A tissue engineering solution for segmental defect regeneration in load-bearing long bones

The reconstruction of large defects (>10 mm) in humans usually relies on bone graft transplantation. Limiting factors include availability of graft material, comorbidity, and insufficient integration into the damaged bone. We compare the gold standard autograft with biodegradable composite scaffolds consisting of medical-grade polycaprolactone and tricalcium phosphate combined with autologous bone marrow-derived mesenchymal stem cells (MSCs) or recombinant human bone morphogenetic protein 7 (rhBMP-7). Critical-sized defects in sheep - a model closely resembling human bone formation and structure - were treated with autograft, rhBMP-7, or MSCs. Bridging was observed within 3 months for both the autograft and the rhBMP-7 treatment. After 12 months, biomechanical analysis and microcomputed tomography imaging showed significantly greater bone formation and superior strength for the biomaterial scaffolds loaded with rhBMP-7 compared to the autograft. Axial bone distribution was greater at the interfaces. With rhBMP-7, at 3 months, the radial bone distribution within the scaffolds was homogeneous. At 12 months, however, significantly more bone was found in the scaffold architecture, indicating bone remodeling. Scaffolds alone or with MSC inclusion did not induce levels of bone formation comparable to those of the autograft and rhBMP-7 groups. Applied clinically, this approach using rhBMP-7 could overcome autograft-associated limitations.

The hygienic efficacy of different hand-drying methods : a review of the evidence

The transmission of bacteria is more likely to occur from wet skin than from dry skin; therefore, the proper drying of hands after washing should be an integral part of the hand hygiene process in health care. This article systematically reviews the research on the hygienic efficacy of different hand-drying methods. A literature search was conducted in April 2011 using the electronic databases PubMed, Scopus, and Web of Science. Search terms used were hand dryer and hand drying. The search was limited to articles published in English from January 1970 through March 2011. Twelve studies were included in the review. Hand-drying effectiveness includes the speed of drying, degree of dryness, effective removal of bacteria, and prevention of cross-contamination. This review found little agreement regarding the relative effectiveness of electric air dryers. However, most studies suggest that paper towels can dry hands efficiently, remove bacteria effectively, and cause less contamination of the washroom environment. From a hygiene viewpoint, paper towels are superior to electric air dryers. Paper towels should be recommended in locations where hygiene is paramount, such as hospitals and clinics.

Hand-held monocular SLAM in thermal-infrared

Thermal-infrared imagery is relatively robust to many of the failure conditions of visual and laser-based SLAM systems, such as fog, dust and smoke. The ability to use thermal-infrared video for localization is therefore highly appealing for many applications. However, operating in thermal-infrared is beyond the capacity of existing SLAM implementations. This paper presents the first known monocular SLAM system designed and tested for hand-held use in the thermal-infrared modality. The implementation includes a flexible feature detection layer able to achieve robust feature tracking in high-noise, low-texture thermal images. A novel approach for structure initialization is also presented. The system is robust to irregular motion and capable of handling the unique mechanical shutter interruptions common to thermal-infrared cameras. The evaluation demonstrates promising performance of the algorithm in several environments.

Correction of step artefact associated with MRI scanning of long bones

3D models of long bones are being utilised for a number of fields including orthopaedic implant design. Accurate reconstruction of 3D models is of utmost importance to design accurate implants to allow achieving a good alignment between two bone fragments. Thus for this purpose, CT scanners are employed to acquire accurate bone data exposing an individual to a high amount of ionising radiation. Magnetic resonance imaging (MRI) has been shown to be a potential alternative to computed tomography (CT) for scanning of volunteers for 3D reconstruction of long bones, essentially avoiding the high radiation dose from CT. In MRI imaging of long bones, the artefacts due to random movements of the skeletal system create challenges for researchers as they generate inaccuracies in the 3D models generated by using data sets containing such artefacts. One of the defects that have been observed during an initial study is the lateral shift artefact occurring in the reconstructed 3D models. This artefact is believed to result from volunteers moving the leg during two successive scanning stages (the lower limb has to be scanned in at least five stages due to the limited scanning length of the scanner). As this artefact creates inaccuracies in the implants designed using these models, it needs to be corrected before the application of 3D models to implant design. Therefore, this study aimed to correct the lateral shift artefact using 3D modelling techniques. The femora of five ovine hind limbs were scanned with a 3T MRI scanner using a 3D vibe based protocol. The scanning was conducted in two halves, while maintaining a good overlap between them. A lateral shift was generated by moving the limb several millimetres between two scanning stages. The 3D models were reconstructed using a multi threshold segmentation method. The correction of the artefact was achieved by aligning the two halves using the robust iterative closest point (ICP) algorithm, with the help of the overlapping region between the two. The models with the corrected artefact were compared with the reference model generated by CT scanning of the same sample. The results indicate that the correction of the artefact was achieved with an average deviation of 0.32 ± 0.02 mm between the corrected model and the reference model. In comparison, the model obtained from a single MRI scan generated an average error of 0.25 ± 0.02 mm when compared with the reference model. An average deviation of 0.34 ± 0.04 mm was seen when the models generated after the table was moved were compared to the reference models; thus, the movement of the table is also a contributing factor to the motion artefacts.

