Response of irrigated wheat cultivars to different nitrogen rates and sources

Altas produtividades de trigo requerem um bom manejo da adubação nitrogenada. O objetivo deste trabalho foi avaliar os efeitos de diferentes doses de nitrogênio na semeadura usando o Entec (fonte de N com inibidor de nitrificação), ou em cobertura, utilizando a ureia, em quatro cultivares de trigo. O experimento foi desenvolvido em área experimental pertencente à Faculdade de Engenharia de Ilha Solteira - UNESP, em um Latossolo Vermelho distrófico epieutrófico álico textura argilosa, o qual foi nativamente ocupado por vegetação de Cerrado. O delineamento estatístico foi o de blocos ao acaso, com quatro doses de N (0, 60, 120 e 180 kg ha-1) na semeadura, usando o Entec, ou em cobertura aos 40 dias (início do alongamento), empregando a ureia e os cultivares E 21, E 22, E 42 e IAC 370, em quatro repetições. Os cultivares de trigo mais produtivos foram o E 21 e o E 42. O cultivar E 22 apresentou maior altura de plantas e altas notas de acamamento, com consequente menor produtividade de grãos. Não houve diferença significativa entre o Entec (aplicado na semeadura) e a ureia (aplicada em cobertura) para produtividade de grãos e para nenhuma das outras avaliações, porém a ureia proporcionou maior teor de N foliar, e o Entec, maior número de espiguetas não desenvolvidas. O incremento das doses de N influenciou negativamente a massa hectolítrica, alterando assim a qualidade dos grãos de trigo. O N aumentou a produtividade de grãos de trigo até a dose de 82 kg ha-1 de N, usando Entec aplicado na semeadura ou ureia aplicada em cobertura.

An In Vitro Comparison of Different Cementation Strategies on the Pull-out Strength of a Glass Fiber Post

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Propriedades mecânicas e de corrosão de dois aços inoxidáveis austeníticos utilizados na fabricação de implantes ortopédicos

ASTM F 138 austenitic stainless steel is extensively used as an orthopedic implant material. However, some aspects, such as low strength in the annealed condition and susceptibility to localized corrosion, limit wider use of this kind of steel. Recently, a high-nitrogen austenitic stainless steel, specified in the standard ISO 5832-9, has been indicated as an alternative to ASTM F 138 steel for more severe loading and permanent application inside the human body. In this work, microstructure, mechanical properties, corrosion resistance and fatigue behavior of both steels were determined and compared. ISO 5832-9 steel displayed better mechanical and corrosion behaviors than did ASTM F 138 steel The combination of these features lead ISO steel to enhanced fatigue performance in both neutral and aggressive environments. Analyzed were the role of nitrogen in solid solution, combined with niobium in the Z-phase, and the factors that led to superior ISO 5832-9 properties.

Influence of shot peening on the fatigue strength of Custom 465 stainless steel for aeronautic application

This project was originated from the national aircraft industry requirements to reduce the use of coated materials with electroplated chromium or cadmium that produce waste, which is harmful to health or the environment. The selected material is a Custom 465 stainless steel used in the aeronautical field due to its high mechanical strength. Considering the load sustained by the wheel axis of the landing gear, the Custom 465 is tested in axial fatigue. The objective is to compare the behavior of the Custom 465 with plated AISI 4340 steel coated with cadmium. X-ray diffraction method was used to determine the residual stress field induced by shot peening.

Anelastic spectroscopy in Ti-13V-11Cr-3Al alloy

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Diffusion of oxygen in some binary Ti-Based alloys used as biomaterials

Ti and its alloys are widely used as biomaterials. Their main properties are excellent corrosion resistance, relatively low elastic modulus, high specific strength, and good biocompatibility. The development of new Ti alloys with properties favorable for use in the human body is desired. To this end, Ti alloys with Mo, Nb, Zr, and Ta are being developed, because these elements do not cause cytotoxicity. The presence of interstitial elements (such as oxygen and nitrogen) induces strong changes in the elastic properties of the material, which leads to hardening or softening of the alloy. By means of anelastic spectroscopy, we are able to obtain information on the diffusion of these interstitial elements present in the crystalline lattice. In this paper, the effect of oxygen on the anelastic properties of some binary Ti-based alloys was analyzed with anelastic spectroscopy. The diffusion coefficients, pre-exponential factors, and activation energies were calculated for oxygen and nitrogen in these alloys.

