Size and temperature dependent stability and phase transformation in single-crystal zirconium nanowire

A novel size dependent FCC (face-centered-cubic) -> HCP (hexagonally-closed-pack) phase transformation and stability of an initial FCC zirconium nanowire are studied. FCC zirconium nanowires with cross-sectional dimensions < 20 are found unstable in nature, and they undergo a FCC -> HCP phase transformation, which is driven by tensile surface stress induced high internal compressive stresses. FCC nanowire with cross-sectional dimensions > 20 , in which surface stresses are not enough to drive the phase transformation, show meta-stability. In such a case, an external kinetic energy in the form of thermal heating is required to overcome the energy barrier and achieve FCC -> HCP phase transformation. The FCC-HCP transition pathway is also studied using Nudged Elastic Band (NEB) method, to further confirm the size dependent stability/metastability of Zr nanowires. We also show size dependent critical temperature, which is required for complete phase transformation of a metastable-FCC nanowire.

Structure and mechanical properties of Ti-C films deposited using combination of pulsed DC and normal DC magnetron co-sputtering

Titanium-carbon (Ti-C) thin films of different compositions were prepared by a combination of pulsed DC (for Ti target) and normal DC (for graphite target) magnetron co-sputtering on oxidized silicon and fused quartz substrates. At 33.7 at.% of C content, pure hcp Ti transforms into fcc-TiC with a preferential orientation of (2 2 0) along with (1 1 1) and (2 0 0). A clear transformation in the preferential orientation from (2 2 0) to (1 1 1) has been observed when the C content was increased to 56 at.%. At 62.5 at.% of C, TiC precipitates in an amorphous carbon matrix whereas further increase in C leads to X-ray amorphous films. The cross-sectional scanning electron microscope images reveal that the films with low carbon content consists of columnar grains, whereas, randomly oriented grains are in an amorphous carbon matrix at higher carbon content. A dramatic variation was observed in the mechanical properties such as hardness, H, from 30 to 1 GPa and in modulus, E, from 255 to 25 GPa with varying carbon content in the films. Resistance to plastic deformation parameter was observed as 0.417 for films containing 62.5 at.% of C. Nanoscratch test reveals that the films are highly scratch resistant with a coefficient of friction ranging from 0.15 to 0.04. (C) 2012 Elsevier B.V. All rights reserved.

Carbonization of solvent and capping agent based enhancement in the stabilization of cobalt nanoparticles and their magnetic study

We describe a hybrid synthetic protocol, the solvated metal atom dispersion (SMAD) method, for the synthesis and stabilization of monodisperse amorphous cobalt nanoparticles. By employing an optimized ratio of a weakly coordinating solvent and a capping agent monodisperse colloidal cobalt nanoparticles (2 +/- 0.5 nm) have been prepared by the SMAD method. However, the as-prepared samples were found to be oxidatively unstable which was elucidated by their magnetic studies. Oxidative stability in our case was achieved via a pyrolysis process that led to the decomposition of the organic solvent and the capping agent resulting in the formation of carbon encapsulated cobalt nanoparticles which was confirmed by Raman spectroscopy. Controlled annealing at different temperatures led to the phase transformation of metallic cobalt from the hcp to fcc phase. The magnetic behaviour varies with the phase and the particle size; especially, the coercivity of nanoparticles exhibited strong dependence on the phase transformation of cobalt. The high saturation magnetization close to that of the bulk value was achieved in the case of the annealed samples. In addition to detailed structural and morphological characterization, the results of thermal and magnetic studies are also presented.

Effect of Mg addition on microstructural, mechanical and environmental properties of Nb-Si eutectic composite

The paper reports the effect of addition of small amount of Mg on the mechanical and oxidation properties of Nb-Nb3Si eutectic composites in Nb-Si system under the condition of suction casting. Mg addition increases the volume fraction of primary dendrites of Nb solid solution. This phase contains significant amount of strengthening precipitates. Two different precipitates are identified. The large plate shaped precipitates are that of hcp phase, while fine coherent precipitates have the structure similar to recently identified delta-Nb11Si2 phase. The Mg addition improves both the strength and ductility of the composite at room temperature (similar to 1.4 GPa and similar to 5% engineering strain) as well as at 700 degrees C(similar to 1.2 GPa and similar to 7% engineering strain). The presence of Mg results in a complex barrier layer which significantly increases the oxidation resistance up to a temperature of at least 1000 degrees C. (C) 2012 Elsevier B.V. All rights reserved.

