The genetic basis of resistance to anticoagulants in rodents

Anticoagulant compounds, i.e., derivatives of either 4-hydroxycoumarin (e.g., warfarin, bromadiolone) or indane-1,3-dione (e.g., diphacinone, chlorophacinone), have been in worldwide use as rodenticides for > 50 years. These compounds inhibit blood coagulation by repression of the vitamin K reductase reaction (VKOR). Anticoagulant-resistant rodent populations have been reported from many countries and pose a considerable problem for pest control. Resistance is transmitted as an autosomal dominant trait although, until recently, the basic genetic mutation was unknown. Here, we report on the identification of eight different mutations in the VKORC1 gene in resistant laboratory strains of brown rats and house mice and in wild-caught brown rats from various locations in Europe with five of these mutations affecting only two amino acids (Tyr139Cys, Tyr139Ser, Tyr139Phe and Leu128Gln, Leu128Ser). By recombinant expression of VKORC1 constructs in HEK293 cells we demonstrate that mutations at Tyr139 confer resistance to warlarin at variable degrees while the other mutations, in addition, dramatically reduce VKOR activity. Our data strongly argue for at least seven independent mutation events in brown rats and two in mice. They suggest that mutations in VKORC1 are the genetic basis of anticoagulant resistance in wild populations of rodents, although the mutations alone do not explain all aspects of resistance that have been reported. We hypothesize that these mutations, apart from generating structural changes in the VKORC1 protein, may induce compensatory mechanisms to maintain blood clotting. Our findings provide the basis for a DNA-based field monitoring of anticoagulant resistance in rodents.

Mirror lightpipes: daylighting performance in real buildings

Mirror lightpipes are useful for providing healthy and energy-efficient daylight into buildings where windows and skylights are unsuitable, insufficient or generate too much heat gain. The lightpipes have been installed in dozens of buildings in the UK. Field monitoring has been carried out to assess their performance in four different buildings: the headquaters of a major insurance company, a health clinic, a residential building and a college dining hall In those cases where lighipipes with moderate aspect ratios were installed, good illuminance of up to 450 lux has been obtained with internal/external illuminance ratios around 1%. When long and narrow lightpipes with many bends are used, however, the ratio reduced to around 0.1%. These results showed that lightpipes can be effective daylighting devices provided that excessive aspect ratios and numbers of bends are avoided. Lightpipes with larger diameters should be used whenever possible. The lightpipes often improved signiScantly the visual quality af the interior environment, and high user satisfaction was found even in buildings where a relatively low level of daylight was admitted through the lightpipes

Integração de características de planta, de dossel e de solo para maior eficiência da adubação nitrogenada em cobertura em milho

O milho é um das culturas mais exigentes em nitrogênio (N). A sua aplicação na dose e época correta pode aumentar a sua eficiência de uso, diminuindo custos e danos ambientais. Foram estudadas características de planta, de dossel e de solo, como indicadores da disponibilidade de N no sistema solo-planta para predição da necessidade deste nutriente em cobertura em milho. Foram conduzidos cinco experimentos a campo e dois em casa de vegetação, nas estações de crescimento de 2002/03 e 2003/04, na Estação Experimental Agronômica e na Faculdade de Agronomia da UFRGS, em Eldorado do Sul e em Porto Alegre-RS, Brasil, respectivamente, e dois experimentos a campo no ano de 2004 no Estern Cereal and Oilseed Research Center, em Ottawa-Ontário, Canadá. Foram avaliadas, em diferentes locais e situações de manejo, características de planta, de dossel e de solo, citando-se: teores de nitrato, amônio e N mineral no solo e na folha; massa seca e área foliar da folha e da planta, teor e acúmulo de N na folha e na planta; teor relativo de clorofila na folha, medido pelo clorofilômetro, reflectância do dossel, medido por dois tipos de radiômetros e fluorescência da folha, medida pelo fluorômetro. Além disso, foram avaliados o rendimento de grãos e seus componentes e parâmetros de eficiência técnica e econômica de uso de N. Dentre as características de planta, o teor relativo de clorofila na folha, e dentre os de solo, o teor de nitrato no solo, destacaram-se entre os demais avaliados. Foram determinados níveis críticos e doses ótimas de N, bem como estabelecidas curvas de calibração para dois níveis de manejo com base nestas características para monitoramento da lavoura. No que diz respeito às características de dossel estudadas, a reflectância apresentou melhores resultados que a fluorescência como indicador do nível de N no sistema solo-planta. Os estudos realizados mostraram que dentre as caracteríticas avaliadas, atualmente, o teor relativo de clorofila na folha tem o maior potencial para auxiliar na determinação da época mais adequada para aplicação de N em cobertura em milho.

Caracterização química e toxicológica da água produzida descartada em plataformas de óleo e gás na costa brasileira e seu comportamento dispersivo no mar

