Experimental study of bottom feed updraft gasifier

The updraft biomass gasifiers currently available produce a gas with high tar content. For almost all downstream applications a substantial reduction of the tar concentration is required. The gravimetric tar concentration behavior in producer gas, obtained at a modified updraft fixed bed gasifier, was studied. The feedstock feeding system was modified respect to the traditional updraft gasification design in order to decrease the tar concentration in the producer gas; the material is feeding continuously through a conduit in the base of the reactor over the grate. The caloric power of the syngas obtained was slightly lower than the typical value for this type of reactor and the highest efficiency obtained for the woodchip gasification was 77%. The highest tar concentration obtained during the experiments was 1652.7 mg N m-3 during the first our of experiments, comparable with the smaller value reported for the updraft reactors, this value is reduced significantly after the stabilization of the gasification process in the reactor. The smaller value obtained was 21 mg N m-3. © 2013 Elsevier Ltd.

Avaliação bioeconômica de bezerros lactentes recebendo diferentes fontes protéicas em cocho privativo em pastagens de Brachiaria brizantha cv. Marandú manejada intensivamente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Segurança alimentar em comunidades quilombolas: estudo comparativo de Santo Antonio (Concórdia do Pará) e Cacau (Colares, Pará)

Nesta pesquisa apresentam-se as noções de segurança alimentar, soberania e a dinâmica de grupos quilombolas através da análise e discussão da dieta alimentar e suas transformações nas comunidades do Cacau e Santo Antônio a partir do estudo dos meios de aquisição, relações sociais e influência na saúde das populações. O sistema de alimentação das localidades passa por um processo de mudança ocasionado, sobretudo pelo esgotamento dos recursos da natureza associado ao crescimento populacional e à pressão externa sobre os territórios fazendo com que se demande por mais recursos financeiros para a sua aquisição, o que contribui de maneira negativa na dieta, além de ocasionar mudanças nos hábitos alimentares. O efeito da alimentação na dieta dos grupos sociais é demonstrado através de uma avaliação nutricional realizada entre os membros das famílias (adultos, adolescentes e crianças). Assim se faz uma comparação entre os resultados da pesquisa nas duas comunidades de maneira que se observem as diferenças e as singularidades em relação à segurança alimentar e nutricional.

Resposta fisiológica, qualidade da carne e expressão gênica no músculo esquelético de frangos de corte sob estresse por calor que receberam antioxidantes na dieta

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Altas frequências de arraçoamento nas fases iniciais da criação de Tilápia em hapas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do sistema de alimentação e grupo racial no desempenho, características de carcaça e qualidade da carne de cabritos confinados

Pós-graduação em Zootecnia - FMVZ

Potentials of biogas production from young bulls manure fed with different diets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Retificador entrelaçado com elevado fator de potência para operação de um veículo trólebus alimentado por redes em CA Ou CC

This paper presents the development and the main results for an interleaved boost rectifier operating as a special input power stage for a trolleybus type vehicle, allowing its feeding by alternate current (AC) or direct current (DC) distribution power systems. When feeding with two wires (single phase) alternate current distribution system, the converter accomplish active power factor correction, providing a relatively sinusoidal current with low total harmonic distortion (THD) and fully complying with IEC 61000-3-4 standards. In addition, a management control system promotes the required automatic operation changes for the proposed rectifier when the vehicle is changing from the DC distribution power system to the AC distribution power system and vice-versa, keeping its original electrical DC system characteristics for the adjustable speed driver sub-system. The main experimental results for a prototype rated at 150kW are presented, considering its application for a trolleybus with DC adjustable speed driver, demonstrating the proposed converter benefits and the possibility of AC feeding system for trolleybus type vehicle.

Marco legal do Programa Nacional de Alimentação Escolar: uma releitura para alinhar propósitos e práticas na aquisição de alimentos

This essay aims to discuss the acquisition of food by the National School Feeding Program in light of its current legal framework with a view to promote healthy and culturally sound eating habits that help to improve the health of Brazilian school children and promote local development. The study presents an analysis of the current legislation of the National School Feeding Program, evidencing its intention to influence the Brazilian feeding system and the food pattern of its population using school meals, highlighting the gaps that challenge the achievement of major changes in the execution of the program. From this analysis and based on the high and growing consumption of ultra-processed foods in Brazil, and considering the disadvantages of these foods when compared with minimally-processed or fresh foods, a proposal is developed to guide the construction of a list of foods that is consistent with the current legal framework of the Program and its objectives. It is argued that the prevalence of minimally-processed or fresh foods in school meals can be a strategy to rescue the healthy-food heritage and strengthen local development if promoting family farming.