Factors influencing stick-slip motion: effect of hardness, crystal structure and surface texture

In the present investigation, efforts were made to study the different frictional responses of materials with varying crystal structure and hardness during sliding against a relatively harder material of different surface textures and roughness. In the experiments, pins were made of pure metals and alloys with significantly different hardness values. Pure metals were selected based on different class of crystal structures, such as face centered cubic (FCC), body centered cubic (BCC), body centered tetragonal (BCT) and hexagonal close packed (HCP) structures. The surface textures with varying roughness were generated on the counterpart plate which was made of H-11 die steel. The experiments were conducted under dry and lubricated conditions using an inclined pin-on-plate sliding tester for various normal loads at ambient environment. In the experiments, it was found that the coefficient of friction is controlled by the surface texture of the harder mating surfaces. Further, two kinds of frictional response, namely steady-state and stick-slip, were observed during sliding. More specifically, stead-state frictional response was observed for the FCC metals, alloys and materials with higher hardness. Stick-slip frictional response was observed for the metals which have limited number of slip systems such as BCT and HCP. In addition, the stick-slip frictional response was dependent on the normal load, lubrication, hardness and surface texture of the counterpart material. However, for a given kind of surface texture, the roughness of the surface affects neither the average coefficient of friction nor the amplitude of stick-slip oscillation significantly.

Exchange-spring mechanism of soft and hard ferrite nanocomposites

The paper reports exchange-spring soft and hard ferrite nanocomposites synthesized by chemical co-precipitation with or without the application of ultrasonic vibration. The composites contained BaFe12O19 as the hard phase and CoFe2O4/MgFe2O4 as the soft phase. X-ray diffraction patterns of the samples in the optimum calcined condition indicated the presence of soft ferrites as face-centred cubic (fcc) and hard ferrites as hexagonal close packed (hcp) structure respectively. Temperature dependence of magnetization in the range of 20-700 degrees C demonstrated distinct presence of soft and hard ferrites as magnetic phases which are characterized by wide difference in magnetic anisotropy and coercivity. Exchange-spring mechanism led these nanocomposite systems to exchange-coupled, which ultimately produced convex hysteresis loops characteristic of a single-phase permanent magnet. Fairly high value of coercivity and maximum energy product were observed for the samples in the optimum calcined conditions with a maximum applied field of 1600 kA/m (2 T).

Kinetically stabilized C-60-toluene solvate nanostructures with a discrete absorption edge enabling supramolecular topotactic molecular exchange

Nanosized fullerene solvates have attracted widespread research attention due to recent interesting discoveries. A particular type of solvate is limited to a fixed number of solvents and designing new solvates within the same family is a fundamental challenge. Here we demonstrate that the hexagonal closed packed (HCP) phase of C-60 solvates, formed with m-xylene, can also be stabilized using toluene. Contrary to the notion on their instability, these can be stabilized from minutes up to months by tuning the occupancy of solvent molecules. Due to high stability, we could record their absorption edge, and measure excitonic life-time, which has not been reported for any C-60 solvate. Despite being solid, absorbance spectrum of the solvates is similar in appearance to that of C-60 in solution. A new absorption band appears at 673 nm. The fluorescence lifetime at 760 nm is similar to 1.2 ns, suggesting an excited state unaffected by solvent-C-60 interaction. Finally, we utilized the unstable set of HCP solvates to exchange with a second solvent by a topotactic exchange mechanism, which rendered near permanent stability to the otherwise few minutes stable solvates. This is also the first example of topotactic exchange in supramolecular crystal, which is widely known in ionic solids. (C) 2014 Elsevier Ltd. All rights reserved.