The production of oil and gas is usually accompanied by the production of water, also known as produced water. Studies were conducted in platforms that discharge produced water in the Atlantic Ocean due to oil and gas production by Petrobras from 1996 to 2006 in the following basins: Santos (Brazilian south region), Campos (Brazilian southeast region) and Ceara (Brazilian northeast region). This study encompasses chemical composition, toxicological effects, discharge volumes, and produced water behavior after releasing in the ocean, including dispersion plumes modeling and monitoring data of the marine environment. The concentration medians for a sampling of 50 samples were: ammonia (70 mg L-1), boron (1.3 mg L1), iron (7.4 mg L-1), BTEX (4.6 mg L-1), PAH (0.53 mg L-1), TPH (28 mg L-1); phenols (1.3 mg L-1) and radioisotopes (0.15 Bq L-1 for 226Ra and 0.09 Bq L-1 for 228Ra). The concentrations of the organic and inorganic parameters observed for the Brazilian platforms were similar to the international reference data for the produced water in the North Sea and in other regions of the world. It was found significant differences in concentrations of the following parameters: BTEX (p<0.0001), phenols (p=0.0212), boron (p<0.0001), iron (p<0.0001) and toxicological response in sea urchin Lytechinus variegatus (p<0.0001) when considering two distinguished groups, platforms from southeast and northeast Region (PCR-1). Significant differences were not observed among the other parameters. In platforms with large gas production, the monoaromatic concentrations (BTEX from 15.8 to 21.6 mg L-1) and phenols (from 2 to 83 mg L-1) were higher than in oil plataforms (median concentrations of BTEX were 4.6 mg L-1 for n=53, and of phenols were 1.3 mg L-1 for n=46). It was also conducted a study about the influence of dispersion plumes of produced water in the vicinity of six platforms of oil and gas production (P-26, PPG-1, PCR-1, P-32, SS-06), and in a hypothetical critical scenario using the chemical characteristics of each effluent. Through this study, using CORMIX and CHEMMAP models for dispersion plumes simulation of the produced water discharges, it was possible to obtain the dilution dimension in the ocean after those discharges. The dispersion plumes of the produced water modelling in field vicinity showed dilutions of 700 to 900 times for the first 30-40 meters from the platform PCR-1 discharge point; 100 times for the platform P-32, with 30 meters of distance; 150 times for the platform P-26, with 40 meters of distance; 100 times for the platform PPG-1, with 130 meters of distance; 280 to 350 times for the platform SS-06, with 130 meters of distance, 100 times for the hypothetical critical scenario, with the 130 meters of distance. The dilutions continue in the far field, and with the results of the simulations, it was possible to verify that all the parameters presented concentrations bellow the maximum values established by Brazilian legislation for seawater (CONAMA 357/05 - Class 1), before the 500 meters distance of the discharge point. These results were in agreement with the field measurements. Although, in general results for the Brazilian produced water presented toxicological effects for marine organisms, it was verified that dilutions of 100 times were sufficient for not causing toxicological responses. Field monitoring data of the seawater around the Pargo, Pampo and PCR-1 platforms did not demonstrate toxicity in the seawater close to these platforms. The results of environmental monitoring in seawater and sediments proved that alterations were not detected for environmental quality in areas under direct influence of the oil production activities in the Campos and Ceara Basin, as according to results obtained in the dispersion plume modelling for the produced water discharge

Caracterização química e toxicológica da água produzida descartada em plataformas de óleo e gás na costa brasileira e seu comportamento dispersivo no mar

The production of oil and gas is usually accompanied by the production of water, also known as produced water. Studies were conducted in platforms that discharge produced water in the Atlantic Ocean due to oil and gas production by Petrobras from 1996 to 2006 in the following basins: Santos (Brazilian south region), Campos (Brazilian southeast region) and Ceara (Brazilian northeast region). This study encompasses chemical composition, toxicological effects, discharge volumes, and produced water behavior after releasing in the ocean, including dispersion plumes modeling and monitoring data of the marine environment. The concentration medians for a sampling of 50 samples were: ammonia (70 mg L-1), boron (1.3 mg L1), iron (7.4 mg L-1), BTEX (4.6 mg L-1), PAH (0.53 mg L-1), TPH (28 mg L-1); phenols (1.3 mg L-1) and radioisotopes (0.15 Bq L-1 for 226Ra and 0.09 Bq L-1 for 228Ra). The concentrations of the organic and inorganic parameters observed for the Brazilian platforms were similar to the international reference data for the produced water in the North Sea and in other regions of the world. It was found significant differences in concentrations of the following parameters: BTEX (p<0.0001), phenols (p=0.0212), boron (p<0.0001), iron (p<0.0001) and toxicological response in sea urchin Lytechinus variegatus (p<0.0001) when considering two distinguished groups, platforms from southeast and northeast Region (PCR-1). Significant differences were not observed among the other parameters. In platforms with large gas production, the monoaromatic concentrations (BTEX from 15.8 to 21.6 mg L-1) and phenols (from 2 to 83 mg L-1) were higher than in oil plataforms (median concentrations of BTEX were 4.6 mg L-1 for n=53, and of phenols were 1.3 mg L-1 for n=46). It was also conducted a study about the influence of dispersion plumes of produced water in the vicinity of six platforms of oil and gas production (P-26, PPG-1, PCR-1, P-32, SS-06), and in a hypothetical critical scenario using the chemical characteristics of each effluent. Through this study, using CORMIX and CHEMMAP models for dispersion plumes simulation of the produced water discharges, it was possible to obtain the dilution dimension in the ocean after those discharges. The dispersion plumes of the produced water modelling in field vicinity showed dilutions of 700 to 900 times for the first 30-40 meters from the platform PCR-1 discharge point; 100 times for the platform P-32, with 30 meters of distance; 150 times for the platform P-26, with 40 meters of distance; 100 times for the platform PPG-1, with 130 meters of distance; 280 to 350 times for the platform SS-06, with 130 meters of distance, 100 times for the hypothetical critical scenario, with the 130 meters of distance. The dilutions continue in the far field, and with the results of the simulations, it was possible to verify that all the parameters presented concentrations bellow the maximum values established by Brazilian legislation for seawater (CONAMA 357/05 - Class 1), before the 500 meters distance of the discharge point. These results were in agreement with the field measurements. Although, in general results for the Brazilian produced water presented toxicological effects for marine organisms, it was verified that dilutions of 100 times were sufficient for not causing toxicological responses. Field monitoring data of the seawater around the Pargo, Pampo and PCR-1 platforms did not demonstrate toxicity in the seawater close to these platforms. The results of environmental monitoring in seawater and sediments proved that alterations were not detected for environmental quality in areas under direct influence of the oil production activities in the Campos and Ceara Basin, as according to results obtained in the dispersion plume modelling for the produced water discharge

