The influence of commercial film-forming polymers on reducing salt spray injury in evergreen oak (Quercus ilex L.) and laurel (Prunus laurocerasus L.)

A field trial was undertaken to determine the influence of four commercially available film-forming polymers (Bond [alkyl phenyl hydroxyl polyoxyethylene], Newman Crop Spray 11E™ [paraffinic oil], Nu-Film P [poly-1-p menthene], and Spray Gard [di-1-p menthene]) on reducing salt spray injury on two woody species, evergreen oak (Quercus ilex L.) and laurel (Prunus laurocerasus L.). Irrespective of species, the film-forming polymers Nu-Film-P and Spay Gard did not provide any significant degree of protection against salt spray damage irrespective of concentration (1% or 2%) applied as measured by leaf chlorophyll concentrations, photosynthetic efficiency, visual leaf necrosis, foliar sodium and chloride content, and growth (height, leaf area). The film-forming polymer Newman Crop Spray 11E™ provided only 1-week protection against salt spray injury. The film-forming polymer Bond provided a significant (P < 0.05) degree of protection against salt spray injury 3 months after application as manifest by higher leaf chlorophyll content, photosynthetic efficiency, height and leaf area, and lower visual leaf necrosis and foliar Na and Cl content compared with nontreated controls. In conclusion, results indicate that application of a suitable film-forming polymer can provide a significant degree of protection of up to 3 months against salt spray injury in evergreen oak and laurel. Results also indicate that when applied at 1% or 2% solutions, no problems associated with phytotoxicity and rapid degradation on the leaf surface exist.

Estimativa da área foliar e capacidade de retenção de calda fitossanitária em cafeeiro

This work aimed to study the influence of the coffee tree leave's sizes, cv. Mundo Novo, on the evaluation of the leaf area and its spray retention capacity. Leaf mirroring on paper, leaf digitalization and imagine analyzes (QUANT) and rectangle circumscribed to the leaf methods were compared with LiCor area meter, model 3000. The spray retention capacity was evaluated with and without adjuvant addition at 0.1 and 0.2%. There weren't influence of the leave's size on the leaf area determination's methods. The leaves spray retention capacity was altered in function of the leaf size and of the adjuvant presence or not. The bigger spray retention capacity was observed at 7.7, 13.8 and 32 cm(2) leaves area. The spray without adjuvant exhibited biggest spray retention, with 77.1 mL m(-2). The spray additions of the 0.1 and 0.2% of adjuvant reduced in 64.8 and 67.3%, respectively, the spray retention capacity.

Adubação nitrogenada em cobertura no feijoeiro com suplementação de molibdênio via foliar

The objective of this work was to evaluate the effect of leaf spray of molybdenum (Mo) and nitrogen (N) rates in common bean (Phaseolus vulgaris L.), cultivar Carioca Precoce, evaluating the yield components, yield and leaves nitrate levels. The research was carried out in Botucatu, State of São Paulo, Brazil. The sowing of the beans (06/03/2003) was made with the supply of 230 kg ha(-1) of NPK (4-30-10) granulated fertilizer at planting. The experiment was a complete randomized block, with four replications and a 5 x 2 factorial arrangement, involving five N rates (25; 50; 75 and 125 kg ha(-1)), applied 20 days after emergency (DAE), with or without 80 g ha(-1) of Mo, applied on leaves at 25 DAE. The Mo absence by leaf spray promoted the nitrate accumulation in the leaves in treatments with higher rates of N. The weight of 100 grains increased with the Mo by leaf spray, reducing the need for N to get the best results. The molybdenum fertilization increased bean yield regardless of N rate applied to the beans.

