Investigation of anti-lock braking strategies for heavy goods vehicles

An articulated lorry was instrumented in order to measure its performance in straight-line braking. The trailer was fitted with two interchangeable tandem axle sub-chassis, one with an air suspension and the other with a steel monoleaf four-spring suspension. The brakes were only applied to the trailer axles, which were fitted with anti-lock braking systems (ABS), with the brake torque controlled in response to anticipated locking of the leading axle of the tandem. The vehicle with the air suspension was observed to have significantly better braking performance than the steel suspension, and to generate smaller inter-axle load transfer and smaller vertical dynamic tyre forces. Computer models of the two suspensions were developed, including their brakes and anti-lock systems. The models were found to reproduce most of the important features of the experimental results. It was concluded that the poor braking performance of the steel four-spring suspension was mainly due to interaction between the ABS and inter-axle load transfer effects. The effect of road roughness was investigated and it was found that vehicle stopping distances can increase significantly with increasing road roughness. Two alternative anti-lock braking control strategies were simulated. It was found that independent sensing and actuation of the ABS system on each wheel greatly reduced the difference in stopping distances between the air and steel suspensions. A control strategy based on limiting wheel slip was least susceptible to the effects of road roughness.

Mapping the global flow of steel: from steelmaking to end-use goods.

Our society is addicted to steel. Global demand for steel has risen to 1.4 billion tonnes a year and is set to at least double by 2050, while the steel industry generates nearly a 10th of the world's energy related CO₂ emissions. Meeting our 2050 climate change targets would require a 75% reduction in CO₂ emissions for every tonne of steel produced and finding credible solutions is proving a challenge. The starting point for understanding the environmental impacts of steel production is to accurately map the global steel supply chain and identify the biggest steel flows where actions can be directed to deliver the largest impact. In this paper we present a map of global steel, which for the first time traces steel flows from steelmaking, through casting, forming, and rolling, to the fabrication of final goods. The diagram reveals the relative scale of steel flows and shows where efforts to improve energy and material efficiency should be focused.

Mapping the global flow of aluminum: from liquid aluminum to end-use goods.

Demand for aluminum in final products has increased 30-fold since 1950 to 45 million tonnes per year, with forecasts predicting this exceptional growth to continue so that demand will reach 2-3 times today's levels by 2050. Aluminum production uses 3.5% of global electricity and causes 1% of global CO2 emissions, while meeting a 50% cut in emissions by 2050 against growing demand would require at least a 75% reduction in CO2 emissions per tonne of aluminum produced--a challenging prospect. In this paper we trace the global flows of aluminum from liquid metal to final products, revealing for the first time a complete map of the aluminum system and providing a basis for future study of the emissions abatement potential of material efficiency. The resulting Sankey diagram also draws attention to two key issues. First, around half of all liquid aluminum (~39 Mt) produced each year never reaches a final product, and a detailed discussion of these high yield losses shows significant opportunities for improvement. Second, aluminum recycling, which avoids the high energy costs and emissions of electrolysis, requires signification "dilution" (~ 8 Mt) and "cascade" (~ 6 Mt) flows of higher aluminum grades to make up for the shortfall in scrap supply and to obtain the desired alloy mix, increasing the energy required for recycling.

Strategies to reduce the carbon footprint of consumer goods by influencing stakeholders

Consumer goods contribute to anthropogenic climate change across their product life cycles through carbon emissions arising from raw materials extraction, processing, logistics, retail and storage, through to consumer use and disposal. How can consumer goods manufacturers make stepwise reductions in their product life cycle carbon emissions by engaging with, and influencing their main stakeholders? A semi-structured interview approach was used: to identify strategies and actions, stakeholders in the consumer goods industry (suppliers, manufacturers, retailers and NGOs) were interviewed about carbon emissions reduction projects. Based on this, a summarising presentation was made, which was shared during a second round of interviews to validate and refine the results. The results demonstrate several opportunities that have not yet been exploited by companies. These include editing product choice in stores to remove products with higher carbon footprints, using marketing competences for environmental benefits, and bundling competences to create winewinewin business models. Governments and NGOs have important enabling roles to accelerate industry change. Although this work was initially developed to explore how companies can reduce life cycle carbon emissions of their products, these strategies and actions also give insights on how companies can influence and anticipate stakeholder actions in general. © 2012 Elsevier Ltd. All rights reserved.