Properties of hand-made clay balls used as a novel filter media

Filtration using granular media such as quarried sand, anthracite and granular activated carbon is a well-known technique used in both water and wastewater treatment. A relatively new prefiltration method called pebble matrix filtration (PMF) technology has been proved effective in treating high turbidity water during heavy rain periods that occur in many parts of the world. Sand and pebbles are the principal filter media used in PMF laboratory and pilot field trials conducted in the UK, Papua New Guinea and Serbia. However during first full-scale trials at a water treatment plant in Sri Lanka in 2008, problems were encountered in sourcing the required uniform size and shape of pebbles due to cost, scarcity and Government regulations on pebble dredging. As an alternative to pebbles, hand-made clay pebbles (balls) were fired in a kiln and their performance evaluated for the sustainability of the PMF system. These clay balls within a filter bed are subjected to stresses due to self-weight and overburden, therefore, it is important that clay balls should be able to withstand these stresses in water saturated conditions. In this paper, experimentally determined physical properties including compression failure load (Uniaxial Compressive Strength) and tensile strength at failure (theoretical) of hand-made clay balls are described. Hand-made clay balls fired between the kiln temperatures of 875oC to 960oC gave failure loads of between 3.0 kN and 7.1 kN. In another test when clay balls were fired to 1250oC the failure load was 35.0 kN compared to natural Scottish cobbles with an average failure load of 29.5 kN. The uniaxial compressive strength of clay balls obtained by experiment has been presented in terms of the tensile yield stress of clay balls. Based on the effective stress principle in soil mechanics, a method for the estimation of maximum theoretical load on clay balls used as filter media is proposed and compared with experimental failure loads.

ACE research vignette 022 : family business succession : when death takes a hand

This series of research vignettes is aimed at sharing current and interesting research findings from our team of international Entrepreneurship researchers. In this vignette, Dr. Mervyn Morris considers the impact on family business operations due to the sudden and unexpected death of a key family member.

Changing learning to improve practice : hand hygiene education in Queensland medical schools

The aim of Queensland Health’s ‘Clean hands are life savers’ program is to change the culture and behaviour of healthcare workers related to hand hygiene. Hand hygiene is considered to be the most effective means of preventing pathogen cross-transmission and healthcare-associated infections. Most hospitals throughout Queensland as well as Australia now manage a hand hygiene program to increase the hand hygiene compliance of all healthcare workers. Reports taken from routine hand hygiene observations reveal that doctors are usually less compliant in their hand-washing practices than other healthcare worker groups. The Centre for Healthcare Related Infection Surveillance and Prevention (CHRISP) has attempted to have an impact on this challenging group through their Medical Leadership Initiative. With education as a core component of the program, efforts were made to ensure our future doctors were receiving information that aligned with Queensland Health standards during their formative years at medical school. CHRISP met with university instructors to understand what infection prevention education was currently included in the curriculum and support the introduction of new learning activities that specifically focused on hand hygiene. This prompted change to the existing curriculum and a range of interventions were employed with mixed success. Although met with challenges, methods to integrate more infection prevention teaching were found.

Silver Gelatin Print: A group exhibition curated by Karen Milder that investigates and captures the traditional processes using photograms, liquid emulsion, toning, hand-colouring and film. Part of the Queensland Festival of Photography 4 (QFP4).

Pillar of salt: (3 hand-applied silver gelatin photographs) Statement: For women moving into new experiences and spaces, loss and hardship is often a price to be paid. These courageous women look back to things they have overcome in order to continue to grow.