Efeito da aplicação foliar de boro e zinco sobre a produção e os teores de SST e ATT dos frutos da Pereira-Japonesa e da pinheira

Pulverizações foliares com produtos contendo micronutrientes, dentre os quais os produtos quelatizados, são utilizadas com relativa freqüência em frutíferas, sem o embasamento científico adequado, principalmente entre os agricultores mais tecnificados. Neste contexto, o objetivo deste trabalho foi verificar o efeito da aplicação via foliar de B e Zn sobre a produção e os teores de SST e ATT dos frutos da Pereira-Japonesa e da Pinheira. O experimento foi conduzido numa área irrigada, situada no cinturão verde do município de Ilha Solteira-SP. O solo da área foi classificado como Podzólico Vermelho-Escuro. Foram utilizadas plantas de Pereira-Japonesa, cultivar Okussankichi e de Pinheira. Os tratamentos utilizados foram: T1. apenas água; T2. ácido bórico; T3. sulfato de zinco; T4. T2 + T3; T5. ácido bórico + uréia + ácido cítrico + EDTA; T6. sulfato de zinco + uréia + ácido cítrico + EDTA; T7. T5 + T6; T8. ácido bórico + uréia + ácido cítrico + EDTA + molibdato de sódio + enxofre + cloreto de cálcio; T9. sulfato de zinco + ácido cítrico + EDTA + sulfato de Fe + sulfato de Mn + sulfato de Mg, e T10. T8+T9. Foram utilizadas doses de 110 g ha-1 de B e 250 g ha-1 de Zn, em cada aplicação. O delineamento experimental adotado foi o de blocos ao acaso, com quatro repetições e, para comparação de médias, foi utilizado o teste de Tukey. Com base nos resultados obtidos, pode-se concluir que: 1) a produção e os teores de SST e ATT dos frutos da pereira-japonesa e da pinheira não foram influenciados pela aplicação foliar de B e de Zn; b) a mistura de ácido bórico com quelatos foi eficiente no fornecimento de B às plantas de pereira- japonesa, o mesmo não ocorrendo para pinheira, c) o sulfato de zinco + produtos quelatizantes foram eficientes no aumento dos teores foliares de Zn somente na pereira.

Produtividade, qualidade de tubérculos e incidência de doenças em batata, influenciados pela aplicação foliar de silício

O objetivo deste trabalho foi avaliar o efeito da aplicação de silício por via foliar, na forma de ácido silícico estabilizado, sobre a incidência de doenças, produtividade e qualidade de batata. Foram realizados três experimentos: um com a cultivar Agata e outro com a Atlantic, em Botucatu, SP; e um com a cultivar Agata, em Itaí, SP. Utilizou-se delineamento de blocos ao acaso, com oito repetições. Os tratamentos consistiram de: testemunha (sem aplicação de Si) e aplicação de Si via foliar, na dose 2 L ha-1, de produto comercial com 0,8% de Si solúvel como concentrado estabilizado de ácido silícico. A dose de Si foi parcelada em quatro aplicações durante o ciclo da cultura. A aplicação de Si reduz a severidade da requeima e a incidência de canela-preta, além de aumentar a produtividade e o teor de matéria seca dos tubérculos. O fornecimento de Si via foliar aumenta a produtividade de tubérculos, independentemente de seus efeitos sobre a incidência de doenças.

Influência do extrato pirolenhoso na calda de pulverização sobre o teor foliar de nutrientes em limoeiro 'Cravo'

Com o objetivo de avaliar o efeito da presença do extrato pirolenhoso (EP) na calda de pulverização sobre o teor foliar de nutrientes de limoeiro 'Cravo' (Citrus limonia Osbeck), foi desenvolvido um experimento com seis tratamentos e quatro repetições, em blocos ao acaso, em ambiente protegido. Os tratamentos constituíram da pulverização das soluções: T0 = água; T1 = solução de micronutrientes sem EP; T2 = solução de micronutrientes + EP (1cm³ dm-3); T3 = solução de micronutrientes + EP (2 cm³ dm-3); T4 = solução de micronutrientes + EP (5cm³ dm-3); T5 = solução de micronutrientes + EP (10 cm³ dm-3). A solução de micronutrientes foi preparada com sulfatos de Cu, Fe, Mn, Zn (250 mg dm-3 do elemento) e ácido bórico (42,5 mg dm-3 de B). As plantas foram cultivadas em tubetes cônicos de 0,280 dm³, com substrato sem a adição de micronutrientes na formulação. As soluções foram pulverizadas uma única vez, aos 140 dias após o plantio (DAP), momento em que as plantas apresentavam aproximadamente 20 cm de altura. Ao final do experimento (160 DAP), quantificaram-se a massa seca e os teores de macro e micronutrientes da parte aérea e sistema radicular. A presença do extrato pirolenhoso na solução de micronutrientes não interferiu na concentração foliar de B, Fe e Zn em mudas de limoeiro 'Cravo'. Entretanto, na concentração de 10 cm³ dm-3, aumentou a concentração foliar de Cu e Mn. Observou-se também que as plantas pulverizadas com soluções contendo EP (1 a 10 cm³ dm-3) + micronutrientes apresentaram menor teor de Fe e maior teor de Ca no sistema radicular.

