The Banhado Alkaline Complex, Southeastern Brazil: source and evolution of potassic SiO2-undersaturated high-Ca and low-Ca magmatic series

The Cretaceous Banhado alkaline complex in southeastern Brazil presents two potassic SiO2-undersaturated series. The high-Ca magmatic series consist of initially fractionated olivine (Fo(92-91)) + diopside (Wo(48-43)En(49-35)Ae(0-7)), as evidenced by the presence of xenocrysts and xenoliths. In that sequence, diopside (Wo(47-38)En(46-37)Ae(0-8)) + phlogopite + apatite + perovskite (Prv(> 92)) crystallized to form the phlogopite melteigite and led to the Ca enrichment of the magma. Diopside (Wo(47-41)En(32-24) Ae(3-14)) continued to crystallize as an early mafic mineral, followed by nepheline (Ne(74.8-70.1)Ks(26.3-21.2)Qz(7.6-0.9)) and leucite (Lc(65-56)) and subsequently by melanite and potassic feldspar (Or(85-99)Ab(1-7)) to form melanite ijolites, wollastonite-melanite urtites and melanite-nepheline syenites. Melanite-pseudoleucite-nepheline syenites are interpreted to be a leucite accumulation. Melanite nephelinite dykes are believed to represent some of the magmatic differentiation steps. The low-Ca magmatic series is representative of a typical fractionation of aegirine-augite (Wo(36-29)En(25-4)Ae(39-18)) + alkali feldspar (Or(57-96)Ab(3-43)) + nepheline (Ne(76.5-69.0)Ks(19.9-14.4)Qz(15.1-7.7)) + titanite from phonolite magma. The evolution of this series from potassic nepheline syenites to sodic sodalite syenites and sodalitolites is attributed to an extensive fractionation of potassic feldspar, which led to an increase of the NaCl activity in the melt during the final stages forming sodalite-rich rocks. Phonolite dykes followed a similar evolutionary process and also registered some crustal assimilation. The mesocratic nepheline syenites showed interactions with phlogopite melteigites, such as compatible trace element enrichments and the presence of diopside xenocrysts, which were interpreted to be due to a mixing/mingling process of phonolite and nephelinite magmas. The geochemical data show higher TiO2 and P2O5 contents and lower SiO2 contents for the high-Ca series and different LILE evolution trends and REE chondrite-normalized patterns as compared to the low-Ca series. The Sr-87/Sr-86, Nd-143/Nd-144, Pb-206/Pb-204 and Pb-208/Pb-204 initial ratios for the high-Ca series (0.70407-0.70526, 0.51242-0.51251, 17.782-19.266 and 38.051-39.521, respectively) were slightly different from those of the low-Ca series (0.70542-0.70583, 0.51232-0.51240, 17.758-17.772 and 38.021-38.061, respectively). For both series, a CO2-rich potassic metasomatized lithospheric mantle enriched the source with rutile-bearing phlogopite clinopyroxenite veins. Kamafugite-like parental magma is attributed to the high-Ca series with major contributions from the melting of the veins. Potassic nephelinite-like parental magma is assigned to the low-Ca series, where the metasomatized wall-rock played a more significant role in the melting process.

Perioperative fluid management: comparison of high, medium and low fluid volume on tissue oxygen pressure in the small bowel and colon

BACKGROUND AND OBJECTIVE: Insufficient blood flow and oxygenation in the intestinal tract is associated with increased incidence of postoperative complications after bowel surgery. High fluid volume administration may prevent occult regional hypoperfusion and intestinal tissue hypoxia. We tested the hypothesis that high intraoperative fluid volume administration increases intestinal wall tissue oxygen pressure during laparotomy. METHODS: In all, 27 pigs were anaesthetized, ventilated and randomly assigned to one of the three treatment groups (n = 9 in each) receiving low (3 mL kg-1 h-1), medium (7 mL kg-1 h-1) or high (20 mL kg-1 h-1) fluid volume treatment with lactated Ringer's solution. All animals received 30% and 100% inspired oxygen in random order. Cardiac index was measured with thermodilution and tissue oxygen pressure with a micro-oximetry system in the jejunum and colon wall and subcutaneous tissue. RESULTS: Groups receiving low and medium fluid volume treatment had similar systemic haemodynamics. The high fluid volume group had significantly higher mean arterial pressure, cardiac index and subcutaneous tissue oxygenation. Tissue oxygen pressures in the jejunum and colon were comparable in all three groups. CONCLUSIONS: The three different fluid volume regimens tested did not affect tissue oxygen pressure in the jejunum and colon, suggesting efficient autoregulation of intestinal blood flow in healthy subjects undergoing uncomplicated abdominal surgery.