Effects of a combined aerobic and strength training program in youth patients with acute lymphoblastic leukemia

Cure rates of youth with Acute Lymphoblastic Leukemia (ALL) have increased in the past decades, but survivor's quality of life and physical fitness has become a growing concern. Although previous reports showed that resistance training is feasible and effective, we hypothesized that a more intense exercise program would also be feasible, but more beneficial than low- to moderate-intensity training programs. We aimed to examine the effects of an exercise program combining high-intensity resistance exercises and moderate-intensity aerobic exercises in young patients undergoing treatment for ALL. A quasi-experimental study was conducted. The patients (n = 6; 5-16 years of age) underwent a 12-week intra-hospital training program involving high-intensity strength exercises and aerobic exercise at 70% of the peak oxygen consumption. At baseline and after 12 weeks, we assessed sub-maximal strength (10 repetition-maximum), quality of life and possible adverse effects. A significant improvement was observed in the sub maximal strength for bench press (71%), lat pull down (50%), leg press (73%) and leg extension (64%) as a result of the training (p < 0.01). The parents' evaluations of their children's quality of life revealed an improvement in fatigue and general quality of life, but the children's self-reported quality of life was not changed. No adverse effects occurred. A 12-week in-hospital training program including high-intensity resistance exercises promotes marked strength improvements in patients during the maintenance phase of the treatment for Acute Lymphoblastic Leukemia without side-effects. Parents' evaluations of their children revealed an improvement in the quality of life.

The relationship between leaf nitrogen, nitrogen metabolites and herbivory in two species of Nyctaginaceae from the Brazilian Cerrado

Guapira graciliflora and Neea theifera are taxonomically related species of the tribe Pisoneae. Both species are found in the same environment, the Brazilian Cerrado, and therefore, are subjected to similar selective pressures. These species occur in oligotrophic environments, yet contain high concentrations of nitrogen in their leaves. The present study was carried out to investigate the ecological role of nitrogen in herbivory on these species. The differences in the N content, compositions of secondary N-metabolites, mechanical resistance, and water content between their leaves indicate that these species have different adaptations as defense mechanisms. In both species, their high nitrogen content seems to promote herbivory. The presence of secondary nitrogen metabolites does not prevent the species from suffering intense damage by herbivores on their early leaves. The herbivory rates observed were lower for mature leaves of both species than for young leaves. In G. graciliflora, nutritional content and leaf hardness are the most important variables correlated with reduction of herbivory rates, whereas in N. theifera, N compounds are also correlated with herbivory rates. Despite the differences in the strategies of these two species, they exhibit a similar efficiency of protection against natural enemies because their total herbivory rates are similar. The difference in their N defense allocation may imply benefits for survival under Cerrado conditions. We briefly discuss the oligotrophic habitat conditions of the studied plants and possible advantages of their strategies of N accumulation and metabolic uses. (C) 2011 Elsevier B.V. All rights reserved.

Flexural strengthening of reinforced concrete beams with carbon fibers reinforced polymer (CFRP) sheet bonded to a transition layer of high performance cement-based composite

Resistance to corrosion, high tensile strength, low weight, easiness and rapidity of application, are characteristics that have contributed to the spread of the strengthening technique characterized by bonding of carbon fibers reinforced polymer (CFRP). This research aimed to develop an innovate strengthening method for RC beams, based on a high performance cement-based composite of steel fibers (macro + microfibers) to be applied as a transition layer. The purpose of this transition layer is better control the cracking of concrete and detain or even avoid premature debonding of strengthening. A preliminary study in short beams molded with steel fibers and strengthened with CFRP sheet, was carried out where was verified that the conception of the transition layer is valid. Tests were developed to get a cement-based composite with adequate characteristics to constitute the layer transition. Results showed the possibility to develop a high performance material with a pseudo strain-hardening behavior, high strength and fracture toughness. The application of the strengthening on the transition layer surface had significantly to improve the performance levels of the strengthened beam. It summary, it was proven the efficiency of the new strengthening technique, and much information can be used as criteria of projects for repaired and strengthened structures.