Exploring the relationship between social network sites and the consumption of cultural goods through the lens of affordances

This thesis presents research theorising the use of social network sites (SNS) for the consumption of cultural goods. SNS are Internet-based applications that enable people to connect, interact, discover, and share user-generated content. They have transformed communication practices and are facilitating users to present their identity online through the disclosure of information on a profile. SNS are especially effective for propagating content far and wide within a network of connections. Cultural goods constitute hedonic experiential goods with cultural, artistic, and entertainment value, such as music, books, films, and fashion. Their consumption is culturally dependant and they have unique characteristics that distinguish them from utilitarian products. The way in which users express their identity on SNS is through the sharing of cultural interests and tastes. This makes cultural good consumption vulnerable to the exchange of content and ideas that occurs across an expansive network of connections within these social systems. This study proposes the lens of affordances to theorise the use of social network sites for the consumption of cultural goods. Qualitative case study research using two phases of data collection is proposed in the application of affordances to the research topic. The interaction between task, technology, and user characteristics is investigated by examining each characteristic in detail, before investigating the actual interaction between the user and the artifact for a particular purpose. The study contributes to knowledge by (i) improving our understanding of the affordances of social network sites for the consumption of cultural goods, (ii) demonstrating the role of task, technology and user characteristics in mediating user behaviour for user-artifact interactions, (iii) explaining the technical features and user activities important to the process of consuming cultural goods using social network sites, and (iv) theorising the consumption of cultural goods using SNS by presenting a theoretical research model which identifies empirical indicators of model constructs and maps out affordance dependencies and hierarchies. The study also provides a systematic research process for applying the concept of affordances to the study of system use.

Public goods in networks

This paper considers incentives to provide goods that are non-excludable along social or geographic links. We find, first, that networks can lead to specialization in public good provision. In every social network there is an equilibrium where some individuals contribute and others free ride. In many networks, this extreme is the only outcome. Second, specialization can benefit society as a whole. This outcome arises when contributors are linked, collectively, to many agents. Finally, a new link increases access to public goods, but reduces individual incentives to contribute. Hence, overall welfare can be higher when there are holes in a network. © 2006 Elsevier Inc. All rights reserved.

Burning a hole in the budget: tobacco spending and its crowd-out of other goods.

Smoking is an expensive habit. Smoking households spend, on average, more than $US1000 annually on cigarettes. When a family member quits, in addition to the former smoker's improved long-term health, families benefit because savings from reduced cigarette expenditures can be allocated to other goods. For households in which some members continue to smoke, smoking expenditures crowd-out other purchases, which may affect other household members, as well as the smoker. We empirically analyse how expenditures on tobacco crowd-out consumption of other goods, estimating the patterns of substitution and complementarity between tobacco products and other categories of household expenditure. We use the Consumer Expenditure Survey data for the years 1995-2001, which we complement with regional price data and state cigarette prices. We estimate a consumer demand system that includes several main expenditure categories (cigarettes, food, alcohol, housing, apparel, transportation, medical care) and controls for socioeconomic variables and other sources of observable heterogeneity. Descriptive data indicate that, comparing smokers to nonsmokers, smokers spend less on housing. Results from the demand system indicate that as the price of cigarettes rises, households increase the quantity of food purchased, and, in some samples, reduce the quantity of apparel and housing purchased.

Public goods and procreation.

Procreation is the ultimate public goods problem. Each new child affects the welfare of many other people, and some (but not all) children produce uncompensated value that future people will enjoy. This essay addresses challenges that arise if we think of procreation and parenting as public goods. These include whether individual choices are likely to lead to a socially desirable outcome, and whether changes in laws, social norms, or access to genetic engineering and embryo selection might improve the aggregate outcome of our reproductive choices.