Avaliação das dimensões transversas na maxila e mandíbula em pacientes na fase da dentição mista tratados com aparelho ortodôntico removível superior

Objeti vo: Avaliar os efeitos da expansão lenta na maxila e na mandíbula com o aparelho ortodônti co removível superior com torno de expansão simétrico e mediano, nas regiões oclusal, gengival e alveolar de pacientes jovens com atresia maxilar. Método: A amostra compreendeu 18 indivíduos leucodermas (11 meninas e 7 meninos; idade média: 8 anos e 10 meses no início do tratamento) que apresentavam atresia da maxila, acompanhadas ou não de mordida cruzada posterior uni ou bilateral na fase de denti ção mista. Todos os pacientes foram tratados com aparelho ortodônti co removível superior com torno de expansão simétrico e mediano, sendo o tempo médio de tratamento de 15,4 meses (± 7,6). Para avaliar a infl uência do tratamento nas mensurações dos pontos demarcados nas regiões oclusal, gengival e alveolar, foram uti lizados os modelos de gesso dos arcos superior e inferior (36 pares) obti dos em dois tempos: T1: início do tratamento e T2: ao fi nal do tratamento. Para cada paciente em ambos os tempos, foram mensuradas as distâncias transversas na região oclusal entre caninos decíduos, 1o molares decíduos ou 1o pré-molares permanentes e entre 1o molares permanentes, superiores e inferiores. Para verifi car se a movimentação ocorreu por inclinação ou por movimento de corpo, foram uti lizadas também medidas nas regiões gengival e alveolar. Os dados foram avaliados estati sti camente pelo teste “t student para amostras pareadas (5%). Resultados: Observou-se que em T2, todas as distâncias mensuradas para as regiões oclusal, gengival e alveolar apresentaram valores estati sti camente superiores às mesmas medidas em T1 (p<0,05). Conclusão: O aparelho ortodônti co removível superior é efeti vo nos casos de expansão lenta da maxila, agindo também indiretamente nas dimensões transversas do arco inferior.

Análise da dieta e condição de saúde bucal em pacientes gestantes

Objectve: To perform a critical analysis of the diet record model adopted, to evaluate the cariogenicity of the maternal diet, and the incidence of dental caries in pregnant women treated at a prevent on clinic in an undergraduate dental course. Method: A cross-sectional study was performed with consultations to the database of the clinic and review of patients' charts and diet records. The sample was calculated and 205 patents were randomly selected. Bivariate statistical analysis was done at a significance level of 5% (α=0.05), using the statistical soft wares Epi Info versão 3.2, GraphPad Instat 3.6 and BioEstat. Results: The analysis of the diet records showed that 68.8% of the pregnant women presented a cariogenic diet, with high frequency of ingest on of fermentable carbon hydrates, mainly sucrose, with liquid consistency, and preferably consumed between the main meals. There was higher trend of the pregnant women mentioning a low frequency of carbon hydrate ingestion during the interview, while registering a diet rich of these components in their diet records (p<0.0001). The mean DMFT of the patients was 13.9 ± 5.4. There was no statistically significant association between diet and oral health variables (p>0.05). Conclusion: The diet record was proven an effective and valid method, if correctly employed. The prevalence of dental caries in the group of pregnant women was high and, although more than half of the sample presented a cariogenic diet, a significant association between diet and co-factors was not found.

Avaliação clínica e microbiológica do tratamento da estomatite protética com tintura de Schinus terebinthifolius Raddi (Aroeira)

Objective: To evaluate the clinical efficacy of Schinus terebinthifolius Raddi (aroeira) tincture in the treatment of denture stomatitis. Method: Eighteen removable denture wearers with clinical diagnosis of type II denture stomatts and presence of candidosis associated to the denture use, as confirmed by clinical and mycological examinations, were selected for the study. The patients were allocated to two groups: TG (test group) - treatment with Schinus terebinthifolius Raddi (aroeira) tincture; CG (control group), treatment with nystatin. All patients were instructed to clean the dentures with toothbrush and dentifrice, and then apply the product on the palatal mucosa and on denture surface 3 times a day, during 15 consecutive days, removing the denture at bedtime and keeping it in a receptacle with water. At the 15th day of use, the clinical and mycological examinations were redone to evaluate treatment efficacy. Data were analyzed statistically by Wilcoxon and Mann-Whitney tests at 5% significance level. Results: The inflammatory process and Candida spp. infect on were eliminated in 66.7% and 77.8% of the cases, respectively, in TG. In CG, elimination of the inflammatory process and fungal infect on occurred in 77.8% and 88.9% of the cases, respectively. These results were statistically significant (p=0.01). There was no statistically significant difference between the treatments (p>0.05). In all cases, fungal infect on was detected only on the denture, and C. albicans was the most prevalent microorganism, being present in 94.4% of the cases. Conclusion: The treatment with Schinus terebinthifolius Raddi (aroeira) tincture was effective in the treatment of denture stomatitis, promoting remission of the inflammatory process and Candida spp infection.

