Associação genética entre precocidade sexual e características de crescimento e terminação em animais Nelore

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Suplementação alimentar e índices de área foliar residual sobre as características de carcaça e qualidade da carne de cordeiros

Pós-graduação em Zootecnia - FCAV

Análise Bayesiana da área de olho do lombo e da espessura de gordura obtidas por ultrassom e suas associações com outras características de importância econômica na raça Nelore

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Curvas de crescimento de características de carcaça obtidas por ultrassonografia em bovinos Nelore selecionados para peso pós desmame

Pós-graduação em Zootecnia - FMVZ

Polymorphism analysis in genes of the somatotropic axis in Nellore cattle selected for growth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Association of ADIPOQ, OLR1 and PPARGC1A gene polymorphisms with growth and carcass traits in Nelore cattle

In beef cattle farming, growth and carcass traits are important for genetic breeding programs. Molecular markers can be used to assist selection and increase genetic gain. The ADIPOQ, OLR1 and PPARGC1A genes are involved in lipid synthesis and fat accumulation in adipose tissue. The objective of this study was to identify polymorphisms in these genes and to assess the association with growth and carcass traits in Nelore cattle. A total of 639 animals were genotyped by PCR-RFLP for rs208549452, rs109019599 and rs109163366 in ADIPOQ, OLR1 and PPARGC1A gene, respectively. We analyzed the association of SNPs identified with birth weight, weaning weight, female yearling weight, female hip height, male yearling weight, male hip height, loin eye area, rump fat thickness, and backfat thickness. The OLR1 marker was associated with rump fat thickness and weaning weight (P < 0.05) and the PPARGC1 marker was associated with female yearling weight.

Body condition score of Nellore beef cows: a heritable measure to improve the selection of reproductive and maternal traits

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Suplementação no período das águas de bovinos e bubalinos recriados em pastagem de capim-xaraés (Urochloa brizantha Syn. Brachiaria brizantha cv. Xaraés)

Pós-graduação em Zootecnia - FMVZ

Correlações entre escores visuais e características produtivas em prova de ganho de peso de bovinos da raça Nelore Mocha

The objective was evaluate the phenotypic correlations among visual scores, performance traits and scrotal circumference of the polled Nelore cattle performance tests. Animals of the fifth, sixth, seventh official performance test in pasture were analysed. At the end of each test period the following measures were taken: adjusted weight to 550 days, gain weight, visual score (body structure; precocity and muscle) and scrotal circumference. The musculature, precocity and body structure showed significant positive correlations (P <0.01) with gain weight, adjusted average daily weight to 550 days, scrotal circumference and chest circumference. However, only hip height showed a significant positive correlation with muscularity. Therefore, in polled Nelore cattle, regards to performance test in pasture, the visual scores show positive correlation with the performance traits and scrotal circumference, showing that visual scores is important tool in the polled Nelore Cattle performance test.

Estudo genético do escore de condição corporal de vacas Nelore

Pós-graduação em Genética e Melhoramento Animal - FCAV

Effects of Initial Body Condition, Frame Size and Concentration of Dietary Energy on Carcass Value of Finished Steers

Yearling steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed diets containing 0.59 or 0.64 Mcal NEg per pound of diet. The value of each carcass was determined by use of the Oklahoma State University Boxed Beef Calculator. Sorting to increase hip height decreased the percentage of Choice carcasses and fat cover, increased ribeye area, and had no effect on carcass weight or yield grades 1 and 2. Sorting to decrease initial fat cover decreased carcass weight, carcass fat cover, and percentage of choice carcasses and increased the proportion of yield grades 1 and 2 carcasses. Concentration of energy in the finishing diet had no effect on carcass measurements. Increasing the percentage of yield grades 1 and 2 carcasses did not result in increased economic value of the carcasses when quality grades were lower and when there was a wide spread between Choice and Select carcasses, as occurred in 1996. With less spread between Choice and Select, as in 1997, sorting the cattle to increase yield grades 1 and 2 resulted in increased value, especially for close-trim boxed beef. The results of this study emphasize the importance of knowing how carcasses will grade before selecting a valuebased market for selling cattle.

Effects of Initial Body Condition, Frame Size and Concentration of Dietary Energy on Performance of Finishing Steers

Steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed a diet containing 0.59 or 0.64 Mcal NEg per pound of diet. Steers with less initial fat cover (.08 in.) gained slightly faster, consumed less feed, and therefore tended to be more efficient than steers with greater finish (.16 in.). Steers fed the lower-energy diet consumed more feed, gained similarly, and were less efficient than steers fed the higher-energy diet. The NRC computer model to evaluate beef cattle diets underpredicted performance of cattle in this experiment, but accurately predicted the differences in gain and feed efficiency observed between the leaner and fatter steers and between the two diets. In this study, the shorter steers (49.4 vs 52.2 in. initial height at the hip) gained faster with slightly greater feed intake and the same feed conversion.

