Chapter 6 Economic integration and changes in industrial location in Vietnam

Vietnam has been praised for its achievements in economic growth and success in poverty reduction over the last two decades. The incidence of poverty reportedly fell from 58.1% in 1993 to 19.5% in 2004 (VASS [2006, 13]). The country is also considered to have only a moderate level of aggregate economic inequality by international comparisons. As of the early 2000s, Vietnam’s consumption-based Gini coefficient is found to be comparable to that of other countries with similar levels of per capita GDP. The Gini index did increase between 1993 and 2004, but rather slowly, from 0.34 to 0.37 (VASS [2006, 13]). Yet, as the country moves on with its market oriented reforms, the question of inequality has been highlighted in policy and academic discourses. In particular, it is pointed out that socio-economic inequalities between regions (or provinces) are significant and have been widening behind aggregate figures (NCSSH [2001], Mekong Economics [2005], VASS [2006]). Between 1993 and 2004, while real per capita expenditure increased in all regions, it grew fastest in those regions with the highest per capita expenditures and vice versa, resulting in greater regional disparities (VASS [2006, 37]). A major contributing factor to such regional inequalities is the uneven distribution of industry within the country. According to the Statistical Yearbook of Vietnam, of the country's gross industrial output in 2007, over 50% belongs to the South East region, close to 25% to the Red River Delta, and about 10% to the Mekong River Delta. All remaining regions share some 10% of the country's gross industrial output. At a quick glance, the South East increased its share of the total industrial gross output in the 1990s, while the Red River Delta started to gain ground in more recent years. How can the government deal with regional disparities is a valid question. In order to offer an answer, it is necessary in the first place to grasp the trend of disparities as well as its background. To that end, this paper is a preparatory endeavor. Regional disparities in industrial activities can essentially be seen as a result of the location decisions of enterprises. While the General Statistics Office (GSO) of Vietnam has conducted one enterprise census (followed by annual enterprise surveys) and two stages of establishment censuses since 2000, sectorally and geographically disaggregated data are not readily available. Therefore, for the moment, we will draw on earlier studies of industrial location and the determinants of enterprises’ location decisions in Vietnam. The remainder of this paper is structured as follows. The following two sections deal with the country context. Section 2 will outline some major developments in Vietnam’s international economic relations that may affect sub-national location of industry. According to the theory of spatial economics, economic integration is seen as a major driver of changes in industrial location, both between and within countries (Nishikimi [2008]). Section 3, on the other hand, will consider some possible factors affecting geographic distribution of industry in the domestic sphere. In Section 4, existing literature on industrial and firm location will be examined, and Section 5 will briefly summarize the findings and suggest some areas for future research.

Industrial deepening in East Asia

Structural transformations are an indispensable element of sustained economic growth. Within the context of East Asia, this study focuses on industrial deepening, which refers to the formation of local linkages and the creation of a robust local supplier base. To investigate the progress of industrial deepening, this study introduces two kinds of domestic procurement measures in addition to the previously developed local content measures. Specifically, two kinds of vertical specialization measures are used to demonstrate the degree to which respective East Asian economies are specialized within their vertical production networks. The results clearly show that the advancement of production networks is likely to reduce domestic procurement ratios, even if local supplier bases are strengthened in the respective countries. Moreover, the trend of domestic procurement ratios differs depending on the characteristics of particular industries and the industrial policies adopted by individual countries.

Tectonic geomorphology assessment of the Ken River catchment near Panna, Madhya Pradesh, India

