Improved Equivalent Frame Analysis Method for Flat Plate Structures in Vicinity of Edge Columns

This paper proposes a modification to the ACI 318-02 equivalent frame method of analysis of reinforced concrete flat plate exterior panels. Two existing code methods were examined: ACI 318 and BS 8110. The derivation of the torsional stiffness of the edge strip as proposed by ACI 318 is examined and a more accurate estimate of this value is proposed, based on both theoretical analysis and experimental results. A series of 1/3-scale models of flat plate exterior panels have been tested. Unique experimental results were obtained by measuring strains in reinforcing bars at approximately 200 selected locations in the plate panel throughout the entire loading history. The measured strains were used to calculate curvature and, hence, bending moments; these were used along with moments in the columns to assess the accuracy of the equivalent frame methods. The proposed method leads to a more accurate prediction of the moments in the plate at the column front face, at the panel midspan, and in the edge column. Registered Subscribers: View the full article. This document is available as a free download to qualified members. An electronic (PDF) version is available for purchase and download. Click on the Order Now button to continue with the download.

Processos carioevolutivos na ordem tetraodontiformes: uma visão através de suas diferentes linhagens

Given the great diversity of fishes, the Order Tetraodontiformes stands to show genetic and morphological characteristics enough singular. The fishes of this order have a compact DNA which favors molecular studies, as well as comparisons with more basal species. Model of genome evolution, there are still many gaps in knowledge about their chromosomal patterns and how evolutionary rearrangements influence the marked variation in DNA content of this order. In view of this, we present cytogenetic analyzes of the species Acanthostracion quadricornis (Ostraciidae), A. polygonius (Ostraciidae) Melichthys niger (Balistidae) Cantherhines macrocerus (Monacanthidae) and C. pullus (Monacanthidae), Lagocephalus laevigatus, Colomesus psittacus and Canthigaster figueiredoi (Tetraodontidae), to contribute with cytogenetic data for this group. The analysis was performed by C-banding, Ag-RONs, coloring with base-specific fluorochromes DAPI-CMA3, restriction enzymes AluI, EcoRI, TaqI, PstI and HinfI and in situ hybridization with probes for ribosomal DNA 18S and 5S. The heterochromatic ultrastructure of A. quadricornis and A. polygonius revealed a outstanding heterochromatin content, which may indicate that the accumulation or loss of extensive heterochromatin content could be responsible for large variations in genomic content displayed in different Tetraodontiformes families. The species Cantherhines macrocerus, C. pullus (Monacanthidae) and Melichthys niger (Balistidae) shows a huge karyotypic similarity both numerically and structural. L. laevigatus showed similar cytogenetic features (2n = 44 and single RONs) to the species of the genus Takifugu, which reinforces the idea of their phylogenetic relationships. C. psittacus presented the highest diploid number described for the family (2n = 56) and large amount of HC, features that related with its sister family Diodontidae. Cytogenetic analysis in C. figueiredoi revealed heterochromatic polymorphisms, RONs multiple and Bs chromosomes. These events are rare in marine fishes, and are possibly associated with the strong restructuring and genomic reduction that this family has been suffered. These features, plus the morphological and molecular data suggests that these species share the same ancestral branch, with a possible monophyletic origin. In this study, new contributions to the knowledge of evolutionary patterns facing by Tetraodontiformes are provided and discussed under cytotaxonomyc, genomic and evolutionary perspectives.