Comparison of Various Methods of Estrus Detection in Synchronized Virgin Beef Heifers

Methods of heat detection were compared in the Mid- Crest Area Cattle Evaluation Program (MACEP) heifer development program in the 1998-breeding season. A total of 189 heifers from thirteen consignors entered the program on November 10, 1997. These heifers were condition scored, hip height measured, weighed, disposition scored, booster vaccinated, and treated for parasites at the time of arrival. Determination of the heifer’s mature weight was made and a target of 65% of their mature weight at breeding was established. The ration was designed to meet this goal. The heifers were kept in a dry lot until all heifers were AI bred once. The heifers were periodically weighed and condition scored to monitor their gains and the ration was adjusted as needed. The estrus synchronization program consisted of an oral progesterone analog for 14 days; 17 days after completion of the progesterone analog treatment a single injection of prostaglandin was given and the heifers were then estrus detected. Two concurrent methods of estrus detection were utilized: 1) Ovatec â electronic breeding probe (probe), 2) HeatWatchâ estrus detection system (HW), and 3) a combination of probe and HW. Probe readings were obtained each 12 hours and the heifers were continuously monitored for estrus activity using the HW system. The probe was used as the primary estrus detection method and the HW system was used as a back-up system. Those heifers that did not demonstrate any estrus signs prior to 96 hours post prostaglandin treatment were mass inseminated at 96 hours. Post AI breeding, 151 of the heifers were placed on pasture and ran with clean-up bulls for 60 days. The remaining heifers left the program after the AI breeding was completed. Pregnancy to the AI breeding was determined by ultrasound on June 29, 1998. Results from using both probe and HW were 60% pregnant by AI, probe alone was 32% pregnant by AI, and HW alone was 27% pregnant by AI. The result of mass insemination was 20% pregnant by AI.

Experimentally reduced hip-abductor muscle strength and frontal-plane biomechanics during walking

Researchers have postulated that reduced hip-abductor muscle strength may have a role in the progression of knee osteoarthritis by increasing the external knee-adduction moment. However, the relationship between hip-abductor strength and frontal-plane biomechanics remains unclear. To experimentally reduce hip-abduction strength and observe the subsequent changes in frontal-plane biomechanics. Descriptive laboratory study. Research laboratory. Eight healthy, recreationally active men (age = 27 ± 6 years, height = 1.75 ± 0.11 m, mass = 76.1 ± 10.0 kg). All participants underwent a superior gluteal nerve block injection to reduce the force output of the hip-abductor muscle group. Maximal isometric hip-abduction strength and gait biomechanical data were collected before and after the injections. Gait biomechanical variables collected during walking consisted of knee- and hip-adduction moments and impulses and the peak angles of contralateral pelvic drop, hip adduction, and ipsilateral trunk lean. Hip-abduction strength was reduced after the injection (P = .001) and remained lower than baseline values at the completion of the postinjection gait data collection (P = .02). No alterations in hip- or knee-adduction moments (hip: P = .11; knee: P = .52) or impulses (hip: P = .16; knee: P = .41) were found after the nerve block. Similarly, no changes in angular kinematics were observed for contralateral pelvic drop (P = .53), ipsilateral trunk lean (P = .78), or hip adduction (P = .48). A short-term reduction in hip-abductor strength was not associated with alterations in the frontal-plane gait biomechanics of young, healthy men. Further research is needed to determine whether a similar relationship is true in older adults with knee osteoarthritis.

A low-cost solution for the restoration of femoral head centre during total hip arthroplasty

Restoration of joint centre during total hip arthroplasty is critical. While computer-aided navigation can improve accuracy during total hip arthroplasty, its expense makes it inaccessible to the majority of surgeons. This article evaluates the use, in the laboratory, of a calliper with a simple computer application to measure changes in femoral head centres during total hip arthroplasty. The computer application was designed using Microsoft Excel and used calliper measurements taken pre- and post-femoral head resection to predict the change in head centre in terms of offset and vertical height between the femoral head and newly inserted prosthesis. Its accuracy was assessed using a coordinate measuring machine to compare changes in preoperative and post-operative head centre when simulating stem insertion on 10 sawbone femurs. A femoral stem with a modular neck was used, which meant nine possible head centre configurations were available for each femur, giving 90 results. The results show that using this technique during a simulated total hip arthroplasty, it was possible to restore femoral head centre to within 6?mm for offset (mean 1.67?±?1.16?mm) and vertical height (mean 2.14?±?1.51?mm). It is intended that this low-cost technique be extended to inform the surgeon of a best-fit solution in terms of neck length and neck type for a specific prosthesis.