Anatomical MR imaging of long bones : comparative performance of MRI at 1.5 T and 3 T

The current gold standard for the design of orthopaedic implants is 3D models of long bones obtained using computed tomography (CT). However, high-resolution CT imaging involves high radiation exposure, which limits its use in healthy human volunteers. Magnetic resonance imaging (MRI) is an attractive alternative for the scanning of healthy human volunteers for research purposes. Current limitations of MRI include difficulties of tissue segmentation within joints and long scanning times. In this work, we explore the possibility of overcoming these limitations through the use of MRI scanners operating at a higher field strength. We quantitatively compare the quality of anatomical MR images of long bones obtained at 1.5 T and 3 T and optimise the scanning protocol of 3 T MRI. FLASH images of the right leg of five human volunteers acquired at 1.5 T and 3 T were compared in terms of signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR). The comparison showed a relatively high CNR and SNR at 3 T for most regions of the femur and tibia, with the exception of the distal diaphyseal region of the femur and the mid diaphyseal region of the tibia. This was accompanied by an ~65% increase in the longitudinal spin relaxation time (T1) of the muscle at 3 T compared to 1.5 T. The results suggest that MRI at 3 T may be able to enhance the segmentability and potentially improve the accuracy of 3D anatomical models of long bones, compared to 1.5 T. We discuss how the total imaging times at 3 T can be kept short while maximising the CNR and SNR of the images obtained.

Linking scientific evidence and decision making : A case study of hand hygiene interventions

We consider how data from scientific research should be used for decision making in health services. Whether a hand hygiene intervention to reduce risk of nosocomial infection should be widely adopted is the case study. Improving hand hygiene has been described as the most important measure to prevent nosocomial infection. 1 Transmission of microorganisms is reduced, and fewer infections arise, which leads to a reduction in mortality2 and cost savings.3 Implementing a hand hygiene program is itself costly, so the extra investment should be tested for cost-effectiveness.4,5 The first part of our commentary is about cost-effectiveness models and how they inform decision making for health services. The second part is about how data on the effectiveness of hand hygiene programs arising from scientific studies are used, and 2 points are made: the threshold for statistical inference of .05 used to judge effectiveness studies is not important for decision making,6,7 and potentially valuable evidence about effectiveness might be excluded by decision makers because it is deemed low quality.8 The ideas put forward will help researchers and health services decision makers to appraise scientific evidence in a more powerful way.

Cryotherapy for docetaxel-induced hand and nail toxicity: Randomised control trial

Purpose This study investigated the efficacy and safety of cryotherapy, in the form of frozen gel gloves, in relation to docetaxel-induced hand and fingernail toxicities. Patients and methods After piloting with 21 patients, a consecutive series sample of patients (n=53) prescribed docetaxel every three weeks, for a minimum of three cycles, was enrolled in this randomised control trial. Participants acted as their own control, with the frozen gel glove worn on one randomised hand for 15 minutes prior to infusion, for the duration of the infusion, and for 15 minutes of after completion of treatment. Hand and nail toxicities were evaluated by two blinded assessors according to CTCAE.v4 criteria. To assess the potential for cross-infection of multi-use gloves, microbial culture and sensitivity swabs were taken of each glove at every tenth use. Results Of the 53 participants enrolled in the main study, 21 provided evaluable data. There was a 60% withdrawal rate due to patient discomfort with the intervention. The mean incidence and severity of toxicities in all evaluable cycles in control and intervention hands respectively were erythroderma Grade 1 (5%/5%); nail discolouration Grade 1 (81%/67%); nail loss Grade 1 (19%/19%) and nail ridging Grade 1 (57%/57%). No significant differences were determined between hand conditions in terms of time to event, nor in terms of toxicity in gloved and non-gloved hands. Conclusion While cryotherapy in the form of frozen gloves for the cutaneous toxicities associated with docetaxel is safe, its limited efficacy, patient discomfort and some logistical issues preclude its use in our clinical setting.

