Collaborative geographic visualization

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente, perfil Gestão e Sistemas Ambientais

Exploratory geospatial data analysis using self-organizing maps

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

Hydrogeomechanics for rock engineering: coupling subsurface hydrogeomechanical assessement and hydrogeotechnical mapping on fracturated rock masses

The present work aims to achieve and further develop a hydrogeomechanical approach in Caldas da Cavaca hydromineral system rock mass (Aguiar da Beira, NW Portugal), and contribute to a better understanding of the hydrogeological conceptual site model. A collection of several data, namely geology, hydrogeology, rock and soil geotechnics, borehole hydraulics and hydrogeomechanics, was retrieved from three rock slopes (Lagoa, Amores and Cancela). To accomplish a comprehensive analysis and rock engineering conceptualisation of the site, a multi‐technical approach were used, such as, field and laboratory techniques, hydrogeotechnical mapping, hydrogeomechanical zoning and hydrogeomechanical scheme classifications and indexes. In addition, a hydrogeomechanical data analysis and assessment, such as Hydro‐Potential (HP)‐Value technique, JW Joint Water Reduction index, Hydraulic Classification (HC) System were applied on rock slopes. The hydrogeomechanical zone HGMZ 1 of Lagoa slope achieved higher hydraulic conductivities with poorer rock mass quality results, followed by the hydrogeomechanical zone HGMZ 2 of Lagoa slope, with poor to fair rock mass quality and lower hydraulic parameters. In addition, Amores slope had a fair to good rock mass quality and the lowest hydraulic conductivity. The hydrogeomechanical zone HGMZ 3 of Lagoa slope, and the hydrogeomechanical zones HGMZ 1 and HGMZ 2 of Cancela slope had a fair to poor rock mass quality but were completely dry. Geographical Information Systems (GIS) mapping technologies was used in overall hydrogeological and hydrogeomechanical data integration in order to improve the hydrogeological conceptual site model.

Delineating environmental groundwater vulnerability and protection zones mapping in fractured rock masses

Hard‐rock watersheds commonly exhibit complex geological bedrock and morphological features. Hydromineral resources have relevant economic value for the thermal spas industry. The present study aims to develop a groundwater vulnerability approach in Caldas da Cavaca hydromineral system (Aguiar da Beira, Central Portugal) which has a thermal tradition that dates back to the late 19th century, and contribute to a better understanding of the hydrogeological conceptual site model. In this work different layers were overlaid, generating several thematic maps to arrive at an integrated framework of several key‐sectors in Caldas da Cavaca site. Thus, to accomplish a comprehensive analysis and conceptualization of the site, a multi‐technical approach was used, such as, field and laboratory techniques, where several data was collected, like geotectonics, hydrology and hydrogeology, hydrogeomorphology, hydrogeophysical and hydrogeomechanical zoning aiming the application of the so‐called DISCO method. All these techniques were successfully performed and a groundwater vulnerability to contamination assessment, based on GOD‐S, DRASTIC‐Fm, SINTACS, SI and DISCO indexes methodology, was delineated. Geographical Information Systems (GIS) technology was on the basis to organise and integrate the geodatabases and to produce all the thematic maps. This multi‐technical approach highlights the importance of groundwater vulnerability to contamination mapping as a tool to support hydrogeological conceptualisation, contributing to better decision‐making of water resources management and sustainability.

DESARROLLO DE APLICACIONES ESTADÍSTICAS PARA LA AGRICULTURA DE PRECISIÓN. STATISTICAL APPLICATIONS FOR PRECISION AGRICULTURE

