el concepto. Este parámetro, y las técnicas de inferencia que trabajan con él, permitirán al IC introducir en el Modelo Formalizado conocimiento que antes no introducía al construir la base de conocimientos y que, sin embargo, sí existía en la realidad. 3. Se propone una técnica de equiparación que trabaja con el conocimiento incierto presente en el dominio. Esta técnica de equiparación, utiliza la representatividad de las propiedades en los marcos clase y el grado de certeza de las propiedades de las entidades para calcular el valor de equiparación y, así, determinar en qué medida los marcos clase seleccionados son consistentes con la descripción de la situación actual dada por una entidad. 4. Proporciona nuevas técnicas de inferencia basadas en la transferencia de propiedades y modifica las ya existentes. Las transferencias de propiedades realizadas sobre relaciones "ad hoc" definidas por el IC al construir el sistema, es una nueva técnica de inferencia independiente y complementaria a la transferencia de propiedades llamada tradicionalmente Herencia (cesión de propiedades entre padres e hijos). A esta nueva técnica, se le ha llamado Donación, es decir, cesión de propiedades entre marcos sin parentesco. Como aportación práctica, se ha construido un entorno de construcción de Sistemas Basados en el Conocimiento formalizados en Marcos, donde se han introducido todos los nuevos conceptos del Modelo Teórico de la Tesis. Se trata de una cierta anidación. Es decir, son marcos que permiten formalizar cualquier SBC en marcos. El entorno permitirá al IC formalizar bases de conocimientos automáticamente y éste podrá validar el conocimiento del dominio en la fase de formalización en lugar de tener que esperar a que la BC esté implementada. Todo ello lleva a describir el Modelo de Diseño Orientado a Marcos como un puente que aproxima y comunica el Mundo Externo con el Modelo Interno asociado a la realidad e implementado en una computadora, disminuyendo así las diversas pérdidas de conocimiento que si bien no ocurren simultáneamente al construir Sistemas Basados en el Conocimiento, sí coexisten en él.---ABSTRACT---The goal of this thesis is to créate a Frame-Orlented Deslgn Model that, bridging the Outside World and the implemented system's Internal Model of the World, reduces the amount of knowledge lost when reality is formalized in Knowledge Bases (KB). The model diminishes the loss of knowledge when formalizing a KB and brings the Frame-formalized Model closer to the Outside World because: 1. It creates a theory that standardizes the concept of trame at the formalization level to establish a set of syntactic and semantic constraints that will prevent the Knowledge Engineer (KE) from defining forbidden elements or their undue use in the formalization process. 2. The formalism's expressiveness is increased by associating an additional parameter to each of the properties of a class frame to symbolize the representativeness of the concept property. This parameter and the related inference techniques will allow the KE to enter knowledge into the Formalized Model that actually existed but that was not used previously when building the KB. 3. The proposed technique involves matching and works with uncertain knowledge present in the domain. This matching technique takes the representativeness of the properties in the class frame and the degree of certainty of the properties of the entities to calcúlate the matching valué and thus determine to what extent the class frames selected are consistent with the description of the present situation given by an entity. 4. It offers new inference techniques based on property transfer and alters existing ones. Property transfer on ad hoc relations defined by the KE when building a system is a new inference technique independent of and complementary to property transfer traditionally termed Inheritance (transfer of properties between parents and children). This new technique has been callad Donation (transfer of properties between trames without relationships). 5. It improves control of the procedural knowledge defined in the trames by introducing OO concepta. A frame-formalized KBS building environment has been constructed, incorporating all the new concepts of the theoretical model set out in the thesis. There is some embedding, that is, they are trames that provide for any KBS to be formalizad in trames. The environment will enable the KE to formaliza KB automatically, and he will be able to valídate the domain knowledge in the formalization stage instead of havíng to wait until the KB has been implemented. This is a description of the Frame-oriented Design Model, a bridge that brings closer and communicates the Outside World with the Interna! Model associated to reality and implemented on a computar, thus reducing the different losses in knowledge that, though they do not occur simultaneosly when building a Knowledge-based System, coexist within it.

