Otimização da operação de sistemas de distribuição radiais usando um algoritmo genético especializado

Pós-graduação em Engenharia Elétrica - FEIS

Verificação de pilares metálicos compostos constituídos por perfis formados a frio por meio de programa computacional

In this work, we discuss the procedures adopted for the design of built-up columns (laced and battened columns). Built-up columns are widely used in steel construction generally when the compression forces are relatively low and the column buckling lengths are large. They are commonly used in industrial buildings, for example, as posts for cladding, or as columns supporting a crane girder. Unlike columns with full section, in the case of built-up columns, it is necessary to evaluate the shear stiffness. In fact, the shear strength leads to a significant reduction of the critical load. In the context of this work, the components of the columns (chords, diagonals, posts, etc.) are formed by cold-formed members. In order to systematize and rationalize the verification of the built-up columns, this work aim to develop a computer program based on the standards NBR 14762, NBR 6355 and Eurocode 3, basically the considerations of the part EN 1993-1-1

Verificação de pilares metálicos compostos constituídos por perfis formados a frio por meio de programa computacional

In this work, we discuss the procedures adopted for the design of built-up columns (laced and battened columns). Built-up columns are widely used in steel construction generally when the compression forces are relatively low and the column buckling lengths are large. They are commonly used in industrial buildings, for example, as posts for cladding, or as columns supporting a crane girder. Unlike columns with full section, in the case of built-up columns, it is necessary to evaluate the shear stiffness. In fact, the shear strength leads to a significant reduction of the critical load. In the context of this work, the components of the columns (chords, diagonals, posts, etc.) are formed by cold-formed members. In order to systematize and rationalize the verification of the built-up columns, this work aim to develop a computer program based on the standards NBR 14762, NBR 6355 and Eurocode 3, basically the considerations of the part EN 1993-1-1

Sulla ricerca del minimo dei consumi per vetture sportive

La ricerca oggetto di questa tesi, come si evince dal titolo stesso, è volta alla riduzione dei consumi per vetture a forte carattere sportivo ed elevate prestazioni specifiche. In particolare, tutte le attività descritte fanno riferimento ad un ben definito modello di vettura, ovvero la Maserati Quattroporte. Lo scenario all’interno del quale questo lavoro si inquadra, è quello di una forte spinta alla riduzione dei cosiddetti gas serra, ossia dell’anidride carbonica, in linea con quelle che sono le disposizioni dettate dal protocollo di Kyoto. La necessità di ridurre l’immissione in atmosfera di CO2 sta condizionando tutti i settori della società: dal riscaldamento degli edifici privati a quello degli stabilimenti industriali, dalla generazione di energia ai processi produttivi in senso lato. Nell’ambito di questo panorama, chiaramente, sono chiamati ad uno sforzo considerevole i costruttori di automobili, alle quali è imputata una percentuale considerevole dell’anidride carbonica prodotta ogni giorno e riversata nell’atmosfera. Al delicato problema inquinamento ne va aggiunto uno forse ancor più contingente e diretto, legato a ragioni di carattere economico. I combustibili fossili, come tutti sanno, sono una fonte di energia non rinnovabile, la cui disponibilità è legata a giacimenti situati in opportune zone del pianeta e non inesauribili. Per di più, la situazione socio politica che il medio oriente sta affrontando, unita alla crescente domanda da parte di quei paesi in cui il processo di industrializzazione è partito da poco a ritmi vertiginosi, hanno letteralmente fatto lievitare il prezzo del petrolio. A causa di ciò, avere una vettura efficiente in senso lato e, quindi, a ridotti consumi, è a tutti gli effetti un contenuto di prodotto apprezzato dal punto di vista del marketing, anche per i segmenti vettura più alti. Nell’ambito di questa ricerca il problema dei consumi è stato affrontato come una conseguenza del comportamento globale della vettura in termini di efficienza, valutando il miglior compromesso fra le diverse aree funzionali costituenti il veicolo. Una parte consistente del lavoro è stata dedicata alla messa a punto di un modello di calcolo, attraverso il quale eseguire una serie di analisi di sensibilità sull’influenza dei diversi parametri vettura sul consumo complessivo di carburante. Sulla base di tali indicazioni, è stata proposta una modifica dei rapporti del cambio elettro-attuato con lo scopo di ottimizzare il compromesso tra consumi e prestazioni, senza inficiare considerevolmente queste ultime. La soluzione proposta è stata effettivamente realizzata e provata su vettura, dando la possibilità di verificare i risultati ed operare un’approfondita attività di correlazione del modello di calcolo per i consumi. Il beneficio ottenuto in termini di autonomia è stato decisamente significativo con riferimento sia ai cicli di omologazione europei, che a quelli statunitensi. Sono state inoltre analizzate le ripercussioni dal punto di vista delle prestazioni ed anche in questo caso i numerosi dati rilevati hanno permesso di migliorare il livello di correlazione del modello di simulazione per le prestazioni. La vettura con la nuova rapportatura proposta è stata poi confrontata con un prototipo di Maserati Quattroporte avente cambio automatico e convertitore di coppia. Questa ulteriore attività ha permesso di valutare il differente comportamento tra le due soluzioni, sia in termini di consumo istantaneo, che di consumo complessivo rilevato durante le principali missioni su banco a rulli previste dalle normative. L’ultima sezione del lavoro è stata dedicata alla valutazione dell’efficienza energetica del sistema vettura, intesa come resistenza all’avanzamento incontrata durante il moto ad una determinata velocità. Sono state indagate sperimentalmente le curve di “coast down” della Quattroporte e di alcune concorrenti e sono stati proposti degli interventi volti alla riduzione del coefficiente di penetrazione aerodinamica, pur con il vincolo di non alterare lo stile vettura.

