Melanoma and Satellite Blue Papule

The colors that are seen in dermoscopy depend on the anatomic level of the skin at which the chromophores are seen. Blue color can be found in a variety of melanocytic and nonmelanocytic lesions. An 89-year-old man presented with a 3-year history of a slow-growing, hyperpigmented patch located on the distal third of the right arm. Dermoscopy showed an atypical network, irregularly distributed globules, pigmented internal streaks and a milky-red area. Based on these findings a diagnosis of slow-growing malignant melanoma was made. Simultaneously, a well-defined blue papule was seen on the proximal third of the same arm. Dermoscopy disclosed a homogeneous blue pattern. After clinical and dermoscopic correlation our differential diagnosis for this blue lesion included cutaneous melanoma metastasis, blue nevus and foreign body reaction. The patient recalled its onset 75 years ago after a grenade explosion. We also discuss the blue lesion appearance under reflectance confocal microscopy and high-definition optical coherence tomography. Histopathological examination after excision of the hyperpigmented patch and blue papule revealed a melanoma in situ and a foreign body reaction, respectively. The diagnostic evaluation of a blue lesion should always rely on the integration of all data, especially clinical and dermoscopic features. Other non-invasive techniques, like reflectance confocal microscopy and high-definition optical coherence tomography can also be important aids for its differential diagnosis.

Estudo de materiais fibrosos para aplicação em modelos cerebrais

Neste trabalho, multifilamentos ocos de polipropileno foram estudados com o objetivo de construir um fantoma cerebral adequado à validação e controlo de qualidade de uma modalidade de imagem clínica inovadora: High-Definition Fiber Tractography. Foram investigadas e discutidas a análise à secção transversal e a redução da área de multifilamentos ocos de polipropileno, através de estiramento. De acordo com os resultados experimentais, a dimensão da secção transversal dos multifilamentos é proporcional à massa linear dos mesmos, existindo uma irregularidade, relativamente, à forma deste tipo de materiais.

Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Endovascular thoracic aortic aneurysm repair without angiography.

OBJECTIVE: : Intravascular ultrasound (IVUS) generates high definition circumferential cross-sectional images and provides real-time readout of vascular dimensions, including visualization of vessel branches. We have used it as an alternative to angiography in the endovascular thoracic aneurysm repair work-up. METHODS: : Out of consecutive 203 patients with descending thoracic aortic aneurysm, 89 (43.8%) received endovascular treatment [mean age, 68 ± 8 years; range, 29-82; male, 79 (88.7%); female, 10 (11.3%)] without using angiography during the endovascular procedure. IVUS (6 F, 12.5 MHz probe or 10 F 9 MHz) coupled with fluoroscopy for the placement of radiopaque markers was used for target site identification, landing zone measurement, device positioning, and assessment of endovascular repair. RESULTS: : Hospital mortality was 4/89 (4.5%). Number of devices implanted in each patient was 1.2 (range, 1-3). X-ray exposure time was 12 ± 8 minutes. Median procedure time was 63 ± 20 minutes. Conversion to open surgery was necessary in one patient (1.1%) because of aortic dissection. In nine patients (10.1%) left subclavian artery was covered because of a short neck. Two patients (2.2%) had vascular access lesions and required surgical repair. One patient developed paraplegia (1.1%). Early endoleak was observed in eight patients (8.9%) and 4 (4.5%) required additional procedures (proximal or distal extensions). Late conversion was necessary in one patient (1.1%). CONCLUSIONS: : IVUS provides all information necessary for device selection, target site identification as well as safe and correct deployment of thoracic endoprostheses and makes periprocedural angiography unnecessary, thus avoiding the risk of renal failure because of contrast medium.