On the incorporation of the non-steroidal anti-inflammatory naproxen into cationic O/W microemulsions

Microemulsions (ME) containing hexadecyltrimethylammonium bromide (HTAB)/ethanol as surfactant, isopropylmyristate (IM) or butylstearate (BS) as oil phase and aqueous buffer were studied. Pseudo-ternary phase diagrams of the investigated systems were obtained at constant surfactant/cosurfactant molar ratio (1:5) by titration in order to characterize the proportions between the components to obtain clear systems. Oil in water microemulsions were prepared in a wide range of phase volume (phi). UV-vis absorption spectra of naproxen at pH 5.5 showed that the solubility of Np increases significantly in the presence of O/W ME in high phase volumes. For both, IM and BS microemulsions, the dynamic light scattering experiments showed that the size of the oil droplets remains constant in low values of phi, increasing abruptly in high phi values. Phase solubility study revealed that for both IM and BS microemulsions, the drug incorporation followed a straight-line profile in all range of phi. The data could be analyzed through the phase-separation model and the association constants (K) calculated varied from 27 to 90 M-1, depending on the pH and on the microemulsion oil phase. (c) 2005 Elsevier B.V. All rights reserved.

Estudo dos cortes da carcaça de cordeiros Santa Inês puros e cruzas Santa Inês com Texel, Ile de France e Bergamácia

Foram utilizados 103 cordeiros, machos e fêmeas, Santa Inês puros (SS) e cruzas Santa Inês com Texel (TS), Ile de France (FS) e Bergamácia (BS), confinados em gaiolas individuais. Os cordeiros foram abatidos em quatro pesos: 15,0; 25,0; 35,0 e 45,0 kg de peso vivo. Após o abate e resfriamento da carcaça, foram feitos os seguintes cortes e calculadas as porcentagens em relação ao peso da carcaça fria: pescoço (PP), costela/fralda (PCF), costeleta (PC), lombo (PL), paleta (PPA) e perna (PPE), sendo esses dois últimos sem os braços. Os pescoços praticamente não variaram com o aumento dos pesos de abate. Os pescoços dos cordeiros TS e FS foram menores, comparados aos dos cordeiros SS e BS, na maioria dos pesos de abate estudados. A paleta também não variou com o aumento dos pesos de abate, havendo tendência para diminuição. Aos 45 kg, os cordeiros TS e FS apresentaram PPA maiores em relação aos cordeiros SS e BS. Nos outros pesos de abate, praticamente não houve diferenças para PPA entre os grupos genéticos. A costela/fralda elevou-se com o aumento dos pesos de abate, sendo que, em pesos de abate elevados, os cordeiros TS mostraram maiores proporções. Para a PC, praticamente não houve diferenças entre os pesos de abate. As fêmeas FS, entretanto, aos 35 e 45 kg, apresentaram menores PCF que os machos FS. O lombo tendeu a elevar-se com o aumento dos pesos de abate, mas foram detectadas diferenças para os animais abatidos aos 15 kg, em relação aos outros pesos de abate. Entre os grupos genéticos, praticamente não houve diferenças para PL. As pernas diminuíram com o aumento dos pesos de abate. Aos 35 kg de peso vivo, os cordeiros machos TS e as fêmeas FS obtiveram melhores PPE em relação aos outros grupos genéticos.

Aplicação de indicadores e índices para avaliar a sustentabilidade ambiental em um sistema de aquicultura integrado e multitrófico com diferentes substratos

Pós-graduação em Aquicultura - FCAV

Desempenho, características de carcaça e modelos de predição da composição tecidual em caprinos de diferente grupos raciais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigação experimental da tenacidade em tubos de aço API 5L X70 soldados pelo processo HF/ERW

Studies about structural integrity are very important when it desires to prevent disasters associated with flaws inherent in materials used in structural components. The welded joints in steel pipes used to conduction and distribution of oil and gas correspond to the regions most susceptible to flaw. Aiming to contribute to this research line, the present study was designed to assess experimentally the structural integrity of welded joints in steel pipes API 5L X70 used in pipeline systems. This assessment is given from tests of CTOD, whose aim is simulate in laboratory the real behaviour of crack from of his propagation on the welded joint obtained by high frequency electric resistance welding. In this case, the analyses are performed from specimens SE(B) obtained directly of steel pipe API 5L X70. The proposed methodology involves tests of CTOD at lower temperature, in order to assess the toughness of material in critical operation conditions. From performance of CTOD tests, was possible assess the toughness of welded joints in terms of quantity through CTOD parameter and in terms of quality from behaviour of curve load versus CMOD. In this study, also, sought to compare CTOD’s results obtained through rules ASTM E1820 (2008) and BS 7448 (1991). Although the two standards cited previously have adopted different parameters to calculated the value of CTOD, concluded that the values of CTOD tend to converge for a common value