Application of ultra high performance concrete (UHPC) as a thin-bonded overlay for concrete bridge decks

As transportation infrastructure across the globe approaches the end of its service life, new innovative materials and applications are needed to sustainably repair and prevent damage to these structures. Bridge structures in the United States in particular are at risk as a large percentage will be reaching their design service lives in the coming decades. Superstructure deterioration occurs due to a variety of factors, but a major contributor comes in the form of deteriorating concrete bridge decks. Within a concrete bridge deck system, deterioration mechanisms can include spalling, delaminations, scaling from unsuitable material selection, freeze-thaw damage, and corrosion of reinforcing steel due to infiltration of chloride ions and moisture. This thesis presents findings pertaining to the feasibility of using UHPC as a thin-bonded overlay on concrete bridge decks, specifically in precast bridge deck applications where construction duration and traffic interruption can be minimized, as well as in cast-in-place field applications. UHPC has several properties that make it a desirable material for this application. These properties include post-cracking tensile capacity, high compressive strength, high resistance to environmental and chemical attack, negligible permeability, negligible dry shrinkage when thermally cured, and the ability to self consolidate. The compatibility of this bridge deck overlay system was determined to minimize overlay thickness and dead load without sacrificing bond integrity or lose of protective capabilities. A parametric analysis was conducted using a 3D finite element model of a simply supported bridge under HS-20 truck and overload. Experimental tests were conducted to determine the net effect of UHPC volume change due to restrained shrinkage and tensile creep relaxation. The combined effects from numerical models and test results were then considered in determining the optimum overlay thickness for cast-in-place and precast applications.

AN ASSESSMENT OF BALLAST SOURCE'S QUALITY AND LOCATIONS WITH RESPECT TO MDOT'S UPGRADE OF THE WOLVERINE RAILROAD LINE FOR HIGH SPEED RAIL USEAGE

The Michigan Department of Transportation is evaluating upgrading their portion of the Wolverine Line between Chicago and Detroit to accommodate high speed rail. This will entail upgrading the track to allow trains to run at speeds in excess of 110 miles per hour (mph). An important component of this upgrade will be to assess the requirement for ballast material for high speed rail. In the event that the existing ballast materials do not meet specifications for higher speed train, additional ballast will be required. The purpose of this study, therefore, is to investigate the current MDOT railroad ballast quality specifications and compare them to both the national and international specifications for use on high speed rail lines. The study found that while MDOT has quality specifications for railroad ballast it does not have any for high speed rail. In addition, the American Railway Engineering and Maintenance-of-Way Association (AREMA), while also having specifications for railroad ballast, does not have specific specifications for high speed rail lines. The AREMA aggregate specifications for ballast include the following tests: (1) LA Abrasion, (2) Percent Moisture Absorption, (3) Flat and Elongated Particles, (4) Sulfate Soundness test. Internationally, some countries do require a highly standard for high speed rail such as the Los Angeles (LA) Abrasion test, which is uses a higher standard performance and the Micro Duval test, which is used to determine the maximum speed that a high speed can operate at. Since there are no existing MDOT ballast specification for high speed rail, it is assumed that aggregate ballast specifications for the Wolverine Line will use the higher international specifications. The Wolverine line, however, is located in southern Michigan is a region of sedimentary rocks which generally do not meet the existing MDOT ballast specifications. The investigation found that there were only 12 quarries in the Michigan that meet the MDOT specification. Of these 12 quarries, six were igneous or metamorphic rock quarries, while six were carbonate quarries. Of the six carbonate quarries four were locate in the Lower Peninsula and two in the Upper Peninsula. Two of the carbonate quarries were located in near proximity to the Wolverine Line, while the remaining quarries were at a significant haulage distance. In either case, the cost of haulage becomes an important consideration. In this regard, four of the quarries were located with lake terminals allowing water transportation to down state ports. The Upper Peninsula also has a significant amount of metal based mining in both igneous and metamorphic rock that generate significant amount of waste rock that could be used as a ballast material. The main drawback, however, is the distance to the Wolverine rail line. One potential source is the Cliffs Natural Resources that operates two large surface mines in the Marquette area with rail and water transportation to both Lake Superior and Lake Michigan. Both mines mine rock with a very high compressive strength far in excess of most ballast materials used in the United States and would make an excellent ballast materials. Discussions with Cliffs, however, indicated that due to environmental concerns that they would most likely not be interested in producing a ballast material. In the United States carbonate aggregates, while used for ballast, many times don't meet the ballast specifications in addition to the problem of particle degradation that can lead to fouling and cementation issues. Thus, many carbonate aggregate quarries in close proximity to railroads are not used. Since Michigan has a significant amount of carbonate quarries, the research also investigated using the dynamic properties of aggregate as a possible additional test for aggregate ballast quality. The dynamic strength of a material can be assessed using a split Hopkinson Pressure Bar (SHPB). The SHPB has been traditionally used to assess the dynamic properties of metal but over the past 20 years it is now being used to assess the dynamic properties of brittle materials such as ceramics and rock. In addition, the wear properties of metals have been related to their dynamic properties. Wear or breakdown of railroad ballast materials is one of the main problems with ballast material due to the dynamic loading generated by trains and which will be significantly higher for high speed rails. Previous research has indicated that the Port Inland quarry along Lake Michigan in the Southern Upper Peninsula has significant dynamic properties that might make it potentially useable as an aggregate for high speed rail. The dynamic strength testing conducted in this research indicate that the Port Inland limestone in fact has a dynamic strength close to igneous rocks and much higher than other carbonate rocks in the Great Lakes region. It is recommended that further research be conducted to investigate the Port Inland limestone as a high speed ballast material.

