Five-level inverter scheme for an open-end winding induction machine with less number of switches

Higher level of inversion is achieved with a less number of switches in the proposed scheme. The scheme proposes a five-level inverter for an open-end winding induction motor which uses only two DC-link rectifiers of voltage rating of Vdc/4, a neutral-point clamped (NPC) three-level inverter and a two-level inverter. Even though the two-level inverter is connected to the high-voltage side, it is always in square-wave operation. Since the two-level inverter is not switching in a pulse width modulated fashion and the magnitude of switching transient is only half compared to the convention three-level NPC inverter, the switching losses and electromagnetic interference is not so high. The scheme is experimentally verified on a 2.5 kW induction machine.

Transplanting the n-terminus from Kv1.4 to Kv1.1 generates an inwardly rectifying K+ channel

A chimeric channel, 4N/1, was generated from two outwardly rectifying K+ channels by linking the N-terminal cytoplasmic domain of hKv1.4 (N terminus ball and chain of hKv1.4) with the transmembrane body of hKvl.l (Delta 78N1 construct of hKvl.l). The recombinant channel has properties similar to the six transmembrane inward rectifiers and opens on hyperpolarization with a threshold of activation at -90 mV. Outward currents are seen on depolarization provided the channel is first exposed to a hyperpolarizing pulse of -100mV or more. Hyperpolarization at and beyond -130mV provides evidence of channel deactivation. Delta 78N1 does not show inward currents on hyperpolarization but does open on depolarizing from -80mV with characteristics similar to native hKvl.l. The outward currents seen in both Delta 78N1 and 4N/1 inactivate slowly at rates consistent with C-type inactivation. The inward rectification of the 4N/1 chimera is consistent with the inactivation gating mechanism. This implies that the addition of the N-terminus from hKv1.4 to hKvl.l shifts channel activation to hyperpolarizing potentials. These results suggest a mechanism involving the N-terminal cytoplasmic domain for conversion of outward rectifiers to inward rectifiers. (C) 1999 Lippincott Williams & Wilkins.

Pixel based fusion using IKONOS imagery

Pixel based image fusion entails combining geometric details of a high-resolution Panchromatic (PAN) image and spectral information of a low-resolution Multispectral (MS) image to produce images with highest spatial content while preserving the spectral information. This work reviews and implements six fusion techniques – À Trous algorithm based wavelet transform (ATW), Mulitresolution Analysis based Intensity Modulation, Gram Schmidt fusion, CN Spectral, Luminance Chrominance and High pass fusion (HPF) on IKONOS imagery having 1 m PAN and 4 m MS channels. Comparative performance analysis of techniques by various methods reveals that ATW followed by HPF perform best among all the techniques.

Signal-Powered Low-Drop-Diode Equivalent Circuit for Full-Wave Bridge Rectifier

Piezoelectric-device-based vibration energy harvesting requires a rectifier for conversion of input ac to usable dc form. Power loss due to diode drop in rectifier is a significant fraction of the already low levels of harvested power. The proposed circuit is a low-drop-diode equivalent, which mimics a diode using linear region-operated MOSFET. The proposed diode equivalent is powered directly from input signal and requires no additional power supply for its control. Power used by the control circuit is kept at a bare minimum to have an overall output power improvement. Diode equivalent was used to replace the four diodes in a full-wave bridge rectifier, which is the basic full- wave rectifier and is a part of the more advanced rectifiers like switch-only and bias-flip rectifiers. Simulation in 130-nm technology and experiment with discrete components show that a bridge rectifier with the proposed diode provides a 30-169% increase in output power extracted from piezoelectric device, as compared to a bridge rectifier with diode-connected MOSFETs. The bridge rectifier with the proposed diode can extract 90% of the maximum available power from an ideal piezoelectric device-bridge rectifier circuit. Setting aside the constraint of power loss, simulations indicate that diode drop as low as 10 mV at 38 mu A can be achieved.