This thesis focuses on tectonic geomorphology and the response of the Ken River catchment to postulated tectonic forcing along a NE-striking monocline fold in the Panna region, Madhya Pradesh, India. Peninsular India is underlain by three northeast-trending paleotopographic ridges of Precambrian Indian basement, bounded by crustal-scale faults. Of particular interest is the Pokhara lineament, a crustal scale fault that defines the eastern edge of the Faizabad ridge, a paleotopographic high cored by the Archean Bundelkhand craton. The Pokhara lineament coincides with the monocline structure developed in the Proterozoic Vindhyan Supergroup rocks along the Bundelkhand cratonic margin. A peculiar, deeply incised meander-like feature, preserved along the Ken River where it flows through the monocline, may be intimately related to the tectonic regime of this system. This thesis examines 41 longitudinal stream profiles across the length of the monocline structure to identify any tectonic signals generated from recent surface uplift above the Pokhara lineament. It also investigates the evolution of the Ken River catchment in response to the generation of the monocline fold. Digital Elevation Models (DEM) from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were used to delineate a series of tributary watersheds and extract individual stream profiles which were imported into MATLAB for analysis. Regression limits were chosen to define distinct channel segments, and knickpoints were defined at breaks between channel segments where there was a discrete change in the steepness of the channel profile. The longitudinal channel profiles exhibit the characteristics of a fluvial system in transient state. There is a significant downstream increase in normalized steepness index in the channel profiles, as well as a general increase in concavity downstream, with some channels exhibiting convex, over-steepened segments. Normalized steepness indices and uppermost knickpoint elevations are on average much higher in streams along the southwest segment of the monocline compared to streams along the northeast segment. Most channel profiles have two to three knickpoints, predominantly exhibiting slope-break morphology. These data have important implications for recent surface uplift above the Pokhara lineament. Furthermore, geomorphic features preserved along the Ken River suggest that it is an antecedent river. The incised meander-like feature appears to be the abandoned river valley of a former Ken River course that was captured during the evolution of the landscape by what is the present day Ken River.

How much did China’s WTO accession increase economic growth in resource-rich countries? CEPS Working Document No. 384, 3 October 2013

This Working Document provides an estimate of China’s impact on the growth rate of resource-rich countries since its WTO accession in December 2001. The authors’ empirical approach follows the logic of the differences-in-differences estimator. In addition to temporal variation arising from the WTO accession, which they argue was exogenous to other countries’ growth trajectories, the authors exploit spatial variation arising from differences in natural resource wealth. In this way they can compare changes in economic growth in the pre- and post-accession periods between countries that benefited from the surge in demand for industrial commodities brought about by China’s WTO accession and countries that were less able to do so. They find that that roughly one-tenth of the average annual post-accession growth in resource-rich countries was due to China’s increased appetite for commodities. The authors use this finding to inform the debate about what will happen to economic growth in resource-rich countries as China rebalances and its demand for commodities weakens.

Patterns of industrial growth. Aperçu de l'expansion industrielle, 1938-1958.

Mode of access: Internet.

Madhya Pradesh, district gazetteers.

Vol. 19 has imprint: Bhopal : District Gazetteers Dept., Madhya Pradesh.

Az ipari parkok szerepe a kínai - magyar gazdasági kapcsolatok fejlesztésében (Industrial parks in the development of Hungarian – Chinese economic relations)

A kínai-magyar gazdasági kapcsolatoktól mindenki sokat várt eddig, de viszonylag kevés növekedési hatást sikerült elérnie Magyarországnak a dinamikusan felemelkedő kínai gazdaságból. A tanulmány azt vizsgálja, hogy az ipari parkok, logisztikai bázisok terén mi teheti vonzóvá Magyarországot az EU piacát megcélzó kínai vállalatok számára, illetve milyen gazdasági lehetőségek rejlenek az ipari parkok hálózatában ahhoz, hogy a kínai növekedési dinamika valamennyire érvényesüljön a magyar gazdaságban is. / === / Most of the economic and political actors in Hungary have expected high benefits from the Chinese – Hungarian economic relations, but only moderated growth impact has been imported from the dynamic emerging Chinese economy. The study surveys the potentials of industrial parks and logistic bases whether how much they can add to the attractiveness of Hungary toward the Chinese companies targeting the single market of the EU, and what range of economic opportunities is exploitable in the network of industrial parks for having the Chinese growth dynamics to prevail particularly in the Hungarian economy.

Tectonic geomorphology assessment of the Ken River catchment near Panna, Madhya Pradesh, India