Distribuição espacial e plano amostragem seqüencial para a lagarta do minador-dos-citros Phyllocnistis citrella Stainton, 1856 (Lepidoptera: Gracillariidae), em laranjeira 'Pêra-Rio' Citrus sinensis (L.) Osbeck

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Efeitos do processamento artesanal de raízes de mandioca (Manihot esculenta Crantz) e plantas de malva (Urena lobata L.) sobre a hidrobiogeoquímica de microbacias do Nordeste do Pará

No nordeste do Estado do Pará predomina a agricultura familiar, a qual tem como principais produtos a mandioca e a malva. No processamento desses produtos, os agricultores costumam submergir fardos de mandioca e de malva em águas de igarapés, com a finalidade de amolecer a casca e remover as substâncias tóxicas, no caso da mandioca, ou proporcionar o desfibramento, no caso da malva. Os efeitos dessa prática sobre a qualidade da água fluvial são pouco conhecidos. Nesse contexto, a presente pesquisa objetivou avaliar os possíveis impactos dessas práticas sobre a hidrobiogeoquímica fluvial em igarapés dessa região. Adotou-se como estratégia coletar amostras de águas fluviais a montante do ponto de lavagem dos produtos, no local de lavagem e a jusante deste local. A fim de conhecer, com maior clareza, as possíveis alterações na química das águas, provocadas pelas lavagens de mandioca e de malva, somou-se à estratégia de campo a realização de experimentos em tanque com vazões de entrada e saída controladas. Em ambas abordagens foram monitoradas as seguintes variáveis hidrobiogeoquímicas no material dissolvido: pH, condutividade elétrica, oxigênio dissolvido, cálcio, magnésio, potássio, sódio, cloreto, sulfato, fosfato, nitrato, amônio, além de nitrogênio total e carbono orgânico e inorgânico dissolvidos. Os resultados obtidos evidenciaram que o processo de lavagem de raízes de mandioca e de plantas de malva contribuiu para alterar a hidrobiogeoquímica fluvial de pequenos igarapés apenas pontualmente. Porém, algumas das alterações observadas localmente permaneceram por até dez metros a jusante do local de lavagem dos produtos. Nos experimentos em tanque, as alterações foram mais evidentes e uma análise de cluster confirmou a hipótese de que o processamento dos produtos agrícolas enfocados colaborou para alterar a hidrobiogeoquímica fluvial nos igarapés monitorados. O estudo recomenda algumas precauções no tocante às práticas de processamento dos produtos em foco e também a adoção de alguns parâmetros para o monitoramento desses impactos.

Modelos Matemáticos e Computacionais no Manejo Integrado de Pragas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapping surface deformation in open pit iron mines of Carajas Province (Amazon Region) using an integrated SAR analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tetti verdi: Analisi sperimentale e Modellazione numerica

I tetti verdi rappresentano, sempre più frequentemente, una tecnologia idonea alla mitigazione alle problematiche connesse all’ urbanizzazione, tuttavia la conoscenza delle prestazioni dei GR estensivi in clima sub-Mediterraneo è ancora limitata. La presente ricerca è supportata da 15 mesi di analisi sperimentali su due GR situati presso la Scuola di Ingegneria di Bologna. Inizialmente vengono comparate, tra loro e rispetto a una superficie di riferimento (RR), le prestazioni idrologiche ed energetiche dei due GR, caratterizzati da vegetazione a Sedum (SR) e a erbe native perenni (NR). Entrambi riducono i volumi defluiti e le temperature superficiali. Il NR si dimostra migliore del SR sia in campo idrologico che termico, la fisiologia della vegetazione del NR determina l'apertura diurna degli stomi e conseguentemente una maggiore evapotraspirazione (ET). Successivamente si sono studiate la variazioni giornaliere di umidità nel substrato del SR riscontrando che la loro ampiezza è influenzata dalla temperatura, dall’umidità iniziale e dalla fase vegetativa. Queste sono state simulate mediante un modello idrologico basato sull'equazione di bilancio idrico e su due modelli convenzionali per la stima della ET potenziale combinati con una funzione di estrazione dell’ umidità dal suolo. Sono stati proposti dei coefficienti di correzione, ottenuti per calibrazione, per considerare le differenze tra la coltura di riferimento e le colture nei GR durante le fasi di crescita. Infine, con l’ausilio di un modello implementato in SWMM 5.1. 007 utilizzando il modulo Low Impact Development (LID) durante simulazioni in continuo (12 mesi) si sono valutate le prestazioni in termini di ritenzione dei plot SR e RR. Il modello, calibrato e validato, mostra di essere in grado di riprodurre in modo soddisfacente i volumi defluiti dai due plot. Il modello, a seguito di una dettagliata calibrazione, potrebbe supportare Ingegneri e Amministrazioni nella valutazioni dei vantaggi derivanti dall'utilizzo dei GR.