Numerical simulations of magma chamber dynamics at Campi Flegrei, and associated seismicity, deformation and gravity changes

Understanding the complex relationships between quantities measured by volcanic monitoring network and shallow magma processes is a crucial headway for the comprehension of volcanic processes and a more realistic evaluation of the associated hazard. This question is very relevant at Campi Flegrei, a volcanic quiescent caldera immediately north-west of Napoli (Italy). The system activity shows a high fumarole release and periodic ground slow movement (bradyseism) with high seismicity. This activity, with the high people density and the presence of military and industrial buildings, makes Campi Flegrei one of the areas with higher volcanic hazard in the world. In such a context my thesis has been focused on magma dynamics due to the refilling of shallow magma chambers, and on the geophysical signals detectable by seismic, deformative and gravimetric monitoring networks that are associated with this phenomenologies. Indeed, the refilling of magma chambers is a process frequently occurring just before a volcanic eruption; therefore, the faculty of identifying this dynamics by means of recorded signal analysis is important to evaluate the short term volcanic hazard. The space-time evolution of dynamics due to injection of new magma in the magma chamber has been studied performing numerical simulations with, and implementing additional features in, the code GALES (Longo et al., 2006), recently developed and still on the upgrade at the Istituto Nazionale di Geofisica e Vulcanologia in Pisa (Italy). GALES is a finite element code based on a physico-mathematical two dimensional, transient model able to treat fluids as multiphase homogeneous mixtures, compressible to incompressible. The fundamental equations of mass, momentum and energy balance are discretised both in time and space using the Galerkin Least-Squares and discontinuity-capturing stabilisation technique. The physical properties of the mixture are computed as a function of local conditions of magma composition, pressure and temperature.The model features enable to study a broad range of phenomenologies characterizing pre and sin-eruptive magma dynamics in a wide domain from the volcanic crater to deep magma feeding zones. The study of displacement field associated with the simulated fluid dynamics has been carried out with a numerical code developed by the Geophysical group at the University College Dublin (O’Brien and Bean, 2004b), with whom we started a very profitable collaboration. In this code, the seismic wave propagation in heterogeneous media with free surface (e.g. the Earth’s surface) is simulated using a discrete elastic lattice where particle interactions are controlled by the Hooke’s law. This method allows to consider medium heterogeneities and complex topography. The initial and boundary conditions for the simulations have been defined within a coordinate project (INGV-DPC 2004-06 V3_2 “Research on active volcanoes, precursors, scenarios, hazard and risk - Campi Flegrei”), to which this thesis contributes, and many researchers experienced on Campi Flegrei in volcanological, seismic, petrological, geochemical fields, etc. collaborate. Numerical simulations of magma and rock dynamis have been coupled as described in the thesis. The first part of the thesis consists of a parametric study aimed at understanding the eect of the presence in magma of carbon dioxide in magma in the convection dynamics. Indeed, the presence of this volatile was relevant in many Campi Flegrei eruptions, including some eruptions commonly considered as reference for a future activity of this volcano. A set of simulations considering an elliptical magma chamber, compositionally uniform, refilled from below by a magma with volatile content equal or dierent from that of the resident magma has been performed. To do this, a multicomponent non-ideal magma saturation model (Papale et al., 2006) that considers the simultaneous presence of CO2 and H2O, has been implemented in GALES. Results show that the presence of CO2 in the incoming magma increases its buoyancy force promoting convection ad mixing. The simulated dynamics produce pressure transients with frequency and amplitude in the sensitivity range of modern geophysical monitoring networks such as the one installed at Campi Flegrei . In the second part, simulations more related with the Campi Flegrei volcanic system have been performed. The simulated system has been defined on the basis of conditions consistent with the bulk of knowledge of Campi Flegrei and in particular of the Agnano-Monte Spina eruption (4100 B.P.), commonly considered as reference for a future high intensity eruption in this area. The magmatic system has been modelled as a long dyke refilling a small shallow magma chamber; magmas with trachytic and phonolitic composition and variable volatile content of H2O and CO2 have been considered. The simulations have been carried out changing the condition of magma injection, the system configuration (magma chamber geometry, dyke size) and the resident and refilling magma composition and volatile content, in order to study the influence of these factors on the simulated dynamics. Simulation results allow to follow each step of the gas-rich magma ascent in the denser magma, highlighting the details of magma convection and mixing. In particular, the presence of more CO2 in the deep magma results in more ecient and faster dynamics. Through this simulations the variation of the gravimetric field has been determined. Afterward, the space-time distribution of stress resulting from numerical simulations have been used as boundary conditions for the simulations of the displacement field imposed by the magmatic dynamics on rocks. The properties of the simulated domain (rock density, P and S wave velocities) have been based on data from literature on active and passive tomographic experiments, obtained through a collaboration with A. Zollo at the Dept. of Physics of the Federici II Univeristy in Napoli. The elasto-dynamics simulations allow to determine the variations of the space-time distribution of deformation and the seismic signal associated with the studied magmatic dynamics. In particular, results show that these dynamics induce deformations similar to those measured at Campi Flegrei and seismic signals with energies concentrated on the typical frequency bands observed in volcanic areas. The present work shows that an approach based on the solution of equations describing the physics of processes within a magmatic fluid and the surrounding rock system is able to recognise and describe the relationships between geophysical signals detectable on the surface and deep magma dynamics. Therefore, the results suggest that the combined study of geophysical data and informations from numerical simulations can allow in a near future a more ecient evaluation of the short term volcanic hazard.