Thermal design of a tray-type distillation column of an ammonia/water absorption refrigeration cycle

The goal of this paper is to present an analysis of a segmented weir sieve-tray distillation column for a 17.58 kW (5 TR) ammonia/water absorption refrigeration cycle. Balances of mass and energy were performed based on the method of Ponchon-Savarit, from which it was possible to determine the ideal number of trays. The analysis showed that four ideal trays were adequate for that small absorption refrigeration system having the feeding system to the column right above the second tray. It was carried out a sensitivity analysis of the main parameters. Vapor and liquid pressure drop constraint along with ammonia and water mass flow ratios defined the internal geometrical sizes of the column, such as the column diameter and height, as well as other designing parameters. Due to the lack of specific correlations, the present work was based on practical correlations used in the petrochemical and beverage production industries. The analysis also permitted to obtain the recommended values of tray spacing in order to have a compact column. The geometry of the tray turns out to be sensitive to the charge of vapor and, to a lesser extent, to the load of the liquid, being insensible to the diameter of tray holes. It was found a column efficiency of 50%. Finally, the paper presents some recommendations in order to have an optimal geometry for a compact size distillation column. (c) 2011 Elsevier Ltd. All rights reserved.

Desarrollo de las técnicas de producción de larvas de bocinegro (Pagrus pagrus) en Canarias

The incorporation of new marine species in aquaculture is esencial to development of this activity. The recent advances on the establishment oftechniques to produce red porgy (Pagrus pagrus), allow to consider it as a strong potencialto aquaculture, being predictable its implement in the Canary Archipel. Neverthe!ess, so far it is not posible to produce it comercially, due to difficulties in assuring a continual supply of larvae and fry. Knowing this, it is crucialto continue studying the production techniques oflarvae and the feeding system during this periodo For this, the aim of tbe work is to optimize production

A gas ion source for radiocarbon measurements at 200 kV

The novel tabletop miniaturized radiocarbon dating system (MICADAS) at ETH Zurich features a hybrid Cs sputter negative ion source for the measurement of solid graphite and gaseous CO2 samples. The source produces stable currents of up to 6 mu A C- out of gaseous samples with an efficiency of 3-6%. A gas feeding system has been set up that enables constant dosing of CO2 into the Cs sputter ion source and ensures stable measuring conditions. The system is based on a syringe in which CO2 gas is mixed with He and then pressed continuously into the ion source at a constant flow rate. Minimized volumes allow feeding samples of 3-30 mu g carbon quantitatively into the ion source. In order to test the performance of the system, several standards and blanks have successfully been measured. The ratios of C-14/C-12 could be repeated within statistical errors to better than 1.0% and the C-13/C-12 ratios to better than 0.2%. The blank was < 1 pMC.

Antimicrobial drug use and risk factors associated with treatment incidence and mortality in Swiss veal calves reared under improved welfare conditions

Ninety-one Swiss veal farms producing under a label with improved welfare standards were visited between August and December 2014 to investigate risk factors related to antimicrobial drug use and mortality. All herds consisted of own and purchased calves, with a median of 77.4% of purchased calves. The calves' mean age was 29±15days at purchasing and the fattening period lasted at average 120±28 days. The mean carcass weight was 125±12kg. A mean of 58±33 calves were fattened per farm and year, and purchased calves were bought from a mean of 20±17 farms of origin. Antimicrobial drug treatment incidence was calculated with the defined daily dose methodology. The mean treatment incidence (TIADD) was 21±15 daily doses per calf and year. The mean mortality risk was 4.1%, calves died at a mean age of 94±50 days, and the main causes of death were bovine respiratory disease (BRD, 50%) and gastro-intestinal disease (33%). Two multivariable models were constructed, for antimicrobial drug treatment incidence (53 farms) and mortality (91 farms). No quarantine, shared air space for several groups of calves, and no clinical examination upon arrival at the farm were associated with increased antimicrobial treatment incidence. Maximum group size and weight differences >100kg within a group were associated with increased mortality risk, while vaccination and beef breed were associated with decreased mortality risk. The majority of antimicrobial treatments (84.6%) were given as group treatments with oral powder fed through an automatic milk feeding system. Combination products containing chlortetracycline with tylosin and sulfadimidine or with spiramycin were used for 54.9%, and amoxicillin for 43.7% of the oral group treatments. The main indication for individual treatment was BRD (73%). The mean age at the time of treatment was 51 days, corresponding to an estimated weight of 80-100kg. Individual treatments were mainly applied through injections (88.5%), and included administration of fluoroquinolones in 38.3%, penicillines (amoxicillin or benzylpenicillin) in 25.6%, macrolides in 13.1%, tetracyclines in 12.0%, 3th and 4th generation cephalosporines in 4.7%, and florfenicol in 3.9% of the cases. The present study allowed for identifying risk factors for increased antimicrobial drug treatment and mortality. This is an important basis for future studies aiming at reducing treatment incidence and mortality in veal farms. Our results indicate that improvement is needed in the selection of drugs for the treatment of veal calves according to the principles of prudent use of antibiotics.

