1000 resultados para Growth plates
Resumo:
Leishmanias can be produced by inoculation in conditioned McCoy cell culture growth medium (CGM). Leishmania (Leishmania) infantum chagasi (100 parasites) grown in NNN medium was inoculated in 2.5 mL CGM, kept in plates (24 wells) and its multiplication was observed for five days (120 hours). After day 5, the medium was saturated with the flagellate forms of the parasite (promastigotes). The reproduction of the leishmanias was observed every 24 hours and the number of parasites was calculated by counting the parasites in a drop of 10 µ L and photomicrographied. So the number of Leishmanias was adjusted to 1 mL volume. The advantage of the technique by isolation of Leishmania in CGM demonstrated in this study is its low cost and high efficacy even with a small quantity of parasites (10² promastigotes) used as inoculum. Additionally, isolation of the leishmania can be obtained together with an increase in their density (180 times) as observed by growth kinetics, within a shorter time. These results justify the use of this low-cost technique for the isolation and investigation of the behavior and multiplication of Leishmania both in vertebrates and invertebrates, besides offering means of obtaining antigens, whether whole antigens (leishmanias) or the soluble antigens produced by the parasites which may be useful for the production of new diagnostic kits.
Resumo:
We present herein an improved assay for detecting the presence of extracellular proteases from microorganisms on agar plates. Using different substrates (gelatin, BSA, hemoglobin) incorporated into the agar and varying the culture medium composition, we were able to detect proteolytic activities from Pseudomonas aeruginosa, Micrococcus luteus and Serratia marcescens as well as the influence that these components displayed in the expression of these enzymes. For all microorganisms tested we found that in agar-BHI or yeast extract medium containing gelatin the sensitivity of proteinase detection was considerably greater than in BSA-agar or hemoglobin-agar. However, when BSA or hemoglobin were added to the culture medium, there was an increase in growth along with a marked reduction in the amount of proteinase production. In the case of M. luteus the incorporation of glycerol in BHI or yeast extract gelatin-agar induced protease liberation. Our results indicate that the technique described here is of value for detecting extracellular proteases directly in the culture medium, by means of a qualitative assay, simple, inexpensive, straight forward method to assess the presence of the proteolytic activity of a given microorganism colony with great freedom in substrate selection.
Resumo:
In the largely organic soils in which ectomycorrhizas are commonly found, a preference for absorbing organic nitrogen over mineral forms is likely to be an advantage, especially where mineralisation rates are low. To determine rates of both independent and preferential growth of ectomycorrhizal basidiomycetes on organic and inorganic nitrogen, strains of Hebeloma were grown on nutrient agar media containing either NH4+ or glutamic acid as the sole source of nitrogen, on both single medium and split plate Petri dishes. Growth rates on the split plate Petri dishes, where the fungi had access to both nitrogen sources, were generally greater than on the single medium dishes. Growth on glutamic acid was at least equal to, and usually greater than, that on NH4+. In some cases growth on NH4+ alone appeared severely inhibited, a condition that was partially alleviated by access to glutamic acid on the split plates Petri dishes. This highlights a potential pitfall of single nitrogen source growth studies. The greater growth of most strains on glutamic acid suggests an adaptation to organic nitrogen utilisation in these strains. If this is so in soils with low mineralisation rates, direct uptake of amino acids by ectomycorrhizal plants could by-pass the bottle neck that requires mineral nitrogen to be made available for plant uptake.
