Increasing trends of sleep complaints in the city of São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Maxillary and mandibular width changes studied using metallic implants.

The purpose of this implant study was to evaluate the transverse stability of the basal maxillary and mandibular structures. The sample included 25 subjects between 12 and 18 years of age who were followed for approximately 2.6 years. Metallic implants were placed bilaterally into the maxillary and mandibular corpora before treatment. Once implant stability had been confirmed, treatment (4 first premolar extractions followed by fixed appliance therapy) was initiated. Changes in the transverse maxillary and mandibular implants were evaluated cephalometrically and two groups (GROW+ and GROW++; selection based on growth changes in facial height and mandibular length) were compared. The GROW++ group showed significant width increases of the posterior maxillary implants (P <.001) and the mandibular implants (P =.009); there was no significant change for the anterior maxillary implants. The GROW+ group showed no significant width changes between the maxillary and mandibular implants. We conclude that (1) there are significant width increases during late adolescence of the basal mandibular and maxillary skeletal structures and (2) the width changes are related with growth potential.

Alterações do tecido mole, espaço faríngeo e estabilidade após avanço maxilo-mandibular xom rotação anti-horária e prótese total de ATM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morfometria de rainhas do gênero ATTA (Hymenoptera: Formicidae: Myrmicinae), arquitetura interna e infecção pelo fundo parasita Escovopsis de ninhos iniciais

Pós-graduação em Ciências Biológicas (Zoologia) - IBB

Incidence, aetiology and pattern of mandibular fractures in central Switzerland

The two major causative factors for mandibular fractures, as stated in the literature, are either interpersonal violence or motor vehicle accidents. The purpose of this study was to describe epidemiological trends of mandibular fractures in Switzerland. A special emphasis was directed towards the potential impact of socio-economic standards on the mechanism and pattern of mandible fractures.

Short-term secular change in height, body mass and Tanner-Whitehouse 3 skeletal maturity of Madeira youth, Portugal

Secular trends in height and weight are reasonably well documented in Europe. Corresponding observations for skeletal maturation are lacking. Aim: To assess secular trends in height, body mass and skeletal maturity of Portuguese children and adolescents and to provide updated reference values for skeletal maturity scores (SMSs). Subjects and methods: Data for 2856 children and adolescents of 4–17 years, 1412 boys and 1444 girls, from The ‘Madeira Growth Study’ (MGS; 1996–1998) and from the‘Healthy Growth of Madeira Children Study’ (CRES; 2006) were used. Height and body mass were measured. Skeletal maturity was assessed with the Tanner-Whitehouse 2 and 3 methods. Results: Children from CRES were taller and heavier than peers from MGS. Differences in height reached 5.8cm in boys and 5.5cm in girls. RUS SMSs did not differ consistently between surveys boys, while higher RUS scores were observed in CRES girls. Adult RUS SMSs for MGS and CRES combined were attained at 15.8 years in boys and 14.8 years in girls. Corresponding ages for adult Carpal SMSs were 14.4 and 14.0, respectively. Conclusion: The short-term trends for height and mass were not entirely consistent with the trends in RUS and Carpal SMSs and SAs.

Short-term secular change in height, body mass and Tanner-Whitehouse 3 skeletal maturity of Madeira youth, Portugal

Secular trends in height and weight are reasonably well documented in Europe. Corresponding observations for skeletal maturation are lacking. Aim: To assess secular trends in height, body mass and skeletal maturity of Portuguese children and adolescents and to provide updated reference values for skeletal maturity scores (SMSs). Subjects and methods: Data for 2856 children and adolescents of 4–17 years, 1412 boys and 1444 girls, from The ‘Madeira Growth Study’ (MGS; 1996–1998) and from the‘Healthy Growth of Madeira Children Study’ (CRES; 2006) were used. Height and body mass were measured. Skeletal maturity was assessed with the Tanner-Whitehouse 2 and 3 methods. Results: Children from CRES were taller and heavier than peers from MGS. Differences in height reached 5.8cm in boys and 5.5cm in girls. RUS SMSs did not differ consistently between surveys boys, while higher RUS scores were observed in CRES girls. Adult RUS SMSs for MGS and CRES combined were attained at 15.8 years in boys and 14.8 years in girls. Corresponding ages for adult Carpal SMSs were 14.4 and 14.0, respectively. Conclusion: The short-term trends for height and mass were not entirely consistent with the trends in RUS and Carpal SMSs and SAs.

Gender identification of five genera of stingless bees (Apidae, Meliponini) based on wing morphology

Currently, the identification of pollinators is a critical necessity of conservation programs. After it was found that features extracted from patterns of wing venation are sufficient to discriminate among insect species, various studies have focused on this structure. We examined wing venation patterns of males and workers of five stingless bee species in order to determine if there are differences between sexes and if these differences are greater within than between species. Geometric morphometric analyses were made of the forewings of males and workers of Nannotrigona testaceicornis, Melipona quadrifasciata, Frieseomelitta varia, and Scaptotrigona aff. depilis and Plebeia remota. The patterns of males and workers from the same species were more similar than the patterns of individuals of the same sex from different species, and the patterns of both males and workers, when analyzed alone, were sufficiently different to distinguish among these five species. This demonstrates that we can use this kind of analysis for the identification of stingless bee species and that the sex of the individual does not impede identification. Computer-assisted morphometric analysis of bee wing images can be a useful tool for biodiversity studies and conservation programs.