Creació d'un media center amb software lliure

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. L’objectiu d’aquest treball de recerca és la creació d’un dispositiu encarregat de centralitzar totes les necessitats multimèdia de casa nostra i distribuir aquest contingut a tots els terminals de la xarxa local d’una manera senzilla i automatitzada. Aquest dispositiu s’ha dissenyat per estar connectat a una televisió d’alta definició, que permetrà la reproducció i l’organització de tot el nostre multimèdia d’una manera còmoda i fàcil. El media center s’encarrega de gestionar la nostra filmoteca, fototeca, biblioteca musical i sèries de TV de manera transparent i automàtica. A més a més, l’usuari pot accedir a tot el multimèdia emmagatzemat al media center des de qualsevol dispositiu de la xarxa local a través de protocols com CIFS o UPnP, en un intent de replicar el cloud computing a escala local. El dispositiu ha estat dissenyat per a suportar tot tipus de formats i subtítols, assegurant la compatibilitat total amb arxius lliures de DRM. El seu disseny minimalista i silenciós el fa perfecte per a substituir el reproductor de DVD de la sala. Tot això sense oblidar el seu baix consum, de l’ordre d’un 75% inferior al d’un PC convencional.

Construcció d'un HTPC basat en programari lliure

Els avenços tecnològics en els camps de la informàtica i l'entreteniment ha evolucionatmolt ràpidament els darrers anys.Els ordinadors han augmentat la seva potència, han anat adquirint capacitats multimèdia i han arribat al punt de poder reproduir tranquil·lament els nous formats d'alta definició.El televisors i reproductors han passat un procés de sofisticació, el qual els ha dotat de noves característiques, com el teletext, el suport per les funcionalitats de la tdt i capacitat per reproduir formats provinents del àmbit informàtic.Per tant no seria estrany que tots dos mons acabin convergint, de manera que puguemdotar el menjador de casa amb les capacitats que han estat exclusives del món informàtic.Amb el temps han anat apareixent solucions que pretenien cobrir aquestes necessitats,amb més o menys èxit, però amb diversos inconvenients, ja que no deixaven de ser unpedaç sobre un aparell "tradicional".La finalitat d'aquest projecte és la de construir un HTPC (Home Theater PC), és a dir, un equip informàtic dotat de capacitats multimèdia i adequat per manipular des del sofà de casa nostra.Per acomplir aquesta finalitat primer haurem d'adquirir el maquinari. D'entrada el htpc ensí haurà de ser de mides reduïdes i silenciós, haurà de disposar de sortides vga, dvi i hdmi, i a més, ser capaç de reproduir formats d'alta definició sense cap complicació. El control d'aquest s'haurà de realitzar mitjançant algun dispositiu que no requereixi una superfície plana.A continuació caldrà escollir el programari amb el qual anirà equipat, per tant, haurem de triar alguna distribució de GNU/Linux, instal·lar-hi l'entorn d'escriptori KDE4, i la resta de programari específic com el navegador, correu electrònic, reproducció multimèdia, etc.El productes resultant serà un HTPC, que tal com hem dit, el podrem utilitzar des delssofàs de casa nostra de forma còmode i fàcil.

Increased carotid intima-media thickness in the absence of atherosclerotic plaques in an adult population with Fabry disease.

AIM: Fabry disease is considered primarily as a progressive small vessel disease, with ischaemic degenerative lesions involving the kidneys, brain and heart. Macrovascular involvement in male patients includes an accelerated wall hypertrophy of the radial artery and a thickening of the intima-media of the common carotid artery. The aim of this study is to evaluate the prevalence and severity of carotid artery atherosclerosis in hemizygous and heterozygous patients with Fabry disease, compared with a matched control population. METHODS: The common carotid artery intima-media thickness (IMT) of 53 patients with Fabry disease (24 men, 29 women) was measured by high-definition ultrasonography, and the presence or absence of atherosclerotic plaques reported. Results were compared with those of 120 age-matched healthy individuals (83 men, 37 women). RESULTS: The common carotid artery IMT was increased to the same extent in male and female patients with Fabry disease (706+/-211 microm and 749+/-395 microm, respectively) compared with that of the control population (614+/-113 microm). In the Fabry population, IMT did not correlate with either systolic blood pressure or with renal function (plasma creatinine). In the control population, only systolic blood pressure was positively and significantly correlated with IMT. Atherosclerotic plaques in the common carotid artery were not observed in any patient with Fabry disease, whereas 34% of the control population had carotid artery plaques, as evidenced by focal non-homogeneous intima-media thickening greater than 1.2 mm. CONCLUSION: This study presents evidence of a major increase in common carotid artery IMT, both in hemizygous and heterozygous patients with Fabry disease, in the absence of focal atherosclerotic plaques. These results suggest that the conduit arteries may be protected from atherosclerosis in Fabry disease.