A partir de las últimas décadas se ha impulsado el desarrollo y la utilización de los Sistemas de Información Geográficos (SIG) y los Sistemas de Posicionamiento Satelital (GPS) orientados a mejorar la eficiencia productiva de distintos sistemas de cultivos extensivos en términos agronómicos, económicos y ambientales. Estas nuevas tecnologías permiten medir variabilidad espacial de propiedades del sitio como conductividad eléctrica aparente y otros atributos del terreno así como el efecto de las mismas sobre la distribución espacial de los rendimientos. Luego, es posible aplicar el manejo sitio-específico en los lotes para mejorar la eficiencia en el uso de los insumos agroquímicos, la protección del medio ambiente y la sustentabilidad de la vida rural. En la actualidad, existe una oferta amplia de recursos tecnológicos propios de la agricultura de precisión para capturar variación espacial a través de los sitios dentro del terreno. El óptimo uso del gran volumen de datos derivado de maquinarias de agricultura de precisión depende fuertemente de las capacidades para explorar la información relativa a las complejas interacciones que subyacen los resultados productivos. La covariación espacial de las propiedades del sitio y el rendimiento de los cultivos ha sido estudiada a través de modelos geoestadísticos clásicos que se basan en la teoría de variables regionalizadas. Nuevos desarrollos de modelos estadísticos contemporáneos, entre los que se destacan los modelos lineales mixtos, constituyen herramientas prometedoras para el tratamiento de datos correlacionados espacialmente. Más aún, debido a la naturaleza multivariada de las múltiples variables registradas en cada sitio, las técnicas de análisis multivariado podrían aportar valiosa información para la visualización y explotación de datos georreferenciados. La comprensión de las bases agronómicas de las complejas interacciones que se producen a la escala de lotes en producción, es hoy posible con el uso de éstas nuevas tecnologías. Los objetivos del presente proyecto son: (l) desarrollar estrategias metodológicas basadas en la complementación de técnicas de análisis multivariados y geoestadísticas, para la clasificación de sitios intralotes y el estudio de interdependencias entre variables de sitio y rendimiento; (ll) proponer modelos mixtos alternativos, basados en funciones de correlación espacial de los términos de error que permitan explorar patrones de correlación espacial de los rendimientos intralotes y las propiedades del suelo en los sitios delimitados. From the last decades the use and development of Geographical Information Systems (GIS) and Satellite Positioning Systems (GPS) is highly promoted in cropping systems. Such technologies allow measuring spatial variability of site properties including electrical conductivity and others soil features as well as their impact on the spatial variability of yields. Therefore, site-specific management could be applied to improve the efficiency in the use of agrochemicals, the environmental protection, and the sustainability of the rural life. Currently, there is a wide offer of technological resources to capture spatial variation across sites within field. However, the optimum use of data coming from the precision agriculture machineries strongly depends on the capabilities to explore the information about the complex interactions underlying the productive outputs. The covariation between spatial soil properties and yields from georeferenced data has been treated in a graphical manner or with standard geostatistical approaches. New statistical modeling capabilities from the Mixed Linear Model framework are promising to deal with correlated data such those produced by the precision agriculture. Moreover, rescuing the multivariate nature of the multiple data collected at each site, several multivariate statistical approaches could be crucial tools for data analysis with georeferenced data. Understanding the basis of complex interactions at the scale of production field is now within reach the use of these new techniques. Our main objectives are: (1) to develop new statistical strategies, based on the complementarities of geostatistics and multivariate methods, useful to classify sites within field grown with grain crops and analyze the interrelationships of several soil and yield variables, (2) to propose mixed linear models to predict yield according spatial soil variability and to build contour maps to promote a more sustainable agriculture.

Iniciativas para el desarrollo sostenible del Área de Conservación Arenal- Huetar Norte, Costa Rica

El presente proyecto tiene como zona de estudio el Área de Conservación Arenal- Huetar Norte (ACA-HN), concretamente los cantones de Upala, Los Chiles y Guatuso. El propósito del proyecto es promover el desarrollo sostenible de la zona mediante los pilares de la educación y la economía. Para ello se elabora un manual de educación ambiental de la cuenca de río Frío y así poder solventar algunas de las carencias en educación que tienen los docentes de las escuelas de la cuenca hidrográfica. Por otro lado, se diagnostica la cadena de valor sobre usos alternativos de la biodiversidad, específicamente zoocriaderos de mariposas diurnas, en los cantones de Upala y Los Chiles. Por último, se trata la información de la zona de estudio con Sistemas de Información Geográfica (SIG) para elaborar mapas que ilustren los proyectos anteriores y el proyecto sobre el diagnóstico de la industria de turismo local.

Aplicació dels sistemes d'informació geogràfica per gestionar informació cadastral

Aquest treball de final de carrera (TFC) constitueix un petit estudi dels sistemes d'informació geogràfica (SIG) per a gestionar una informació cadastral, i mira d'oferir una visió general dels SIG a qualsevol persona física o jurídica o a qualsevol ens públic o privat interessat en el tema. Així mateix, es vol despertar l'interès per aquests sistemes d'informació amb l'estudi més particularitzat d'una informació cadastral perquè aquesta pot proporcionar una informació més atractiva a un ampli sector de la població.