Tunable device properties of free-standing inorganic/organic flexible hybrid structures obtained by exfoliation

We report the fabrication of free-standing flexible inorganic/organic hybrid structures by exfoliating ZnO nanostructured films from the flat indium tin oxide (ITO)/silicon/sapphire substrates using poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS). Strong interaction between ZnO and PEDOT: PSS and the thermomechanical response of PEDOT: PSS are the key issues for the exfoliation to prevail. The performance of the free-standing hybrid structures as rectifiers and photodetectors is better as compared to ITO supported hybrid structures. It is also shown that device properties of hybrid structures can be tuned by using different electrode materials. (C) 2012 American Institute of Physics. http://dx.doi.org/10.1063/1.4729550]

Minimization of grid current distortion in parallel-connected converters through carrier interleaving

Identical parallel-connected converters with unequal load sharing have unequal terminal voltages. The difference in terminal voltages is more pronounced in case of back-to-back connected converters, operated in power-circulation mode for the purpose of endurance tests. In this paper, a synchronous reference frame based analysis is presented to estimate the grid current distortion in interleaved, grid-connected converters with unequal terminal voltages. Influence of carrier interleaving angle on rms grid current ripple is studied theoretically as well as experimentally. Optimum interleaving angle to minimize the rms grid current ripple is investigated for different applications of parallel converters. The applications include unity power factor rectifiers, inverters for renewable energy sources, reactive power compensators, and circulating-power test set-up used for thermal testing of high-power converters. Optimum interleaving angle is shown to be a strong function of the average of the modulation indices of the two converters, irrespective of the application. The findings are verified experimentally on two parallel-connected converters, circulating reactive power of up to 150 kVA between them.

Electrochemical fabrication and electronic behavior of polypyrrole nano-fiber array devices

Electrochemically active Polypyrrole (PPy) nano-fiber array device was fabricated via electrochemical deposition method using aluminum anodic oxide (AAO) membrane as template. After alkaline treatment electrochemically active PPy nano-fiber lost electrochemical activity, and became electrochemically inactive PPy. The electronic properties of PPy nano-fiber array devices were measured by means of a simple method. It was found that for an indium-tin oxide/electrochemically inactive PPy nano-fiber device, the conductivity of nano-fiber increased with the increase of voltage applied on the two terminals of nano-fiber. The electrochemical inactive PPy nano-fiber might be used as a nano-fiber switching diode. Both Au/electrochemically active PPy and Au/electrochemically inactive PPy nano-fiber devices demonstrate rectifying behavior, and might have been used for further application as nano-rectifiers. (c) 2005 Elsevier B.V. All tights reserved.

Hexabromocyclododecane-induced developmental toxicity and apoptosis in zebrafish embryos

Hexabromocyclododecane (HBCD) is widely used as a brominated flame retardant, and has been detected in the aquatic environment, wild animals, and humans. However, details of the environmental health risk of HBCD are not well known. In this study, zebrafish embryos were used to assess the developmental toxicity of the chemical. Four-hour post-fertilization (hpf) zebrafish embryos were exposed to various concentrations of HBCD (0, 0.05, 0.1, 0.5, and 1.0 mg L-1) until 96 h. Exposure to 0.1, 0.5, and 1.0 mg L-1 HBCD significantly increased the malformation rate and reduced survival in the 0.5 and 1.0 mg L-1 HBCD exposure groups. Acridine orange (AO) staining showed that HBCD exposure resulted in cell apoptosis. Reactive oxygen species (ROS) was significantly induced at exposures of 0.1, 0.5, and 1.0 mg L-1 HBCD. To test the apoptotic pathway, several genes related to cell apoptosis, such as p53, Puma, Apaf-1, caspase-9, and caspase-3, were examined using real-time PCR. The expression patterns of these genes were up-regulated to some extent. Two anti-apoptotic genes, Mdm2 (antagonist of p53) and Bcl-2 (inhibitor of Bax), were down-regulated, and the activity of capspase-9 and caspase-3 was significantly increased. The overall results demonstrate that waterborne HBCD is able to produce oxidative stress and induce apoptosis through the involvement of caspases in zebrafish embryos. The results also indicate that zebrafish embryos can serve as a reliable model for the developmental toxicity of HBCD. (C) 2009 Elsevier B.V. All rights reserved.