Novel strategies in feedforward adaptation to a position-dependent perturbation

To investigate the control mechanisms used in adapting to position-dependent forces, subjects performed 150 horizontal reaching movements over 25 cm in the presence of a position-dependent parabolic force field (PF). The PF acted only over the first 10 cm of the movement. On every fifth trial, a virtual mechanical guide (double wall) constrained subjects to move along a straight-line path between the start and target positions. Its purpose was to register lateral force to track formation of an internal model of the force field, and to look for evidence of possible alternative adaptive strategies. The force field produced a force to the right, which initially caused subjects to deviate in that direction. They reacted by producing deviations to the left, into the force field, as early as the second trial. Further adaptation resulted in rapid exponential reduction of kinematic error in the latter portion of the movement, where the greatest perturbation to the handpath was initially observed, whereas there was little modification of the handpath in the region where the PF was active. Significant force directed to counteract the PF was measured on the first guided trial, and was modified during the first half of the learning set. The total force impulse in the region of the PF increased throughout the learning trials, but it always remained less than that produced by the PF. The force profile did not resemble a mirror image of the PF in that it tended to be more trapezoidal than parabolic in shape. As in previous studies of force-field adaptation, we found that changes in muscle activation involved a general increase in the activity of all muscles, which increased arm stiffness, and selectively-greater increases in the activation of muscles which counteracted the PF. With training, activation was exponentially reduced, albeit more slowly than kinematic error. Progressive changes in kinematics and EMG occurred predominantly in the region of the workspace beyond the force field. We suggest that constraints on muscle mechanics limit the ability of the central nervous system to employ an inverse dynamics model to nullify impulse-like forces by generating mirror-image forces. Consequently, subjects adopted a strategy of slightly overcompensating for the first half of the force field, then allowing the force field to push them in the opposite direction. Muscle activity patterns in the region beyond the boundary of the force field were subsequently adjusted because of the relatively-slow response of the second-order mechanics of muscle impedance to the force impulse.

Position information but not force information is used in adapting to changes in environmental dynamics

This study investigated how movement error is evaluated and used to change feedforward commands following a change in the environmental dynamics. In particular, we addressed the question of whether only position-error information is used or whether information about the force-field direction can also be used for rapid adaptation to changes in the environmental dynamics. Subjects learned to move in a position-dependent force field (PF) with a parabolic profile and the dynamics of a negative spring, which produced lateral force to the left of the target hand path. They adapted very rapidly, dramatically reducing lateral error after a single trial. Several times during training, the strength of the PF was unexpectedly doubled (PF2) for two trials. This again created a large leftward deviation, which was greatly reduced on the second PF2 trial, and an aftereffect when the force field subsequently returned to its original strength. The aftereffect was abolished if the second PF2 trial was replaced by an oppositely directed velocity-dependent force field (VF). During subsequent training in the VF, immediately after having adapted to the PF, subjects applied a force that assisted the force field for similar to 15 trials, indicating that they did not use information about the force-field direction. We concluded that the CNS uses only the position error for updating the internal model of the environmental dynamics and modifying feedforward commands. Although this strategy is not necessarily optimal, it may be the most reliable strategy for iterative improvement in performance.

Sistema de conversão de energia eólica baseado no gerador de indução duplamente alimentado: análise e contribuição ao controle da máquina

The humanity reached a time of unprecedented technological development. Science has achieved and continues to achieve technologies that allowed increasingly to understand the universe and the laws which govern it, and also try to coexist without destroying the planet we live on. One of the main challenges of the XXI century is to seek and increase new sources of clean energy, renewable and able to sustain our growth and lifestyle. It is the duty of every researcher engage and contribute in this race of energy. In this context, wind power presents itself as one of the great promises for the future of electricity generation . Despite being a bit older than other sources of renewable energy, wind power still presents a wide field for improvement. The development of new techniques for control of the generator along with the development of research laboratories specializing in wind generation are one of the key points to improve the performance, efficiency and reliability of the system. Appropriate control of back-to-back converter scheme allows wind turbines based on the doubly-fed induction generator to operate in the variable-speed mode, whose benefits include maximum power extraction, reactive power injection and mechanical stress reduction. The generator-side converter provides control of active and reactive power injected into the grid, whereas the grid-side converter provides control of the DC link voltage and bi-directional power flow. The conventional control structure uses PI controllers with feed-forward compensation of cross-coupling dq terms. This control technique is sensitive to model uncertainties and the compensation of dynamic dq terms results on a competing control strategy. Therefore, to overcome these problems, it is proposed in this thesis a robust internal model based state-feedback control structure in order to eliminate the cross-coupling terms and thereby improve the generator drive as well as its dynamic behavior during sudden changes in wind speed. It is compared the conventional control approach with the proposed control technique for DFIG wind turbine control under both steady and gust wind conditions. Moreover, it is also proposed in this thesis an wind turbine emulator, which was developed to recreate in laboratory a realistic condition and to submit the generator to several wind speed conditions.