Loss model for a high frequency and low load DC/DC synchronous buck converter

This work presents a behavioral-analytical hybrid loss model for a buck converter. The model has been designed for a wide operating frequency range up to 4MHz and a low power range (below 20W). It is focused on the switching losses obtained in the power MOSFETs. Main advantages of the model are the fast calculation time and a good accuracy. It has been validated by simulation and experimentally with one Ga, power transistor and two Si MOSFETs. Results show good agreement between measurements and the model.

Hybrid behavioral-analytical loss model for a high frequency and low load DC/DC buck converter

This work presents a behavioral-analytical hybrid loss model for a buck converter. The model has been designed for a wide operating frequency range up to 4MHz and a low power range (below 20W). It is focused on the switching losses obtained in the power MOSFETs. Main advantages of the model are the fast calculation time (below 8.5 seconds) and a good accuracy, which makes this model suitable for the optimization process of the losses in the design of a converter. It has been validated by simulation and experimentally with one GaN power transistor and three Si MOSFETs. Results show good agreement between measurements and the model

Silver and pewter: a tale of high life and low life in New York.

Mode of access: Internet.

A comparative study of high -achieving and low -achieving African -American students in an urban setting

The purpose of this study was to delineate which demographic and school variables were important for predicting the achievement of 10th grade African-American students. The sample population was divided into two groups: high-achievers, students with GPAs of 3.5 or higher, and low-achievers, students with GPAs of 1.5 or lower. Variables examined in the study included: gender; birth place; student's native language; exceptionality (ESE); history of English proficiency (LEP); SES (lunch status) in elementary and high school; the percentage of the Black student population in high school; and suspensions, absences, tardies, and the Stanford Achievement Test (SAT) scores in reading comprehension, mathematics computation, and mathematics applications in elementary and middle school. Two separate logistic regression analyses were conducted to determine which variables were influential in predicting achievement.^ Analysis 1 (N = 366), which included all the variables, except the SAT percentile scores, correctly classified 87% of the students as high-achievers or low-achievers. The results from Analysis 1 revealed that students who--were female; spoke a language other than English as their first language; did not apply for free or reduced lunch in elementary school; were in the gifted program; had no absences or tardies in elementary school; had no suspensions or tardies in middle school; and attended a high school with a lower percentage of Black students--were more likely to be high-achieving than low-achieving.^ Analysis 2 (N = 274) included all the variables and resulted in 94% of the students being correctly classified. It was found that students who--were female; were currently or previously classified as Limited English Proficient (LEP); did not apply for free or reduced lunch in elementary school; had no suspensions or tardies in middle school; and had higher percentile scores in reading comprehension and mathematics computation on the SAT in middle school--were more likely to high-achieving than low-achieving.^ The quantitative analyses were coupled with interviews from a purposeful sample of the population (N = 12) to gain additional insight about why some African-American students are succeeding in our schools and others are not. This study provides a viable means for assessing African-American students' achievement patterns in our schools. ^

High pressure and low temperature study of ammonia borane and lithium amidoborane