Estudio de las propiedades de las fábricas históricas de adobe como soporte a intervenciones de rehabilitación

El extenso legado edificado que constituyen las construcciones históricas de fábrica de adobe distribuidas por toda la península encuentra en la región de Aveiro (Portugal) su máxima expresión, tanto desde el punto de vista cuantitativo, un 30% de los edificios existentes en la región, como tipológico, compuesto por un amplio conjunto de diferentes construcciones (edificios residenciales, edificios militares, iglesias, escuelas, teatros, naves industriales, etc.), muchos de los cuales de reconocido valor histórico, arquitectónico y patrimonial. Tras la gradual desaparición del empleo de la fábrica de adobe como técnica constructiva, durante la segunda mitad del siglo XX, la necesaria conservación y/o rehabilitación de los edificios remanentes no se ha tenido en cuenta. Como consecuencia de esta actitud generalizada de pasividad continuada, se verifica el estado actual de deterioro y de daño acusado que presentan una gran parte de estas construcciones, del cual ha resultado el panorama presente de abandono y ruina en el que se encuentran muchas de ellas. Por regla general, la solución adoptada para afrontar el estado actual de los edificios en estas condiciones suele ser la demolición. No obstante lo anterior, en los últimos años, se viene produciendo en el seno de los diferentes agentes que intervienen en la toma de decisiones sobre estos edificios un interés creciente en su preservación, promoviendo la rehabilitación de los mismos. Empieza de este modo a cobrar importancia la necesidad de desarrollar estrategias de intervención que posibiliten alargar la vida útil de estas estructuras, permitiendo, por un lado, establecer metodologías de análisis de sus condiciones de seguridad, que posibiliten determinar las medidas de actuación necesarias para el aseguramiento de las mismas frente a las acciones existentes y, en su caso, a la incorporación de nuevas solicitaciones debidas a cambios de uso o ampliaciones, así como, dando respuesta a los principales mecanismo de daño a los que se encuentran sujetas. Tratándose de estructuras que fueron construidas utilizando técnicas y materiales escasamente estudiados y entre tanto abandonados, se hace también necesario, y con carácter previo a lo anterior, acometer un estudio e investigación multidisciplinares que permitan su caracterización y comprensión, y la par establecer un diagnóstico sobre los principales agentes y procesos patológicos que promueven el deterioro de las mismas. En este contexto, el estudio llevado a cabo tuvo como objetivos ampliar el conocimiento e investigación acerca de las propiedades y parámetros resistentes de las fábricas históricas de adobe, así como, analizar los principales mecanismos de daño asociados a las mismas, a la luz del el estado actual de estas construcciones, y su repercusión en el comportamiento resistente de las fábricas –con especial énfasis para la influencia del agua–. De este modo, se pretendió construir una base de resultados que, por un lado, pueda servir de soporte a intervenciones de rehabilitación y/o consolidación de estas estructuras – permitiendo de forma ágil y a partir de datos y recursos de cálculo expeditos la evaluación de los niveles de seguridad en las fábricas–, y por otro, el estudio de soluciones de mejora o corrección de deficiencias en su comportamiento estructural. The vast edified legacy composed of the historical adobe load-bearing walls which can be found spread all over the Iberian peninsula has, in the region of Aveiro (Portugal), its maximum expression, both from a quantitative point of view (around 30% of the local construction) and a typological point of view, including a considerable number of different types of constructions (residential buildings, military buildings, churches, industrial buildings, etc.), most of which have a recognized high historical, architectural and patrimonial value. The conservation and/or rehabilitation of many of these edifications has been neglected, since its gradual abandonment as constructive technique during the second half of the 20th century. As a consequence of this posture of general passivity, it is nowadays visible the state of pronounced damage manifested by great part of these constructions, which has been leading to their abandonment and state of ruin. In most cases, the option for demolition has been the solution found to face the actual state of these constructions. However, in recent years, a growing interest in the preservation and maintenance of the adobe constructions has become visible by the envolved parties, with the obvious consequence of rehabilitation. By so, it becomes mandatory to develop strategies of intervention that, through rehabilitation, are able to extend the useful life of the existing structures, allowing on one hand, to establish methodologies to analyze their safety state and determine the actions needed to ensure their protection against existing pressures and, when applicable, the occurrence of new demands due to changes of use or extensions, and on the other hand, to give response to the main damage mechanisms to which these structures are exposed. Because these structures were built using not very well know techniques and materials, which have been, in the meantime, abandoned, it is now crucial that these are object of a previous phase of study and multidisciplinary investigation, essential not only to their characterization and comprehension, but also to the diagnosis of the main pathological processes that affect them. In this context, the present study had as main goal to develop the analysis and knowledge regarding the properties and resistant parameters of the adobe masonry as well as bringing to the light of day the actual state of the existing adobe constructions, making evident the main damage mechanisms by which they are affected and analyzing, through their occurrence, the vulnerability of the mentioned properties and resistant parameters. By so, it was objective of the present study the development of a result database which on one hand, supports the execution of rehabilitation interventions and/or strengthening of these constructions and, on other hand, allows the development of improvement solutions in the mechanical characteristics of the adobe masonry which permit corrections of deficiencies in their structural behavior with a special emphasis on the influence of water. Thus, a database of results was developed. Its goal is, on one hand, to support the rehabilitation or consolidation interventions on these structures - allowing for a quick analysis of the safety state of the adobe walls from expedite data and calculus resources and, on the other hand, to study improvement or correction solutions of their structural behavior.

