Sequências de culturas em sistema de semeadura direta: I - produção de matéria seca e acúmulo de nutrientes

Em sistema de semeadura direta, os resíduos das culturas de entressafra são utilizados com as finalidades de proteger a superfície do solo dos agentes erosivos e de promover a ciclagem de nutrientes. O objetivo deste trabalho foi avaliar a produção de matéria seca e o acúmulo de nutrientes nos resíduos vegetais provenientes de diferentes sequências de culturas em semeadura direta. O experimento foi conduzido em Jaboticabal-SP (48° 18' W e 21° 15' S), em um Latossolo Vermelho eutrófico. O delineamento experimental foi em faixas, com três repetições. Os tratamentos foram constituídos pela combinação de três sequências de culturas de verão (rotação soja-milho e monoculturas de milho e de soja) com sete culturas de entressafra (milho, sorgo, girassol, crotalária, guandu, nabo forrageiro e milheto). O experimento iniciou-se em 2002, e o presente estudo refere-se aos anos agrícolas 2007/2008 e 2008/2009. Avaliaram-se as quantidades de matéria seca e o acúmulo de nutrientes pelas culturas. As culturas com colheita de grãos na entressafra (milho, sorgo e girassol) produziram resíduos com menor quantidade de nutrientes acumulados e em menor quantidade de matéria seca, quando comparadas às culturas com trituração no florescimento (crotalária, guandu, nabo forrageiro e milheto). Milheto e crotalária apresentaram as maiores produções de matéria seca e os maiores acúmulos de nutrientes. O milheto mostrou os maiores acúmulos de K e Mg, e a crotalária, maiores acúmulos de N e P. As gramíneas cultivadas na entressafra apresentaram maior desenvolvimento quando em sucessão ao cultivo de soja no verão anterior, com maior produção de matéria seca de milheto e, também, maior produtividade de grãos de milho e sorgo.

Fermentação ruminal de ovinos alimentados com alto concentrado e grãos de girassol ou gordura protegida

Seis ovinos machos, não castrados, da raça Santa Inês, com média de peso de 30kg, fistulados no rúmen, foram distribuídos em delineamento de quadrado-latino duplo (3x3). Três períodos e três dietas, uma controle, sem inclusão de fonte de lipídio, e duas com inclusão de grãos de girassol ou gordura protegida, foram testados quanto aos parâmetros ruminais. Foram verificadas diferenças (P<0,05) entre as dietas quanto à concentração ruminal de amônia (18mg/dL), mas não houve efeito sobre o pH (6,1), a produção total de ácidos graxos de cadeia curta (98mM), a proporção de acetato (66,4%), de propionato (20%) e de butirato (13%) e sobre a razão acetato:propionato (3,2:1). As bactérias sólido-aderidas isoladas do conteúdo ruminal dos animais recebendo a dieta-controle apresentaram maior teor de nitrogênio (10,7%) que as das dietas com gordura protegida (9,8%) ou com grãos de girassol (9,1%). A produção de nitrogênio pelas bactérias sólido-aderidas da dieta-controle (170mg/g) não diferiu da dieta com grãos de girassol (153mg/kg) ou com gordura protegida (160mg/kg). A inclusão de grãos de girassol ou gordura protegida na dieta com alto concentrado para ovinos propiciou ambiente adequado para fermentação ruminal.

Cinética digestiva e eficiência de síntese de proteína microbiana em novilhos alimentados com farelo de girassol e diferentes fontes energéticas