Characterization of fecal contamination targeting 16S rRNA bacteroides molecular markers in the Santa Cruz River, Arizona

Understanding the origins, transport and fate of contamination is essential to effective management of water resources and public health. Individuals and organizations with management responsibilities need to understand the risks to ecosystems and to humans from contact with contamination. Managers also need to understand how key contaminants vary over time and space in order to design and prioritize mitigation strategies. Tumacacori National Historic Park (NHP) is responsible for management of its water resources for the benefit of the park and for the health of its visitors. The existence of microbial contaminants in the park poses risks that must be considered in park planning and operations. The water quality laboratory at the Maricopa Agricultural Center (in collaboration with stakeholder groups and individuals located in the ADEQ-targeted watersheds) identified biological changes in surface water quality in impaired reaches rivers to determine the sources of Escherichia coli (E. coli); bacteria utilizing innovative water quality microbial/bacterial source tracking methods. The end goal was to support targeted watershed groups and ADEQ towards E. coli reductions. In the field monitoring was conducted by the selected targeted watershed groups in conjunction with The University of Arizona Maricopa Agricultural Center Water Quality Laboratory. This consisted of collecting samples for Bacteroides testing from multiple locations on select impaired reaches, to determine contamination resulting from cattle, human recreation, and other contributions. Such testing was performed in conjunction with high flow and base flow conditions in order to accurately portray water quality conditions and variations. Microbial monitoring was conducted by The University of Arizona Water Quality Laboratory at the Maricopa Agricultural Center using genetic typing to differentiate among two categories of Bacteroides: human and all (total). Testing used microbial detection methodologies and molecular source tracking techniques.^

Resistance to malathion and lambda-cyhalothrin in Ceratitis capitata (Wiedemann) (Diptera: Tephritidae)