Idoneidad del grado de rigidez de las uniones en pórticos metálicos de naves a dos aguas en edificación agroindustrial

Para el análisis de la respuesta estructural, tradicionalmente se ha partido de la suposición de que los nudos son totalmente rígidos o articulados. Este criterio facilita en gran medida los cálculos, pero no deja de ser una idealización del comportamiento real de las uniones. Como es lógico, entre los nudos totalmente rígidos y los nudos articulados existe una gama infinita de valores de rigidez que podrían ser adoptados. A las uniones que presentan un valor distinto de los canónicos se les denomina en sentido general uniones semirrígidas. La consideración de esta rigidez intermedia complica considerablemente los cálculos estructurales, no obstante provoca cambios en el reparto de esfuerzos dentro de la estructura, así como en la configuración de las propias uniones, que en ciertas circunstancias pueden suponer una ventaja económica. Del planteamiento expuesto en el párrafo anterior, surgen dos cuestiones que serán el germen de la tesis. Estas son: ¿Qué ocurre si se aplica el concepto de uniones semirrígidas a las naves industriales? ¿Existen unos valores determinados de rigidez en sus nudos con los que se logra optimizar la estructura? Así, surge el objetivo principal de la tesis, que no es otro que conocer la influencia de la rigidez de los nudos en los costes de los pórticos a dos aguas de estructura metálica utilizados típicamente en edificios de uso agroindustrial. Para alcanzar el objetivo propuesto, se plantea una metodología de trabajo que básicamente consiste en el estudio de una muestra representativa de pórticos sometidos a tres estados de carga: bajo, medio y alto. Su rango de luces abarca desde los 8 a los 20 m y el de la altura de pilares desde los 3,5 a los 10 m. Además, se considera que sus uniones pueden adoptar valores intermedios de rigidez. De la combinatoria de las diferentes configuraciones posibles se obtienen 46.656 casos que serán objeto de estudio. Debido al fin economicista del trabajo, se ha prestado especial atención a la obtención de los costes de ejecución de las diferentes partidas que componen la estructura, incluidas las correspondientes a las uniones. Para acometer los cálculos estructurales ha sido imprescindible contar con un soporte informático, tanto existente como de creación ex profeso, que permitiese su automatización en un contexto de optimización. Los resultados del estudio consisten básicamente en una cantidad importante de datos que para su interpretación se hace imprescindible tratarlos previamente. Este tratamiento se fundamenta en su ordenación sistemática, en la aplicación de técnicas estadísticas y en la representación gráfica. Con esto se obtiene un catálogo de gráficos en los que se representa el coste total de la estructura según los diferentes valores de rigidez de sus nudos, unas matrices resumen de resultados y unos modelos matemáticos que representan la función coste total - rigideces de nudos. Como conclusiones se puede destacar: por un lado que los costes totales de los pórticos estudiados son mínimos cuando los valores de rigidez de sus uniones son bajos, concretamente de 5•10³ a 10•10³ kN•m/rad; y por otro que la utilización en estas estructuras de uniones semirrígidas con una combinación idónea de sus rigideces, supone una ventaja económica media del 18% con respecto a las dos tipologías que normalmente se usan en este tipo de edificaciones como son los pórticos biempotrados y los biarticulados. ABSTRACT Analyzing for structural response, traditionally it started from the assumption that joints are fully rigid or pinned. This criterion makes the design significantly easier, but it is also an idealization of real joint behaviour. As is to be expected, there is an almost endless range of stiffnes value between fully rigid and pinned joints, wich could be adopted. Joints with a value other than traditional are referred to generally as semi-rigid joints. If middle stiffness is considered, the structural design becomes much more complicated, however, it causes changes in the distribution of frame stresses, as well as on joints configuration, that under certain circumstances they may suppose an economic advantage. Two questions arise from the approach outlined in the preceding subparagraph, wich are the seeds of the doctoral thesis. These are: what happens when the concept of semirigid joints is applied to industrial buildings? There are certain stiffness values in their joints with which optimization of frame is achieved? This way, the main objective of the thesis arise, which is to know the influence of stiffness of joints in the cost of the steel frames with gabled roof, that they are typically used in industrial buildings. In order to achieve the proposed goal, a work methodology is proposed, which consists in essence in a study of a representative sample of frames under three load conditions: low, middle and high. Their range of spans comprises from 8 to 20 m and range of the height of columns cover from 3,5 to 10 m. Furthermore, it is considered that their joints can adopt intermediate values of stiffness. The result of the combination of different configurations options is 46.656 cases, which will be subject of study. Due to the economic aim of this work, a particular focus has been devoted for obtaining the execution cost of the different budget items that make up the structure, including those relating to joints. In order to do the structural calculations, count with a computing support has been indispensable, existing and created expressly for this purpose, which would allows its automation in a optimization context. The results of the study basically consist in a important amount of data, whose previous processing is necesary. This process is based on his systematic arrangement, in implementation of statistical techniques and in graphical representation. This give a catalogue of graphics, which depicts the whole cost of structure according to the different stiffness of its joints, a matrixes with the summary of results and a mathematical models which represent the function whole cost - stiffness of the joints. The most remarkable conclusions are: whole costs of the frames studied are minimum when the stiffness values of their joints are low, specifically 5•10³ a 10•10³ kN•m/rad; and the use of structures with semi-rigid joints and a suitable combination of their stiffness implyes an average economic advantage of 18% over other two typologies which are used typically in this kind of buildings; these are the rigid and bi-articulated frames.