Objetivou-se avaliar o efeito da substituição parcial do milho pela casca de soja e pelo farelo de gérmen de milho sobre a produção e eficiência de síntese de proteína microbiana e sobre as taxas de diluição e passagem ruminal. Foram utilizados três novilhos de corte, mestiços, canulados no rúmen e no duodeno, distribuídos em dois delineamentos em quadrado latino 3 x 3. As dietas experimentais, à base de silagem de milho (60%), apresentavam como fonte de proteína farelo de girassol e, como fonte de energia, milho (MI) ou sua substituição parcial pela casca de soja (CS) ou pelo farelo de gérmen de milho (FGM). Para o isolamento da massa microbiana, foram coletadas amostras de conteúdo ruminal às 3, 6, 9 e 12 horas após a alimentação. Utilizaram-se RNA como marcador microbiano e dicromato de sódio e Co-EDTA como indicadores das taxas de passagem e de diluição, respectivamente. A composição dos microrganismos ruminais não foi influenciada pelas dietas experimentais ou pelos horários de coleta. Não houve diferenças significativas no fluxo de matéria orgânica, carboidratos totais, nitrogênio e nitrogênio microbiano para o duodeno e na eficiência de síntese de proteína microbiana. As taxas de diluição foram semelhantes entre as dietas, com média de 13,4%/h. A taxa de passagem da silagem de milho mordentada foi menor, com tendência de menor taxa de passagem também para o farelo de girassol na dieta MI. A casca de soja e o farelo de gérmen de milho podem substituir parcialmente o milho, proporcionando ambiente ruminal adequado ao desenvolvimento da flora microbiana e conseqüente produção de proteína microbiana ruminal em novilhos confinados.

Avaliação técnica e econômica da matriz nutricional da enzima fitase em rações contendo farelo de girassol para poedeiras comerciais

Cento e oitenta poedeiras comerciais Isa Brown, com 60 semanas de idade, foram distribuídas em delineamento inteiramente ao acaso, em esquema fatorial 2 õ 2, com dois níveis de fitase (0 e 500 ftu/kg de ração) e dois de farelo de girassol (4 e 8%), totalizando cinco dietas, avaliadas com seis repetições de seis aves. As dietas foram formuladas a partir de uma ração controle, à base de milho e farelo de soja, isenta de fitase e farelo de girassol, valorizando na formulação das dietas a matriz nutricional da fitase. O período experimental foi dividido em quatro ciclos de 28 dias cada. A matriz nutricional preconizada para fitase permitiu o atendimento pleno das exigências das aves, mesmo quando as dietas foram formuladas com níveis nutricionais reduzidos, isso quando desconsiderados os nutrientes presentes na matriz nutricional da enzima, de acordo com recomendação da empresa produtora. A adição de fitase na dieta reduz a excreção de fósforo pelas aves e melhora os parâmetros econômicos. A inclusão de farelo de girassol no nível de 8% prejudica a produção de ovos, mas não afeta os demais parâmetros de desempenho e qualidade dos ovos.

Remoção de óleo da água de produção por flotação em coluna utilizando tensoativos de origem vegetal

In the petroleum industry, water is always present in the reservoir formation together with petroleum and natural gas and this fact provokes the production of water with petroleum, resulting in a great environmental impact. Several methods can be applied for treatment of oily waters, such as: gravitational vases, granulated media filtration systems, flotation process, centrifugation process and the use of hydrocyclones, which can also be used in a combined way. However, the flotation process has showed a great efficiency as compared with other methods, because these methods do not remove great part of the emulsified oil. In this work was investigated the use of surfactants derived from vegetable oils, OSS and OGS, as collectors, using the flotation process in a glass column with a porous plate filter in its base for the input of the gaseous steam. For this purpose, oil/water emulsions were prepared using mechanical stirring, with concentrations around 300 ppm. The air flow rate was set at 700 cm3/min and the porous plate filter used for the generation of the air bubbles has pore size varying from 16 to 40 Pm. The column operated at constant volume (1500mL). A new methodology has been developed to collect the samples, where, instead of collecting the water phase, it was collected the oil phase removed by the process in the top of the flotation column. It has been observed that it is necessary to find an optimum surfactant concentration to achieve enhanced removal efficiency. Being for OSS 1.275 mmol/L and for OGS 0.840 mmol/L, with removal efficiencies of 93% and 99%, respectively, using synthetic solutions. For the produced water, the removal in these concentrations was 75% for OSS and 65% for OGS. It is possible to remove oil from water in a flotation process using surfactants of high HLB, fact that is against the own definition of HLB (Hydrophile-Lipophile Balance). The interfacial tension is an important factor in the oil removal process using a flotation process, because it has direct interference in the coalescence of the oil drops. The spreading of the oil of the air bubble should be considered in the process, and for the optimum surfactant concentrations it reached a maximum value. The removal kinetics for the flotation process using surfactants in the optimum concentration has been adjusted according to a first order model, for synthetic water as for the produced water.