Resumo:
Based on the genetic analysis of the phytopathogen Xylella fastidiosa genome, five media with defined composition were developed and the growth abilities of this fastidious prokaryote were evaluated in liquid media and on solid plates. All media had a common salt composition and included the same amounts of glucose and vitamins but differed in their amino acid content. XDM1 medium contained amino acids threonine, serine, glycine, alanine, aspartic acid and glutamic acid, for which complete degradation pathways occur in X fastidiosa; XDM2 included serine and methionine, amino acids for which biosynthetic enzymes are absent, plus asparagine and glutamine, which are abundant in the xylem sap; XDM3 had the same composition as XDM2 but with asparagine replaced by aspartic acid due to the presence of complete degradation pathway for aspartic acid; XDM4 was a minimal medium with glutamine as a sole nitrogen source; XDM5 had the same composition as XDM4, plus methionine. The liquid and solidified XDM2 and XDM3 media were the most effective for the growth of X. fastidiosa. This work opens the opportunity for the in silico design of bacterial defined media once their genome is sequenced. (C) 2002 Federation of European Microbiological Societies. Published by Elsevier B.V. B.V. All rights reserved.
Resumo:
Microwave disinfection of complete dentures has been recommended to treat denture stomatitis in non-immune compromised patients. Oral candidiasis is a frequent manifestation of HIV infection. The objective of this study is to evaluate the effectiveness of microwave irradiation on the disinfection of complete dentures inoculated with American Type Culture Collection (ATCC) and HIV isolates of five species of Candida. Fifty dentures were made, sterilised and inoculated with the tested microorganisms (C. albicans, C. dubliniensis, C. krusei, C. glabrata and C. tropicalis). After incubation (37 degrees C/48 h), dentures were microwaved (650 W/3 min). Non-irradiated dentures were used as positive controls. Replicate aliquots of suspensions were plated at dilutions 10(-1) to 10(-4) and incubated (37 degrees C/48 h). Colony counts (cfu ml(-1)) were quantified. Dentures were also incubated at 37 degrees C for 7 days. Data were analysed with 2-way anova and Tukey HSD tests (alpha = 0.05). Dentures contaminated with all Candida species showed sterilisation after microwave irradiation. All control dentures showed microbial growth on the plates. The cfu ml(-1) for C. glabrata was higher than those of C. albicans, C. dubliniensis and C. tropicalis whereas the cfu ml(-1) for C. krusei was lower. The cfu ml(-1) for clinical isolates was higher than those of ATCC yeast. Microwave irradiation for 3 min at 650 W resulted in sterilisation of all complete dentures.
Resumo:
This work's objectives were to isolate and evaluate the growth of the symbiotic fungus of Atta capiguara Gonçalves on artificial medium, under different pH and temperature conditions. Isolation was accomplished using the following media: Sabouraud, oat-agar, PDA, and PDA with the addition of extracts from the grasses Paspalum sp. Flügge and Hyparrhenia rufa (Nees) Stapf.. The medium used in the growth study was PDA with the addition of a Paspalum sp. (0.22%, w/v) extract at initial pH values of 4.5, 6.0, and 7.5. Mycelium disks were transferred to plates containing the culture medium. The plates were maintained at temperatures of 20, 23, and 26 ± 1°C. Mycelial radial growth evaluations were performed at 7, 14, 21, 28, and 35 days of incubation. Fungus isolation was obtained in all media studied. The highest radial means were obtained at initial pH values of 6.0 and 7.5 and temperatures of 23 and 26± 1°C. Greater plot losses occurred at the initial pH condition of 7.5. In general, A. capiguara fungi can be grown in the medium studied, at an initial pH of 6.0 and temperatures of 23 or 26± 1°C. Radial growth evaluations at 14 and 28 days of incubation can be recommended for substrate studies involving the symbiotic fungus.