Dosimetric comparison of different treatment modalities for stereotactic radiosurgery of arteriovenous malformations and acoustic neuromas.

PURPOSE: We investigated the influence of beam modulation on treatment planning by comparing four available stereotactic radiosurgery (SRS) modalities: Gamma-Knife-Perfexion, Novalis-Tx Dynamic-Conformal-Arc (DCA) and Dynamic-Multileaf-Collimation-Intensity-Modulated-radiotherapy (DMLC-IMRT), and Cyberknife. MATERIAL AND METHODS: Patients with arteriovenous malformation (n = 10) or acoustic neuromas (n = 5) were planned with different treatment modalities. Paddick conformity index (CI), dose heterogeneity (DH), gradient index (GI) and beam-on time were used as dosimetric indices. RESULTS: Gamma-Knife-Perfexion can achieve high degree of conformity (CI = 0.77 ± 0.04) with limited low-doses (GI = 2.59 ± 0.10) surrounding the inhomogeneous dose distribution (D(H) = 0.84 ± 0.05) at the cost of treatment time (68.1 min ± 27.5). Novalis-Tx-DCA improved this inhomogeneity (D(H) = 0.30 ± 0.03) and treatment time (16.8 min ± 2.2) at the cost of conformity (CI = 0.66 ± 0.04) and Novalis-TX-DMLC-IMRT improved the DCA CI (CI = 0.68 ± 0.04) and inhomogeneity (D(H) = 0.18 ± 0.05) at the cost of low-doses (GI = 3.94 ± 0.92) and treatment time (21.7 min ± 3.4) (p<0.01). Cyberknife achieved comparable conformity (CI = 0.77 ± 0.06) at the cost of low-doses (GI = 3.48 ± 0.47) surrounding the homogeneous (D(H) = 0.22 ± 0.02) dose distribution and treatment time (28.4min±8.1) (p<0.01). CONCLUSIONS: Gamma-Knife-Perfexion will comply with all SRS constraints (high conformity while minimizing low-dose spread). Multiple focal entries (Gamma-Knife-Perfexion and Cyberknife) will achieve better conformity than High-Definition-MLC of Novalis-Tx at the cost of treatment time. Non-isocentric beams (Cyberknife) or IMRT-beams (Novalis-Tx-DMLC-IMRT) will spread more low-dose than multiple isocenters (Gamma-Knife-Perfexion) or dynamic arcs (Novalis-Tx-DCA). Inverse planning and modulated fluences (Novalis-Tx-DMLC-IMRT and CyberKnife) will deliver the most homogeneous treatment. Furthermore, Linac-based systems (Novalis and Cyberknife) can perform image verification at the time of treatment delivery.

Fourier-based registration for robust forward-looking sonar mosaicing in low-visibility underwater environments

Vehicle operations in underwater environments are often compromised by poor visibility conditions. For instance, the perception range of optical devices is heavily constrained in turbid waters, thus complicating navigation and mapping tasks in environments such as harbors, bays, or rivers. A new generation of high-definition forward-looking sonars providing acoustic imagery at high frame rates has recently emerged as a promising alternative for working under these challenging conditions. However, the characteristics of the sonar data introduce difficulties in image registration, a key step in mosaicing and motion estimation applications. In this work, we propose the use of a Fourier-based registration technique capable of handling the low resolution, noise, and artifacts associated with sonar image formation. When compared to a state-of-the art region-based technique, our approach shows superior performance in the alignment of both consecutive and nonconsecutive views as well as higher robustness in featureless environments. The method is used to compute pose constraints between sonar frames that, integrated inside a global alignment framework, enable the rendering of consistent acoustic mosaics with high detail and increased resolution. An extensive experimental section is reported showing results in relevant field applications, such as ship hull inspection and harbor mapping