Avaliação de híbridos de girassol e relação entre parâmetros produtivos e qualitativos

O presente estudo teve o objetivo de determinar genótipos superiores de girassol, bem como realizar estudos de correlação entre suas características. Avaliou-se seis híbridos de girassol em condições de safrinha no município de Palotina - PR. O estudo avaliou quinze variáveis: massa seca de folhas, massa seca de caule e pecíolos, massa seca total, área foliar, altura de planta, diâmetro de colmo, massa de grãos por capítulo, diâmetro de capítulo, percentagem de grãos normais, massa de mil grãos, número de grãos por capítulo, produtividade, teor de proteína bruta, teor de óleo e rendimento de óleo. Os dados direcionam os híbridos H360 e MG2 com boa produtividade e maior teor de óleo para a produção de óleo e os híbridos M734 e Aguará 3 para a alimentação animal, com boa produtividade e menor teor de óleo. As correlações entre produtividade e os componentes de produção foram de 0,62; 0,47; 0,60; 0,49 e 0,47 para massa de grãos por capítulo, diâmetro de capítulo, percentagem de grãos normais, massa de mil grãos e número de grãos por capítulo, respectivamente, concluindo que a seleção de materiais a partir desses componentes ocasionará a seleção de materiais promissores em produtividade.

Secagem de grãos de girassol em leito fixo e em leito de jorro

This work studies two methods for drying sunflower grains grown in the western region of Rio Grande do Norte, in the premises of the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte - IFRN - Campus Apodi. This initiative was made because of the harvested grain during the harvest, being stored in sheds without any control of temperature, humidity etc. Therewith, many physical, chemical and physiological characteristics are compromised and grains lose much quality for oil production as their germination power. Taking into account that most of the stored grain is used for replanting, the studied methods include drying of grains in a thin layer using an oven with air circulation (fixed bed) and drying in a spouted bed. It was studied the drying of grains in natura, i.e., newly harvested. The fixed bed drying was carried out at temperatures of 40, 50, 60 and 70°C. Experiments in spouted bed were performed based on an experimental design, 2² + 3, with three replications at the central point, where the independent variables were grains load (1500, 2000 and 2500 g) and the temperature of the inlet air (70, 80, and 90 °C), obtaining the drying and desorption equilibrium isotherms. Previously, the characteristic curves of the bed were obtained. Both in the fixed bed as in the spouted bed, drying and desorption curves were obtained by weighing the grains throughout the experiments and measurements of water activity, respectively. The grains drying in the spouted bed showed good results with significant reduction of processing time. The models of FICK and PAGE were fitted to the experimental data, models which will represent the drying of grains both in the fixed bed as in the spouted bed. The desorption curves showed no influence of the processing temperature in the hygroscopic characteristics of the grains. The models of GAB, OSWIN and LUIKOV could well represent the desorption isotherms