La mosca mediterránea de la fruta, Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), es una de las plagas de mayor incidencia económica en cítricos y otros frutales a nivel mundial. En España las medidas de control de esta plaga en cítricos, desde mediados de los 90 hasta 2009, se basaron principalmente en el monitoreo de las poblaciones y en la aplicación de tratamientos aéreos y terrestres con malatión cebo. Sin embargo, desde la retirada en la Unión Europea en 2009 de los productos fitosanitarios que contienen malatión, los insecticidas más utilizados para el control de esta plaga han sido lambda-cihalotrina y spinosad. En 2004-2005 se detectaron poblaciones españolas de C. capitata resistentes a malatión. Esta resistencia se ha asociado a una mutación (G328A) en la acetilcolinesterasa (AChE), a una duplicación del gen de la AChE (Ccace2) (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas (posiblemente aliesterasas). Sin embargo, cuando se secuenció la aliesterasa CcE7 en individuos de una línea resistente a malatión, no se encontró ninguna de las mutaciones (G137D y/o W251L/S/G) asociadas a resistencia en otras especies, si bien se encontraron otras mutaciones al compararlos con individuos de una línea susceptible. Asimismo, mediante la selección en laboratorio de una línea resistente a malatión (W-4Km) con lambda-cihalotrina, se ha podido obtener una línea resistente a lambda-cihalotrina (W-1K). Finalmente, se ha demostrado la capacidad de esta especie para desarrollar resistencia a spinosad mediante selección en laboratorio. Los múltiples mecanismos de resistencia identificados evidencian el potencial de esta especie para desarrollar resistencia a insecticidas con diferentes modos de acción. Los objetivos de esta tesis doctoral son: 1) evaluar la susceptibilidad de poblaciones españolas de campo de C. capitata a lambda-cihalotrina y dilucidar los mecanismos de resistencia en la línea W-1Kλ; 2) comparar la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A); y 3) investigar el papel de las mutaciones identificadas en la aliesterasa CcαE7 en la resistencia a malatión. Estos estudios son de utilidad para el desarrollo de estrategias de manejo de la resistencia que puedan prevenir o retrasar la aparición de resistencia y aumentar la sostenibilidad de los insecticidas disponibles para el control de esta plaga. Nuestros resultados indican que las poblaciones españolas de C. capitata analizadas han desarrollado resistencia a lambda-cihalotrina. Los valores de CL50 estimados para las poblaciones recogidas en la Comunidad Valenciana, Cataluña y Andalucía oscilaron entre 129 ppm y 287 ppm, igualando o sobrepasando la concentración recomendada para los tratamientos de campo (125 ppm). Estos resultados contrastan con los obtenidos con tres poblaciones de campo recogidas en Túnez, cuya susceptibilidad fue similar a la de la línea control (C). La línea resistente a lambda-cihalotrina W-1K se continuó seleccionando en el laboratorio alcanzándose unos niveles de resistencia de 205 veces con respecto a la línea C, siendo su CL50 (4224 ppm) más de 30 veces superior a la concentración recomendada para los tratamientos de campo. Esta línea resistente mostró altos niveles de resistencia cruzada a deltametrina (150 veces) y a etofenprox (240 veces), lo que sugiere que el desarrollo de resistencia a lambda-cihalotrina podría comprometer la eficacia de otros piretroides para el control de esta plaga. Hemos demostrado que la resistencia de la línea W-1K a lambda-cihalotrina fue casi completamente suprimida por el sinergista PBO, lo que indica que las enzimas P450 desempeñan un papel muy importante en la resistencia a este insecticida. Sin embargo, tanto las moscas de la línea susceptible C como las de la línea resistente W-1K perdieron inmediatamente la capacidad de caminar (efecto “knock-down”) al ser tratadas tópicamente con lambda-cihalotrina, lo que sugiere que la resistencia no está mediada por alteraciones en la molécula diana (resistencia tipo “kdr”). La resistencia metabólica mediada por P450 fue analizada comparando la expresión de 53 genes CYP (codifican enzimas P450) de las familias CYP4, CYP6, CYP9 y CYP12 en adultos de la línea resistente W-1K y de la línea susceptible C. Nuestros resultados muestran que el gen CYP6A51 (número de acceso GenBank XM_004534804) fue sobreexpresado (13-18 veces) en la línea W-1K. Por otra parte, la expresión del gen CYP6A51 fue inducida tanto en adultos de la línea W-1K como de la línea C al ser tratados con lambda-cihalotrina. Sin embargo, no se obtuvieron diferencias significativas entre la línea susceptible C y la línea resistente W-1K al comparar la cantidad de P450 y la actividad NADPH-citocromo c reductasa presente en fracciones microsomales obtenidas a partir de abdómenes. Asimismo, no hemos podido correlacionar el metabolismo de deltametrina, estimado in vitro mediante la incubación de este insecticida con fracciones microsomales, con el nivel de resistencia a este piretroide observado en los bioensayos con la línea W-1K. Por otro lado, no se encontró ninguna alteración en la región promotora 5'UTR del gen CYP6A51 (-500 pb desde el inicio de la traducción) que pudiera explicar su sobreexpresión en la línea W-1K. Los datos obtenidos sugieren que la resistencia a lambda-cihalotrina en la línea W-1K está mediada por P450 y que la sobreexpresión de CYP6A51 puede desempeñar un papel importante, aunque se necesitan más evidencias para establecer una asociación directa de la resistencia con este gen. Hemos estudiado la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A). La línea susceptible C, donde no se encuentra la mutación G328A (genotipo S/S), se cruzó con dos isolíneas establecidas para representar genotipos únicos correspondientes a los dos mecanismos de resistencia asociados a la molécula diana: 1) la isolínea 267Y (genotipo R/R) establecida a partir de una pareja que portaba la mutación G328A en homocigosis; 2) la isolínea 306TY (genotipo RS/RS) establecida a partir de una pareja que portaba en homocigosis la duplicación del gen Ccace2. No se realizaron cruces recíprocos, ya que mediante experimentos de hibridación in situ en cromosomas politénicos se pudo comprobar que el locus de la AChE y la duplicación (probablemente en tándem) se localizan en el cromosoma autosómico 2L. La susceptibilidad al malatión de los parentales resistentes (R/R o RS/RS) y susceptibles (S/S), los cruces F1 (S/R, S/RS y R/RS) y los retrocruzamientos indican que la resistencia a malatión es semi-dominante en ambos casos. Sin embargo, nuestros resultados no fueron concluyentes con respecto a la naturaleza monogénica de la resistencia a malatión en estas isolíneas. Por lo tanto, no podemos descartar que otros genes que contribuyan a la resistencia, además de la mutación G328A (isolínea 267Y) y de la duplicación del gen Ccace2 (isolínea 306TY), puedan haber sido seleccionados durante el proceso de selección de 267Y y 306TY. Varios parámetros biológicos fueron evaluados para determinar si estos dos mecanismos de resistencia a malatión suponen un coste biológico para los genotipos resistentes. Individuos con genotipo R/R mostraron un retraso en el tiempo de desarrollo de huevo a pupa, un peso de pupa reducido y una menor longevidad de los adultos, en comparación con los individuos con genotipo S/S. Sin embargo, el peso de pupa de los individuos con genotipo RS/RS fue similar al de los individuos S/S, y su desarrollo de huevo a pupa intermedio entre S/S y R/R. Estas diferencias en el coste biológico pueden estar relacionadas con la reducción de la eficiencia catalítica de la AChE mutada en los individuos R/R, y al efecto compensatorio que la copia no mutada del gen tiene en los individuos RS/RS que portan la duplicación. La estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación se analizó mediante el seguimiento de los caracteres de resistencia en la progenie de retrocruzamientos S/R x R/R y S/RS x RS/RS a lo largo de varias generaciones en ausencia de presión de selección con insecticidas. Nuestros resultados muestran que la frecuencia del alelo que porta la mutación G328A disminuyó desde 67,5% en la primera generación del retrocruzamiento S/R x R/R (75% esperado, asumiendo segregación mendeliana y que sólo hay dos alelos: uno mutado y otro no mutado) a 12% después de 10 generaciones. Por el contrario, la frecuencia de la duplicación sólo disminuyó desde 75% en en la primera generación del retrocruzamiento S/RS x RS/RS (75% esperado, asumiendo segregación Mendeliana y que la duplicación segrega como un único alelo) a 