Developmental toxicity and alteration of gene expression in zebrafish embryos exposed to PFOS

Perfluorooetanesulfonate (PFOS) is a persistent organic pollutant, the potential toxicity of which is causing great concern. In the present study, we employed zebrafish embryos to investigate the developmental toxicity of this compound. Four-hour post-fertilization (hpf) zebrafish embryos were exposed to 0.1, 0.5, 1, 3 and 5 mg/L PFOS. Hatching was delayed and hatching rates as well as larval survivorship, were significantly reduced after the embryos were exposed to 1, 3 and 5 mg/L PFOS until 132 hpf. The fry displayed gross developmental malformations, including epiboly deformities, hypopigmentation, yolk sac edema, tail and heart malformations and spinal curvature upon exposure to PFOS concentrations of I mg/L or greater. Growth (body length) was significantly reduced in the 3 and 5 mg/L PFOS-treated groups. To test whether developmental malformation was mediated via apoptosis, flow cytometry analysis of DNA content, acridine orange staining and TUNEL assay was used. These techniques indicated that more apoptotic cells were present in the PFOS-treated embryos than in the control embryos. Certain genes related to cell apoptosis, p53 and Bax, were both significantly up-regulated upon exposure to all the concentrations tested. In addition, we investigated the effects of PFOS on marker genes related to early thyroid development (hhex and pax8) and genes regulating the balance of androgens and estrogens (cyp19a and cyp19b). For thyroid development, the expression of hhex was significantly up-regulated at all concentrations tested, whereas pax8 expression was significantly up-regulated only upon exposure to lower concentrations of PFOS (0.1, 0.5, 1 mg/L). The expression of cyp19a and of cyp19b was significantly down-regulated at all exposure concentrations. The overall results indicated that zebrafish embryos constitute a reliable model for testing the developmental toxicity of PFOS, and the gene expression patterns in the embryos were able to reveal some potential mechanisms of developmental toxicity. (C) 2008 Elsevier Inc. All rights reserved.

A Fully Integrated 900-MHz Passive RFID Transponder Front End With Novel Zero-Threshold RF-DC Rectifier

This paper presents a fully integrated CMOS analog front end for a passive 900-MHz radio-frequency identification (RFID) transponder. The power supply in this front end is generated from the received RF electromagnetic energy by using an RF-dc voltage rectifier. In order to improve the compatibility with standard CMOS technology, Schottky diodes in conventional RF-dc rectifiers are replaced by diode-connected MOS transistors with zero threshold. Meanwhile, theoretical analyses for the proposed rectifier are provided and verified by both simulation and measurement results. The design considerations of the pulsewidth-modulation (PWM) demodulator and the backscatter modulator in the front end are also discussed for low-power applications. The proposed front end is implemented in a 0.35-mu m 2P4M CMOS technology. The whole chip occupies a die area of 490 x 780 mu m(2) and consumes only 2.1 mu W in reading mode under a self-generated 1.5-V supply voltage. The measurement results show that the proposed rectifier can properly operate with a - 14.7-dBm input RF power at a power conversion efficiency of 13.0%. In the proposed RFID applications, this sensitivity corresponds to 10.88-m communication distance at 4-W equivalent isotropically radiated power from a reader base station.