Aproximación a la arquitectura popular en la Mancha Baja. El caso de Manzanares

La tesis se compone de una primera parte introductoria, en la que se recogen las distintas opiniones y definiciones de la arquitectura “popular”, el estado de la cuestión, comentando los artículos y publicaciones realizados sobre la Mancha. La segunda parte profundiza en aspectos generales previos al análisis edificatorio central de la tesis, con los siguientes capítulos: -Estudio de los condicionantes físicos, históricos, socio-económicos y culturales de la comarca de la Mancha Baja. Acotando el territorio. -Una visión general sobre la arquitectura tradicional de la provincia de Ciudad Real, por comarcas. -Un estudio de las distintas tipologías edificatorias tradicionales, con ejemplos en la comarca manchega. -El análisis de materiales constructivos, elementos y sistemas utilizados en las construcciones tradicionales en la Mancha Baja. La tercera parte, desde la premisa de la representación gráfica, apoyado en un anexo con dibujos de ciento treinta y siete edificios populares de Manzanares y comarca, estudia: El trazado urbano y las casas de Manzanares; desde los levantamientos de plantas, alzados y secciones, emplazamiento en la manzana y fotografías, se realiza una descripción completa, con noventa y seis ejemplos. Además de llegar a las conclusiones derivadas del análisis de estas edificaciones, los objetivos pretendidos con este estudio serían también: Realizar un primer trabajo aproximativo, desde la visión arquitectónica, de la arquitectura tradicional manchega. Recopilar toda la información existente que pueda relacionarse con la arquitectura popular en la comarca, y citar los escritos y publicaciones de referencia para posteriores estudios. Se estudia la geomorfología, el clima, el territorio, la economía, la sociología, etc…, para obtener una información clave, además de los materiales, técnicas constructivas y morfología de las edificaciones. Se destaca el apartado de los edificios preindustriales tradicionales, como molinos de viento, de agua, palomares, pósitos y bodegas con el análisis de varios ejemplos, por su importante presencia en las poblaciones. Por último se desarrolla un amplio bloque sobre bibliografía de arquitectura popular, la consultada y la general. La arquitectura popular de la mancha baja es tapial cubierto de teja árabe, cerrada al exterior, pero abierta a grandes patios, de planta baja y cámaras altas, con elementos auxiliares de protección y acceso, que revisten la aparente simplicidad volumétrica de estos complejos, viviendas-almacén. Con un complejo programa tanto agrícola como doméstico. De gran protección frente al clima, con escasa decoración, esquemas espaciales primitivos y con mayor envergadura estructural en las dependencias agropecuarias. Una arquitectura que mezcla el uso doméstico y el productivo, pero que al evolucionar aumenta su diferenciación. Edificios que mantienen las mismas cualidades estéticas, repitiendo formas y volúmenes, pero de peculiares configuraciones espaciales, se repiten los materiales y técnicas constructivas, así como elementos arquitectónicos con pocas variaciones, pero no existen dos conjuntos similares. No podemos utilizar un ejemplo como modelo de casa manchega. Evoluciona de la casa bloque, básica y primitiva, con ejemplos escasos en las poblaciones más deprimidas, a la casa compleja, donde se separan con claridad las dependencias agropecuarias de las vivideras. Evoluciona de una casa rural, con los mismos esquemas, ya se ubique en el campo o en núcleos de población, a la casa urbana, entre medianerías, en la que se puede encontrar una transformación paralela, desarrollándose programas domésticos, más especializados, mezclados con arquitecturas cultas, con programas que reflejan las nuevas necesidades de la sociedad urbana del siglo XX. ABSTRACT The thesis is composed of a first part that is collected as introducing different views and definitions of popular architecture, the state of affairs, commenting on articles and publications carried out at the Mancha. The second part explores general issues before the main urban analysis of the thesis, with the following chapters: -A study of the geographic, historical, socio-economic and cultural conditions of the region of the Mancha Baja. Delimiting the territory -A tour with an overview of the province of Ciudad Real by regions. -A study of the different traditional building types, with examples in the region from the Mancha. -The Analysis of building materials, components and systems used in traditional buildings in the Mancha Lower The third part studies from the premise of the drawing: The urban planning of the towns to study and houses of Manzanares, from the execution of plans, elevations and sections, sites in the blocks, old photographs, a full description is made, covering a wide range of examples, highlighting the “evolution during the twentieth century, in its last quarter, buildings of popular character “, which is the ultimate aim of the thesis. In addition to reaching the conclusions drawn from the analysis cards of these buildings, the objectives pursued with this study would be also: This paper is the realization of a first rough work from the architectural vision of traditional architecture from the Mancha. To Search a work method for approaching the popular architecture, other than those made so far by other studies of historians, engineers and sociologists, with the graphical representation and the buildings would be studied like living organisms that evolve over time. To collect all the current information that It can be able to connect itself with the popular architecture in the region, and cite the writings and publications of reference for future studies. Geomorphology, climate, topography of the place is studied to obtain a key information about materials, construction techniques and morphology of the buildings. A section is opened to study the case of traditional industrial buildings like windmills, flour mill, pigeon lofts, public granary, threshing floor and cellars with the analysis of several examples; its importance is highlighted in the urban plan of the town. Finally a large block of popular literature on architecture is developed, consulted for work is distinct from the general existing on the subject. The popular architecture from the Mancha is built of rammed earth and roofs inclined of Arabic tiles, the buildings are closed to the outside, but they are open around large courtyards, and ground floor and camera high, with additional elements of protection, they are opened to patios. The manor has a complex program on agricultural and domestic activity. Large climate protection, poor decoration, quite primitive in shaping living spaces, and more structural scale in storage and processing units of agriculture-related products, mainly wine, cereal and to a lesser extent oil. These architecture combines the domestic and productive use, but which will evolve and they are distinguishing, both enclosed spaces such as courtyards. The buildings keep the same aesthetic qualities because they repeat shapes and volumes, but they maintain their spatial configuration individually; the materials, building techniques and architectural elements are repeated with slight variations, but there aren´t two identical houses. This architecture evolved from the block, basic and primitive house, with few examples in the most deprived towns, to the complex house, where agricultural units are clearly separated of domestic rooms. It developed from a country house (with the same patterns) whether it is located in the countryside or in the towns, to an urban house, in which we can find a parallel transformation, developing domestic programs, more specialized, mixed with cultivated architectures, with programs that reflect the changing needs of urban society of the twentieth century.