Major and trace element compositions of the Buendnerschiefer samples

The Bündnerschiefer of the Swiss-Italian Alps is a large sedimentary complex deposited on the Piemonte-Liguria and Valais oceans and associated continental margins from the upper Jurassic to Eocene. It is made of a large variety of sequences associated or not with an ophiolitic basement. The Bündnerschiefer makes an accretionary prism that developed syn-tectonically from the onset of alpine subduction, and it records orogenic metamorphism following episodes of HP metamorphism. The Bündnerschiefer shares important similarities with the Otago schists of New Zealand and with the Wepawaug schists of Connecticut, both of which form accretionary prisms and have an orogenic metamorphic imprint. With the aim of testing the hypothesis of mobility of chemical components as a function of metamorphic grade, in this work I present fifty-five bulk chemical analyses of various lithological facies of the Bündnerschiefer collected along the well-studied field gradient of the Lepontine dome of Central Switzerland, in the Prättigau half window of East Switzerland, and in the Tsaté Nappe of Valle d'Aosta (Italy). The dataset includes the concentration of major components, large ion lithophile elements (Rb, Sr, Ba, Cs), high field strength elements (Zr, Ti, Nb, Th, U, Ta, Hf), fluid-mobile light elements (B, Li), volatiles (CO2, S), REEs, and Y, V, Cr, Co, Sn, Pb, Cu, Zn, Tl, Sb, Be, and Au. These data are compared against the compositions of the global marine sediment reservoir, typical crustal reservoirs, and against the previously measured compositions of Otago and Wepawaug schists. Results reveal that, irrespective of their metamorphic evolution, the bulk chemical compositions of orogenic metasediments are characterized by mostly constant compositional ratios (e.g., K2O/Al2O3, Ba/Al2O3, Sr/CaO, etc.), whose values in most cases are undistinguishable from those of actual marine sediments and other crustal reservoirs. For these rocks, only volatile concentrations decrease dramatically as a function of metamorphic temperature, and significant deviations from the reservoir signatures are evident for SiO2, B, and Li. These results are interpreted as an indication of residual enrichment in the sediments, a process taking place during syn-metamorphic dehydration from the onset of metamorphism in a regime of chemical immobility. Residual enrichment increased the absolute concentrations of the chemical components of these rocks, but did not modify significantly their fundamental ratios. This poor compositional modification of the sediments indicates that orogenic metamorphism in general does not promote significant mass transfer from accretionary prisms. In contrast, mass transfer calculations carried out in a shear zone crosscutting the Bündnerschiefer shows that significant mass transfer occurs within these narrow zones, resulting in gains of H2O, SiO2, Al2O3, K2O, Ba, Y, Rb, Cu, V, Tl, Mo, and Ce during deformation and loss of Na2O, CO2, S, Ni, B, U, and Pb from the rock. These components were presumably transported by an aquo-carbonic fluid along the shear zone. These distinct attitudes to mobilize chemical elements from orogenic sediments may have implications for a potentially large number of geochemical processes in active continental margins, from the recycling of chemical components at plate margins to the genesis of hydrothermal ore deposits.