Ni Nano-particle Encapsulated in Hollow Carbon Sphere Electrocatalyst in Polymer Electrolyte Membrane Water Electrolyzer

The present study evaluates the synthesis by solvo-thermal method and electrocatalytic activity of nickel nano-particles encapsulated in hollow carbon sphere, in hydrogen and oxygen evolution reaction in PEM water electrolyzer. The XRD patterns have ascertained the formation of nickel metal with different planes in face centered cubic (fcc) and hexagonal closed pack (hcp) form. SEM and TEM images have confirmed the nickel nano-particles with diameter of 10-50 nm inside the 0.2 mu m sized hollow carbon spheres. The BET surface area values gradually decreased with greater encapsulation of nickel; although the electrochemical active surface area (ECSA) values have been calculated as quite higher. It confirms the well dispersion of nickel in the materials and induces their electrocatalytic performance through the active surface sites. The cyclic voltammetric studies have evaluated hydrogen desorption peaks as five times more intense in nickel encapsulated materials, in comparison to the pure hollow carbon spheres. The anodic peak current density value has reached the highest level of 1.9 A cm(-2) for HCSNi10, which gradually decreases with lesser amount of nickel in the electrocatalysts. These electrocatalysts have been proved electrochemically stable during their usage for 48 h long duration under potentiostatic condition. (C) 2015 Elsevier Ltd. All rights reserved.

On variant distribution and coarsening behavior of the a phase in a metastable beta titanium alloy

The stereology, variant distribution and coarsening behavior of semicoherent alpha(hcp) precipitates in a beta(bcc) matrix of a Ti5553 alloy has been analyzed, and a dominant 3-variant cluster has been observed in which the variants are related to each other by an axis-angle pair <<11(2)over bar> 0 >/60 degrees. Shape and spatial distribution independent elastic self and interaction energies for all pairwise and triplet combinations of a have been calculated and it is found that the 3-cluster combination that is experimentally observed most frequently has the lowest energy for the semicoherent state. The coarsening behavior of the delta distribution follows LSW kinetics after an initial transient, and has been modeled by phase field methods. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Strain-Induced Grain Refinement of Cobalt During Surface Mechanical Attrition Treatment

The microstructural evolution during surface mechanical attrition treatment of cobalt (a mixture of hexagonal close packed (hep) and face-centered cubic (fcc) phases) was investigated. In order to reveal the mechanism of grain refinement and strain accommodation. The microstructure was systematically characterized by both cross-sectional and planar-view transmission electron microscopy. In the hcp phase, the process of grain refinement. Accompanied by an increase in strain imposed in the surface layer. Involved: (1) the onset of 110 111 deformation twinning, (2) the operation of (1 120) 110 1 0} prismatic and (1 120) (000 1) basal slip, leading to the formation of low-angle dislocation boundaries, and (3) the successive subdivision of grains to a finer and finer scale. Ressulting in the formation of highly misoriented nanocrystalline grains. Moreover. The formation of nanocrystalliies at the grain boundary and triple junction was also observed to occur concurrently with straining. By contrast. The fec phase accommodated strain in a sequence as follows: (1) slip of dislocations by forming intersecting planar arrays of dislocations, (2) {1 1 1} deformation twinning, and (3) the gamma(fcc) --> epsilon(hcp) martensitic phase transformation. The mechanism of grain refinement was interpreted in terms of the structural subdivision of grains together with dynamic recrystallization occurring in the hep phase and the gamma --> E: martensitic transformation in the fcc phase as well.

Effects of magnetostriction and superlattice formation in ferromagnetic thin films

The contribution to the magnetic uniaxial perpendicular anisotropy which arises from substrate constraint through magnetostrictive effects has been measured in Ni-Fe and Ni-Co thin films evaporated on substrates at room temperature. This was accomplished by measuring the perpendicular anisotropy before and after removal of the film from the substrate. Data are given for the fcc crystal structure regions of both alloy systems, but data for Ni-Co include compositions with less than 60% Ni which have a small percentage of the hcp phase mixed with the fcc phase. The constraint contribution to the perpendicular anisotropy correlates well with the value of the bulk magnetostriction constant using the equation ∆K_˔=3/2λ_sσ. Measured values of isotropic stress for films thicker than 600 Å were 1.6 x 10¹⁰ dyn/cm². In films less than 600 Å thick the isotropic stress decreased with decreasing thickness. After removal of the films from the substrates, the measured perpendicular anisotropy deviated from the expected geometrical shape anisotropy near pure Ni in both alloys. This indicates that additional significant sources of anisotropy exist at these compositions.