Influência de diferentes sistemas adesivos na resistência de união de pinos de fibra à dentina intrarradicular

Objective: To evaluate the influence of three adhesive systems on the bond strength of fiber post luted to root dentine. The hypothesis was that the bond strength is influenced by the adhesive system. Method: The canals of thirty single-root bovine roots (16mm in length) were prepared using the preparation drill (FGM) until 12mm. 14 mm of each root was embedded with acrylic resin and the specimens were allocated into three groups (n=10), considering the factor adhesive (3 levels): Gr1- Scotchbond Multipurpose Plus (3M ESPE), Gr2- One Step (Bisco) and Gr3- Excite DSC (Ivoclar Vivadent). The adhesive systems were applied using a microbrush, according to the manufacture's recommendations. The fiber posts (White Post DC, FGM) were luted with dual resin cement (All-Cem,FGM). After, the cores with composite resin (Llis, FGM) were made and each set of root/post/core was submitted to the mechanical cycling (Erios, Brazil) (10 6 cycles, 84N, 4 Hz, inclination of 45 o, 37 oC, water). Each specimen was cut in 4 samples (1.8mm in thickness), which were submitted to the push-out test in a universal testing machine (ServoPulser - Shimadzu) (50Kgf, 1mm/min). The data (MPa) were analyzed using ANOVA (1-way) and Tukey test (5%). Results: The factor adhesive (P=0.00352) influenced the bond strength significantly (ANOVA). Gr1 (6.8±3.8 MPa) a presented higher bond strength values than Gr2 (3.1±1.5 MPa) b and similar to Gr3 (4.4±3.3) a,b. Moreover, Gr3 and Gr2 were similar between them (Tukey). The hypothesis was accepted. Conclusion: Based on the results it was concluded that chemical and dual polymerization adhesive system should be used for the adhesive luting fiber post procedures.

Reprodutibilidade de medidas antropométricas estáticas de graduandos de odontologia e de mochos odontológicos

Objective: To evaluate the intraexaminer reproducibility of static anthropometric measurements of undergraduate dental students as well as the characteristics and regulating measurements of the dental stools used by them. Methods: Forty volunteers and 6 types of dental stools were evaluated. For the anthropometric measurements the employed equipments were: an adapted office chair, aflexible measuring tape with two adapted rods, a metallic device with a 90 degree central angle, string, a 35 x 24 cm rectangular wooden board, isolating tape and crepe tape. In order to standardize the position of the adapted office chair and the volunteers' feet, the floor was marked with the isolating and crepe tapes. A string was attached to the waist of each volunteer to mark the area corresponding to the kidney region making it possible to measure the seat-renal region area. The examined anthropometric measurements were height, trunkcephalic heigh, sacral-popliteal distance (OK?), hip width, popliteal height and the seat-renal region height. The evaluated characteristics of the dental stools relative to the seat were depth, horizontal width and minimum/maximum height. The back of the dental stool was evaluated as for the minimum/ maximum height adjustment. The anthropometric and dental stool measurements were obtained by a single examiner at two moments with a 1-week interval between the evaluations. Intra-class correlation coefficient (ρ) was used to estimate the intraexaminer reproducibility. Results: Excellent reproducibility was observed for all anthropometric measurements obtained (ρ=0.99) as well as for all dental stools evaluated (ρ=0.99). Conclusion: The method used to obtain the anthropometric and dental stools measurements was reproducible and can be used reliably.