Chemical and mineral compositions of altered peridotites from ODP Leg 209

Abyssal peridotite from the 15°20'N area of the Mid-Atlantic Ridge show complex geochemical variations among the different sites drilled during ODP Leg 209. Major element compositions indicate variable degrees of melt depletion and refertilization as well as local hydrothermal metasomatism. Strongest evidence for melt-rock interactions are correlated Light Rare Earth Element (LREE) and High Field Strength Element (HFSE) additions at Sites 1270 and 1271. In contrast, hydrothermal alteration at Sites 1274, 1272, and 1268 causes LREE mobility associated with minor HFSE variability, reflecting the low solubility of HFSE in aqueous solutions. Site 1274 contains the least-altered, highly refractory, peridotite with strong depletion in LREE and shows a gradual increase in the intensity of isochemical serpentinization; except for the addition of H2O which causes a mass gain of up to 20 g/100 g. The formation of magnetite is reflected in decreasing Fe(2+)/Fe(3+) ratios. This style of alteration is referred to as rock-dominated serpentinization. In contrast, fluid-dominated serpentinization at Site 1268 is characterized by gains in sulfur and development of U-shaped REE pattern with strong positive Eu anomalies which are also characteristic for hot (350 to 400°C) vent-type fluids discharging from black smoker fields. Serpentinites at Site 1268 were overprinted by talc alteration under static conditions due to interaction with high a_SiO2 fluids causing the development of smooth, LREE enriched patterns with pronounced negative Eu anomalies. These results show that hydrothermal fluid-peridotite and fluid-serpentinite interaction processes are an important factor regarding the budget of exchange processes between the lithosphere and the hydrosphere in slow spreading environments.

Effects of N fertilisation, year and prolamin alleles on guten quality in durum wheat (Triticum turgidum L. ssp. turgidum) landraces from Spain

A subset of durum wheat Spanish landraces, previously evaluated for yield at low and high nitrogen (N) levels, was analysed for quality, protein content (P) and sodium dodecyl sulphate sedimentation (SDSS) test. The evaluation was carried out at the two N rates and in two years. The influence of prolamin alleles at the Glu-1, Glu-3, Glu-B2 and Gli-1 loci on quality parameters was also studied. The non significant Variety-by-Year or Variety-by-N interactions suggested that year and N affected all the varieties in a similar manner. Year and N effects were larger than variety effect for P, which increased with N. In contrast, variety genotype exhibited a stronger influence on SDSS test, which was not affected by year and fertilizer. Variety effects on P did not reflect the variety differences for SDSS test. A high positive influence of some prolamin alleles on quality parameters was detected, mainly for SDSS values. No correlation between yield and P was detected in the landraces adapted to low N. Based on the results of yield and quality evaluations, four landraces with high yield and high gluten strength were pre-selected for low N production.