Espacios máximos con recursos mínimos : edificio Central Lechera CLESA, Alejandro de la Sota

La tesis aborda el estudio de la Central lechera CLESA, uno de los edificios industriales de Alejandro de la Sota más significativos de la década de los años cincuenta en España. Las centrales lecheras fueron abordadas por Sota en distintas ocasiones entre 1955 y 1969, siendo CLESA la única de todas ellas que llega a construirse. Se trata de uno de los exponentes más brillantes de la arquitectura moderna industrial española de la posguerra, incluido en "La arquitectura de la industria, REGISTRO DOCOMOMO IBÉRICO”1 entre la veintena de edificios seleccionados de la arquitectura madrileña de este periodo. Plantea una solución singular para alcanzar la diafanidad exigida en la implantación del proceso de producción. La estructura de las naves se realiza con hormigón pretensado, siendo uno de los pioneros en la utilización de esta técnica. La hipótesis de partida considera la realidad del proyecto construido como respuesta desde la arquitectura a un programa industrial resuelto con sencillez, que partiendo de una economía de recursos que le es inherente, consigue desde la coherencia del planteamiento, soluciones donde la complejidad espacial constituye una respuesta eficaz y del máximo interés. Los objetivos de esta tesis son contribuir a un conocimiento riguroso del edificio, que permita descubrir la particularidad de su entramado espacial y el interés de las soluciones adoptadas en su configuración final, en aras de contrastar su calidad arquitectónica. El edificio de la Central Lechera CLESA, si bien es un edificio muy conocido, lo es de una manera superficial. Aparece en numerosas publicaciones, en muchas ocasiones formando parte de un relato extenso de la obra de su autor. El libro monográfico publicado en 2007 por la Fundación Alejandro de la Sota, cuya edición está a cargo de Teresa Couceiro, es la única publicación específica sobre él. Tras una breve introducción, en la que se destaca la intensa dedicación de Sota a esta obra, reúne una colección de planos, fotografías y croquis, junto a la memoria del proyecto. Ofrece una visión fragmentada, que permite vislumbrar el interés de esta obra, pero no facilita comprenderla en su integridad. Es importante destacar la publicación de CLESA en el libro editado por Pronaos (1989), que incluye una selección, realizada por el autor, de plantas, alzados y secciones que corresponden al proyecto construido junto a fotografías de la obra terminada, además de un breve texto tan conciso como esclarecedor. Sobre Alejandro de la Sota se han escrito, tesis doctorales, numerosos artículos, varios libros así como realizado exposiciones que recogen su obra global, reflejados en este documento en las consiguientes bibliografías específicas. Cabe destacar la exposición realizada en la sede del COAM en 2014, con ocasión de su centenario, que el edificio CLESA protagoniza en cierto modo, por su riesgo de desaparición.2 La tesis se estructura en cuatro capítulos: descripción, análisis, síntesis y conclusiones. El primer capítulo contempla la descripción del edificio objeto de la tesis, con una introducción que nos sitúa en el contexto histórico, económico, cultural y social en el que se desarrolla el encargo, proyecto y obra de la central lechera. La descripción propiamente dicha del conjunto industrial, partiendo del encargo de la central lechera al autor del proyecto, pasando por el anteproyecto, el proyecto visado y llegando a la obra realizada. Se compara el proyecto visado, la obra terminada y la CLESA publicada, así como el devenir del edificio. La segunda parte corresponde al análisis, en primer lugar desde el programa como planteamiento general, estudiando las circulaciones, relaciones espaciales, geométricas, esqueléticas, geográficas -parte a parte- que integran el conjunto de la central. La estructura, introducción explicativa de las soluciones adoptadas por Alejandro de la Sota; análisis del sistema esquelético del edificio por partes, operaciones geométricas y espaciales. Construcción, análisis de la materialización de la obra, sistemas constructivos empleados en cerramientos, cubiertas, lucernarios; de lo general a lo particular, estudiando los sistemas. Finalmente a través de la pequeña escala se compendian elementos singulares que forman parte de sistemas complejos, como las múltiples escaleras, barandillas, carpinterías, miradores. Se recapitula en una síntesis que configura un todo con la suma de las partes, mediante la utilización de recursos de enlace de esa arquitectura aditiva, como es el módulo, los recorridos y los enlaces visuales. El capítulo final de Conclusiones contrasta la hipótesis de partida de la tesis en cuanto a una arquitectura de espacios máximos con recursos mínimos. Recoge también diversas reflexiones como la dialéctica entre el espacio fragmentado y el espacio único; crecimiento expansivo o inclusivo; imagen singular y representación; escala doméstica y escala industrial; renuncias estructurales o limitaciones de medios. Quizás, el mayor interés de esta tesis reside los dibujos realizados en axonométrica del complejo CLESA, que han permitido restituir y reconstruir idealmente la fábrica al inicio de su actividad. Teniendo