Contribuições à estratégia de controle sem detecção de harmônicos aplicada a um filtro ativo de potência paralelo

The conventional control schemes applied to Shunt Active Power Filters (SAPF) are Harmonic extractor-based strategies (HEBSs) because their effectiveness depends on how quickly and accurately the harmonic components of the nonlinear loads are identified. The SAPF can be also implemented without the use of the load harmonic extractors. In this case, the harmonic compensating term is obtained from the system active power balance. These systems can be considered as balanced-energy-based schemes (BEBSs) and their performance depends on how fast the system reaches the equilibrium state. In this case, the phase currents of the power grid are indirectly regulated by double sequence controllers with two degrees of freedom, where the internal model principle is employed to avoid reference frame transformation. Additionally the DSC controller presents robustness when the SAPF is operating under unbalanced conditions. Furthermore, SAPF implemented without harmonic detection schemes compensate simultaneously harmonic distortion and reactive power of the load. Their compensation capabilities, however, are limited by the SAPF power converter rating. Such a restriction can be minimized if the level of the reactive power correction is managed. In this work an estimation scheme for determining the filter currents is introduced to manage the compensation of reactive power. Experimental results are shown for demonstrating the performance of the proposed SAPF system.

Acompanhamento da reabilitação estrutural da ETA de Morgavel

Relatório de Estágio para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Integração de reacção e deliberação em agentes inteligentes

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Redes de Comunicação e Multimédia

A utilização do ERP Powerbill no controlo das áreas de gestão de consumos, gestão de pagamentos automáticos e gestão de facturação, na Cooperativa de Electrificação A LORD, CRL

Trabalho de Projecto apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Auditoria, sob orientação do Professor Luís Rodrigues (Doutor)

Controlo de qualidade interno: elaboração de um programa de Controlo de Qualidade Interno segundo as boas práticas da Qualidade

RESUMO: Esta dissertação pretende apresentar uma proposta para um programa de Controlo de Qualidade interno das hormonas tiroideias, segundo as boas práticas da qualidade. Para que se comprove o rigor e fiabilidade dos seus resultados analíticos, condição indispensável para que estes possam servir de base às mais diversas tomadas de decisão, toda a filosofia que envolve a qualidade assume um papel preponderante. Neste contexto a elaboração de um programa de controlo de qualidade adequado é muito importante e imprescindível. A realização do controlo de qualidade permite monitorizar o desempenho de todos os materiais, equipamentos, instrumentos e métodos analíticos bem como criar sinais de alerta para prevenir a emissão de resultados não-conformes e indicar a necessidade de ações corretivas. Permite também indicar a necessidade de melhorias em processos e em atividades ligadas aos operadores e consciencializar o pessoal de que o controlo da qualidade é um dever para com o cliente e tem a função de gerar confiança nos resultados obtidos. O controlo de qualidade interno abrange todos os procedimentos assumidos por um laboratório para avaliação contínua do seu trabalho. A sua finalidade é assegurar a consistência dos resultados diários e a sua conformidade com critérios definidos, avaliando a precisão dos ensaios e dando indicação do momento para se promoverem ações corretivas quando surge uma não conformidade. Segundo as melhores práticas da qualidade, serão calculados os valores do controlo de qualidade interno para as hormonas tiroideias, os seus limites e critérios (regras) de aceitabilidade, com base na relação entre o desempenho analítico e o Erro Máximo Admissível. Pretende-se assim, otimizar o desempenho do Controlo de Qualidade Interno, aperfeiçoando a capacidade de identificação do erro.-------- ABSTRACT: This paper intends to submit a proposal for a thyroid hormones internal quality Control program, according to the best quality practices. The whole philosophy involving quality plays a central role in order to prove the accuracy and reliability of the analytical results, a basic prerequisite for decision making. In this context the elaboration of an appropriate quality control program is essential and very important. Quality control allows the motorization of the performance of all materials, equipment, instruments and analytical methods, as well as the creation of warning signals indicating the need for corrective actions, to prevent the release of non-compliant results. It also indicates the need for improvements in the processes and operating activities as well as making the staff aware that quality control is a duty to the client and promotes confidence in the results. The internal quality control covers all procedures undertaken by a laboratory for a continuous evaluation of its performance. Its purpose is to ensure the consistency of the daily results and compliance with defined criteria, assessing the accuracy of the tests and indicating the moment to promote corrective actions when nonconformity appears. According to the best quality practices, the values of the internal quality control for the thyroid hormones, their limits and criteria (rules) of acceptability will be calculated, based on the relationship between analytical performance and the maximum allowable error. Thus, the aim is to optimize the performance of the Internal Quality Control, improving the ability for error detection and identification.