Contaminação microbiana das soluções de processamento radiográfico: Risco de infecção cruzada

Objective: To evaluate the microbial contamination in samples of radiographic developing and fixing solutions, radiographic processing water, dental unit waterlines and dental office's external water supply. Methods: Samples of 50 private dental offices and 20 dental offices of the School of Dentistry de Araçatuba-UNESP were collected. The samples were subjected to neutralization of the residual inhibitory agents followed by pre-enrichment in peptone water and EVA broth and were inoculated in selective and non-selective culture media. The DNA of the samples was extracted and the presence of superinfectant microorganisms was evaluated by PCR. The differences in the prevalence of the microorganisms in the samples of the solutions were analyzed by repeated-measures analysis of variance for category data, while the Chi-Square and Mann-Whitney tests were used to evaluate the existence of associations between the total number of heterotrophic microorganisms and infection control protocols. The significance level was set at 5%. Results: Samples of radiographic fixing solution presented a remarkably less frequent contamination than radiographic developing solution and radiographic processing water. The latter exhibited microorganisms typically originated from the oral microbiota and human skin as well as microorganisms frequently found in dental unit waterlines. There was less contamination of radiographic processing water in the dental offices where the x-ray film packets were disinfected before processing or were covered by a plastic film. Additionally, all samples of dental office's external water supply were drinkable. Conclusion: Covering the x-ray film packets with a plastic film protection barrier was proven the best manner to reduce the contamination of the evaluated solutions.

Escala de ansiedade odontológica: Reprodutibilidade das respostas dadas em entrevistas telefônicas e pessoais

Objective: To estimate the intra-examiner reproducibility of the Dental Anxiety Scale (DAS) when applied by phone and personal interviews and to evaluate the association between the level of anxiety and the factors of interest. Method: The participants were 50 individuals (n=38 females) with mean age of 23.9±8.9 years, living in the city of Araraquara, SP, Brazil. The volunteers answered the DAS by means of two phone interviews with one-week interval between them. After 30 days, the DAS was applied to the same participants by means of personal interviews at two moments with one-week interval between them. Intra-examiner reproducibility was determined using Kappa (K) statistics by point and by confidence interval. Results: The intra-examiner agreement for the level of anxiety was 0.82 (0.75-0.90) for the phone interview and 0.69 (0.60-0.79) for the personal interview. Two of the DAS questions presented statistically significant difference in the intra-examiner reproducibility, with better agreement for the answers given by the participants during phone calls. The prevalence of dental anxiety in the sample was 92.0%, in such a way that 70.0%, 18.0% and 4.0% of them presented low, moderate and exacerbated anxiety. Conclusion: The classification of the individuals according to the anxiety level performed by means of phone and personal interviews presented statistically similar agreement. However, there was better agreement with phone calls for the questions referring to anxiety in the dental office's waiting room and during preparation of the motor for use in the dental treatment.

Influência de protocolos de jateamento na rugosidade da superfície de uma cerâmica de zircônia tetragonal parcialmente estabilizada por ítria

Objective: To evaluate the influence of different air abrasion protocols on the surface roughness of an yttria-stabilized polycrystalline tetragonal zirconia) (Y-TZP) ceramic, as well as the surface topography of the ceramic after the treatment. Method: Fifty-four specimens (7.5×4×7.5mm) obtained from two ceramic blocks (LAVA, 3M ESPE) were flattened with fine-grit sandpaper and subjected to sintering in the ceramic system's specific firing oven. Next, the specimens were embedded in acrylic resin and the surfaces to be treated were polished in a polishing machine using sandpapers of decreasing abrasion (600- to 1,200-grit) followed by felt discs with 10μm and 3μm polishing pastes and colloidal silica. The specimens were then randomly assigned to 9 groups, according to factors particle and pressure(n=6): Gr1- control; Gr2- Al 2O 3(50μm)/2.5 bar; Gr3- Al 2O 3(110μm)/2.5 bar; Gr4- SiO 2(30μm)/2.5 bar; Gr5- SiO 2(30μm)/2.5 bar; Gr6- Al 2O 3(50μm)/3.5 bar; Gr7- Al2O3(110μm)/3.5 bar; Gr8- SiO 2(30μm)/3.5 bar; Gr9- SiO 2(30μm)/3.5 bar. After treatments, surface roughness was analyzed by a digital optical profilometer and the morphology was examined by scanning electron microscopy (SEM). Data (μm) were subjected to statistical analysis by Dunnett's test (5%), two-way ANOVA and Tukey's test (5%). Results: The type of particle (p=0.0001) and the pressure (p=0.0001) used in the air abrasion protocols influenced the surface roughness values among the experimental groups (ANOVA). The mean surface roughness values (μm) obtained for the experimental groups (Gr2 to Gr9) were, respectively: 0.37 D; 0.56 BC; 0.46 BC; 0.48 CD; 0.59 BC; 0.82 A; 0.53B CD; 0.67 AB. The SEM analysis revealed that Al 2O 3, regardless of the particle size and pressure used, caused damage to the surface of the specimens, as it produced superficial damages on the ceramic, in the form of grooves and cracks. Conclusion: Al2O3 (110 μm/3.5 bar) air abrasion promoted the highest surface roughness on the ceramics, but it does not mean that this protocol promotes better ceramic-cement union compared to the other air abrasion protocols.