en cuenta su posible desaparición total o parcial, esta restitución cobra relevancia como testimonio de lo que fue. ABSTRACT The thesis deals with the study of CLESA's Dairy Plant, one of the most significant industrial buildings of the Decade of the fifties in Spain, by Alejandro de la Sota. The Dairies were addressed by Sota at various occasions between 1955 and 1969, being the CLESA plant the only one that is has been built. This is one of the most brilliant exponents of Spanish industrial post-war modern architecture, included in "The architecture industry, IBERIAN DOCOMOMO RECORD"3 between the score of selected buildings of Madrid architecture of this period. It poses a singular solution to achieve the openness of the space required in the implementation of the manufacturing process. The structure of the nave is done with prestressed concrete, being one of the pioneers in the use of this technique. The initial hypothesis considers the reality of the project built from the architecture in response to an industrial program solved with simplicity, that from a resource economy that is inherent, gets from the consistency of the approach, solutions where the space complexity is an effective response of great interest. The objectives of this thesis are to contribute to a rigorous knowledge of the building, which allows to discover the particularity of its space lattice and the interest of the solutions adopted in its final configuration, in order to contrast its architectural quality. The building of the Central Lechera CLESA, despite it is a well known building, is in a superficial way. It appears in several publications, often as part of an extensive account of the work of its author. The monograph published in 2007 by the Foundation Alejandro de la Sota, whose edition is run by Teresa Couceiro, is the only specific publication about it. After a brief introduction, in which Sota's intense dedication to this work stands out, it brings together a collection of drawings, photographs and sketches, along with the project report. It offers a fragmented view, which enable to glimpse the interest of this work, but not helps to understand it in full. It is important to highlight the publication of CLESA in the book edited by Pronaos (1989), which includes a selection made by the author of plants, elevations and sections corresponding to the project built, next to photographs of the finished construction, in addition to a brief text as concise as enlightening. About Alejandro de la Sota have been written doctoral thesis, numerous articles, several books as well as held exhibitions collecting his global work, which have been reflected in this document in the resulting specific bibliographies. It should be noted the exhibition in COAM headquarters in 2014, on the occasion of its Centennial, where the building CLESA has a leading role, in a certain way, because of its risk of disappearance.4 The thesis is structured in four chapters: description, analysis, synthesis, and conclusions. The first chapter provides the description of the building object of this thesis. Includes an introduction that puts us in the historic, economic, cultural and social context in which it is developed the commission, the project and construction of the dairy building. The description itself of the industrial complex, starts with the order of the dairy to the author of the project, moves through the draft, the visa project and reaches the completion of the work. The visa project, CLESA's finished and published work, as well as the future of the building is compared. The second part corresponds to the analysis, first from the program as a general approach, studying the circulations, geometric, spatial, skeletal, geographical relations - bit by bit - comprising the manufacturing plant ("la central"). The structure, explanatory introduction of the solutions adopted by Alejandro de la Sota; analysis of the skeletal system of the building by parts, geometric and spatial operations. Construction, analysis of the realization of the work, constructive systems used in the building enclosures, roofs, skylights; from the general to the particular and studying the systems. Finally through small scale unique elements that are part of complex systems, such as multiple stairs, railings, carpentry, viewpoints are summarized. It is recapitulated in a synthesis which forms a whole with the sum of the parts, using linking resources that belongs to the additive architecture, such as the module, tours and visual links The final chapter of Conclusions contrast the hypothesis of the thesis regarding the maximum space architecture with minimal resources. It also includes various reflections as the dialectic between the fragmented space and the single space; expansive or inclusive growth; unique image and representation; domestic and industrial scale; structural abandonment or limitation of means. Perhaps the greatest interest of this thesis lies in the axonometric drawings made of the CLESA complex, which ideally have allowed to restore and rebuild the factory back to the beginning of its activity. Considering its potential full or partial disappearance, such recovery becomes relevant as a testimonial evidence of what it was.