Supermatrix-hankkeen vahvuudet, heikkoudet, mahdollisuudet ja uhat

Supermatrix on Finnet-liitto ry:n jäsenyritysten hanke, joka tuo nopeiden valokuituyhteyksien avulla erilaisia sähköisiä palveluita kuluttajien koteihin ja yritysten toimipisteisiin. Näitä palveluita ovat mm. virtualisoidut henkilö-kohtaiset tietokoneet, tiedon tallennuspalvelut ja multimediasisältö, kuten teräväpiirtotelevisio. Tässä diplomityössä arvioidaan Supermatrixin palveluiden toteutumis-mahdollisuuksia sekä teknologian, että markkinoiden kannalta. Työn tarkoituksena oli myös laskea virtualisoitujen tietokoneiden avulla tuotetun työpöytäpalvelun tuotantokustannus. Kustannuslaskentaa varten testattiin useiden valmistajien teknologioita, ja parhaimmista vaihtoehdoista laskettiin tuotantokustannukset. Tulevia Supermatrix-operaattoreita varten kehitettiin työkalu, jolla työpöytäpalvelun vaatimien investointien kannattavuus saadaan nopeasti selville. Tuotantohintojen laskelmat osoittavat, että työpöytäpalvelua on taloudelli-sesti mahdollista tuottaa luomaan lisäarvoa nopeille laajakaistayhteyksille. Yrityksissä työpöytien virtualisointi on jo tämän päivän teknologiaa, mutta kuluttaja-asiakkaiden innostuminen palvelusta vaatii uuden markkinan luomisen. Uhkana on, että kuluttajien ostokäyttäytymisen muuttaminen ei onnistu, koska Supermatrix ei tuota fyysisen tuotteen ostamisen tarjoamaa mielihyvää.

Optical coherence tomography imaging of the basal ganglia: feasibility and brief review

Optical coherence tomography (OCT) is a promising medical imaging technique that uses light to capture real-time cross-sectional images from biological tissues in micrometer resolution. Commercially available optical coherence tomography systems are employed in diverse applications, including art conservation and diagnostic medicine, notably in cardiology and ophthalmology. Application of this technology in the brain may enable distinction between white matter and gray matter, and obtainment of detailed images from within the encephalon. We present, herein, the in vivo implementation of OCT imaging in the rat brain striatum. For this, two male 60-day-old rats (Rattus norvegicus, Albinus variation, Wistar) were stereotactically implanted with guide cannulas into the striatum to guide a 2.7-French diameter high-definition OCT imaging catheter (Dragonfly™, St. Jude Medical, USA). Obtained images were compared with corresponding histologically stained sections to collect imaging samples. A brief analysis of OCT technology and its current applications is also reported, as well as intra-cerebral OCT feasibility on brain mapping during neurosurgical procedures.

Resoluutio ennen, nyt ja tulevaisuudessa. Onko 8K tarpeeksi ja kuinka paljon 16K oikeastaan on?

Tämä työ on kirjallisuuskatsaus digitaalisen teräväpiirtoresoluution historiaan, nykyhetkeen ja tulevaisuuteen. Lisäksi käydään läpi eri medioista löytyviä termejä ja pyritään selvittämään näiden termien merkitys lukijalle. Työ on tehty Lappeenrannan teknillisen yliopiston Tietotekniikan osastolle. Teräväpiirtotelevision historia alkaa jo 1960-luvulta ja ensimmäiset teräväpiirtoresoluutiot kehitettiin 1970-luvulla. Kun resoluutiota kasvatetaan, myös kuvatiedoston ja vaadittavan tallennustilan koko kasvaa. Se aiheuttaa uusia haasteita muun muassa lähetys-, pakkaus- ja vastaanotintekniikoille. 4K-resoluutiot ovat jo täällä, mutta miten käy 16K-resoluution. Onko suuresta resoluutiosta hyötyä esimerkiksi Virtual Reality –sovelluksissa?

Using GPS, GIS & remote sensing to understand Niagara Terroir

The focus of this study was to detennine whether soil texture and composition variables were related to vine water status and both yield components and grape composition, and whether multispectral high definition airborne imagery could be used to segregate zones in vineyards to target fruit of highest quality for premium winemaking. The study took place on a 10-ha commercial Riesling vineyard at Thirty Bench Winemakers, in Beamsville (Ontario). Results showed that Soil moisture and leaf'l' were temporally stable and related to berry composition and remotely-sensed data. Remote-sensing, through the calculation of vegetation indices, was particularly useful to predict vine vigor, yield, fruit maturity as well as berry monoterpene concentration; it could also clearly assist in making wines that are more representative ofthe cultivar used, and also wines that are a reflection of a specific terroir, since calculated vegetation indices were highly correlated to typical Riesling.