Efeito do nitrogenio na nutrição do girassol

Nitrogen (N), besides being one of the macro more absorbed by plants, is the that most limits the production of sunflower. The aim of this study was to evaluate the nutrient content in leaves, grains and nutrient export due to nitrogen levels in sunflower cultivation. A randomized experimental block design consisting of five treatments and four replications: T1 - 50 kg N ha(-1) divided by 10, 20 and 20 kg ha(-1), T2 - 70 kg N ha(-1) divided by 10, 30 and 30 kg ha(-1); T3 - 90 kg N ha(-1) divided by 10, 40 and 40 kg ha(-1), T4 - 110 kg N ha(-1) divided by 10, 50 and 50 kg ha(-1), T5 - 130 kg N ha(-1) divided by 10, 60 and 60 kg ha(-1). These applications were made in installments when sowing and 34 and 48 days after sowing. The parameters were evaluated in leaf nutrient content, nutrient content in grains and nutrient export. Under the experimental conditions it was found that the optimum foliar N were purchased at a dosage above 110 kg ha-1 N. With the increasing amount of N supplied in the sunflower crop was exported over this element, but not at the same rate of increase in dosage. The lowest dose of N the lowest rates of export of P, K, Mg, S, B, Cu, Mn and Zn, while increasing the dose of this nutrient decreased the export of Ca.

Avaliação do potencial fitorremediador da mamona (Ricinus communis L.) e girassol (Helianthus annuus L.) quanto à remoção de chumbo e tolueno em efluentes sintéticos.

The development of research that aim to reduce or even eliminate the environmental impacts provided by anthropogenic actions. One of these main action is the discard of industrial waste in the biotic compartments such as soil, water and air, gained more space in academic settings and in private. A technique of phytoremediation involving the use of plants (trees, shrubs, creepers and aquatic) and their associated microorganisms in order to remove, degrade or isolate toxic substances to the environment. This study aimed to evaluate the potential for phytoremediation of castor bean (Ricinus communis L.) and sunflower (Helianthus annuus L.), wild crops suitable region of Rio Grande do Norte, to reduce concentrations of lead and toluene present in synthetic wastewater that simulate the characteristics of treated water production originated in the petrochemical Guamaré. The experiment was accomplished in randomized blocks in four replicates. Seeds of BRS Energy for the development of seedlings of castor beans and sunflower for Catissol 01, both provided by EMPARN (Empresa de Pesquisa Agropecuária do Rio Grande do Norte) were used. Lead concentrations tested were 250, 500 and 1000 mg/L called T2, T3 and T4, respectively, for toluene the concentrations used were 125, 256 and 501 μg/L, called T5, T6 and T7, respectively. The data for removal of lead in relation to sewage systems applied in castor bean and sunflower were 43.89 and 51.85% (T2), 73.60 and 73.74% (T3) and 85.66 and 87.80 % (T4), respectively, and toluene were approximately 52.12 and 25.54% (T5), 55.10 and 58.05% (T6) and 79.77 and 74.76% (T7) for castor and sunflower seeds, respectively. From the data obtained, it can be deduce that mechanisms involved in reducing the contaminants were of phytoextraction, in relation to lead and phytodegradation for toluene. However, it can be concluded that the castor bean and sunflower crops can be used in exhaust after-treatment of industrial effluents that have this type of contaminant

Tratamento de água de produção de petróleo visando o aproveitamento na obtenção de barrilha

The petroleum production is associated to the produced water, which has dispersed and dissolved materials that damage not only the environment, but also the petroleum processing units. This study aims at the treatment of produced water focusing mainly on the removal of metals and oil and using this treated water as raw material for the production of sodium carbonate. Initially, it was addressed the removal of the following divalent metals: calcium, magnesium, barium, zinc, copper, iron, and cadmium. For this purpose, surfactants derived from vegetable oils, such as coconut oil, soybean oil, and sunflower oil, were used. The investigation showed that there is a stoichiometric relationship between the metals removed from the produced water and the surfactants used in the process of metals removal. It was also developed a model that correlates the hydrolysis constant of saponified coconut oil with the metal distribution between the resulting stages of the proposed process, flocs and aqueous phases, and relating the results with the pH of the medium. The correlation coefficient obtained was 0.963. Next, the process of producing washing soda (prefiro soda ahs ou sodium carbonate) started. The resulting water from the various treatment approaches from petroleum production water was used. During this stage of the research, it was observed that the surfactant assisted in the produced water treatment, by removing some metals and the dispersed oil entirety. The yield of sodium carbonate production was approximately 80%, and its purity was around 95%. It was also assessed, in the production of sodium carbonate, the influence of the type of reactor, using a continuous reactor and a batch reactor. These tests showed that the process with continuous reactor was not as efficient as the batch process. In general, it can be concluded that the production of sodium carbonate from water of oil production is a feasible process, rendering an effluent that causes a great environmental impact a raw material with large scale industrial use