Caracterização analítica de sucos e néctares de laranja adoçados com sacarose e edulcorantes

Objective: To characterize physically and chemically, non-sweetened orange juices and orange nectars sweetened with sucrose or sweet flavoring agents, with respect to their pH, titratable acidity (TA) and total soluble solids content (TSSC), as well as to evaluate the correlation of the latter property with the others. Method: Aliquots of three lots of two orange juices and two orange nectars containing sucrose and two containing sweet flavoring agents were evaluated. Mineral water was used as a control. The TSSC was determined using an Abbe refractometer. The pH was recorded using a digital pH meter, while TA was quantified by titrating samples of the beverages with 0.1 M NaOH until reaching pHs 5.5 and 7.0. Data were subjected to Pearson's correlation test, regression analysis, analysis of variance and Tukey's test (α=0.05). Results: TSSC values presented a strong correlation with TA, and these properties exhibited a quadratic relationship. Although the pH values were not dependent on the presence of sucrose or sweet flavoring agents, a significantly greater amount of base was necessary to reach pHs 5.5 and 7.0 in the beverages without sucrose or flavoring agents. Conclusion: Orange juices and nectars presented similar pH values, which was not associated with the presence of sucrose or sweet flavoring agents in the beverages. Higher TA values were obtained for the juice and lower for the nectars, regardless of containing sucrose or sweet flavoring agents. The increase of TSSC did not implicate in decrease of TA in the beverages.

Avaliação de usuários da atenção básica sobre a implantação de protocolo de assistência integral odontológica

Objective: To evaluate the perception of basic attention healthcare users as to the implantation of the Integral Dental Assistance Protocol (PAIO, in Portuguese) and the effect of this program on the oral health condition, oral hygiene, access to and resolubility of the service, in a public basic health unit of João Pessoa-PB. Method: The sample was composed of 32 volunteers, for whom a sixphase intervention was programed: diagnosis of dental needs; resolution of urgencies; restorative interventions; application of promotional measures; evaluation of the health level obtained; and periodic follow-up visits. Data were collected by means of a semistructured interview and a questionnaire, applied before and after PAIO implantation. The interviews were transcribed and analyzed according to the content analysis technique. The effect of PAIO implantation was evaluated by using an increasing scoring system ranging from 1 to 10. The Wilcoxon test was applied with a confidence level of 95%. Results: For the participants that attended the PAIO (n=20), the program contributed to improve oral health condition (100%) and knowledge (100%). The users reported satisfaction (n=12) and had a positive evaluation (n=12), achieved by means of the improvement of oral health condition (n=8), faster and easier access to treatment (n=7), scheduling of dental appoints and warrant of being treated (n=6), welcoming (n=5), motivation for oral care (n=5), and perspective of continuity of PAIO (n=6). The initial evaluation of the users received scores between 5.7 and 7.6. After PAIO implantation, the users' perception was improved (p<0.01), with scores between 9.6 and 9.9. Conclusion: According to the users, the implantation of PAIO contributed to the qualification of health service and oral health care, being a favorable aspect to increase the access to and resolubility of the service.