The effect of substrate constraint on the crystalline anisotropy K₁ of Ni-Fe epitaxial films has been studied by use of a film removal technique, which involves the evaporation of an epitaxial layer of LiF on MgO, the epitaxial growth of the metallic film on the LiF, and the stripping of the film with water soluble tape. Films ranging in composition from 50% to 100% Ni have been studied. For compositions below 90% Ni the experimental values agree reasonably well with the first order theoretical prediction, ∆K₁=[-9/4(C₁₁-C₁₂)λ² 100+9/2C₄₄λ²111].

In order to compare the magnetic properties of epitaxial thin films more completely with the properties of bulk single crystals, Ni-Fe films ranging in composition from 60% to 90% Ni, which were evaporated epitaxially on (100) MgO substrates, have been subsequently annealed at 400°C in a vacuum of less than 10^-7 Torr to form the ordered Ni₃Fe structure near the 75% composition. This ordered structure has been confirmed by electron diffraction.

The saturation magnetization at Ni₃Fe increased about 6% with ordering which is in good agreement with previous bulk data. Measurements of the magnetocrystalline anisotropy energy K₁ for the epitaxial films show the same large changes with ordering as observed in bulk single crystal samples. In the (001) plane the magnetostriction constants ^λ100, ^λ111 are directly related to the induced anisotropy due to a uniform uniaxial strain in the [100] and [110] directions respectively. Assuming that the elastic constants of a film are the same as in bulk material and are unchanged by ordering, the changes in strain sensitivity with ordering for the epitaxial films are found to be in good agreement with values predicted from bulk data. The exchange constant A as measured by ferromagnetic resonance has been measured at the Ni₃Fe composition and found to increase 25% with ordering. This seems to indicate a significant increase in the Curie temperature which has only been inferred indirectly for bulk material.