Potencial de uso agrícola de levedura seca inativa de cana-de-açúcar e de resíduos orgânicos

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Suscetibilidade magnética e análise de incertezas em mapeamento de solos

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Cognitive functioning in the schizophrenia prodrome

In the last decade, there has been an increasing interest in cognitive alterations during the early course of schizophrenia. From a clinical perspective, a better understanding of cognitive functioning in putative at-risk states for schizophrenia is essential for developing optimal early intervention models. Two approaches have more recently been combined to assess the entire course of the initial schizophrenia prodrome: the predictive "basic symptom at-risk" (BS) and the ultra high-risk (UHR) criteria. Basic symptoms are considered to be present during the entire disease progression, including the initial prodrome, while the onset of symptoms captured by the UHR criteria expresses further disease progression toward frank psychosis. The present study investigated the cognitive functioning in 93 subjects who met either BS or UHR criteria and thus were assumed to be at different points on the putative trajectory to psychosis. We compared them with 43 patients with a first episode of psychosis and to 49 help-seeking patient controls. All groups performed significantly below normative values. Both at-risk groups performed at intermediate levels between the first-episode (FE) group and normative values. The UHR group demonstrated intermediate performance between the FE and BS groups. Overall, auditory working memory, verbal fluency/processing speed, and declarative verbal memory were impaired the most. Our results suggest that cognitive impairments may still be modest in the early stages of the initial schizophrenia prodrome and thus support current efforts to intervene in the early course of impending schizophrenia because early intervention may prevent or delay the onset of frank psychosis and thus prevent further cognitive damage.

Flavor-phenomenology of two-Higgs-doublet models with generic Yukawa structure

In this article, we perform an extensive study of flavor observables in a two-Higgs-doublet model with generic Yukawa structure (of type III). This model is interesting not only because it is the decoupling limit of the minimal supersymmetric standard model but also because of its rich flavor phenomenology which also allows for sizable effects not only in flavor-changing neutral-current (FCNC) processes but also in tauonic B decays. We examine the possible effects in flavor physics and constrain the model both from tree-level processes and from loop observables. The free parameters of the model are the heavy Higgs mass, tanβ (the ratio of vacuum expectation values) and the “nonholomorphic” Yukawa couplings ϵfij(f=u,d,ℓ). In our analysis we constrain the elements ϵfij in various ways: In a first step we give order of magnitude constraints on ϵfij from ’t Hooft’s naturalness criterion, finding that all ϵfij must be rather small unless the third generation is involved. In a second step, we constrain the Yukawa structure of the type-III two-Higgs-doublet model from tree-level FCNC processes (Bs,d→μ+μ−, KL→μ+μ−, D¯¯¯0→μ+μ−, ΔF=2 processes, τ−→μ−μ+μ−, τ−→e−μ+μ− and μ−→e−e+e−) and observe that all flavor off-diagonal elements of these couplings, except ϵu32,31 and ϵu23,13, must be very small in order to satisfy the current experimental bounds. In a third step, we consider Higgs mediated loop contributions to FCNC processes [b→s(d)γ, Bs,d mixing, K−K¯¯¯ mixing and μ→eγ] finding that also ϵu13 and ϵu23 must be very small, while the bounds on ϵu31 and ϵu32 are especially weak. Furthermore, considering the constraints from electric dipole moments we obtain constrains on some parameters ϵu,ℓij. Taking into account the constraints from FCNC processes we study the size of possible effects in the tauonic B decays (B→τν, B→Dτν and B→D∗τν) as well as in D(s)→τν, D(s)→μν, K(π)→eν, K(π)→μν and τ→K(π)ν which are all sensitive to tree-level charged Higgs exchange. Interestingly, the unconstrained ϵu32,31 are just the elements which directly enter the branching ratios for B→τν, B→Dτν and B→D∗τν. We show that they can explain the deviations from the SM predictions in these processes without fine-tuning. Furthermore, B→τν, B→Dτν and B→D∗τν can even be explained simultaneously. Finally, we give upper limits on the branching ratios of the lepton flavor-violating neutral B meson decays (Bs,d→μe, Bs,d→τe and Bs,d→τμ) and correlate the radiative lepton decays (τ→μγ, τ→eγ and μ→eγ) to the corresponding neutral current lepton decays (τ−→μ−μ+μ−, τ−→e−μ+μ− and μ−→e−e+e−). A detailed Appendix contains all relevant information for the considered processes for general scalar-fermion-fermion couplings.