Avaliação da estabilidade térmica e oxidativa dos biodieseis de algodão, girassol, dendê e sebo bovino

The search for new sources of environmentally friendly energy is growing every day. Among these alternative energies, biodiesel is a biofuel that has had prominence in world production. In Brazil, law 11.097, determine that all diesel sold in the country must be made by mixing diesel/biodiesel. The latter called BX, , where X represents the percent volume of biodiesel in the diesel oil, as specified by the ANP. In order to guarantee the quality of biodiesel and its mixtures, the main properties which should be controlled are the thermal and oxidative stability. These properties depend mainly of the chemical composition on the raw materials used to prepare the biodiesel. This dissertation aims to study the overall thermal and oxidative stability of biodiesel derived from cotton seed oil, sunflower oil, palm oil and beef tallow, as well as analyze the properties of the blends made from mineral oil and biodiesel in proportion B10. The main physical-chemical properties of oils and animal fat, their respective B100 and blends were determined. The samples were characterized by infrared and gas chromatography (GC). The study of thermal and oxidative stability were performed by thermogravimetry (TG), pressure differential scanning calorimeter (PDSC) and Rancimat. The obtained biodiesel samples are within the specifications established by ANP Resolution number 7/2008. In addition, all the blends and mineral diesel analyzed presented in conformed withthe ANP Regularion specifications number 15/2006. The obtained results from TG curves data indicated that the cotton biodiesel is the more stable combustible. In the kinetic study, we obtained the following order of apparent activation energy for the samples: biodiesel from palm oil > sunflower biodiesel > tallow biodiesel > cotton biodiesel. In terms of the oxidative stability, the two methods studied showed that biodiesel from palm oil is more stable then the tallow. Within the B100 samples studied only the latter were tound to be within the standard required by ANP resolution N° 7. Testing was carried out according to the EN14112. This higher stability its chemical composition

Craqueamento termocatalítico de óleo de girassol na presença da peneira molecular SAPO-5

The catalytic cracking of triglycerides presents itself as a possible alternative to the production of biofuels with low emission of pollutants. In this work were synthesized the SAPO-5, the catalysts for the cracking reaction of soybean oil is presented. The solids were powder X-ray diffraction (XRD), thermogravimetric analysis (TG/DTG) and infrared spectroscopy (FTIR). The analyses indicated that the synthesis method has employed to obtain materials with high surface area and high acid. The soybean oil thermal and thermal catalytic cracking, realized from the room temperature to 450 ºC in a simple distillation system, has allowed obtaining two liquid fractions, each consisting of two phases, one aqueous and another organic, organic liquid (OL). The OL obtained from first fractions has shown high acid index, even in the thermal catalytic process. The products obtained in the cracking of soybean oil were analyzed by distillation, acid number, infra-red spectroscopy, density, viscosity, carbon residue, cetane number determination and characterization. The analysis of the products obtained in the presence and in the absence of the SAPO-5 permitted to conclude that all the solids tested presented catalytic activity in the deoxygenation of final products only at the second step of the cracking process

Eficiência do processo de obtenção do biodiesel de girassol usando o catalisador KNO3/Al2O3