Uso de marcadores moleculares para la racionalización y evaluación de la calidad en las colecciones de Recursos Fitogenéticos de trigo

Esta tesis tiene dos objetivos generales: el primero, analizar el uso de proteínas del endospermo y SSRs para la racionalización de las colecciones de trigo, y el segundo, estudiar la influencia de las proteínas del endospermo, del año de cultivo y del abonado nitrogenado en la calidad en un grupo de variedades locales españolas. Dentro del primer objetivo, se estudió la diversidad genética de la colección de Triticum monococcum L. (escaña menor), y de una muestra de la colección de Triticum turgidum L. (trigo duro) del CRF-INIA, con 2 y 6 loci de gliadinas, y 6 y 24 SSRs, para la escaña menor y el trigo duro, respectivamente. Ambas colecciones presentaron una gran diversidad genética, con una gran diferenciación entre las variedades y pequeña dentro de ellas. Los loci de gliadinas mostraron una gran variabilidad, siendo los loci Gli-2 los más útiles para distinguir variedades. En la escaña menor, las gliadinas presentaron mayor poder de discriminación que los SSRs; aunque en trigo duro los SSRs identificaron más genotipos. El número de alelos encontrado fue alto; 24 y 38 en gliadinas, y 29 y 203 en SSRs, en escaña menor y trigo duro, respectivamente. En trigo duro, se identificaron 17 alelos nuevos de gliadinas lo que demuestra que el germoplasma español es muy singular. En ambas especies, se detectaron asociaciones entre la variación alélica en prolaminas y el origen geográfico y filogenético de las variedades. La utilidad de las proteínas (6 loci de gliadinas, 2 loci de gluteninas y proteína total) y de los SSRs (24 loci) para verificar duplicados, y analizar la variabilidad intraaccesión, se estudió en 23 casos de duplicados potenciales de trigo duro. Los resultados indicaron que tanto los biotipos como las accesiones duplicadas mostraban el mismo genotipo en gliadinas, pocas diferencias o ninguna en las subunidades de gluteninas HMW y proteína total, y diferencias en menos de tres loci de SSRs. El mismo resultado se obtuvo para los biotipos de la colección de T. monococcum. Sin embargo, las discrepancias observadas en algunos casos entre proteínas y SSRs demostraron la utilidad del uso conjunto de ambos tipos de marcadores. Tanto las proteínas como los SSRs mostraron gran concordancia con los caracteres agro-morfológicos, especialmente cuando las diferencias entre los genotipos eran grandes. Sin embargo, los caracteres agro-morfológicos fueron menos discriminantes que los marcadores moleculares. Para el segundo objetivo de la tesis, se analizó la variación alélica en siete loci de prolaminas relacionados con la calidad en trigo duro: Glu-A1 y Glu-B1 de gluteninas HMW, Glu-A3, Glu-B3 y Glu-B2 de gluteninas B-LMW, y Gli-A1 y Gli-B1 de gliadinas. La submuestra analizada incluía variedades locales de todas las provincias españolas donde se ha cultivado tradicionalmente el trigo duro. Todos los loci, excepto el Glu-B2, mostraron gran variabilidad genética, siendo los Glu-3 los más polimórficos. En total, se identificaron 65 alelos, de los que 29 eran nuevos, que representan una fuente importante de variabilidad genética para la mejora de la calidad. Se detectaron diferencias en la composición en prolaminas entre la convar. turgidum y la zona norte, y la convar. durum y la zona sur; el genotipo Glu-B3new-1 - Gli-B1new-1 fue muy común en la convar. turgidum, mientras que el Glu-B3a - Gli-B1c, asociado con mejor calidad, fue más frecuente en la convar. durum. En la convar. turgidum, se observó mayor variabilidad que en la convar. durum, principalmente en los loci Glu-B1 y Glu-B3, lo que indica que esta convariedad puede ser una fuente valiosa de nuevos alelos de gluteninas. Esta submuestra fue evaluada para calidad (contenido en proteína, P, y test de sedimentación, SDSS) con dos dosis de abonado nitrogenado (N), y en dos años diferentes. No se detectaron interacciones Variedad × Año, ni Variedad × N en la calidad. Para la P, los efectos ambientales (año y N) fueron mayores que el efecto de la variedad, siendo, en general, mayor la P con dosis altas de N. La variedad influyó más en el test SDSS, que no se vio afectado por el año ni el N. El aumento del contenido en proteína no influyó significativamente sobre la fuerza del gluten estimada con el SDSS. Respecto a la influencia de las prolaminas en la fuerza del gluten, se confirmó la superioridad del Glu-B3a; aunque también se detectó una influencia alta y positiva de los alelos nuevos Glu-A3new-1, y