A geoprocessing approach for studying and controlling schistosomiasis in the state of Minas Gerais, Brazil

Geographical information systems (GIS) are tools that have been recently tested for improving our understanding of the spatial distribution of disease. The objective of this paper was to further develop the GIS technology to model and control schistosomiasis using environmental, social, biological and remote-sensing variables. A final regression model (R² = 0.39) was established, after a variable selection phase, with a set of spatial variables including the presence or absence of Biomphalaria glabrata, winter enhanced vegetation index, summer minimum temperature and percentage of houses with water coming from a spring or well. A regional model was also developed by splitting the state of Minas Gerais (MG) into four regions and establishing a linear regression model for each of the four regions: 1 (R² = 0.97), 2 (R² = 0.60), 3 (R² = 0.63) and 4 (R² = 0.76). Based on these models, a schistosomiasis risk map was built for MG. In this paper, geostatistics was also used to make inferences about the presence of Biomphalaria spp. The result was a map of species and risk areas. The obtained risk map permits the association of uncertainties, which can be used to qualify the inferences and it can be thought of as an auxiliary tool for public health strategies.

New tools for epidemiology: a space odyssey

Geographical Information Systems (GIS) facilitate access to epidemiological data through visualization and may be consulted for the development of mathematical models and analysis by spatial statistics. Variables such as land-cover, land-use, elevations, surface temperatures, rainfall etc. emanating from earth-observing satellites, complement GIS as this information allows the analysis of disease distribution based on environmental characteristics. The strength of this approach issues from the specific environmental requirements of those causative infectious agents, which depend on intermediate hosts for their transmission. The distribution of these diseases is restricted, both by the environmental requirements of their intermediate hosts/vectors and by the ambient temperature inside these hosts, which effectively govern the speed of maturation of the parasite. This paper discusses the current capabilities with regard to satellite data collection in terms of resolution (spatial, temporal and spectral) of the sensor instruments on board drawing attention to the utility of computer-based models of the Earth for epidemiological research. Virtual globes, available from Google and other commercial firms, are superior to conventional maps as they do not only show geographical and man-made features, but also allow instant import of data-sets of specific interest, e.g. environmental parameters, demographic information etc., from the Internet.

2008 Iowa Real Property Appraisal Manual, May 2008

********NOTE: There are nine sections to this manual, all in separate files.************* **********NOTE: Large files may take longer to open******** The basis of real property assessment in Iowa is market value as defined in Iowa Code §441.21. Iowa Code §§ 421.17(17) and 441.21(h) provide that assessment jurisdictions follow the guidelines and rules in this manual to help achieve uniformity in assessments. Assessors are encouraged to use the International Association of Assessing Officers’ Standard on Mass Appraisal of Real Property in their mass appraisal practices. Estimating market value in mass appraisal involves accurately listing properties, developing a sales file that includes the primary influences on market value, and developing models for subsets of properties that share common market influences using recognized mass appraisal techniques. The assessment of an individual property should not be based solely on the sale price. The Uniform Standards of Professional Appraisal Practice (USPAP) standard 6 says “In developing a mass appraisal, an appraiser must be aware of, understand, and correctly employ those recognized methods and techniques necessary to produce and communicate credible mass appraisals.” Accurate listing of property is the basis of a good mass appraisal program. On-site inspection and listing of property is essential in developing a good data base for revaluation. A physical review, including an on-site verification of property characteristics, should be conducted at least every four to six years. Land values should be reviewed every two years. Factors influencing the market of each property type should be identified and collected so that these factors can be considered in the mass appraisal model. It is equally important to maintain the data once it is collected. Accessing local government permit systems should be a part of a good data maintenance program along with an inspection program. Current cadastral maps and geographical information systems (GIS) are tools that are integral in checking accuracy of listings and maintaining a comprehensive data base.