非洲爪蛙分泌型叶酸结合蛋白及NKX6.3在早期胚胎神经发育中的功能研究

叶酸是B族维生素的一员，参与体内一系列重要的生命过程包括DNA，氨基酸的合成，调控细胞周期，参与一碳单位供体循环，调节DNA,蛋白质甲基化等。叶酸的许多功能都和叶酸结合蛋白有关，体内有多种跨膜形式的叶酸结合蛋白，比如Folbp1，RFC，HCP等。以前的研究表明这些不同的叶酸结合蛋白具有不同的功能。分泌型叶酸结合蛋白是另外一类叶酸结合蛋白，在人类，小鼠，猪中都有序列报道，但是其功能却知之甚少。 我们在非洲爪蛙中鉴定出一个全新的分泌型叶酸结合蛋白并命名为Secreted Folate Binding Protein(sFBP)。在胚胎和转染细胞系中我们都证明该蛋白是分泌性的，表面等离子共振实验发现sFBP能够结合叶酸。在胚胎早期这个基因表达于粘液腺和神经板区域，神经管闭合后在神经管、粘液腺、眼睛，头部以及鳃弓都有表达。特异morpholino 阻断sFBP翻译后发现粘液腺发育异常，神经管闭合缺陷，前后体轴聚集延伸运动受到抑制，尾芽期胚胎表现出体轴缩短，无眼，小头或无头的表型。进一步研究发现显微注射sFBP morpholino 的胚胎神经板区域细胞发生凋亡，中胚层和神经外胚层的一系列粘附分子表达异常，神经细胞的正常分化也受到抑制。通过显微移植实验我们还发现抑制sFBP的翻译后，神经嵴细胞的正常分化和迁移都受到抑制。但是，显微注射叶酸及其类似物或者显微注射甲基供体S-腺苷甲硫氨酸或者亮氨酸甲基转移酶都不能挽救阻断sFBP造成的表形，由此提示sFBP可能不是通过叶酸传统的参与营养合成或者甲基化的途径发挥作用。我们发现注射sFBP morpholino可以抑制Islet-1mRNA和蛋白质的表达，Islet-1的表达区域与sFBP类似。共同注射Islet-1 mRNA和sFBP morpholino可以极大的挽救sFBP morpholino的表型。最后通过morpholino特异阻断Islet-1的表达后，我们发现其表现出与sFBP morpholino类似的粘液腺发育缺陷，神经板细胞凋亡，小头无眼的表形。由此叶酸是B族维生素的一员，参与体内一系列重要的生命过程包括DNA，氨基酸的合成，调控细胞周期，参与一碳单位供体循环，调节DNA,蛋白质甲基化等。叶酸的许多功能都和叶酸结合蛋白有关，体内有多种跨膜形式的叶酸结合蛋白，比如Folbp1，RFC，HCP等。以前的研究表明这些不同的叶酸结合蛋白具有不同的功能。分泌型叶酸结合蛋白是另外一类叶酸结合蛋白，在人类，小鼠，猪中都有序列报道，但是其功能却知之甚少。 我们在非洲爪蛙中鉴定出一个全新的分泌型叶酸结合蛋白并命名为Secreted Folate Binding Protein(sFBP)。在胚胎和转染细胞系中我们都证明该蛋白是分泌性的，表面等离子共振实验发现sFBP能够结合叶酸。在胚胎早期这个基因表达于粘液腺和神经板区域，神经管闭合后在神经管、粘液腺、眼睛，头部以及鳃弓都有表达。特异morpholino 阻断sFBP翻译后发现粘液腺发育异常，神经管闭合缺陷，前后体轴聚集延伸运动受到抑制，尾芽期胚胎表现出体轴缩短，无眼，小头或无头的表型。进一步研究发现显微注射sFBP morpholino 的胚胎神经板区域细胞发生凋亡，中胚层和神经外胚层的一系列粘附分子表达异常，神经细胞的正常分化也受到抑制。通过显微移植实验我们还发现抑制sFBP的翻译后，神经嵴细胞的正常分化和迁移都受到抑制。但是，显微注射叶酸及其类似物或者显微注射甲基供体S-腺苷甲硫氨酸或者亮氨酸甲基转移酶都不能挽救阻断sFBP造成的表形，由此提示sFBP可能不是通过叶酸传统的参与营养合成或者甲基化的途径发挥作用。我们发现注射sFBP morpholino可以抑制Islet-1mRNA和蛋白质的表达，Islet-1的表达区域与sFBP类似。共同注射Islet-1 mRNA和sFBP morpholino可以极大的挽救sFBP morpholino的表型。最后通过morpholino特异阻断Islet-1的表达后，我们发现其表现出与sFBP morpholino类似的粘液腺发育缺陷，神经板细胞凋亡，小头无眼的表形。由此我们认为sFBP结合叶酸后可能通过细胞膜上的受体传递信号，并且Islet-1可能在sFBP的下游发挥作用。 神经嵴是脊椎动物特有的一群多潜能干细胞，产生于表皮和神经板的边界，在原肠运动之后这群细胞通过表皮间充值转换从神经管背侧迁移到不同的区域，分化成不同的细胞类型，包括外周神经系统，色素细胞，软骨等。神经嵴的发生是一个多步骤多基因参与的精细调控过程。目前理论认为最初由一些分泌性信号分子又叫形态生成素比如BMP,Wnt，FGF，Notch等通过不同浓度梯度的相互作用调节一组在表皮和神经板边界的转录因子（Msx、Pax3/7、Zic1、Dlx3/5等）的表达，即边界决定。这些边界决定因子进一步在预定形成神经嵴的区域激活神经嵴特化基因比如Slug/Snail、FoxD3、Twist、Sox9/10的表达完成神经嵴的特化（Specification）。 Nkx6.3是Nkx6家族的一个转录因子，RT-PCR显示其呈现母源性表达。特异抗体显示Nkx6.3蛋白第9期在整个胚胎都表达，大部分蛋白集中在细胞核，有少部分蛋白定位于细胞膜上；神经板时期主要定位于神经嵴区域的细胞膜上。过表达Nkx6.3会影响细胞粘连分子的表达，由此干扰正常的胚胎原肠运动和Activin诱导的动物帽聚集延伸运动。显微注射Nkx6.3特异morpholino阻断其蛋白表达会抑制神经嵴的marker基因Wnt8，Fgf8，Pax3，Msx1，Zic1，FoxD3，Slug的转录，阻碍神经嵴的发育。在动物帽中单独注射Nkx6.3可以在mRNA水平上诱导Wnt8、Fgf8另一方面抑制BMP4的表达进而诱导神经嵴基因Pax3，Zic1，Slug的表达。报告基因实验也显示Nkx6.3能够激活Wnt信号而在动物帽中抑制BMP信号。Nkx6.3蛋白功能域分析发现其EH1结构域（domain）参与对Wnt8信号的激活，而EH1结构域和HD结构域之间的连接区域（linker domain）参与对FGF的激活和对BMP的抑制。进一步在动物帽和胚胎中分析发现Nkx6.3对Wnt8的激活依赖于FGF家族受体信号但是不依赖于Fgf8。有趣的是4细胞时期过表达Nkx6.3促进Fgf8和Wnt8 mRNA表达，但是抑制边界决定基因Msx1、Pax3和神经嵴特化基因Slug的转录。在32细胞时期显微注射Nkx6.3可以在内源神经嵴发生区域抑制Slug的表达，而异位却诱导Slug的mRNA。我们发现与动物帽中对BMP的调节不同，在胚胎中，过表达Nkx6.3会强烈的激活Smad1蛋白在细胞核中的表达即BMP信号被激活，高的BMP信号会抑制神经嵴的发生。另外我们发现过表达Nkx6.3在胚胎中抑制Dlx5而在动物帽中却不影响Dlx5的表达水平，Morpholino阻断Dlx5会抑制Msx1、Pax3和Slug的表达。BMP信号和Dlx5在动物帽和在整体胚胎中对Nkx6.3的不同响应可以一定程度上解释过表达Nkx6.3在2个系统中对神经嵴基因Slug相反的影响结果。