Hydrogen has been considered as a potentially efficient and environmentally friendly alternative energy solution. However, one of the most important scientific and technical challenges that the "hydrogen economy" faces is the development of safe and economically viable on-board hydrogen storage for fuel cell applications, especially to the transportation sector. Ammonia borane (BH3NH 3), a solid state hydrogen storage material, possesses exceptionally high hydrogen content (19.6 wt%).However, a fairly high temperature is required to release all the hydrogen atoms, along with the emission of toxic borazine. Recently research interests are focusing on the improvement of H2 discharge from ammonia borane (AB) including lowering the dehydrogenation temperature and enhancing hydrogen release rate using different techniques. Till now the detailed information about the bonding characteristics of AB is not sufficient to understand details about its phases and structures. ^ Elemental substitution of ammonia borane produces metal amidoboranes. Introduction of metal atoms to the ammonia borane structure may alter the bonding characteristics. Lithium amidoborane is synthesized by ball milling of ammonia borane and lithium hydride. High pressure study of molecular crystal provides unique insight into the intermolecular bonding forces and phase stability. During this dissertation, Raman spectroscopic study of lithium amidoborane has been carried out at high pressure in a diamond anvil cell. It has been identified that there is no dihydrogen bond in the lithium amidoborane structure, whereas dihydrogen bond is the characteristic bond of the parent compound ammonia borane. It has also been identified that the B-H bond becomes weaker, whereas B-N and N-H bonds become stronger than those in the parent compound ammonia borane. At high pressure up to 15 GPa, Raman spectroscopic study indicates two phase transformations of lithium amidoborane, whereas synchrotron X-ray diffraction data indicates only one phase transformation of this material. ^ Pressure and temperature has a significant effect on the structural stability of ammonia borane. This dissertation explored the phase transformation behavior of ammonia borane at high pressure and low temperature using in situ Raman spectroscopy. The P-T phase boundary between the tetragonal (I4mm) and orthorhombic (Pmn21) phases of ammonia borane has been determined. The transition has a positive Clapeyron slope which indicates the transition is of exothermic in nature. Influence of nanoconfinemment on the I4mm to Pmn2 1 phase transition of ammonia borane was also investigated. Mesoporus silica scaffolds SBA-15 with pore size of ~8 nm and MCM-41 with pore size of 2.1-2.7 nm, were used to nanoconfine ammonia borane. During cooling down, the I4mm to Pmn21 phase transition was not observed in MCM-41 nanoconfined ammonia borane, whereas the SBA-15 nanocondfined ammonia borane shows the phase transition at ~195 K. Four new phases of ammonia borane were also identified at high pressure up to 15 GPa and low temperature down to 90 K.^

Response of A. aurita ephyrae to three stressors: high-temperature, high-CO2 and low-oxygen

Global change is affecting marine ecosystems through a combination of different stressors such as warming, ocean acidification and oxygen depletion. Very little is known about the interactions among these factors, especially with respect to gelatinous zooplankton. Therefore, in this study we investigated the direct effects of pH, temperature and oxygen availability on the moon jellyfish Aurelia aurita, concentrating on the ephyral life stage. Starved one-day-old ephyrae were exposed to a range of pCO2 (400-4000 ppm) and three different dissolved oxygen levels (from saturated to hypoxic conditions), in two different temperatures (5 and 15 °C) for 7 days. Carbon content and swimming activity were analysed at the end of the incubation period, and mortality noted. General linearized models were fitted through the data, with the best fitting models including two- and three-way interactions between pCO2, temperature and oxygen concentration. The combined effect of the stressors was small but significant, with the clearest negative effect on growth caused by the combination of all three stressors present (high temperature, high CO2, low oxygen). We conclude that A. aurita ephyrae are robust and that they are not likely to suffer from these environmental stressors in a near future.

High Pressure and Low Temperature Study of Ammonia Borane and Lithium Amidoborane