Requerimiento de lixiviación funcional : concepto, método de determinación y validación biológica

Con la finalidad de mejorar el manejo de suelos regadíos se propone, en reemplazo de los modelos teóricos, un método empírico de laboratorio que pretende ofrecer una visión más realista de los cambios cuanticualitativos de la solución edáfica por la acumulación de agua de riegos sucesivos de reposición. Para cada combinación específica agua-suelo se determina un Requerimiento de Lixiviación Funcional (RLF), definido como la inversa del número de veces, 1/n, que una cuota de riego (CR) -o su equivalente como la cantidad de agua por volumen de suelopodría ser aplicada consecutivamente hasta que fuere necesario lixiviar para limitar en la solución edáfica el nivel de salinidad total, o el de algún ión en particular. El valor de n es determinado experimentalmente por el análisis de los extractos de saturación del suelo, cuyas condiciones iniciales son conocidas, después de evaporar en horno de microondas un número creciente de CR. Este método fue aplicado regionalmente en 40 combinaciones de 5 suelos y 8 aguas de riego y sus RLF fueron comparados con los RL calculados como simple consecuencia de la concentración, sin considerar otros fenómenos posibles durante el proceso. Los resultados muestran que en algunas combinaciones de agua-suelo los RLF pueden diferir significativamente de los teóricos simples, no sólo con respecto a la evolución de la salinidad total (ya prevista en los modelos citados) sino también en la concentración de boro en solución. Una primera prueba de aplicación en cultivo del método propuesto se realizó en un ensayo en macetas, con clones de vid de un año, empleando la misma agua de riego en dos suelos de características funcionales distintas, según la apreciación previa del RLF en laboratorio. Los resultados obtenidos validaron los esperados de acuerdo con el procedimiento indicado. Complementariamente se analizaron las hojas y se calcularon regresiones entre los índices edáficos al final del ensayo y los contenidos foliares de B, Cl y Na, así como estos últimos entre ellos.