Fatores de risco de desordens osteomusculares presentes no posto de trabalho de estudantes de odontologia

Objective: To identify the perception of undergraduate dental students with respect of the risk factors present at the study/work place that could contribute to the development of musculoskeletal disorders. Method: A total of 348 undergraduate dental students from Araraquara Dental School - UNESP were evaluated. The Portuguese version of the Work-related activities that may contribute to job-related pain and/or injury questionnaire was used. Data were analyzed by descriptive statistics. Results: The mean perception of the undergraduates was 5.68 (SD=1.92). The factors with highest mean values were continue working with some kind of pain or lesion (7.49, SD=2.55), bending or twisting the back in an uncomfortable manner (7.39, SD=2.59), working in uncomfortable/inadequate positions (7.27. SD=2.60) and working in the same position for long periods (7.02. SD=2.53). Overall, female students presented higher mean scores of perception than male students. The body parts with highest prevalence of pain were the neck (67.0%) and lower back (65.8%). Conclusion: The students showed perception in relation to the risk factors for musculoskeletal disorders present at the study/work place.

Desmame precoce: Falta de conhecimento ou de acompanhamento?

Objective: To assess the knowledge of women and the instructions received on breastfeeding during pregnancy and after childbirth, and their influence on breastfeeding practice. Method: This study was a longitudinal investigation following 84 pairs of mothers and babies from pregnancy through the sixth month of baby's life. In the first phase of the research, interviews were made with the pregnant women at home and at Basic Health Units to collect information about their intentions and knowledge of breastfeeding. In the second phase of the research, mothers and babies were followed up from the first to sixth month of baby's life to record the difficulties of breastfeeding and reasons for weaning. Results: In the first month, 94.3% (82) of the babies were breastfed, but only 49.4% (43) were breastfed exclusively. At the end of the sixth month of life, 43.7% (38) of the babies had already been weaned. No mother breastfed exclusively her baby within the sixth month. During pregnancy, 60.7% (51) of the mothers had no instructions about breastfeeding and 83.4% (70) of the mothers received instructions on breastfeeding after childbirth. Most mothers (76.2%) knew about the ideal breastfeeding period. Seventy-three (86.9%) mothers believed that breastfeeding was beneficial for the baby, but only 41 (48.8%) of them really breastfed. Only 11 (13.1%) mothers were followed up by the public health system team during lactation. Conclusion: Although most women had been instructed during pregnancy or after childbirth and had knowledge of breastfeeding, early weaning occurred. Advising is important, but the support and follow up of the mothers are of utmost importance for a successful breastfeeding practice.

Avaliação da liberação de íon fluoreto de cimentos ionoméricos antes e após a recarga e com proteção da superfície

Objective: To evaluate fluoride ion release from two anhydrous glass ionomer cements (GICs) and two resin-modified GICs (RMGICs) before and after recharge with 2% neutral sodium fluoride for 4 min and after surface protection of the Maxxion R GIC with an adhesive system, a cavity varnish and a colorless nail polish. Method: A stainless steel 2x6 mm matrix was used for fabricating 5 specimens of each material, which were immersed in 5 mL of deionized water, renewed every 24 h. Measurements with a potentiometer were performed on days 1, 2, 9 and 17, in the 1st and 2nd phases, and the specimens were buffered with a TISAB III solution. In the 2nd phase, the specimens were subjected to recharge and immersed again in 5 mL of deionized water. In the 3rd phase, the GIC surfaces were protected and readings were made at 5 min, 24 h, 48 h and 72 h. Tukey's post-hoc and Student's t tests were used for statistical analyses (p<0.05). Results: There was statistically significant difference in the comparison between the 1st and 2nd phases for all materials, except at day 2 for Vidrion R and VitroFil LC. In the 3rd phase, it was observed that for all materials, comparison of the first 5 min with the other times revealed statistically significant differences among the means of fluoride ion release. In the comparison with the other times, both the varnish and the colorless nail polish presented statistically significant difference between 24 and 48 h as well as between 24 and 72 h. Conclusion: The anhydrous GICs were more effective in fluoride ion release and recharge compared with the RMGICs. Maxxion R presented a homogeneous and statistically significant behavior in both phases. All materials for surface protection were efficient and the colorless nail polish had the best behavior.

Religião, juventude e trabalho social: processos identitários na agência missionária evangélica Jocum

Pós-graduação em Ciências Sociais - FFC

A construção do conhecimento científico: a web semântica como objeto de estudo

Pós-graduação em Ciência da Informação - FFC