Hydrogen has been considered as a potentially efficient and environmentally friendly alternative energy solution. However, one of the most important scientific and technical challenges that the “hydrogen economy” faces is the development of safe and economically viable on-board hydrogen storage for fuel cell applications, especially to the transportation sector. Ammonia borane (BH3NH3), a solid state hydrogen storage material, possesses exceptionally high hydrogen content (19.6 wt%).However, a fairly high temperature is required to release all the hydrogen atoms, along with the emission of toxic borazine. Recently research interests are focusing on the improvement of H2 discharge from ammonia borane (AB) including lowering the dehydrogenation temperature and enhancing hydrogen release rate using different techniques. Till now the detailed information about the bonding characteristics of AB is not sufficient to understand details about its phases and structures. Elemental substitution of ammonia borane produces metal amidoboranes. Introduction of metal atoms to the ammonia borane structure may alter the bonding characteristics. Lithium amidoborane is synthesized by ball milling of ammonia borane and lithium hydride. High pressure study of molecular crystal provides unique insight into the intermolecular bonding forces and phase stability. During this dissertation, Raman spectroscopic study of lithium amidoborane has been carried out at high pressure in a diamond anvil cell. It has been identified that there is no dihydrogen bond in the lithium amidoborane structure, whereas dihydrogen bond is the characteristic bond of the parent compound ammonia borane. It has also been identified that the B-H bond becomes weaker, whereas B-N and N-H bonds become stronger than those in the parent compound ammonia borane. At high pressure up to 15 GPa, Raman spectroscopic study indicates two phase transformations of lithium amidoborane, whereas synchrotron X-ray diffraction data indicates only one phase transformation of this material. Pressure and temperature has a significant effect on the structural stability of ammonia borane. This dissertation explored the phase transformation behavior of ammonia borane at high pressure and low temperature using in situ Raman spectroscopy. The P-T phase boundary between the tetragonal (I4mm) and orthorhombic (Pmn21) phases of ammonia borane has been determined. The transition has a positive Clapeyron slope which indicates the transition is of exothermic in nature. Influence of nanoconfinemment on the I4mm to Pmn21 phase transition of ammonia borane was also investigated. Mesoporus silica scaffolds SBA-15 with pore size of ~8 nm and MCM-41 with pore size of 2.1-2.7 nm, were used to nanoconfine ammonia borane. During cooling down, the I4mm to Pmn21 phase transition was not observed in MCM-41 nanoconfined ammonia borane, whereas the SBA-15 nanocondfined ammonia borane shows the phase transition at ~195 K. Four new phases of ammonia borane were also identified at high pressure up to 15 GPa and low temperature down to 90 K.

A lock-type cell for NMR studies at high hydrostatic pressures and low temperatures

Details of a simple and convenient high-pressure cell for continuous-wave, wide-line nuclear magnetic resonance investigation at high pressures and low temperatures are described. Experimental results obtained with the cell at 14*108 Pa and 77K for ammonium iodide are presented briefly.

Experimental paracoccidioidomycosis in high and low antibody responder mice of Selection IV-A

High (H) and low (L) responder mice were selected for their ability to produce antibodies against sheep and human erythrocytes (Selection IV-A). In this selection, the difference in antibody responsiveness between H and L lines (HIV-A and LIV-A mice, respectively) was shown to depend mainly on macrophage function. The more rapid catabolism of antigens by macrophages in L mice has been suggested as the main cause of the low antibody production. Due to this high macrophage activity, L animals have been described as more resistant than H animals to intracellular pathogens. These animals were utilized as an experimental model of paracoccidioidomycosis. HIV-A and LIV-A mice were infected with Paracoccidioides brasiliensis by the intravenous route. As expected, H mice were more susceptible to P. brasiliensis with a shorter survival time and higher levels of specific antibodies when compared to L mice. Contrasting with the survival time, the lungs, spleen and liver from H mice showed typical nodular granulomas containing epithelioid and giant cells and few fungi. on the other hand, in LN-A mice, the lesions of these organs were characterized by looser granulomas with irregular borders and the presence of a large number of fungi, However, the adrenal gland showed different lesion patterns. In H mice these lesions were extensive and characterized by loose granulomas with numerous fungi, while in LIV-A mice the lesions were small and limited to the cortex. Moreover the HIV-A mice presented higher levels of serum corticosterone when compared to LIV-A ones. The higher susceptibility of H mice could be attributed to the extensive lesions of the adrenal glands. These results suggest the use of the H line from the IV-A Selection as an experimental model for further studies of adrenal involvement in paracoccidioidomycosis.