重离子蚀刻径迹中金属纳米线阵列的研制

本论文主要进行了核孔膜的蚀刻和紫外光辐照效应研究，以及在核孔膜模板内进行Cu、CO金属纳米线阵列的制备研究。在UNILAC（GSI，Darmstadt）加速器上真空和室温条件下对30μm厚的聚碳酸酯（PC）薄膜进行快重离子辐照，照射离子为11． 4 MeV／u的Au离子，辐照剂量在lion／cm，-3X109i0ns／cm，之间。重离子辐照导致在PC中产生潜径迹，通过化学蚀刻的方法将潜径迹放大而形成孔道。蚀刻速率与蚀刻温度、蚀刻液浓度、紫外光辐照敏化等参数密切相关。结果表明随着温度的升高蚀刻液浓度的增加、紫外光辐照时间的增长径迹蚀刻速率剧烈增加。此外，通过紫外可见光谱和力学性能测试发现，紫外光辐照会使Pc膜的光学性能和力学性能发生显著的变化。在能量密度为16mw／cm2的紫外光下，当膜两侧分别经过17．5小时的光照以后，392 nm处的吸收峰消失，而且其断裂伸长率大大减小。作为紫外光辐照效应的一个应用，我们利用“紫外光辐照＋液氮冷冻”的方法成功制备出了核孔膜断面的扫描电子显微镜样品，此方法能使样品的断面含有较少的残余应力从而使膜在断裂过程中没有发生明显的变形，使断面很好显现了膜和孔道的原始信息，如孔密度、形状、尺寸等。利用PC核孔膜作为模板用电化学沉积方法制备出了金属纳米线阵列。用磁控溅射的方法在PC膜模板的一面沉积一层Pt金属薄膜在电沉积过程中用作阴极。在自制的电沉积系统中用直流沉积的方法在PC核孔膜模板中成功制备出了Cu和Co金属纳米线，并运用SEM、xRD、VSM等手段对纳米线进行分析。结果表明，制备出的Cu纳米线长度约为30μm，直径从nm到协m量级，具有面心立方（fcc）结构，且纯度很高没有发现杂质。对Co纳米线阵列的xRD结果进行分析可以看出，制备出的c。纳米线阵列具有两种晶体结构：单相hcp结构和hcp、fcc共存结构。从vsM测量结果可以看出，Co纳米线阵列存在磁各向异性，即平行于纳米线轴向和垂直于纳米线轴向的剩余磁化强度和矫顽力存在明显差异，这主要是由于纳米线的形状各向异性和纳米线之间的磁相互作用引起的。