The creep properties of a series of zinc-rich zinc-aluminium alloys

The compressive creep behaviour of six sand cast zinc-rich alloys: No3 and No5, corresponding to BS 1004A and BS 1004B, respectively, alloy No2, ILZRO,.16 and two newer alloys ACuZinc5 and ACuZinc10 was investigated. The total creep contraction of the alloys was found to be well correlated using an empirical equation. On the basis of this equation, a parametrical relationship was derived which allowed the total creep contraction to be related to the applied stress, the temperature and the time of test, so that a quantitative assessment of compressive creep of the alloys could be made under different testing conditions. The primary creep and secondary creep rates were found for the alloys at different temperatures and stresses. Generally, the primary creep contraction was found to increase with copper content, whereas secondary creep rates decreased in the order No3, ACuZinc10, ACuZinc5 and No2. ILZRO.16 was tested only at the highest stress and two higher temperatures. The results showed that ILZRO.16 had higher creep resistance than all the other alloys. Thus, based on the above empirical equation, alloy No2 was found to have a substantially better total creep resistance than alloys No3 and No5, and slightly better than ACuZinc5 and ACuZinc10 for strains up to 1%. Both ACuZinc alloys had higher creep strength than commercial alloys No3 and No5. Alloy No5 had much higher creep resistance than alloy No3 under all conditions. The superior creep resistance of alloy No2 was considered to be due to the presence of small precipitates of -phase in the zinc matrix and a regular eutectic morphology. The stress exponents and activation energies for creep under different testing conditions were found to be consistent with some established creep-controlling mechanisms; i.e. dislocation climb for alloy No3, dislocation climb over second phase particles for alloys No5, No2, ACuZinc10, controlled by lattice diffusion in the zinc-rich phase. The lower creep resistance of alloy No3 was mainly due to the lower creep strength of copper-free primary particles having greater volume than eutectic in the microstructure. Alloys No5, ACuZinc5 and ACuZinc10 showed much better creep resistance than alloy No3, based on the precipitation-hardening due to the presence of small -phase precipitates. The primary dendrites in both ACuZinc alloys however were not of much benefit in improving the creep resistance of the alloys.

A temporary connection for an aluminium space frame

This thesis examines theoretically and experimentally the behaviour of a temporary end plate connection for an aluminium space frame structure, subjected to static loading conditions. Theoretical weld failure criterions are derived from basic fundamentals for both tensile and shear fillet welds. Direct account of weld penetration is taken by incorporating it into a more exact poposed weld model. Theoretical relationships between weld penetration and weld failure loads, failure planes and failure lengths are derived. Also, the variation in strength between tensile and shear fillet welds is shown to be dependent upon the extent of weld penetration achieved/ The proposed tensile weld failure theory is extended to predict the theoretical failure of the welds in the end plate space frame connection. A finite element analysis is conducted to verify the assumptions made for this theory. Experimental hardness and tensile tests are conducted to substantiate the extent and severity of the heat affected zone in aluminium alloy 6082-T6. Simple transverse and longitudinal fillet welded specimens of the same alloy, are tested to failure. These results together with those of other authors are compared to the theoretical predictions made by the proposed weld failure theories and by those made using Kamtekar's and Kato and Morita's failure equations, the -formula and BS 8118. Experimental tests are also conducted on the temporary space frame connection. The maximum stresses and displacements recorded are checked against results obtained from a finite element analysis of the connection. Failure predictions made by the proposed extended weld failure theory, are compared against the experimental results.

Functional astrocyte-neuron lactate shuttle in a human stem cell-derived neuronal network

The NT2.D1 cell line is one of the most well-documented embryocarcinoma cell lines, and can be differentiated into neurons and astrocytes. Great focus has also been placed on defining the electrophysiological properties of the neuronal cells, and more recently we have investigated the functional properties of their associated astrocytes. We now show for the first time that human stem cell-derived astrocytes produce glycogen and that co-cultures of these cells demonstrate a functional astrocyte-neuron lactate shuttle (ANLS). The ANLS hypothesis proposes that during neuronal activity, glutamate released into the synaptic cleft is taken up by astrocytes and triggers glucose uptake, which is converted into lactate and released via monocarboxylate transporters for neuronal use. Using mixed cultures of NT2-derived neurons and astrocytes, we have shown that these cells modulate their glucose uptake in response to glutamate. Additionally, we demonstrate that in response to increased neuronal activity and under hypoglycaemic conditions, co-cultures modulate glycogen turnover and increase lactate production. Similar results were also shown after treatment with glutamate, potassium, isoproterenol, and dbcAMP. Together, these results demonstrate for the first time a functional ANLS in a human stem cell-derived co-culture. © 2013 ISCBFM.