Resumo:
Three culture media (Brucella agar, Farrell medium, and CITA) were compared for their effectiveness in inhibiting contamination and for isolating Brucella spp. One hundred lymph nodes from pigs (n = 50) and wild boars (n = 50) with lymphadenitis were collected in slaughterhouses in the State of Sao Paulo and were assessed on these three selective media for Brucella spp. All of the samples were negative for Brucella spp. on the three culture media. On the agar medium, fungal (70 plates) and Gram-positive bacterial (59 plates) contaminants were observed; in the CITA medium, the absence of fungal and Gram-positive bacteria on 15 plates was observed; no bacterial or fungal growth was observed on the Farrell media. The results demonstrated that the CITA and Farrell media inhibited the growth of contaminants better than the Brucella agar.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objective. To evaluate bacterial growth inhibition, mechanical properties, and compound release rate and stability of copolymers incorporated with anthocyanin (ACY; Vaccinium macrocarpon). Methods. Resin samples were prepared (Bis-GMA/TEGDMA at 70/30 mol%) and incorporated with 2 w/w% of either ACY or chlorhexidine (CHX), except for the control group. Samples were individually immersed in a bacterial culture (Streptococcus mutans) for 24 h. Cell viability (n = 3) was assessed by counting the number of colony forming units on replica agar plates. Flexural strength (FS) and elastic modulus (E) were tested on a universal testing machine (n = 8). Compound release and chemical stability were evaluated by UV spectrophotometry and (1)H NMR (n = 3). Data were analyzed by one-way ANOVA and Tukey's test ( α = 0.05). Results. Both compounds inhibited S. mutans growth, with CHX being most effective (P < 0.05). Control resin had the lowest FS and E values, followed by ACY and CHX, with statistical difference between control and CHX groups for both mechanical properties (P < 0.05). The 24 h compound release rates were ACY: 1.33 μg/mL and CHX: 1.92 μg/mL. (1)H NMR spectra suggests that both compounds remained stable after being released in water. Conclusion. The present findings indicate that anthocyanins might be used as a natural antibacterial agent in resin based materials.
Resumo:
This work describes the structural and piezoelectric assessment of aluminum nitride (AlN) thin films deposited by pulsed-DC reactive sputtering on insulating substrates. We investigate the effect of different insulating seed layers on AlN properties (crystallinity, residual stress and piezoelectric activity). The seed layers investigated, silicon nitride (Si3N4), silicon dioxide (SiO2), amorphous tantalum oxide (Ta2O5), and amorphous or nano-crystalline titanium oxide (TiO2) are deposited on glass plates to a thickness lower than 100 nm. Before AlN films deposition, their surface is pre-treated with a soft ionic cleaning, either with argon or nitrogen ions. Only AlN films grown of TiO2 seed layers exhibit a significant piezoelectric activity to be used in acoustic device applications. Pure c-axis oriented films, with FWHM of rocking curve of 6º, stress below 500 MPa, and electromechanical coupling factors measured in SAW devices of 1.25% are obtained. The best AlN films are achieved on amorphous TiO2 seed layers deposited at high target power and low sputtering pressure. On the other hand, AlN films deposited on Si3N4, SiO2 and TaOx exhibit a mixed orientation, high stress and very low piezoelectric activity, which invalidate their use in acoustic devices.
Resumo:
Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, it uses the electricity at the moment in which air humidity and temperature are optima to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system, rather than irrigating young plants in such a degree as to boost their growth, is to maintain them alive in the dryer periods.
Resumo:
2592 hand-colored engraved plates.
Resumo:
Plates numb. consecutively; Plates II, III, V, VI, IX, XII-XVI have outline diagrams on guard sheets.
Resumo:
Identical with 1st edition (London, Blackie & son; New York, Holt & co., 1894-95; issued in 4 half-vols.) except that the 16 colored plates contained in that edition are omitted.
Resumo:
Vol. 2 has title: England's improvement by sea and land. The second part : Containing, I. An account of its scituation, and the growths, and manufactures thereof. II. The benefit and necessity of a voluntary-register. III. A method for improving the Royal-navy, lessening the growing power of France, and obtaining the fishery. IV. Advantageous proposals for the city of London, for the preventing of fires therein; and for lessening the great charge of the trained bands. V. The way to make New-Haven in Sussex, fit to receive ships of burthen. VI. Seasonable discourses of the tin, iron, linnen, and woollen trades; with advantageous proposals for improving them all : Illustrated with seven large copper-plates / By Andrew Yarranton, gent. London : Printed, to be sold by Tho. Parkhurst ..., 1698.