Use of Allogeneic Bone Graft in Maxillary Reconstruction for Installation of Dental implants

The aim of this study is to evaluate the efficacy of the application of allogenous bone at the maxillo-mandibular reconstructions for future rehabilitation with dental implants. The patients were submitted to reconstruction of maxilla, using allogeneic bone grafts, in 3 different techniques: onlay grafts for lateral ridge augmentation, onlay and particulate bone for sinus lift grafting, and particulate alone for sinus lift grafts. Clinical and radiographic control was done at the postoperative phase for at least 8 months, until the patient could be submitted to the installation of dental implants. The results showed success in the majority of the cases, and dental implants could be installed. This can be considered an excellent alternative when compared with the use of autogenous grafts; because handling is easier, there is a great amount of material available and a possibility of using local anesthesia, and consequently there is a reduction of patient morbidity. (C) 2008 American Association of Oral and Maxillofacial Surgeons

Sistema de modelização tridimensional para ambientes não estruturados

A navegação de veículos autónomos em ambientes não estruturados continua a ser um problema em aberto. A complexidade do mundo real ainda é um desafio. A difícil caracterização do relevo irregular, dos objectos dinâmicos e pouco distintos(e a inexistência de referências de localização) tem sido alvo de estudo e do desenvolvimento de vários métodos que permitam de uma forma eficiente, e em tempo real, modelizar o espaço tridimensional. O trabalho realizado ao longo desta dissertação insere-se na estratégia do Laboratório de Sistemas Autónomos (LSA) na pesquisa e desenvolvimento de sistemas sensoriais que possibilitem o aumento da capacidade de percepção das plataformas robóticas. O desenvolvimento de um sistema de modelização tridimensional visa acrescentar aos projectos LINCE (Land INtelligent Cooperative Explorer) e TIGRE (Terrestrial Intelligent General proposed Robot Explorer) maior autonomia e capacidade de exploração e mapeamento. Apresentamos alguns sensores utilizados para a aquisição de modelos tridimensionais, bem como alguns dos métodos mais utilizados para o processo de mapeamento, e a sua aplicação em plataformas robóticas. Ao longo desta dissertação são apresentadas e validadas técnicas que permitem a obtenção de modelos tridimensionais. É abordado o problema de analisar a cor e geometria dos objectos, e da criação de modelos realistas que os representam. Desenvolvemos um sistema que nos permite a obtenção de dados volumétricos tridimensionais, a partir de múltiplas leituras de um Laser Range Finder bidimensional de médio alcance. Aos conjuntos de dados resultantes associamos numa nuvem de pontos coerente e referenciada. Foram desenvolvidas e implementadas técnicas de segmentação que permitem inspeccionar uma nuvem de pontos e classifica-la quanto às suas características geométricas, bem como ao tipo de estruturas que representem. São apresentadas algumas técnicas para a criação de Mapas de Elevação Digital, tendo sido desenvolvida um novo método que tira partido da segmentação efectuada

International Conference on “Foresight Studies on Work in the Knowledge Society“ in Monte de Caparica (FCT-UNL) on 19-20 October 2006

On 19 and 20 October 2006, the Research Centre on Enterprise and Work Organisation (IET) organised the first international conference on “Foresight Studies on Work in the Knowledge Society”. It took place at the auditorium of the new Library of FCT-UNL and had the support of the research project “CodeWork@VO” (financed by FCT-MCTES and co-ordinated by INESC, Porto). The conference related to the European research project “Work Organisation and Restructuring in the Knowledge Society” (WORKS), which is financed by the European Commission. The main objective of the conference was to analyse and discuss research findings on the trends of work structures in the knowledge society, and to debate on new work organisation models and new forms of work supported by ICT.

The nymphs of Sigara (Tropocorixa) denseconscripta (Hemiptera, Heteroptera, Corixidae)

The nymphal instars I and III - V of Sigara (Tropocorixa) denseconscripta (Breddin, 1897) are figured and described in detail, for the first time, with emphasis on morphometry and chaetotaxy of selected structures. The useful characters to identify the nymphal instars and the nymphs of the species of Sigara are provided.

Streamlining the medication process improves safety in the intensive care unit.

BACKGROUND: Multiple interventions were made to optimize the medication process in our intensive care unit (ICU). 1 Transcriptions from the medical order form to the administration plan were eliminated by merging both into a single document; 2 the new form was built in a logical sequence and was highly structured to promote completeness and standardization of information; 3 frequently used drug names, approved units, and fixed routes were pre-printed; 4 physicians and nurses were trained with regard to the correct use of the new form. This study was aimed at evaluating the impact of these interventions on clinically significant types of medication errors. METHODS: Eight types of medication errors were measured by a prospective chart review before and after the interventions in the ICU of a public tertiary care hospital. We used an interrupted time-series design to control the secular trends. RESULTS: Over 85 days, 9298 lines of drug prescription and/or administration to 294 patients, corresponding to 754 patient-days were collected and analysed for the three series before and three series following the intervention. Global error rate decreased from 4.95 to 2.14% (-56.8%, P < 0.001). CONCLUSIONS: The safety of the medication process in our ICU was improved by simple and inexpensive interventions. In addition to the optimization of the prescription writing process, the documentation of intravenous preparation, and the scheduling of administration, the elimination of the transcription in combination with the training of users contributed to reducing errors and carried an interesting potential to increase safety.

Rhodnius robustus in Bolivia identified by its wings

Wings of a Rhodnius specimen from Alto Beni (Bolivia) was examined for identification and compared with R. stali, R. robustus, (certified Bolivian species), R. pictipes and R. prolixus (suspected Bolivian species). A projection of the unidentified wings as supplementary data into a discriminant analysis of shape revealed clear cut differences with R. stali and R. pictipes, less differences with R. prolixus, and none with R. robustus. Combining global size and shape of the wings, the unknown specimen was identified as R. robustus. Thus, this study confirmed the presence of R. robustus in Bolivia. It also highlighted the possibility of morphometrics to taxonomically interpret one individual, or even one piece of an individual, when related species data are available for comparison.