Mixed ligands supported yttrium alkyl complexes: Synthesis, characterization and catalysis toward lactide polymerization

Treatment of yttrium tris(alkyl)s, Y(CH2SiMe3)(3)(THF)(2), by equimolar H(C5Me4)SiMe3(HCp') and indene (Ind-H) afforded (eta(5)-Cp')Y(CH2SiMe3)(2)(THF) (1) and (eta(5)-Ind)Y(CH2SiMe3)(2)(THF) (2) via alkane elimination, respectively. Complex 1 reacted with methoxyamino phenols, 4,6-(CH3)(2)-2-[(MeOCH2CH2)(2)-NCH2]-C6H2-OH (HL1) and 4,6-(CMe3)(2)-2-[(MeOCH2CH2)(2)-NCH2]-C6H2OH (HL2) gave mixed ligands supported alkyl complexes [(eta(5)-Cp')(L)]Y(CH2SiMe3) (3: L = L-1; 4: L = L-2). Whilst, complex 2 was treated with HL2 to yield [(eta(5)-Ind)(L-2)]Y(CH2SiMe3) (5). The molecular structures of 3 and 5 were confirmed by X-ray diffraction to be mono(alkyl)s of THF-free, adopting pyramidal and tetragonal-bipyramidal geometry, respectively. Complexes 3 and 5 were high active initiators for the ring-opening polymerization Of L-lactide to give isotactic polylactide with high molecular weight and narrow to moderate polydispersity.

Nitrous oxide emissions from two alpine meadows in the Qinghai-Tibetan Plateau

Nitrous oxide (N2O) emission was measured in a Kobresia humilis meadow and a Potentilla fruticosa meadow in the Qinghai-Tibet Plateau from June 2003 to July 2006. Five treatments were setup in the two alpine meadows. Two bare soil treatments were setup in the K. humilis meadow (BSK) and in the P. fruticosa meadow (BSP) by removing the above- and belowground plant biomass. Three plant community treatments were setup with one in the K. humilis meadow (herbaceous community in the K. humilis meadow-HCK) and two in the P. fruticosa meadow (herbaceous community in the P. fruticosa meadow-HCP, and shrub community in the P. fruticosa meadow-SCP). Nitrous oxide emission from BSP was estimated to be 38.1 +/- 3.6 mu g m(-2) h(-1), significantly higher than from BSK (30.2 +/- 2.8 mu g m(-2) h(-1)) during the whole experiment period. Rates from the two herbaceous blocks (HCK and HCP) were close to 39.5 mu g m(-2) stop h(-1) during the whole experimental period whereas shrub community (SCP) showed significant high emission rates of N2O. Annual rate of N2O emission was estimated to be 356.7 +/- 8.3 and 295.0 +/- 11.6 mg m(-2) year(-1) from the alpine P. fruticosa meadow and from the alpine K. humilis meadow, respectively. These results suggest that alpine meadows in the Qinghai-Tibetan Plateau are an important source of N2O, contributing an average of 0.3 Tg N2O year(-1). We concluded that N2O emission will decrease, due to a predicted vegetation shift from shrubs to grasses imposed by overgrazing.