Droplet deposition during spray and leaf pH in aquatic weed control

A diversidade morfológica da superfície foliar existente entre as espécies de plantas e a presença de estruturas foliares como tricomas, estômatos, cutícula e ceras podem exercer grande influência na aderência e deposição das gotas de pulverização, assim como na absorção do herbicida. Desta forma, o objetivo do presente trabalho foi estudar, em quatro espécies de plantas daninhas aquáticas (Enhydra anagallis, Eichhornia crassipes, Heteranthera reniformis e Typha subulata), a área de molhamento de gotas de pulverização nas superfícies foliares adaxial e abaxial, bem como o pH foliar. O experimento foi realizado em Botucatu-SP. As plantas foram cultivadas em caixas d'água sob condições de campo, e quando atingiram seu pleno desenvolvimento (antes do florescimento), foram realizadas as avaliações de pH foliar e da área de molhamento de gotas de pulverização. As tensões superficiais das gotas aplicadas (0,5 mL), apresentadas pelas soluções de glyphosate aplicado isolado a 5,0% v v-1 (Rodeo 480 g L-1 e.a. produto comercial), glyphosate + Aterbane BR (5,0% + 0,5% v v-1), glyphosate + Silwet L-77 (5,0% + 0,05% v v-1), além das soluções com os adjuvantes isolados, Aterbane BR (0,5% v v-1) e Silwet L-77 (0,05% v v-1) foram respectivamente 72,1; 28,7; 23,3; 37,3 e 22,1 mN m-1. As médias obtidas de pH foliar variaram entre 5,50 e 7,50, destacando-se a espécie E. anagallis com valores de 6,68 e 7,02 para as faces adaxial e abaxial, respectivamente. Dentre as plantas daninhas aquáticas avaliadas T. subulata foi a espécie que apresentou as maiores médias de área de molhamento nas faces adaxial e abaxial da folha, proporcionada pelas as soluções de glyphosate + Aterbane BR, glyphosate + Silwet L-77 e Silwet L-77, com valores de 12,99-7,03; 20,04-17,95 e 31,81-25,91 mm², respectivamente.

Mancha-foliar-de-Phyllosticta em gengibre. caracterização cultural do patógeno e efeito de tratamentos químicos no controle da doença em Morretes, Estado do Paraná

The objectives of this work were to determine the micelial growth curve of the pathogen and the sensitivity to some fungicides potencially efficient to disease control. The optimum temperature range for micelial growth of Phyllosticta sp, was between 25 and 27.5 degrees C. The maximum and minimum temperatures for micelial growth were 32.5 degrees C and 10 degrees C. Temperatures of 5 and 35 degrees C completely inhibited the growth of the isolates. Total inhibition of the micelial growth was observed with captan and mancozeb (1000 mg a.i./ml) and triadimenol (100 mg a.i./ml). Partial reduction of the micelial growth was observed with iprodione, methyl tiofanate and chlorothalonil until 1.000 mg/ml. The chemical control of PLS was studied in a commercial area of ginger ''Gigante'', in Morretes, PR, where 18 sprays were carried out, with a break of 7 to 10 days, from December to April. The highest reduction of the area under the disease progress curve standardized (AUDPCs) was observed with the spray of chlorothalonil. With the application of dithianon, cupper oxychloride, folpet, mancozeb and captan it was observed AUDPCs between 15.05 and 18.61 lesions/leaf. Iprodione, benomyl, triadimenol and methyl tiofanate did not control the disease (AUDPCs between 20.03 and 25.04 lesions/leaf). The AUDPCs in the check plot was 35.88 lesions/leaf. There was no significant difference of vigor and of ginger yield between fungicide treatments. The cupper oxichloride was phytotoxic to ginger.