Glu-B3new-6 y new-9. La no correlación entre el rendimiento (evaluado en un trabajo anterior) y la P, en las variedades adaptadas a bajo N, permitió seleccionar cuatro variedades locales con alto rendimiento y buena fuerza del gluten para producción con bajo N. SUMMARY There are two main objectives in this thesis: The first, to analyse the use of endosperm proteins and SSRs to rationalize the wheat collections, and the second, to study the influence on quality of endosperm proteins, year and nitrogen fertilization in a group of Spanish landraces. For the first objective, we studied the genetic diversity of the collection of Triticum monococcum L. (cultivated einkorn), and of a sample of the collection of Triticum turgidum L. (durum wheat) maintained at the CRF-INIA. Two and 6 gliadin loci, and 6 and 24 SSRs, were used for einkorn and durum wheat, respectively. Both collections possessed a high genetic diversity, being the differentiation large between varieties and small within them. Gliadin loci showed great variability, being the loci Gli-2 the most useful for distinguish among varieties. In einkorn, the gliadins showed higher discrimination power than SSRs; although SSRs identified more genotypes in durum wheat. Large number of alleles were found; 24 and 38 in gliadins, and 29 and 203 in SSRs, for einkorn and durum wheat, respectively. In durum wheat, 17 new alleles of gliadins were identified, which indicate that Spanish durum wheat germplasm is rather unique. Some associations between prolamin alleles and geographical and phylogenetic origin of varieties were found in both species. The value of endosperm proteins (6 gliadin loci, 2 glutenin loci and total protein) and SSRs (24 loci) for validation of duplicates, and monitoring the intra-accession variability, was studied in 23 potential duplicates of durum wheat. The results indicated that biotypes and duplicated accessions showed identical gliadin genotype, few or none differences in HMW glutenin subunits and total protein, and less than three different SSR loci. A similar result was obtained for biotypes of T. monococcum. However, the discrepancies in some cases support the convenience to use together both marker systems. A good concordance among endosperm proteins, agro-morphological traits and SSRs were also found, mainly when differences between genotypes were high. However, agro-morphological traits discriminated less between accessions than molecular markers. For the second objective of the thesis, we analysed the allelic variation at seven prolamin loci, involved in durum wheat quality: Glu-A1 and Glu-B1 of HMW glutenin, Glu-A3, Glu-B3 and Glu-B2 of B-LMW glutenin, and Gli-A1 and Gli-B1 of gliadin. The subsample analysed included landraces from all the Spanish provinces where the crop was traditionally cultivated. All the loci, except for Glu-B2, showed high genetic variability, being Glu-3 the most polymorphic. A total of 65 alleles were studied, 29 of them being new, which represent an important source of variability for quality improvement. Differences in prolamin composition were detected between convar. turgidum and the North zone, and the convar. durum and the South zone; the genotype Glu-B3new-1 - Gli-B1new-1 was very common in the convar. turgidum, while the Glu- B3a - Gli-B1c, associated with better quality, was more frequent in the convar. durum. Higher variability was detected in the convar. turgidum than in the convar. durum, mainly at the Glu-B1 and Glu-B3, showing that this convariety could be a valuable source of new glutenin alleles. The subsample was evaluated for quality (protein content, P, and sedimentation test, SDSS) with two doses of nitrogen fertiliser (N), and in two different years. No significant Variety x Year or Variety x Nitrogen interactions were detected. For P, environmental (year and N) effects were higher than variety effect, being P values , in general, larger with high dose of N. The variety exhibited a strong influence on SDSS test, which was not affected by year and N. Increasing values of P did not significantly influence on gluten strength, estimated with the SDSS. Respect to the prolamin effects on gluten strength, the superiority of Glu-B3a was confirmed; although a high positive effect of the new alleles Glu-A3new-1, and Glu-B3new-6 and new-9 was also detected. The no correlation between yield (evaluated in a previous research) and P, in the landraces adapted to low N, allowed to select four landraces with high yield and high gluten strength for low N production.