It is known that the head office world energetics is leaning in the fossil fuels. However, the world panorama is changing quickly, for linked reasons to three of the humanity's great concerns in that century beginning: environment, global economy and energy. The biodiesel production is based on the transesterificação of vegetable oils or animal fats, using catalysts homogeneous or heterogeneous. The process of heterogeneous transesterificação presents lower conversions in comparison with the homogeneous, however, it doesn't present corrosion problems and it reduces to the occurrence of parallel reactions as saponification. In this sense, this work has for purpose the synthesis of a heterogeneous catalyst, KNO3/Al2O3, that soon afterwards was used in the reaction of transesterificação of the oil of the Helianthus annuus L. (sunflower). The solid materials (it supports and catalyst) they were analyzed by diffraction of ray-X (XRD) and electronic microscope of sweeping (MEV). After the analysis of Al2O3, a structure monophase amorphous tetragonal was verified, with characteristic patterns of that material, what could not be visualized in the difratograma of the catalyst. The biodiesel obtained with 4% wt. of KNO3/Al2O3 it was what obtained a better cinematic viscosity 8,3 mm2/s, comparing with the norms of ANP, and it also presented the best conversion tax in ethyl ésteres, in accordance with the quantitative measure starting from TG, that was of 60%. While the biodiesel with 6% wt. and with 8% wt. of KNO3/Al2O3 it was it that no transesterificou, because it was observed in the analysis termogravimétrica of those two materials, a single thermal event, that it corresponds the decomposition or volatilization of the triglycerides

Síntese e caracterização de óxidos de zinco e de magnésio suportados em A1SBA-15 para produção de biodiesel

To overcome the challenge of meeting growing energy demand in a sustainable way, biodiesel has shown very promising as alternative energy can replace fossil fuels, even partially. Industrially, the biodiesel is produced by homogeneous transesterification reaction of vegetable oils in the presence of basic species used as catalysts. However, this process is the need for purification of the esters obtained and the removal of glycerin formed after the reaction. This context, the alternative catalysts have that can improve the process of biodiesel production, aiming to reduce costs and facilitate its production. In this study, the AlSBA-15 support with Si / Al ratio = 50 was synthesized, as like as the heterogeneous catalysts of zinc oxide and magnesium supported on mesoporous AlSBA-15 silica, in the concentrations of 5, 10, 15 and 30 %, relative to the support. The textural properties and structural characterization of catalysts and supports were determined by techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) coupled to the chemical analyzer, adsorption / desorption of N2, thermal analysis (TG / DTG), absorption spectroscopy in the infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Characterization results indicated that the support AlSBA-15 retained the hexagonal ordered after the incorporation of zinc oxide and magnesium oxide in the holder. For heterogeneous catalysts, ZnO-AlSBA-15, that was observed the presence of zinc oxide nanoparticles dispersed in the surface and interior channels of the mesoporous and microporous support. The catalytic activity was evaluated by the transesterification reaction of sunflower oil via methylic route, and some reaction parameters were optimized with the most active catalyst in biodiesel production by sunflower oil. For the series of heterogeneous catalysts, the sample with 30 % ZnO supported on AlSBA-15 showed a better conversion of triglyceride to methyl esters, about 95.41 % of reaction conditions: temperature 175 °C, with molar ratio of 42:1, stirring at 200 rpm and under a pressure of 14 bar for 6 h. The catalyst MgO-AlSBA-15 showed no catalytic activity in the studied reactions

A produção de biodiesel no assentamento Canudos RN: perspectivas e limites da inclusão social

The need to become energy self-sufficient a country with which Brazil has sought renewable energy sources due to the possibility of depletion of oil in coming decades. This paper will examine the perspective of social inclusion the latest energy plan developed by the Federal Government: the National Program of Biodiesel Production and Use - PNPB. It aims to find out whether that work with family farmers who participated in the PNPB socially included and what limits its inclusion. Secondly, the objective is to analyze the Brazilian biodiesel production and its uses. The methodology used for the preparation of this study was to examine the literature, visits to the study area, conducting interviews with the leadership of the settlement, questionnaires and semi-structured interviews with families producing sunflower. Finally, the research dealt with the statistical data. After analyzing the data was verified that the instrument PNPB is able to promote the social inclusion of family farmers, but this occurred in the initial stages because the families involved need a minimum framework of organization and infrastructure to develop activities related to biodiesel