50% en el mismo período, lo que indica que la duplicación es más estable que la mutación. Asimismo, se analizó la presencia de la mutación y de la duplicación en poblaciones de campo recogidas en seis localidades en 2004-2007, cuando todavía se usaba el malatión, y se comparó con poblaciones recogidas en los mismos campos en 2010, un año después de la prohibición del malatión en la Unión Europea. La frecuencia media del genotipo susceptible (S/S) aumentó del 55,9% en el período 2004-2007 a 70,8% en 2010, mientras que la frecuencia de los genotipos portadores de la mutación en homocigosis o heterocigosis (R/R y S/R) disminuyó del 30,4 al 9,2%, los que llevan la duplicación en homocigosis o heterocigosis (RS/RS y S/RS) aumentaron levemente desde 12,8 hasta 13,3%, y los que llevan a la vez la mutación y la duplicación (R/RS) también aumentaron del 1 al 6,7%. Estos resultados son consistentes con que la duplicación del gen Ccace2 (con una copia con la mutación G328A y la otra copia no mutada) es más ventajosa que la mutación G328A por si sola, ya que la duplicación mantiene los niveles de resistencia a la vez que limita el coste biológico. Para investigar la asociación entre la resistencia a malatión y las mutaciones encontradas previamente en CcE7, hemos generado isolíneas con mutaciones específicas seleccionadas por su ubicación próxima a la entrada al centro activo de la enzima. La isolínea Sm2 (procedente de una hembra heterocigota para la mutación V96L y un macho homocigoto para el alelo no mutado) mantuvo altos niveles de resistencia a malatión, incluso después de 30 generaciones sin presión de selección. Por el contrario, la isolínea 267Y (compuesta por individuos homocigotos para la mutación L267Y) y la línea 306TY (compuesta por individuos homocigotos para la doble mutación R306T-N307Y) mostraron una reducción significativa en los niveles de resistencia. También hemos encontrado que la resistencia a malatión de la línea Sm2 fue parcialmente revertida por DEF y TPP, y que Sm2 mostró una reducción significativa en la actividad MTB, como se ha descrito en otras especies que muestran resistencia específica a malatión mediada por aliesterases. Además, fue posible asociar la presencia de la mutación V96L en individuos de la línea Sm2 con supervivencia a una concentración discriminante de malatión (5,000 ppm) y con una baja actividad MTB. Estos resultados sugieren una posible relación entre la mutación V96L en la aliesterasa CcE7 y la resistencia a malatión, aunque todavía no se puede concluir que la resistencia es causada por esta mutación, siendo necesarios más estudios para comprobar su contribución a la resistencia. En conclusión, se ha encontrado por primera vez resistencia a lambda-cihalotrina en poblaciones de campo de C. capitata, y nuestros resultados indican que las P450 son el principal mecanismo de resistencia en la línea W-1K. Esta situación se suma al caso previamente descrito de resistencia en campo a malatión asociada a la mutación G328A, a la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas. Nuestros resultados también indican que la alteración de la molécula diana AChE parece ser responsable de un cierto nivel de resistencia a malatión en C. capitata, que puede ser estimada como aproximadamente 25-40 veces para la mutación G328A y 40-60 veces para la duplicación; mientras que la resistencia mediada por esterasas y que ha sido asociada en este estudio con la mutación V96L en CcE7 puede conferir un efecto multiplicativo (por un factor de 5 a 10) aumentando la resistencia a malatión a 200-400 veces. Por otra parte, hemos demostrado que los insectos resistentes que llevan la duplicación tienen un coste biológico menor y muestran una estabilidad mayor que aquellos con la mutación G328A en ausencia de presión de selección con insecticidas. Esto representa un escenario en el que los genotipos con la duplicación permanecerán en el campo en frecuencias bajas a moderadas, pero podrían ser seleccionados rápidamente si se utilizan malatión u otros insecticidas que muestren resistencia cruzada. Estos resultados tienen importantes implicaciones para los programas de manejo de la resistencia, ya que el repertorio de insecticidas eficaces para el control de C. capitata es cada vez más limitado. Además, la coexistencia de múltiples mecanismos de resistencia en poblaciones de campo ofrece el potencial para desarrollar resistencia frente a otros insecticidas disponibles para el control de esta plaga. Estrategias para de manejo de la resistencia basadas en la alternancia de insecticidas con diferentes modos de acción, y su combinación con otros métodos de control, deben ser implementadas para evitar el desarrollo de resistencia en campo. ABSTRACT The Mediterranean fruit fly (Medfly), Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), is one of the most economically damaging pests of citrus and other fruit crops worldwide. Control measures in citrus crops in Spain from the mid 90's to 2009 were mainly based on field monitoring of population levels and aerial and ground treatments with malathion bait sprays. However, since the withdrawal of phytosanitary products containing malathion in the European Union in 2009, lambda-cyhalothrin and spinosad have become the most widely used insecticides for the control of this pest. Resistance to malathion was found in Spanish field populations of C. capitata in 2004-2005. This resistance has been associated with a mutation G328A in the acetylcholinesterase (AChE), a duplication of the AChE gene (Ccace2) (one of the copies bearing the mutation G328A), and metabolic resistance mediated by esterases (probably aliesterases). However, when the gene of the aliesterase CcE7 was sequenced in individuals from a malathion resistant strain of C. capitata, none of the known G137D and/or W251L/S/G mutations associated to resistance in other species were found, though other mutations were detected when compared with individuals from a susceptible strain. Noteworthy, a lambda-cyhalothrin resistant strain (W-1K) was obtained by selecting a field-derived malathion resistant strain (W-4Km) with lambda-cyhalothrin. Moreover, it has also been demonstrated the capacity of this species to develop resistance to spinosad by laboratory selection. The multiple resistance mechanisms identified highlight the potential of this species to develop resistance to insecticides with different modes of action. The objectives of this PhD Thesis are: 1) to assess the susceptibility of Spanish field populations of C. capitata to lambda-cyhalothrin and to elucidate the resistance mechanisms in the W-1Kλ strain; 2) to compare the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A); and 3) to investigate the role of the aliesterase CcαE7 mutations in malathion resistance. All these studies will be of use for devising proactive resistance management strategies that could prevent or delay resistance development and would increase the sustainability of the insecticides available for Medfly control. Our results indicate that Spanish field populations of C. capitata have developed resistance to lambda-cyhalothrin. The LC50 values estimated for populations collected at Comunidad Valenciana, Cataluña and Andalucía ranged from 129 ppm to 287 ppm, equaling or overpassing the recommended concentration for field treatments (125 ppm). These results contrast with those obtained with three different Tunisian field populations, whose susceptibility was similar to that of the control (C) strain. The lambda-cyhalothrin resistant W-1K strain has been further selected to achieve a 205-fold resistance compared to the C strain, being its LC50 (4,224 ppm) more than 30 times higher than the recommended concentration for field applications. This resistant strain showed high levels of cross-resistance to deltamethrin (150-fold) and etofenprox (240-fold), suggesting that the development of resistance to lambda-cyhalothrin may compromise the effectiveness of other pyrethroids for the control of this species. We have shown that the resistance of the W-1K strain to lambda-cyhalothrin was almost completely suppressed by the synergist PBO, indicating that P450 enzymes play a very important role in resistance to this insecticide. However, both susceptible C and resistant W-1K flies were knocked down after topical treatment with lambda-cyhalothrin, suggesting that kdr resistance mediated by alterations of the target site is not playing a major role. Metabolic resistance mediated by P450 was further analyzed by comparing the expression of 53 genes of the families CYP4, CYP6, CYP9 