New Orleans, Louisiana, 1884 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the city of New Orleans showing location of exposition grounds and all approaches thereto by land & water, [by] the World's Industrial and Cotton Centennial Exposition, New Orleans, La., U.S.A., Department of Installation. It was published by The Exposition ca. 1884. Scale [ca. 1:2,000]. Covers also adjacent portions of Jefferson and St. Bernard Parishes. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as exposition grounds, railroads, roads, canals, levees, drainage, block numbers, land ownership in outlying areas, selected public and industrial buildings, cemeteries, Parish boundaries, ferry routes, and more. Depths shown by soundings. Includes inset views, plans, and engravings: Perspective view of the buildings and grounds from the Northeast -- Mexican national headquarters -- Grand Rapids (Mich.) furniture pavilion -- [South pass] -- View of New Orleans in 1719 -- Railroad map of Louisiana and Texas -- Plan of New Orleans in 1770 by Capt.n Pittman of the British Army -- Ground plan -- United States and state exhibits -- Art gallery -- Main building -- Factories and Mills -- Horticultural hall. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

New Orleans, Louisiana, 1906 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: The Picayune's map of New Orleans, Alf. F. Théard, del. It was published by The [Daily] Picayune in 1906. Scale not given. Covers also adjacent portions of Jefferson and St. Bernard Parishes. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, canals, levees, drainage, selected public and industrial buildings, cemeteries, Parish boundaries, ferry routes, and more. Includes legend to points of interest. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

New Orleans, Louisiana, 1849 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan of New Orleans, drawn and eng.d by W. Williams. It was published by W. Williams in 1849. Scale [ca. 1:31,680]. Covers also an adjacent portion of Jefferson Parish. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, canals, levees, drainage, selected public and industrial buildings, cemeteries, city municipality and Parish boundaries, and more. Includes a list of references. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

New Orleans, Louisiana and vicinity, 1956 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: New Orleans and vicinity, Louisiana. It was published by the Geological Survey in 1956. Scale 1:24,000. Covers also adjacent portions of Jefferson, St. Bernard, and Plaquemines Parishes. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD27 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This is a topographic map showing features such as roads, railroads, canals, levees, drainage, selected public and industrial buildings, cemeteries, Parish boundaries, ferry routes, and more. Relief shown by contours and spot heights. Depths shown by soundings. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Mississippi River survey, New Orleans, Louisiana, 1895 (Image 1 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Survey of the Mississippi River : made under the direction of the Mississippi River Commission : chart no. 76, projected from a trigonometrical survey made by the U.S. Coast Survey in 1874. It was published by the Mississippi River Commission ca. 1895. Scale 1:10,000. Covers the City of New Orleans and adjacent portions of Jefferson and St. Bernard Parishes. This layer is image 1 of 4 total images of the four sheet source map, representing the northeast portion of the map. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, canals, drainage, vegetation/ground cover, land ownership in outlying areas, selected public, private, and industrial buildings, parks, cemeteries, Parish boundaries, ferry routes and more. Relief shown by contours. Detailed depths of the Mississippi River shown with soundings and dates of survey, and survey control points. River banks and bottom soil types shown. Includes index chart, list of authorities, and notes. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Mississippi River survey, New Orleans, Louisiana, 1895 (Image 2 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Survey of the Mississippi River : made under the direction of the Mississippi River Commission : chart no. 76, projected from a trigonometrical survey made by the U.S. Coast survey in 1874. It was published by the Mississippi River Commission ca. 1895. Scale 1:10,000. Covers the City of New Orleans and adjacent portions of Jefferson and St. Bernard Parishes. This layer is image 2 of 4 total images of the four sheet source map, representing the southeast portion of the map. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, canals, drainage, vegetation/ground cover, land ownership in outlying areas, selected public, private, and industrial buildings, parks, cemeteries, Parish boundaries, ferry routes and more. Relief shown by contours. Detailed depths of the Mississippi River shown with soundings and dates of survey, and survey control points. River banks and bottom soil types shown. Includes index chart, list of authorities, and notes. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.