靶向斑马鱼VEGF的shRNA表达载体的构建及其对斑马鱼胚胎血管发育的影响

血管内皮生长因子(vascular endothelial growth factor, VEGF)是一种多功能的细胞因子，其主要作用是促进血管内皮细胞增殖和增加血管通透性，是肿瘤及正常组织血管生成的中心调控因素，以VEGF为靶点的肿瘤血管靶向性治疗成为近几年肿瘤治疗的新途径。RNAi是近年来新发展的一项反向遗传学技术，是一种研究基因功能的有力工具。斑马鱼作为一种重要的模式生物，被广泛用于胚胎的分子发育机制、疾病模型的构建以及药物筛选等研究中。然而在斑马鱼中运用RNAi技术进行基因功能研究是一个相对较新的领域，研究资料较少，并且目前进行的斑马鱼RNAi实验中，siRNA大都是通过化学方法或体外转录合成的。体外合成的siRNA在进入体内后会被降解而无法达到持久阻抑基因表达的目的。因此本研究旨在探讨VEGF特异性siRNA表达载体对斑马鱼VEGF基因的沉默作用，通过分析表型及相关细胞因子的变化，阐明VEGF对斑马鱼胚胎血管生成的影响及作用机制。 研究通过计算机辅助设计软件，针对斑马鱼VEGF mRNA不同位点设计合成了4段含siRNA特异序列的DNA单链，经退火，克隆入pSilencer 4.1-CMV neo载体CMV启动子下游，构建了重组质粒pS1-VEGF、pS2-VEGF、pS3-VEGF及pS4-VEGF。 通过显微注射的方法将载体导入1-2细胞期斑马鱼体内，于胚胎发育的48 h采用RT-PCR的方法检测VEGF基因的表达量，研究不同干扰序列对VEGF基因表达的干涉作用。结果显示，针对不同位点的表达载体对VEGF基因表达的抑制效率有显著差异。它们对VEGF mRNA的抑制率分别为80.5%，42.8%，12.5%，40.7%。通过筛选我们得到了一条具有高效抑制作用的载体pS1-VEGF，该载体的相应序列靶向斑马鱼两个主要异构体VEGF165和VEGF121的共有外显子序列。 形态学检测结果显示，注射了pS1-VEGF的胚胎出现了心包膜水肿、血流速度减慢、循环红细胞堆积等症状。定量碱性磷酸酶染色显示，注射pS1-VEGF能够抑制斑马鱼胚胎新生血管的形成，当注射剂量为0.4 ng时，血管生成的抑制率为31.8%。NBT/BCIP血管染色显示，注射该载体后72 h，50%的斑马鱼肠下静脉、节间血管以及其它血管的发育受到不同程度的抑制。随着注射剂量的加大，血管发育受抑制的情况也随之加重，当注射剂量为1 ng时，只有心脏、头部及卵黄有血液循环。对干扰效果的特异性进行了研究，结果表明pS1-VEGF对斑马鱼内源基因胸苷酸合成酶（thymidylate synthase, TS）基因的表达没有明显的抑制作用。针对TS基因的shRNA表达载体及与斑马鱼没有同源性的对照载体对VEGF基因表达也没有明显的抑制作用。浓度梯度实验表明在0-1.2 ng的范围内干扰效果具有剂量依赖性。 以胚胎整体原位杂交的方法检测质粒对VEGF基因受体NRP1基因表达的影响，发现VEGF特异性shRNA表达载体能够引起NRP1基因表达的降低，说明斑马鱼中VEGF所介导的血管生成作用至少在部分上是依赖于NRP通路所调节的。 本研究工作为进一步研究斑马鱼基因功能、VEGF调控网络提供了一个快速、有效的手段，为阐明斑马鱼的血管生成机制提供了新的资料，为采用RNAi技术，以VEGF为靶点，以斑马鱼为模型对肿瘤进行基因治疗研究奠定了基础。