Market risk charge of the trading book: a comparison of the Basel II and Basel III

This paper aims to investigate if the market capital charge of the trading book increased in Basel III compared to Basel II. I showed that the capital charge rises by 232% and 182% under the standardized and internal model, respectively. The varying liquidity horizons, the calibration to a stress period, the introduction of credit spread risk, the restrictions on correlations across risk categories and the incremental default charge boost Basel III requirements. Nevertheless, the impact of Expected shortfall at 97.5% is low and long term shocks decrease the charge. The standardized approach presents advantages and disadvantages relative to internal models.

A safety run-in and randomized phase 2 study of cilengitide combined with chemoradiation for newly diagnosed glioblastoma (NABTT 0306).

BACKGROUND: Cilengitide is a selective integrin inhibitor that is well tolerated and has demonstrated biologic activity in patients with recurrent malignant glioma. The primary objectives of this randomized phase 2 trial were to determine the safety and efficacy of cilengitide when combined with radiation and temozolomide for patients with newly diagnosed glioblastoma multiforme and to select a dose for comparative clinical testing. METHODS: In total, 112 patients were accrued. Eighteen patients received standard radiation and temozolomide with cilengitide in a safety run-in phase followed by a randomized phase 2 trial with 94 patients assigned to either a 500 mg dose group or 2000 mg dose group. The trial was designed to estimate overall survival benefit compared with a New Approaches to Brain Tumor Therapy (NABTT) Consortium internal historic control and data from the published European Organization for Research and Treatment of Cancer (EORTC) trial EORTC 26981. RESULTS: Cilengitide at all doses studied was well tolerated with radiation and temozolomide. The median survival was 19.7 months for all patients, 17.4 months for the patients in the 500 mg dose group, 20.8 months for patients in the 2000 mg dose group, 30 months for patients who had methylated O6-methylguanine-DNA methyltransferase (MGMT) status, and 17.4 months for patients who had unmethylated MGMT status. For patients aged ≤70 years, the median survival and survival at 24 months was superior to what was observed in the EORTC trial (20.7 months vs 14.6 months and 41% vs 27%, respectively; P = .008). CONCLUSIONS: Cilengitide was well tolerated when combined with standard chemoradiation and may improve survival for patients newly diagnosed with glioblastoma multiforme regardless of MGMT methylation status. The authors concluded that, from an efficacy and safety standpoint, future trials of this agent in this population should use the 2000 mg dose. Cancer 2012. © 2012 American Cancer Society.

A correlation sensitivity analysis of non-life underwriting risk in solvency capital requirement estimation

This paper analyses the impact of using different correlation assumptions between lines of business when estimating the risk-based capital reserve, the Solvency Capital Requirement (SCR), under Solvency II regulations. A case study is presented and the SCR is calculated according to the Standard Model approach. Alternatively, the requirement is then calculated using an Internal Model based on a Monte Carlo simulation of the net underwriting result at a one-year horizon, with copulas being used to model the dependence between lines of business. To address the impact of these model assumptions on the SCR we conduct a sensitivity analysis. We examine changes in the correlation matrix between lines of business and address the choice of copulas. Drawing on aggregate historical data from the Spanish non-life insurance market between 2000 and 2009, we conclude that modifications of the correlation and dependence assumptions have a significant impact on SCR estimation.