Chemical composition of rocks and minerals from the Karymsky volcanic center, Eastern Kamchatka

The powerful eruption in the Akademii Nauk caldera on January 2, 1996 marked a new activity phase of the Karymsky volcano and became a noticeable event in the history of modern volcanism in Kamchatka. The paper reports data obtained by studying more than 200 glassy melt inclusions in phenocrysts of olivine (Fo82-72), plagioclase (An92-73), and clinopyroxene (Mg# 83-70) in basalts of the 1996 eruption. The data were used to estimate composition of the parental melt and physicochemical parameters of the magma evolution. According to our data, the parental melt corresponded to low magnesium, high aluminum basalt (SiO2 = 50.2%, MgO = 5.6%, Al2O3 = 17%) of the mildly potassium type (K2O = 0.56%) and contained much dissolved volatile components (H2O = 2.8%, S = 0.17%, and Cl = 0.11%). Melt inclusions in the minerals are similar in chemical composition, a fact testifying that the minerals crystallized simultaneously with one another. Their crystallization started at pressure ~1.5 kbar, proceeded within a narrow temperature range of 1040+/-20°C, and continued until near-surface pressure ~100 bar was reached. Degree of crystallization of the parental melt during its eruption was close to 55%. Massive crystallization was triggered by H2O degassing under pressure <1 kbar. Magma degassing in an open system resulted in escape of 82% H2O, 93% S, and 24% Cl (of their initial contents in the parental melt) to the fluid phase. Release of volatile compounds to the atmosphere during the eruption that lasted for 18 h was estimated as 1.7x10**6 t H2O, 1.4x10**5 t S, and 1.5x10**4 t Cl. Concentrations of most incompatible trace elements in the melt inclusions are close to those in the rocks and to the expected fractional differentiation trend. Melt inclusions in plagioclase were found to be selectively enriched in Li. The Li-enriched plagioclase with melt inclusions thought to originate from cumulate layers in the feeding system beneath Karymsky volcano, in which plagioclase interacted with Li-rich melts/brines and was subsequently entrapped and entrained by the magma during the 1996 eruption.

Diseño de un sistema automático de medida de la constante de Planck en diodos LED

En este proyecto fin de carrera se ha diseñado y construido un equipo de medida automático que permite realizar la medida de la constante de Planck utilizando los principios de Funcionamiento de los diodos LED. El equipo de medida es totalmente automático gracias a la utilización de una placa controladora Arduino MEGA 2560, que se encarga de realizar la iluminación secuencial de cada LED, medir sus tensiones de funcionamiento, y de realizar los cálculos necesarios para hallar la constante de Planck. Todos los datos se muestran por una pantalla LCD de 16 caracteres por 2 lineas. Para comprender el funcionamiento del sistema de medida automático se ha realizado un estudio detallado de cada uno de los sistemas que componen el equipo de medida. Se ha explicado el funcionamiento teórico de los diodos LED y el funcionamiento de los semiconductores. Se ha explicando los diversos tipos de semiconductores que se utilizan para los LED y las modificaciones que se les aplica para mejorar su eficiencia. Para poder comprender en qué consiste la constante de Planck se ha explicado los principios teóricos en que se basa, y se ha realizado una pequeña demostración de su cálculo. Una vez visto todos los principios teóricos se ha pasado a realizar la explicación de cada uno de los grandes bloques que componen el sistema de medida automático. Estos bloques son la placa controladora Arduino, el sistema de iluminación LED, el sistema de control mecánico de LEDs, la pantalla LCD, el sistema de interrupciones y el sistema de alimentación. Para poder observar el espectro de emisión de cada uno de los LED se ha utilizado un analizador de espectros óptico (OSA), el cual ha sido explicado con detenimiento. El código de programación de Arduino ha sido explicado en forma de diagrama de flujo para una mayor facilidad de comprensión. Se ha desarrollado un manual de usuario para facilitar el uso del sistema a cualquier usuario, en el que se ha introducido un ejemplo completo de funcionamiento. ABSTRACT. In this final Project has designed and built an automatic measuring equipment which is able to measure the Planck`s constant using the operation principles of the LEDs. The measuring equipment is fully automated thanks to the use of an Arduino Mega 2560 controller board, which is responsible for conducting sequential illumination of each LED, measure their operating voltages, and perform the necessary calculations of find the Planck constant. All data is displayed by a LCD screen 16 character by 2 lines. To understand the operation of the automatic measuring system has been made a detailed study of each of the systems that make the measurement equipment. It develops the theoretical performance of the LED and the operation of semiconductors. It explains the different types of semiconductors that are used for LEDs and the changes applied to improve efficiency. In order to understand what is the Planck constant has been explained the theoretical principles in which it is based, and a small demonstration of its calculation has been performed. After seeing all the theoretical principles has been made the explanation of each of the main blocks that compose the automatic measuring system. These blocks are the Arduino controller board, LED lighting system, the mechanical control system LEDs, LCD screen, the interrupt system and feeding system. To observe the emission spectrum of each of the LED has been used optical spectrum analyzer (OSA), which has been explained in detail. The Arduino programming code has been explained in flowchart form for an easy understanding. It has developed a manual to facilitate the use of system to any user, which has introduced a complete example of operation.