Lower extremity amputation in people with diabetes: Trends and determinants

Introduction: The prevalence of diabetes is rising rapidly. Assessing quality of diabetes care is difficult. Lower Extremity Amputation (LEA) is recognised as a marker of the quality of diabetes care. The focus of this thesis was first to describe the trends in LEA rates in people with and without diabetes in the Republic of Ireland (RoI) in recent years and then, to explore the determinants of LEA in people with diabetes. While clinical and socio-demographic determinants have been well-established, the role of service-related factors has been less well-explored. Methods: Using hospital discharge data, trends in LEA rates in people with and without diabetes were described and compared to other countries. Background work included concordance studies exploring the reliability of hospital discharge data for recording LEA and diabetes and estimation of diabetes prevalence rates in the RoI from a nationally representative study (SLAN 2007). To explore determinants, a systematic review and meta-analysis assessed the effect of contact with a podiatrist on the outcome of LEA in people with diabetes. Finally, a case-control study using hospital discharge data explored determinants of LEA in people with diabetes with a particular focus on the timing of access to secondary healthcare services as a risk factor. Results: There are high levels of agreement between hospital discharge data and medical records for LEA and diabetes. Thus, hospital discharge data was deemed sufficiently reliable for use in this PhD thesis. A decrease in major diabetes-related LEA rates in people with diabetes was observed in the RoI from 2005-2012. In 2012, the relative risk of a person with diabetes undergoing a major LEA was 6.2 times (95% CI 4.8-8.1) that of a person without diabetes. Based on the systematic review and meta-analysis, contact with a podiatrist did not significantly affect the relative risk (RR) of LEA in people with diabetes. Results from the case-control study identified being single, documented CKD and documented hypertension as significant risk factors for LEA in people with diabetes whilst documented retinopathy was protective. Within the seven year time window included in the study, no association was detected between LEA in patients with diabetes and timing of patient access to secondary healthcare for diabetes management. Discussion: Many countries have reported reduced major LEA rates in people with diabetes coinciding with improved organisation of healthcare systems. Reassuringly, these first national estimates in people with diabetes in the RoI from 2005 to 2012 demonstrated reducing trends in major LEA rates. This may be attributable to changes in diabetes care and also, secular trends in smoking, dyslipidaemia and hypertension. Consistent with international practice, LEA trends data in Ireland can be used to monitor quality of care. Quantifying this improvement precisely, though, is problematic without robust denominator data on the prevalence of diabetes. However, a reduction in major diabetes-related LEA rates suggests improved quality of diabetes care. Much controversy exists around the reliability of hospital discharge data in the RoI. This thesis includes the first multi-site study to explore this issue and found hospital discharge data reliable for the reporting of the procedure of LEA and diagnosis of diabetes. This project did not detect protective effects of access to services including podiatry and secondary healthcare for LEA in people with diabetes. A major limitation of the systematic review and meta-analysis was the design and quality of the included studies. The data available in the area of effect of contact with a podiatrist on LEA risk are too sparse to say anything definitive about the efficacy of podiatry on LEA. Limitations of the case-control study include lack of a diabetes register in Ireland, restricted information from secondary healthcare and lack of data available from primary healthcare. Due to these issues, duration of disease could not be accounted for in the study which limits the conclusions that can be drawn from the results. The model of diabetes care in the RoI is currently undergoing a re-configuration with plans to introduce integrated care. In the future, trends in LEA rates should be continuously monitored to evaluate the effectiveness of changes to the healthcare system. Efforts are already underway to improve the availability of routine data from primary healthcare with the recent development of the iPCRN (Irish Primary Care Research Network). Linkage of primary and secondary healthcare records with a unique patient identifier should be the goal for the future.

Three parallel programming paradigms: Comparisons on an archetypal PDE computation

Three paradigms for distributed-memory parallel computation that free the application programmer from the details of message passing are compared for an archetypal structured scientific computation -- a nonlinear, structured-grid partial differential equation boundary value problem -- using the same algorithm on the same hardware. All of the paradigms -- parallel languages represented by the Portland Group's HPF, (semi-)automated serial-to-parallel source-to-source translation represented by CAP-Tools from the University of Greenwich, and parallel libraries represented by Argonne's PETSc -- are found to be easy to use for this problem class, and all are reasonably effective in exploiting concurrency after a short learning curve. The level of involvement required by the application programmer under any paradigm includes specification of the data partitioning, corresponding to a geometrically simple decomposition of the domain of the PDE. Programming in SPMD style for the PETSc library requires writing only the routines that discretize the PDE and its Jacobian, managing subdomain-to-processor mappings (affine global-to-local index mappings), and interfacing to library solver routines. Programming for HPF requires a complete sequential implementation of the same algorithm as a starting point, introduction of concurrency through subdomain blocking (a task similar to the index mapping), and modest experimentation with rewriting loops to elucidate to the compiler the latent concurrency. Programming with CAPTools involves feeding the same sequential implementation to the CAPTools interactive parallelization system, and guiding the source-to-source code transformation by responding to various queries about quantities knowable only at runtime. Results representative of "the state of the practice" for a scaled sequence of structured grid problems are given on three of the most important contemporary high-performance platforms: the IBM SP, the SGI Origin 2000, and the CRAYY T3E.

New modular structure DC-DC converter without electrolytic capacitors for renewable energy applications