Estimativa da área e capacidade de retenção foliar de calda em citros

This work was done to determine the maximum amount of liquid that the citrus leaves can hold back and compare alternative methods for estimating leaf area with the standard method of integrating electronic image. The alternative methods were leaf mirroring on paper and leaf digitalization and imagine analyzes. The spray retention capacity was evaluated with mitecide sprayed with cyhexatin (Sipcatin 500 CS) plus the treatments: combination of two adjuvants (mineral oil - Assist and vegetable oil - Veget'Oil) and two concentrations (10 and 15 mL of adjuvant L-1). The methods for estimating leaf area assessed do not differ between them. The maximum retention of liquids for the leaf occurred when vegetable oil in the application was used.

Adubação foliar e axilar na produtividade e qualidade de abacaxi

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Chloroacetamid Spray Drift and Leaf Tatters in Hackberry

During the last decade, leaf tatters has been reported in white oak and hackberry across several Midwestern states. Herbicide spray drift studies have shown that chloroacetamides can induce leaf tatters. The objectives of this research were to: 1) identify vulnerable bud developmental stages in hackberry and 2) determine if different commercial chloroacetamides affect severity of leaf tatters. In 2008, a preliminary spray drift experiment was conducted on mature trees from a former hackberry provenance test stand. Acetochlor (Harness), S-metolachlor (Dual II Magnum), and dimethenamid (Outlook) were applied at concentrations approximating 27%, 54%, 81%, or 108% of the recommended field rate. Three developmental stages before bud burst were present on the selected trees. Leaf tatters did not develop on the selected hackberry trees. However, symptoms were observed on neighboring, non-target hackberry trees, which had been in the leaf unfolding and expanding stages at the time of spraying. In 2009, three year old hackberry seedlings were treated with 1%, 10%, and 100% of the recommended field rate of acetochlor (Harness), S-metolachlor (Dual II Magnum), and dimethenamid (Outlook). Folded buds and two unfolding leaf developmental stages were present on seedlings. Another spray study was conducted on 32 mature hackberry trees from the provenance stand. A solution of 5608 mg a.i./L dimethenamid (Outlook) was applied to trees in the unfolding and/or expanding leaf stage. Treated trees represented four provenances. Image analysis was used to calculate seedling and mature tree leaf areas and estimate the seedling percentage of leaf tissue loss. Foliar damage was not significantly different between seedlings treated with water, 1%, or 10% of the field rate. Foliar damage was significantly different between seedlings treated with 1% or 100% of the field rate, and between seedlings treated with 10% or 100% of the field rate. Foliar damage in seedlings was not significantly different between the developmental stages. Additionally, symptoms of leaf tatters were observed on the treated mature hackberry. Future studies should focus on chloroacetamide concentrations above 10% of the recommended field rate.

Foliar phosphorus application enhances nutrient balance and growth of phosphorus deficient sugarcane

Although it is well known that nutrient imbalance in shoot tissues may impair plant performance, the interactive effect between foliar phosphorus (P) application and varying P availability in the rooting medium on the nutritional status of sugarcane has not been well studied. To fill this research gap, four sugarcane varieties (IAC91-1099, IACSP94-2101, IACSP94-2094 and IACSP95-5000) were evaluated using a combination of two concentrations of P in nutrient solution (P-deficient, PD = 0.02 mmol L^(−1) and P-sufficient, PS = 0.5 mmol L^(−1)) and foliar P application (none and 0.16 mol L^(−1)). The spray was applied until drip point three times during the experiment with 15 days intervals, after which the plants were harvested to quantify growth and shoot concentration of nitrogen (N), P, magnesium (Mg), sulphur (S) and manganese (Mn). The responses of sugarcane plants to foliar P spray at different levels of P supply in the rooting medium was not genotype-dependent. It was demonstrated for the averaged values across varieties, that foliar P application enhanced sugarcane performance under low P, as revealed by improvements of leaf area and dry matter production of shoot and root of PD plants. Under P limitation we also observed diminished shoot concentration of N, P, Mg, S and increased concentration of Mn. However, foliar P spray increased the concentrations of N, P, S and reduced shoot Mn. Furthermore, shoot P:N, P:Mg, P:S, P:Mn and Mg:Mn concentration ratios exhibited a positive relationship with shoot dry matter production. In conclusion, low P supply in the rooting medium impairs nutrient balance in shoot tissues of sugarcane at early growth; however, this effect was ameliorated by foliar P application which merits further study under field conditions.