Predictive analysis and mapping of indoor radon concentrations in Switzerland

It is estimated that around 230 people die each year due to radon (222Rn) exposure in Switzerland. 222Rn occurs mainly in closed environments like buildings and originates primarily from the subjacent ground. Therefore it depends strongly on geology and shows substantial regional variations. Correct identification of these regional variations would lead to substantial reduction of 222Rn exposure of the population based on appropriate construction of new and mitigation of already existing buildings. Prediction of indoor 222Rn concentrations (IRC) and identification of 222Rn prone areas is however difficult since IRC depend on a variety of different variables like building characteristics, meteorology, geology and anthropogenic factors. The present work aims at the development of predictive models and the understanding of IRC in Switzerland, taking into account a maximum of information in order to minimize the prediction uncertainty. The predictive maps will be used as a decision-support tool for 222Rn risk management. The construction of these models is based on different data-driven statistical methods, in combination with geographical information systems (GIS). In a first phase we performed univariate analysis of IRC for different variables, namely the detector type, building category, foundation, year of construction, the average outdoor temperature during measurement, altitude and lithology. All variables showed significant associations to IRC. Buildings constructed after 1900 showed significantly lower IRC compared to earlier constructions. We observed a further drop of IRC after 1970. In addition to that, we found an association of IRC with altitude. With regard to lithology, we observed the lowest IRC in sedimentary rocks (excluding carbonates) and sediments and the highest IRC in the Jura carbonates and igneous rock. The IRC data was systematically analyzed for potential bias due to spatially unbalanced sampling of measurements. In order to facilitate the modeling and the interpretation of the influence of geology on IRC, we developed an algorithm based on k-medoids clustering which permits to define coherent geological classes in terms of IRC. We performed a soil gas 222Rn concentration (SRC) measurement campaign in order to determine the predictive power of SRC with respect to IRC. We found that the use of SRC is limited for IRC prediction. The second part of the project was dedicated to predictive mapping of IRC using models which take into account the multidimensionality of the process of 222Rn entry into buildings. We used kernel regression and ensemble regression tree for this purpose. We could explain up to 33% of the variance of the log transformed IRC all over Switzerland. This is a good performance compared to former attempts of IRC modeling in Switzerland. As predictor variables we considered geographical coordinates, altitude, outdoor temperature, building type, foundation, year of construction and detector type. Ensemble regression trees like random forests allow to determine the role of each IRC predictor in a multidimensional setting. We found spatial information like geology, altitude and coordinates to have stronger influences on IRC than building related variables like foundation type, building type and year of construction. Based on kernel estimation we developed an approach to determine the local probability of IRC to exceed 300 Bq/m3. In addition to that we developed a confidence index in order to provide an estimate of uncertainty of the map. All methods allow an easy creation of tailor-made maps for different building characteristics. Our work is an essential step towards a 222Rn risk assessment which accounts at the same time for different architectural situations as well as geological and geographical conditions. For the communication of 222Rn hazard to the population we recommend to make use of the probability map based on kernel estimation. The communication of 222Rn hazard could for example be implemented via a web interface where the users specify the characteristics and coordinates of their home in order to obtain the probability to be above a given IRC with a corresponding index of confidence. Taking into account the health effects of 222Rn, our results have the potential to substantially improve the estimation of the effective dose from 222Rn delivered to the Swiss population.

Propuesta de implementación del cultivo del manzano (Malus domestica) en la Vall d'Alinyà : análisis de viabilidad ambiental-económica y certificación de créditos voluntarios de carbono

El presente proyecto tiene por objetivo realizar una propuesta de cultivo de manzano (Malus domestica) en la Vall d’Alinyà para el desarrollo de un producto agroalimentario que contribuya a la revitalización de esta área rural y a la mitigación del calentamiento global. Para ello, se pretende proporcionar una metodología para calcular, con mayor precisión, el comportamiento de los cultivos como sumidero de carbono a partir del balance neto de gases con efecto invernadero (GEI) del sistema. Con tal de obtener las emisiones de GEI generadas por los cultivos se desarrolla un análisis del ciclo de vida (ACV), y para obtener la fijación de los cultivos, se realiza un análisis de su capacidad de absorción de dióxido de carbono en la biomasa de la plantación. Además, mediante el uso de sistemas de información geográfica (SIG), se determinaron los terrenos potenciales para el cultivo del manzano en la zona de estudio. Posteriormente, se verifica la certificación de créditos en el mercado de carbono voluntario y se analiza la viabilidad económica del proyecto, obteniendo así un producto (la manzana) con valor ambiental añadido. Como conclusión se obtuvo una viabilidad positiva de la verificación de créditos, puesto que el balance neto de carbono fue positivo, absorbiéndose 234,54 t CO2 en todo el territorio potencialmente cultivable (16,92 ha) y durante 15 años de actividad agrícola. Al mismo tiempo, la propuesta resultó viable económicamente, generándose unos beneficios ligados a la venta de producción frutícola y de los créditos de carbono de 79.484 € durante los 15 años de actividad productiva.