This thesis focuses on tectonic geomorphology and the response of the Ken River catchment to postulated tectonic forcing along a NE-striking monocline fold in the Panna region, Madhya Pradesh, India. Peninsular India is underlain by three northeast-trending paleotopographic ridges of Precambrian Indian basement, bounded by crustal-scale faults. Of particular interest is the Pokhara lineament, a crustal scale fault that defines the eastern edge of the Faizabad ridge, a paleotopographic high cored by the Archean Bundelkhand craton. The Pokhara lineament coincides with the monocline structure developed in the Proterozoic Vindhyan Supergroup rocks along the Bundelkhand cratonic margin. A peculiar, deeply incised meander-like feature, preserved along the Ken River where it flows through the monocline, may be intimately related to the tectonic regime of this system. This thesis examines 41 longitudinal stream profiles across the length of the monocline structure to identify any tectonic signals generated from recent surface uplift above the Pokhara lineament. It also investigates the evolution of the Ken River catchment in response to the generation of the monocline fold. Digital Elevation Models (DEM) from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were used to delineate a series of tributary watersheds and extract individual stream profiles which were imported into MATLAB for analysis. Regression limits were chosen to define distinct channel segments, and knickpoints were defined at breaks between channel segments where there was a discrete change in the steepness of the channel profile. The longitudinal channel profiles exhibit the characteristics of a fluvial system in transient state. There is a significant downstream increase in normalized steepness index in the channel profiles, as well as a general increase in concavity downstream, with some channels exhibiting convex, over-steepened segments. Normalized steepness indices and uppermost knickpoint elevations are on average much higher in streams along the southwest segment of the monocline compared to streams along the northeast segment. Most channel profiles have two to three knickpoints, predominantly exhibiting slope-break morphology. These data have important implications for recent surface uplift above the Pokhara lineament. Furthermore, geomorphic features preserved along the Ken River suggest that it is an antecedent river. The incised meander-like feature appears to be the abandoned river valley of a former Ken River course that was captured during the evolution of the landscape by what is the present day Ken River.

Exploring the potential of cassava in promoting agricultural growth in Nigeria

Cassava is one of the major food crops in Nigeria, with multiple uses from human consumption to industrial applications. This study explores the potential of cassava in Nigerian agriculture based on a review of cassava development policies; performs a trend analysis of the cultivation area, production, productivity, and real price of cassava and other competing crops for the period 1961–2013; identifies the sources of growth in production; and examines the production constraints at the local level based on a survey of 315 farmers/processors and 105 marketers from Delta State. The results revealed that several policies and programmes were implemented to develop the cassava sector with mixed outcomes. Although cassava productivity grew at 1.5% per annum (p.a.) during the post-structural adjustment programme period (1993–2013), its real price declined at a rate of 3.5% p.a. The effect of yield is the main source of growth in production, contributing 76.4% of the total growth followed by the area effect (28.2%). The cassava sector is constrained by inadequate market infrastructure, processing facilities, and lack of information and unstable prices at the local level. The widespread diffusion of improved tropical manioc selection technologies and investments in market and marketing infrastructure, processing technologies, irrigation/water provision and information dissemination are recommended to enhance the potential of the cassava sector to support agricultural growth in Nigeria.

Impaired Compensatory Beta-cell Function And Growth In Response To High-fat Diet In Ldl Receptor Knockout Mice.

In this study, we investigated the effect of low density lipoprotein receptor (LDLr) deficiency on gap junctional connexin 36 (Cx36) islet content and on the functional and growth response of pancreatic beta-cells in C57BL/6 mice fed a high-fat (HF) diet. After 60 days on regular or HF diet, the metabolic state and morphometric islet parameters of wild-type (WT) and LDLr-/- mice were assessed. HF diet-fed WT animals became obese and hypercholesterolaemic as well as hyperglycaemic, hyperinsulinaemic, glucose intolerant and insulin resistant, characterizing them as prediabetic. Also they showed a significant decrease in beta-cell secretory response to glucose. Overall, LDLr-/- mice displayed greater susceptibility to HF diet as judged by their marked cholesterolaemia, intolerance to glucose and pronounced decrease in glucose-stimulated insulin secretion. HF diet induced similarly in WT and LDLr-/- mice, a significant decrease in Cx36 beta-cell content as revealed by immunoblotting. Prediabetic WT mice displayed marked increase in beta-cell mass mainly due to beta-cell hypertrophy/replication. Nevertheless, HF diet-fed LDLr-/- mice showed no significant changes in beta-cell mass, but lower islet-duct association (neogenesis) and higher beta-cell apoptosis index were seen as compared to controls. The higher metabolic susceptibility to HF diet of LDLr-/- mice may be explained by a deficiency in insulin secretory response to glucose associated with lack of compensatory beta-cell expansion.