On The Distinct Molecular Architectures Of Dipping- And Spray-lbl Films Containing Lipid Vesicles.

The introduction of spraying procedures to fabricate layer-by-layer (LbL) films has brought new possibilities for the control of molecular architectures and for making the LbL technique compliant with industrial processes. In this study we show that significantly distinct architectures are produced for dipping and spray-LbL films of the same components, which included DODAB/DPPG vesicles. The films differed notably in their thickness and stratified nature. The electrical response of the two types of films to aqueous solutions containing erythrosin was also different. With multidimensional projections we showed that the impedance for the DODAB/DPPG spray-LbL film is more sensitive to changes in concentration, being therefore more promising as sensing units. Furthermore, with surface-enhanced Raman scattering (SERS) we could ascribe the high sensitivity of the LbL films to adsorption of erythrosin.

Effect Of Spray Drying On The Sensory And Physical Properties Of Hydrolysed Casein Using Gum Arabic As The Carrier.

This study was aimed at spray drying hydrolysed casein using gum Arabic as the carrier agent, in order to decrease the bitter taste. Three formulations with differing proportions of hydrolysed casein: gum Arabic (10:90, 20:80 and 30:70) were prepared and characterized. They were evaluated for their moisture content, water activity, hygroscopicity, dispersibility in water and in oil, particle size and distribution, particle morphology, thermal behaviour (DSC) and bitter taste by a trained sensory panel using a paired-comparison test (free samples vs. spray dried samples). The proportion of hydrolysed casein did not affect the morphology of the microspheres. The spray drying process increased product stability and modified the dissolution time, but had no effect on the ability of the material to dissolve in either water or oil. The sensory tests showed that the spray drying process using gum Arabic as the carrier was efficient in attenuating or masking the bitter taste of the hydrolysed casein.

Direct And Non-destructive Proof Of Authenticity For The 2nd Generation Of Brazilian Real Banknotes Via Easy Ambient Sonic Spray Ionization Mass Spectrometry.

Using a desorption/ionization technique, easy ambient sonic-spray ionization coupled to mass spectrometry (EASI-MS), documents related to the 2nd generation of Brazilian Real currency (R$) were screened in the positive ion mode for authenticity based on chemical profiles obtained directly from the banknote surface. Characteristic profiles were observed for authentic, seized suspect counterfeit and counterfeited homemade banknotes from inkjet and laserjet printers. The chemicals in the authentic banknotes' surface were detected via a few minor sets of ions, namely from the plasticizers bis(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), most likely related to the official offset printing process, and other common quaternary ammonium cations, presenting a similar chemical profile to 1st-generation R$. The seized suspect counterfeit banknotes, however, displayed abundant diagnostic ions in the m/z 400-800 range due to the presence of oligomers. High-accuracy FT-ICR MS analysis enabled molecular formula assignment for each ion. The ions were separated by 44 m/z, which enabled their characterization as Surfynol® 4XX (S4XX, XX=40, 65, and 85), wherein increasing XX values indicate increasing amounts of ethoxylation on a backbone of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (Surfynol® 104). Sodiated triethylene glycol monobutyl ether (TBG) of m/z 229 (C10H22O4Na) was also identified in the seized counterfeit banknotes via EASI(+) FT-ICR MS. Surfynol® and TBG are constituents of inks used for inkjet printing.