Mechanics of a grip system of three-key-board hydraulic tongs developed for offshore oil pipe lines

This paper carries out the analysis of mechanics of a grip system of three-key-board hydraulic tongs developed for offshore oil pipe lines which has been successfully used in oil fields in China. The main improvement of this system is that a lever frame structure is used in the structural design, which reduces greatly the stresses of the major components of the oil pipe tongs. Theoretical analysis and numerical calculation based on thirteen basic equations developed Show that the teeth board of the tongs is not easy to slip as frequently happens to other systems and is of higher reliability.

Initial Hydraulic modelling and Levee Stability Analysis of the Triple M Ranch Restoration Project

“Advanced Watershed Science and Policy (ESSP 660)” is a graduate class taught in the Master of Science in Coastal and Watershed Science & Policy program at California State University Monterey Bay (CSUMB). In 2007, the class was taught in four 4-week modules, each focusing on a local watershed issue. This report is one outcome of one of those 4-week modules taught in the fall 2007 session. (Document contains 32 pages)

Environmental impact of hydraulic escalator dredging on oyster communities

A study to assess the effects of hydraulic escalator dredging on an oyster community was initiated at the request of the Department of Natural Resources, Mary1and Tidewater Fisheries Administration. The purpose of the work was to reevaluate a study done by Manning (1957). A site in the Patuxent River north of Broome Island classified as oyster bottom was selected to conduct an in - situ intensive experiment using the Manning study as a framework for project design. Clams and oysters were present in the study area,although oyster populations were limited in number. (PDFs consists of pp 1-97 and additional Sect II: Middle Bay proposed reclassification sites)

Effects of the Maryland hydraulic clam dredge on populations of the soft-shell clam, Mya arenaria: final contract report

Final report on a three year study designed to investigate the effects of the Maryland hydraulic escalator clam dredge on populations and recruitment of the soft-shell clam, Mya arenaria. Experimental plots were established in the Potomac river, Maryland, and were dredged ina commerical manner by removing only legal size clams. quarterly samples were taken in the experimental and control plots by means of a van Veen grab for juvenile clams and the hydraulic dredge for older, deeper burrowing clams. Sediment samples were taken at selected periods for organic carbon and grain size analysis. Clams were separated into two size-groups. (PDF contains 38 pages)

Design, Construction and Testing of a Hydraulic Power Take-Off for Wave Energy Converters

This paper presents the construction, mathematical modeling and testing of a scaled universal hydraulic Power Take-Off (PTO) device for Wave Energy Converters (WECs). A specific prototype and test bench were designed and built to carry out the tests. The results obtained from these tests were used to adjust an in-house mathematical model. The PTO was initially designed to be coupled to a scaled wave energy capture device with a low speed and high torque oscillating motion and high power fluctuations. Any Energy Capture Device (ECD) that fulfils these requirements can be coupled to this PTO, provided that its scale is adequately defined depending on the rated power of the full scale prototype. The initial calibration included estimation of the pressure drops in the different components, the pressurization time of the oil inside the hydraulic cylinders and the volumetric efficiency of the complete circuit. Since the overall efficiency measured during the tests ranged from 0.69 to 0.8 and the dynamic performance of the PTO was satisfactory, the results are really promising and it is believed that this solution might prove effective in real devices.

The phytoplankton of an enriched, soft-water lakel subject to intermittent hydraulic flushing (Grasmere, English Lake District)

This paper describes some characteristic features of the phytoplankton of Grasmere, one of the smaller of the principal lakes of the English Lake District, and attempts to relate these to distinctive physical and chemical properties of the lake. Quantitative data presented herein are derived from 5-m vertical column samples, collected with a flexible polyethylene hose close to the deepest point of Grasmere, generally at intervals of 14 days ( 7 days from 1972 to 1978, inclusive). The study concludes that although Grasmere has been subject to increased phosphorus-loading and has quickly developed many features associated with eutrophication, the composition of its plankton has retained the characteristics of a mesotrophic, soft-water lake: a vernal diatom maximum, generally dominated by Asterionella, is followed by summer growths of nanoplanktonic species, of various colonial Chlorophyceae, before a substantial return to Asterionella-dominance in the autumn.

Modeling Innovative Power Take-Off Based on Double-Acting Hydraulic Cylinders Array for Wave Energy Conversion

One of the key systems of a Wave Energy Converter for extraction of wave energy is the Power Take-Off (PTO) device. This device transforms the mechanical energy of a moving body into electrical energy. This paper describes the model of an innovative PTO based on independently activated double-acting hydraulic cylinders array. The model has been developed using a simulation tool, based on a port-based approach to model hydraulics systems. The components and subsystems used in the model have been parameterized as real components and their values experimentally obtained from an existing prototype. In fact, the model takes into account most of the hydraulic losses of each component. The simulations show the flexibility to apply different restraining torques to the input movement depending on the geometrical configuration and the hydraulic cylinders on duty, easily modified by a control law. The combination of these two actions allows suitable flexibility to adapt the device to different sea states whilst optimizing the energy extraction. The model has been validated using a real test bench showing good correlations between simulation and experimental tests.

Review of the crevalle jacks, Caranx hippos complex (Teleostei: Carangidae), with a description of a new species from West Africa

The Caranx hippos species complex comprises three extant species: crevalle jack (Caranx hippos) (Linnaeus, 1766) from both the western and eastern Atlantic oceans; Pacific crevalle jack (Caranx caninus) Günther, 1868 from the eastern Pacific Ocean; and longfin crevalle jack (Caranx fischeri) new species, from the eastern Atlantic, including the Mediterranean Sea and Ascension Island. Adults of all three species are superficially similar with a black blotch on the lower half of the pectoral fin, a black spot on the upper margin of opercle, one or two pairs of enlarged symphyseal canines on the lower jaw, and a similar pattern of breast squamation. Each species has a different pattern of hyperostotic bone development and anal-fin color. The two sympatric eastern Atlantic species also differ from each other in number of dorsal-and anal-fin rays, and in large adults of C. fischeri the lobes of these fins are longer and the body is deeper. Caranx hippos from opposite sides of the Atlantic are virtually indistinguishable externally but differ consistently in the expression of hyperostosis of the first dorsalfin pterygiophore. The fossil species Caranx carangopsis Steindachner 1859 appears to have been based on composite material of Trachurus sp. and a fourth species of the Caranx hippos complex. Patterns of hyperostotic bone development are compared in the nine (of 15 total) species of Caranx sensu stricto that exhibit hyperostosis.