Contribució al coneixement de variables geoambientals en l'àmbit de la Costa Brava (Girona)

La tesi doctoral desenvolupada, emmarcada dins del camp de les Ciències Ambientals, aplica la Geologia Ambiental orientada al coneixement dels processos i recursos geològics de cara a la planificació i a l'ordenació del territori. Com a zona d'estudi s'ha seleccionat la Costa Brava meridional, concretament tota l'àrea litoral compresa per les conques hidrogràfiques de l'Aubi, riera de Calonge, Ridaura, riera de Tossa i riera de Lloret (75 km de línia de costa i una extensió de 291 km2). Aquest treball, amb l'aptitud integradora dels conceptes i mètodes propis de les Ciències Geològiques i Ambientals, s'ha proposat com a objectius globals l'anàlisi de la qualitat i del comportament físic i químic dels materials terrestres en front les accions humanes i de la seva utilització com a recursos; l'estudi dels processos naturals i de la influència que puguin tenir sobre l'home o bé els efectes que aquest pot causar sobre aquells, i per últim, com a derivació dels anteriors, el disseny i aplicació d'instruments de tipus preventiu en la gestió del territori; és a dir, la planificació dels usos del territori. Amb la filosofia de recerca basada en que els factor geològics són uns elements d'ajuda per a la visió integral d'un territori, s'han estudiat diferents variables geoambientals procurant traduir el coneixement del medi en informació apta per a la presa de decisions sobre l'ús i preservació d'aquest àmbit litoral. Els Sistemes d'Informació Geogràfica (SIG) han estat clau per a la visió sistèmica del territori, per a la integració de les diferents variables geoambientals, així com per a la producció cartogràfica temàtica i final. Pel que fa als processos geològics, lligats a la dinàmica fluviotorrencial, s'han cartografiat les principals àrees d'actuació així com analitzat els factors que inicien, afavoreixen o magnifiquen la seva ocurrència. S'han estudiat les accions denudatives, els processos de transport-sedimentació i amb l'estudi integrat d'aquests processos i formes resultants s'han identificat unitats territorials caracteritzades per un comportament geomòrfic uniforme. En quant a l'anàlisi dels recursos geològics s'ha aprofundit en el coneixement dels recursos hídrics subterranis, les roques industrials i els georecursos litorals. Pel que fa als primers s'ha centrat en la delimitació de les principals unitats i subunitats aqüíferes, així com en acotar les geometries i principals característiques hidràuliques. Pel que fa als àrids i roques de construcció l'objectiu fonamental ha estat la delimitació cartogràfica d'aquells materials que per les seves propietats fisicoquímiques són potencialment aptes per als usos indicats. Finalment s'ha fet una recerca orientada a l'estudi de factors que limiten o condicionen el potencial geoturístic d'aquesta àrea litoral, concretament en els penya-segats i les platges. Les principals aportacions d'aquesta tesi doctoral es poden emmarcar en l'àmbit regional i fenomenològic, aspectes clau en la gestió i planificació territorial. Pel que fa al primer, destaquem l'aportació de dades geoambientals a nivell cartogràfic en relació a variables litoestructurals, de processos dinàmics com de recursos geològics. Des del punt de vista de l'àmbit fenomenològic destaquem la interacció de les variables estudiades a nivell de conca hidrogràfica, com són, entre d'altres, les relacions existents entre les diferents formacions aqüíferes; la possible participació de les aigües subterrànies en la resposta hidrològica del sistema fluviotorrencial, o la problemàtica derivada de l'antropització de la sorra de la platja com a conseqüència d'abocaments de terres i residus inerts als marges de les rieres.