and CYP12 in adults flies from the resistant W-1K and the susceptible C strains. We found that the gene CYP6A51 (GenBank accession number XM_004534804) was overexpressed (13-18-fold) in the W-1K strain. Moreover, the expression of the CYP6A51 gene was induced when adults of the W-1K and C strains were treated with lambda-cyhalothrin. However, no significant differences were obtained between susceptible C and resistant W-1K strains for the quantity of P450 and for the activity of NADPH- cytochrome c reductase measured in microsomal fractions obtained from abdomens. Moreover, we failed to correlate the metabolism of deltamethrin, analyzed in vitro by incubating this insecticide with microsomal fractions, with the resistance level against this pyrethroid observed in bioassays with W-1K. The sequencing of the 5´UTR region of the CYP6A51 gene failed in finding an alteration in the promoter region (-500 bp from translation start site) that could explain overexpression in the W-1K strain. All data obtained suggest that resistance to lambda-cyhalothrin in the W- 1K strain is mediated by P450 and that overexpression of CYP6A51 may play a major role, although further evidences are needed to establish a direct association of resistance with this gene. We have studied the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A). The malathion-susceptible C strain where the G328A mutation is not found (S/S genotype) was crossed with two isolines established to represent unique genotypes corresponding to the two target-site resistance mechanisms: 1) the 267Y isoline (genotype R/R) was established from a couple bearing the mutation G328A in homozygosis; and 2) the 306TY isoline (genotype RS/RS) was established from a couple being homozygous for the duplication of the Ccace2 gene. Reciprocal crosses have not been performed, since in situ hybridization on polythene chromosomes showed that the AChE locus and the duplication (most probably in tandem) are placed at the autosomal chromosome 2L. Mortality responses to malathion of resistant isolines (R/R or RS/RS) and susceptible (S/S) genotypes, F1 crosses (S/R, S/RS, and R/RS), and the back-crosses indicated that resistance to malathion is inherited as a semi-dominant trait in both cases. However, our results were not conclusive about the monogenic nature of the resistance to malathion in these isolines. Thus, we can not discard that other genes contributing to resistance, in addition to the mutation G328A (isoline 267Y) and the duplication of the Ccace2 gene (isoline 306TY), may have been selected during the selection process of 267Y and 306TY. Several biological parameters were evaluated to determine if these two malathion resistance mechanisms impose a fitness cost for resistant genotypes. Individuals with genotype R/R have a reduced fitness in terms of developmental time from egg to pupa, pupal weight and adult longevity, when compared to susceptible individuals (genotype S/S). Interestingly, the fitness cost was substantially diminished in individuals with genotype RS/RS. These differences in fitness may be related to the reduction of the catalytic efficiency of mutated AChE in individuals R/R, and the compensatory effect that the non-mutated copy of the gene has on individuals RS/RS bearing the duplication. The stability of malathion reistance associated with the mutation G328A or the duplication was analyzed by following these resistant traits in the progeny of the back-crosses S/RS x RS/RS and S/R x R/R over consecutive generations in the absence of insecticide selection pressure. Our results show that the frequency of the allele bearing the mutation G328A decreased from 67.5% at the first generation of the back-cross S/R x R/R (75% expected, assuming Mendelian segregation and that there are only two alleles: one mutated and the other non-mutated) to 12% after 10 generations. By contrast, the frequency of the duplication only declined from 75% at the first generation of the back-cross S/RS x RS/RS (75% expected, assuming Mendelian segregation and that the duplication segregates as an unique allele) to 50% in the same period, indicating that the duplication is more stable than the mutation. The presence of the mutation and the duplication was analyzed in field populations collected in six localities in 2004-2007, when malathion was still used, and compared to populations collected in the same fields in 2010, one year after the prohibition of malathion in the European Union. The average frequency of the susceptible genotype (S/S) increased from 55.9% in the period 2004-2007 to 70.8% in 2010, whereas the frequency of those genotypes carrying the mutation in homozygosis or heterozygosis (R/R and S/R) declined from 30.4 to 9.2%, those carrying the duplication in homozygosis or heterozygosis (RS/RS and S/RS) increased slightly from 12.8 to 13.3%, and those carrying both the mutation and the duplication (R/RS) also increased from 1 to 6.7%. These results are consistent with the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A and the other copy non-mutated) being more advantageous than the G328A mutation alone by maintaining resistance while restoring part of the fitness. In order to investigate the association of malathion resistance with mutations previously found in the aliesterase CcE7, we have generated isolines bearing specific mutations selected by their putative location near the upper part of the active site gorge of the enzyme. The isoline Sm2 (originating from a female heterozygous for the mutation V96L and a male homozygous for the non-mutated allele) kept high levels of resistance to malathion, even after 30 generations without selection pressure. On the contrary, the isoline 267Y (composed by individuals homozygous for the mutation L267Y) and the strain 306TY (composed by homozygous for the double mutation R306T-N307Y) showed a significant reduction in the levels of resistance. We have found also that resistance to malathion in the Sm2 isoline was partially reverted by DEF and TPP, and that Sm2 showed a significant reduction in MTB activity, as reported for other species showing malathion-specific resistance mediated by aliesterases. Besides, it was possible to associate the presence of the mutation V96L in individuals from the Sm2 isoline with both survival to a discriminating concentration of malathion (5,000 ppm) and low MTB activity. Our results point out to a possible connection betwen the mutation V96L in the aliesterase CcE7 and resistance to malathion, though we can not yet conclude that the resistance is caused by the mutation, being needed further work to understand its contribution to resistance. In conclusion, resistance to lambda-cyhalothrin has been found for the first time in field populations of C. capitata, and metabolic resistance mediated by P450 appears to be the main resistance mechanism in the resistant strain W-1K. These findings add to the previously reported case of field resistance to malathion, associated to the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A) and to metabolic resistance mediated by esterases. Our results also indicate that altered target site AChE appears to be responsible for a certain level of resistance to malathion in C. capitata, that can be estimated as about 25-40-fold for the mutation G328A and 40-60-fold for the duplication; whereas metabolic resistance mediated by esterases and associated in this study with the mutation V96L in CcE7 may confer a multiplicative effect (by a factor of 5 to10) increasing malathion resistance to 200-400-fold. Moreover, we have shown that resistant insects carrying the duplication have better fitness and exhibit a higher stability than those with the mutation G328A in the absence of insecticide pressure. This represents a scenario where genotypes with the duplication will remain in the field at low to moderate frequencies, but could be rapidly selected if malathion or other insecticides showing cross-resistance are used. These findings have important implications for resistance management programs, as the repertoire of effective insecticides for C. capitata control is becoming very limited. Besides, multiple resistance mechanisms coexisting in field populations provide the potential to develop resistance to other available insecticides for the control of this pest. Appropriate resistance management strategies based on the alternation of insecticides with different modes of action, and their combination with other control methods, must then be implemented to avoid the evolution of resistance in the field.