Occlusal caries prevention in high and low risk schoolchildren. A clinical trial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytokine production in lungs and adrenal glands of high and low antibody producing mice infected with Paracoccidioides brasiliensis

Mice genetically selected for high (H) and low (L) antibody production (HIV-A and L-IV-A) were used in an experimental model of paracoccidioidomycosis. In a previous work, it was observed that male HIV-A animals were more susceptible to the infection due to adrenal gland damage. Male HIV-A and LIV-A animals were intravenously inoculated with Paracoccidioides brasiliensis (strain 18) and sacrificed 2, 4, 6, 8 and 10 weeks after inoculation. At each time interval, lungs and adrenals were removed to estimate recoverability of the fungus, as well as to determine Th1 (IFN-gamma, TNF-alpha) and Th2 (IL-4 and IL-10) cytokine profiles. While viable fungi recoverability from the lungs of HIV-A mice was higher after 4 and 8 weeks, there was less fungal recovery from the adrenals of LIV-A animals after the 2nd week, with total fungal elimination after the 8th week. With regard to Th2 cytokines, there was an inhibition in IL-4 production in the organs from infected animals, the extent of which varied according to the organ and the time period after initiation of infection. IL-10 production was found to be lower in both organs. Determination of Th1 cytokines revealed that IFN-gamma production increased in both organs, mainly in the adrenal of LIV-A after 8 and 10 weeks, when these animals showed a total fungal elimination. A significant difference was observed between HIV-A and LIV-A concerning TNF-alpha production in both organs and at all recovery times, in that LIV-A produced a higher level of this cytokine, mainly in the adrenal. These results may explain the high susceptibility of HIV-A to P. brasiliensis infection, is due, at least in part, to adrenal involvement. The higher production of Th1 cytokines by LIV-A in comparison to HIV-A mice may account for LIV-A resistance to P. brasiliensis infection. Our data reveal the importance of this experimental model in the study of the adrenal involvement in paracoccidioidomycosis, since this gland may be highly compromised in the patients, leading to the development of Addison's Disease.

Toward genetic dissection of high and low antibody responsiveness in Biozzi mice

Several distinct chromosomal segments were recently identified by cosegregation analysis of polymorphic markers with antibody responsiveness in an F2 cross between high (H) and low (L) antibody responder lines of Biozzi mice. The effect associated with the relevant markers has now been investigated in backcross populations (toward the L line) bred from H and L mice made coisogenic at the H-2 locus. The antibody titers, measured on days 5 and 14 of the primary response to sheep red blood cells, were considered to be two distinct quantitative phenotypes. The results of single or multilocus analyses demonstrated the significant involvement, at one or the two titration times, of Im gene(s) on four distinct chromosomes: 4, 8, 12, and 18. The regions on chromosomes 6 and 10 have a lesser but still suggestive effect. The contribution of each locus ranged from 3% to 13%, and together these loci accounted for about 40% of the phenotypic variance at each titration time. The data are compatible with an additive effect of the relevant loci and suggestive of some interaction effects. In a second backcross toward L line, the H line alleles of the putative Im genes on chromosomes 6, 8, and 12 were isolated from each other and their effects were still detected.

Fibre optic sensors for high speed hypervelocity impact studies and low velocity drop tests

The initial aim of this project was to develop a non-contact fibre optic based displacement sensor to operate in the harsh environment of a 'Light Gas Gun' (LGG), which can 'fire' small particles at velocities ranging from 1-8.4 km/s. The LGG is used extensively for research in aerospace to analyze the effects of high speed impacts on materials. Ideally the measurement should be made close to the centre of the impact to minimise corruption of the data from edge effects and survive the impact. A further requirement is that it should operate at a stand-off distance of ~ 8cm. For these reasons we chose to develop a pseudo con-focal intensity sensor, which demonstrated resolution comparable with conventional PVDF sensors combined with high survivability and low cost. A second sensor was developed based on 'Fibre Bragg Gratings' (FBG) which although requiring contact with the target the low weight and very small contact area had minimal effect on the dynamics of the target. The FBG was mounted either on the surface of the target or tangentially between a fixed location. The output signals from the FBG were interrogated in time by a new method. Measurements were made on composite and aluminium plates in the LGG and on low speed drop tests. The particle momentum for the drop tests was chosen to be similar to that of the particles used in the LGG.