Mise à jour de la Base de Données Topographiques du Québec à l'aide d'images à très haute résolution spatiale et du progiciel Sigma0 : le cas des voies de communication

Le Ministère des Ressources Naturelles et de la Faune (MRNF) a mandaté la compagnie de géomatique SYNETIX inc. de Montréal et le laboratoire de télédétection de l’Université de Montréal dans le but de développer une application dédiée à la détection automatique et la mise à jour du réseau routier des cartes topographiques à l’échelle 1 : 20 000 à partir de l’imagerie optique à haute résolution spatiale. À cette fin, les mandataires ont entrepris l’adaptation du progiciel SIGMA0 qu’ils avaient conjointement développé pour la mise à jour cartographique à partir d’images satellitales de résolution d’environ 5 mètres. Le produit dérivé de SIGMA0 fut un module nommé SIGMA-ROUTES dont le principe de détection des routes repose sur le balayage d’un filtre le long des vecteurs routiers de la cartographie existante. Les réponses du filtre sur des images couleurs à très haute résolution d’une grande complexité radiométrique (photographies aériennes) conduisent à l’assignation d’étiquettes selon l’état intact, suspect, disparu ou nouveau aux segments routiers repérés. L’objectif général de ce projet est d’évaluer la justesse de l’assignation des statuts ou états en quantifiant le rendement sur la base des distances totales détectées en conformité avec la référence ainsi qu’en procédant à une analyse spatiale des incohérences. La séquence des essais cible d’abord l’effet de la résolution sur le taux de conformité et dans un second temps, les gains escomptés par une succession de traitements de rehaussement destinée à rendre ces images plus propices à l’extraction du réseau routier. La démarche globale implique d’abord la caractérisation d’un site d’essai dans la région de Sherbrooke comportant 40 km de routes de diverses catégories allant du sentier boisé au large collecteur sur une superficie de 2,8 km2. Une carte de vérité terrain des voies de communication nous a permis d’établir des données de référence issues d’une détection visuelle à laquelle sont confrontés les résultats de détection de SIGMA-ROUTES. Nos résultats confirment que la complexité radiométrique des images à haute résolution en milieu urbain bénéficie des prétraitements telles que la segmentation et la compensation d’histogramme uniformisant les surfaces routières. On constate aussi que les performances présentent une hypersensibilité aux variations de résolution alors que le passage entre nos trois résolutions (84, 168 et 210 cm) altère le taux de détection de pratiquement 15% sur les distances totales en concordance avec la référence et segmente spatialement de longs vecteurs intacts en plusieurs portions alternant entre les statuts intact, suspect et disparu. La détection des routes existantes en conformité avec la référence a atteint 78% avec notre plus efficace combinaison de résolution et de prétraitements d’images. Des problèmes chroniques de détection ont été repérés dont la présence de plusieurs segments sans assignation et ignorés du processus. Il y a aussi une surestimation de fausses détections assignées suspectes alors qu’elles devraient être identifiées intactes. Nous estimons, sur la base des mesures linéaires et des analyses spatiales des détections que l’assignation du statut intact devrait atteindre 90% de conformité avec la référence après divers ajustements à l’algorithme. La détection des nouvelles routes fut un échec sans égard à la résolution ou au rehaussement d’image. La recherche des nouveaux segments qui s’appuie sur le repérage de points potentiels de début de nouvelles routes en connexion avec les routes existantes génère un emballement de fausses détections navigant entre les entités non-routières. En lien avec ces incohérences, nous avons isolé de nombreuses fausses détections de nouvelles routes générées parallèlement aux routes préalablement assignées intactes. Finalement, nous suggérons une procédure mettant à profit certaines images rehaussées tout en intégrant l’intervention humaine à quelques phases charnières du processus.