EUSAAR size distribution analysis database

Two years of harmonized aerosol number size distribution data from 24 European field monitoring sites have been analysed. The results give a comprehensive overview of the European near surface aerosol particle number concentrations and number size distributions between 30 and 500 nm of dry particle diameter. Spatial and temporal distribution of aerosols in the particle sizes most important for climate applications are presented. We also analyse the annual, weekly and diurnal cycles of the aerosol number concentrations, provide log-normal fitting parameters for median number size distributions, and give guidance notes for data users. Emphasis is placed on the usability of results within the aerosol modelling community. We also show that the aerosol number concentrations of Aitken and accumulation mode particles (with 100 nm dry diameter as a cut-off between modes) are related, although there is significant variation in the ratios of the modal number concentrations. Different aerosol and station types are distinguished from this data and this methodology has potential for further categorization of stations aerosol number size distribution types. The European submicron aerosol was divided into characteristic types: Central European aerosol, characterized by single mode median size distributions, unimodal number concentration histograms and low variability in CCN-sized aerosol number concentrations; Nordic aerosol with low number concentrations, although showing pronounced seasonal variation of especially Aitken mode particles; Mountain sites (altitude over 1000 m a.s.l.) with a strong seasonal cycle in aerosol number concentrations, high variability, and very low median number concentrations. Southern and Western European regions had fewer stations, which decreases the regional coverage of these results. Aerosol number concentrations over the Britain and Ireland had very high variance and there are indications of mixed air masses from several source regions; the Mediterranean aerosol exhibit high seasonality, and a strong accumulation mode in the summer. The greatest concentrations were observed at the Ispra station in Northern Italy with high accumulation mode number concentrations in the winter. The aerosol number concentrations at the Arctic station Zeppelin in Ny-Ålesund in Svalbard have also a strong seasonal cycle, with greater concentrations of accumulation mode particles in winter, and dominating summer Aitken mode indicating more recently formed particles. Observed particles did not show any statistically significant regional work-week or weekday related variation in number concentrations studied. Analysis products are made for open-access to the research community, available in a freely accessible internet site. The results give to the modelling community a reliable, easy-to-use and freely available comparison dataset of aerosol size distributions.

Mercury in Gas Operations - Occupational Health Risk Assessment

The project goal was to determine plant operations and maintenance worker’s level of exposure to mercury during routine and non-routine (i.e. turnarounds and inspections) maintenance events in eight gas processing plants. The project team prepared sampling and analysis plans designed to each plant’s process design and scheduled maintenance events. Occupational exposure sampling and monitoring efforts were focused on the measurement of mercury vapor concentration in worker breathing zone air during specific maintenance events including: pipe scrapping, process filter replacement, and process vessel inspection. Similar exposure groups were identified and worker breathing zone and ambient air samples were collected and analyzed for total mercury. Occupational exposure measurement techniques included portable field monitoring instruments, standard passive and active monitoring methods and an emerging passive absorption technology. Process sampling campaigns were focused on inlet gas streams, mercury removal unit outlets, treated gas, acid gas and sales gas. The results were used to identify process areas with increased potential for mercury exposure during maintenance events. Sampling methods used for the determination of total mercury in gas phase streams were based on the USEPA Methods 30B and EPA 1631 and EPA 1669. The results of four six-week long sampling campaigns have been evaluated and some conclusions and recommendations have been made. The author’s role in this project included the direction of all field phases of the project and the development and implementation of the sampling strategy. Additionally, the author participated in the development and implementation of the Quality Assurance Project Plan, Data Quality Objectives, and Similar Exposure Groups identification. All field generated data was reviewed by the author along with laboratory reports in order to generate conclusions and recommendations.