Industrial apiculture in the Jordan valley during Biblical times with Anatolian honeybees

Although texts and wall paintings suggest that bees were kept in the Ancient Near East for the production of precious wax and honey, archaeological evidence for beekeeping has never been found. The Biblical term ""honey"" commonly was interpreted as the sweet product of fruits, such as dates and figs. The recent discovery of unfired clay cylinders similar to traditional hives still used in the Near East at the site of Tel Rehov in the Jordan valley in northern Israel suggests that a large-scale apiary was located inside the town, dating to the 10th-early 9th centuries B.C.E. This paper reports the discovery of remains of honeybee workers, drones, pupae, and larvae inside these hives. The exceptional preservation of these remains provides unequivocal identification of the clay cylinders as the most ancient beehives yet found. Morphometric analyses indicate that these bees differ from the local subspecies Apis mellifera syriaca and from all subspecies other than A. m. anatoliaca, which presently resides in parts of Turkey. This finding suggests either that the Western honeybee subspecies distribution has undergone rapid change during the last 3,000 years or that the ancient inhabitants of Tel Rehov imported bees superior to the local bees in terms of their milder temper and improved honey yield.

Industrial challenges in grinding

This keynote paper aims at analyzing relevant industrial demands for grinding research. The chosen focus is to understand what are the main research challenges in the extensive industrial use of the process. Since the automotive applications are the most important driving forces for grinding development, the paper starts with an analysis on the main trends in more efficient engines and the changes in their components that will affect the grinding performance. A view from 23 machine tool builders is also presented based on a survey made in interviews and during the EMO and IMTS machine tool shows. Case studies received by the STC G members were used to show how research centers and industries are collaborating. A view from the authors and the final conclusions show hot topics for future grinding research. (C) 2009 CIRP.

Limiting factors for phytoplankton growth in subtropical reservoirs: the effect of light and nutrient availability in different longitudinal compartments

Limited information is available on the interactions between environmental factors and algal growth in tropical and subtropical aquatic systems. We investigated the relationships between algal biomass (measured as chlorophyll, Chl-a) and light, total phosphorus (TP) and total nitrogen (TN) in longitudinal zones of subtropical reservoirs. We studied the seasonal variation of water variables in Itupararanga Reservoir (Brazil) and compared the results with 16 other subtropical lakes and reservoirs. The longitudinal zones in Itupararanga Reservoir were considered statistically different (p 0.05, MANOVA). From the riverine zone to the dam region of the reservoir, Spearman Correlation Test suggested that light limitation and TP limitation tended to decrease and increase, respectively. Although nitrate concentrations were high (400 g/L), the Spearman coefficients between Chl-a and TN and the TN:TP ratios (11:1 TN:TP 35:1) indicated that nitrogen may be co-limiting algal growth in the studied water body. Putting Itupararanga in a regional context allowed assessment of potential influences of land use on trophic state. Within the subtropical dataset, TP explained a greater percentage of variance in Chl-a (R2 = 0.70) than TN (R2 = 0.17). The main land use type within the reservoirs drainage area significantly influenced the concentrations of TP, TN, and Chl-a (p 0.05, MANOVA), with different relationships between nutrients and chlorophyll in forested (R2 = 0.12-0.33), agricultural (R2 = 0.50-0.68) and urban (R2 = 0.09-0.64) watersheds. Comparisons with literature values and those from reservoirs with less altered watersheds indicated that Itupararanga Reservoir is reaching the mesotrophic-eutrophic boundary, and further nutrient enrichment could cause water quality degradation.

On the finite element modeling of fatigue crack growth in pressurized cylindrical shells

A methodology for the computational modeling of the fatigue crack growth in pressurized shell structures, based on the finite element method and concepts of Linear Elastic Fracture Mechanics, is presented. This methodology is based on that developed by Potyondy [Potyondy D, Wawrzynek PA, Ingraffea, AR. Discrete crack growth analysis methodology for through crack in pressurized fuselage structures. Int J Numer Methods Eng 1995;38:1633-1644], which consists of using four stress intensity factors, computed from the modified crack integral method, to predict the fatigue propagation life as well as the crack trajectory, which is computed as part of the numerical simulation. Some issues not presented in the study of Potyondy are investigated herein such as the influence of the crack increment size and the number of nodes per element (4 or 9 nodes) on the simulation results by means of a fatigue crack propagation simulation of a Boeing 737 airplane fuselage. The results of this simulation are compared with experimental results and those obtained by Potyondy [1]. (C) 2008 Elsevier Ltd. All rights reserved.