Gene silencing: Fleshing out the bones

Genetic studies are revealing the pathway for RNA-mediated gene silencing. Short RNA molecules are the key, giving sequence specificity for RNA degradation and mediating communication within and between cells; these short RNAs are common to transcriptional and post-transcriptional silencing pathways. The expression of transgenes in plants varies between independent transformants and there are many examples where the transgenic trait is not expressed, or disappears in subsequent generations, despite the presence of the transgene. This loss of a trait, but not of the transgene, has become known as gene silencing and can take two forms, transcriptional or post-transcriptional. As their names imply, transcriptional gene silencing occurs when a transgene is not transcribed, whereas in post-transcriptional gene silencing, the transgene mRNA is produced but degraded before it is translated (reviewed in [1]). Both forms of silencing seem to be the result of inherent mechanisms for protecting plants against mobile or invading DNA — for example, transposable elements or the T-DNA of Agrobacterium — or RNA viruses. Plants are not alone in their capacity for transgene silencing; both forms of silencing occur in flies and fungi, where it is known as RIP or quelling, while nematodes exhibit post-transcriptional silencing, generally referred to as RNA interference (RNAi). A clearer picture of the mechanisms and relationships of the different types of transgene silencing is beginning to emerge from a number of recent studies [2], [3], [4], [5], [6], [7] and [8]. Some of these studies [2], [3], [4] and [5] have enhanced our understanding of the steps within the post-transcriptional silencing pathway, and others [6], [7] and [8] have demonstrated that the two forms of silencing may be mechanistically linked.

Silk purse, sow’s ear : transforming second-Hand clothing into luxury fashion through craft practice

There is more apparel being created than ever before in history. The unsustainable production of materials and the clothing and textile waste that contributes annually to landfill, an estimated 500 000 tonnes of clothing per year in the UK (Gray, 2012) are significant issues inspiring the practice of Australian fashion designers, Carla van Lunn and Carla Binotto. While the contemporary fashion industry is built upon a production and consumption model that is younger than the industrial revolution, the traditions of costume, craft, and bodily adornment are ancient practices. Binotto and van Lunn believe that the potential for sustainable fashion practice lies outside the current industrial manufacturing model. This case study will discuss their fashion label, Maison Briz Vegas, and examine how recycling and traditional craft practices can be used to address the problem of clothing waste and offer an alternative idea of value in fashion and materials, addressing the indicative conference theme, Craft as Sustainability Activism in Practice. “Maison Briz Vegas”, a play on the notion of French luxury and the designers’ new world and sub-tropical home town, Brisbane, is an experimental and craft-based fashion label that uses second-hand cotton T-shirts and wool sweaters as primary materials to create designer fashion. The first collection, titled “The Wasteland”, was conceived and created in Paris in 2011, where designer Carla van Lunn had been living and working for several years. The collection was inspired by the precariousness of the global economy and concerns about climate change. The mountains of discarded clothing found at flea markets provided a textile resource from which van Lunn created a recycled hand-crafted fashion collection with an activist message and was shown to buyers and press during Paris Fashion Week. The label has since become a collaboration with fellow Australian designer Carla Binotto. The craft processes employed in Maison Briz Vegas’ up-cycled fashion collections include original hand block-printing, hand embroidery, quilting and patchwork. Taking an artisanal and slow approach, the designers work to create a hand touched imperfect style in a fashion market flooded with digital printing and fast mass-produced garments. The recycling extends to garment fastenings and embellishments, with discarded jar lids and bottle tops being used as buttons and within embroidery. This process transforms the material and aesthetic value of cheap and generic second-hand clothing and household waste. Maison Briz Vegas demonstrates the potential for craft and design to be an interface for environmental activism within the world of fashion. Presenting garments that are both high-design and thoughtfully recycled in a significant fashion context, such as Paris Fashion Week, Maison Briz Vegas has been able to engage a high-profile luxury fashion audience which has not traditionally considered sustainable or eco practices as relevant or desirable in themselves. The designers are studying how to apply their production model on a greater scale in order to fill commercial orders and reach a wider audience whilst maintaining the element of bespoke, limited edition, and slow hand-craft within their work.

Help at hand to navigate legal minefields

Review(s) of: The journalist's guide to media law, 4th edition, by Mark Pearson and Mark Polden, Sydney: Allen and Unwin, 2011, 480 pp. ISBN 9781742370385; Blogging and tweeting without getting sued: A global guide to the law for anyone writing online, by Mark Pearson, Sydney: Allen and Unwin, 2012, 222 pp. ISBN 9781742378770.

See to believe : the Center for Tactical Magic’s sleight of hand

The Bay Area’s Center for Tactical Magic has been performing ‘‘magical’’ art interventions since 2000. The Center’s work augments traditional activist techniques by offering new conceptions of what art and activism can entail in a contemporary urban context. This article explores how Jacques Rancie`re’s reconfigured relationship between art and politics can be applied to the Center’s work, providing new distributions of the sensible for participants.