Integração de dados em ambiente SIG para mapeamento de favorabilidade mineral de ouro na ilha cristalina de Rivera (Uruguai)

Guias para exploração mineral são normalmente baseados em modelos conceituais de depósitos. Esses guias são, normalmente, baseados na experiência dos geólogos, em dados descritivos e em dados genéticos. Modelamentos numéricos, probabilísticos e não probabilísticos, para estimar a ocorrência de depósitos minerais é um novo procedimento que vem a cada dia aumentando sua utilização e aceitação pela comunidade geológica. Essa tese utiliza recentes metodologias para a geração de mapas de favorablidade mineral. A denominada Ilha Cristalina de Rivera, uma janela erosional da Bacia do Paraná, situada na porção norte do Uruguai, foi escolhida como estudo de caso para a aplicação das metodologias. A construção dos mapas de favorabilidade mineral foi feita com base nos seguintes tipos de dados, informações e resultados de prospecção: 1) imagens orbitais; 2) prospecção geoquimica; 3) prospecção aerogeofísica; 4) mapeamento geo-estrutural e 5) altimetria. Essas informacões foram selecionadas e processadas com base em um modelo de depósito mineral (modelo conceitual), desenvolvido com base na Mina de Ouro San Gregorio. O modelo conceitual (modelo San Gregorio), incluiu características descritivas e genéticas da Mina San Gregorio, a qual abrange os elementos característicos significativos das demais ocorrências minerais conhecidas na Ilha Cristalina de Rivera. A geração dos mapas de favorabilidade mineral envolveu a construção de um banco de dados, o processamento dos dados, e a integração dos dados. As etapas de construção e processamento dos dados, compreenderam a coleta, a seleção e o tratamento dos dados de maneira a constituírem os denominados Planos de Informação. Esses Planos de Informação foram gerados e processados organizadamente em agrupamentos, de modo a constituírem os Fatores de Integração para o mapeamento de favorabilidade mineral na Ilha Cristalina de Rivera. Os dados foram integrados por meio da utilização de duas diferentes metodologias: 1) Pesos de Evidência (dirigida pelos dados) e 2) Lógica Difusa (dirigida pelo conhecimento). Os mapas de favorabilidade mineral resultantes da implementação das duas metodologias de integração foram primeiramente analisados e interpretados de maneira individual. Após foi feita uma análise comparativa entre os resultados. As duas metodologias xxiv obtiveram sucesso em identificar, como áreas de alta favorabilidade, as áreas mineralizadas conhecidas, além de outras áreas ainda não trabalhadas. Os mapas de favorabilidade mineral resultantes das duas metodologias mostraram-se coincidentes em relação as áreas de mais alta favorabilidade. A metodologia Pesos de Evidência apresentou o mapa de favorabilidade mineral mais conservador em termos de extensão areal, porém mais otimista em termos de valores de favorabilidade em comparação aos mapas de favorabilidade mineral resultantes da implementação da metodologia Lógica Difusa. Novos alvos para exploração mineral foram identificados e deverão ser objeto de investigação em detalhe.

Diagnóstico geoambiental com uso do geoprocessamento visando a determinação de potencialidades de uso do solo para a área estuarina do Rio Curimataú - Canguaretama(RN)

The activities developed in the coastal zone always arise the researchers interest, mainly when it is developed in fragile ecological areas, not observing the sustenable development laws. In this context, the analysis presented developed around the estuary of Curimatau river, located in the Eastern coast of Rio Grande do Norte state, integrates information provided by high resolution images of orbital remote sensing (IKONOS II, dated of July of 2003) and images of not-orbital remote sensing (Air photographs of DPU, dated of March of 1997) in a multitemporary perspective, diagnosising patterns of use and occupation, evaluating the main area´s impacts, together with the estuarian region fisiograph of Curimatau river. The use of high resolution images consequently allowed generates a precision cartography, facilitating the quantification of the evolution of the landscape and supporting decisions. Was possible yet, the definition of use areas, conservation areas and preservation areas; that were inserted in the concept of Potentialities: a fundamental element to management of vulnerable areas of the natural point of view. The information provided during the research had been stored in an Enviromental Georreferenced Data Base, constructed under the optics of Geographical Information Systems (GIS), that they facilitate the environment management Through fast access to information. The results were satisfactory, because permits the quantification of evolution of the landscape and the mapping. Beyond the geoenviromental diagnosis, was possible develop maps and matrixes that support the Rio Grande do Norte state costal Management.