Is Malting Barley Better Feed for Cattle than Feed Barley?

Barley grain from a combined intermediate and advanced barley breeding trial was assessed for grain, feed and malt quality from two sites over two consecutive years, with the objective to ascertain relationships between these traits. Results indicated there were genetic effects for both malt (hot water extract and friability) and “feed” traits (as measured by hardness, acid detergent fibre, starch and in-sacco dry matter digestibility). The feed trait values were generally independent of the malt trait values. However, there were positive relationships between friability, hardness and protein, as well as a negative relationship between extract and husk. Extract also had a positive relationship with test weight but appeared to be independent from the feed traits. Test weight also showed little relationship to the feed traits. Heritability values ranged from low to high for almost all traits. This study details where both malt and cattle feed parameters have been compared and the results indicated that while malt and feed traits do not correlate directly, malt cultivars can exhibit excellent feed characteristics, equal to or better than feed cultivars. This data highlights the benefit of selecting for malt quality even if a breeding program would be interested at targeting specific feed quality.

NIRS calibrations for predicting the nutritional quality of feed

NIRS calibrations for predicting the nutritional quality of feed.

Improving efficiency of pig feed manufacturing and application of additives

Improving the efficiency of pig feed manufacturing and application of additives.

Lot feeding and intensive livestock manure and effluent management

Manure management emissions may present much greater opportunity for greenhouse gas mitigation in the feedlot, pig, chicken meat, egg and diary industries, than the current IPCC and DCC calculation guidelines suggest. Current literature and understanding of manure mass loss throughout the manure management system does not support these current guidelines; in which the emission rates are fixed and consequently don't allow incentives for reduced emissions.

Improving the efficiency of pig feed manufacturing and application of additives

This project aims to reduce production costs for high-quality pork through understanding how commercial processing conditions affect mill throughput, processing energy efficiency, product durability and the nutritional value of pig feed.

Addressing the demand for feed grains through the development of high yielding

Development and evaluation of high yielding feed wheat grermplasm.

A review of potential contaminants in Australian livestock feeds and proposed guidance levels for feed

Contaminants of man-made and natural origin need to be managed in livestock feeds to protect the health of livestock and that of human consumers of livestock products. This requires access to information on the transfer from feed to food to inform risk profiles and assessments, and to guide management interventions such as regulation or Hazard Analysis Critical Control Point approaches. This paper reviews contaminants of known and potential concern in the production of livestock feeds in Australia and compares existing but differing state and national regulatory standards with international standards. The contaminants considered include man-made organic chemical contaminants (e.g. legacy pesticides), elemental contaminants (e.g. arsenic, cadmium, lead), phytotoxins (e.g. gossypol) and mycotoxins (e.g. aflatoxins). Reference is made to scientific literature and evaluations by regulators to propose maximum levels that can be used for guidance by those involved in managing contamination incidents or developing feed safety programs. © 2013 CSIRO.

Liveweight gain and feed intake of weaned Bali cattle fed a range of diets in Central Sulawesi, Indonesia

Three experiments were conducted to determine liveweight (W) gain and feed and water intake of weaned Bali cattle offered a range of feed types. In each experiment, 18 weaned entire male Bali cattle were allocated to three treatment groups in a completely randomised block design, with six replicates (animals) per treatment. The dietary treatments were: Experiment 1, native grass fed ad libitum, native grass supplemented with rice bran at 10 g dry matter (DM)/kg W.day and native grass supplemented with a mixture of rice bran and copra meal in equal proportions fed at 10 g DM/kg W.day; Experiment 2, elephant grass hay fed ad libitum, elephant grass supplemented with gliricidia at 10 g DM/kg W.day, and gliricidia fed ad libitum; and Experiment 3, corn stover fed ad libitum, corn stover supplemented with gliricidia at 10 g DM/kg W.day, and corn stover supplemented with rice bran/copra meal in equal amounts (w/w) at 10 g DM/kg W.day. Each experiment was 10 weeks in duration, consisting of a 2-week preliminary period for adaptation to diets and an 8-week experimental period for the measurement of W change, feed and water intake and digestibility of the diet. Growth rates of 6-12-month-old, entire male Bali cattle fed a range of local diets ranged from 0.10 and 0.40 kg/day. Lowest growth rates occurred when the cattle were given the basal diets of native grass (0.104 kg/day), elephant grass (0.174 kg/day) and corn stover (0.232 kg/day). With the addition of supplements such as rice bran, rice bran/copra meal or gliricidia to these basal diets liveweight gains increased to between 0.225 and 0.402 kg/day. Forage DM intake was reduced with these supplements by on average 22.6% while total DM intake was increased by an average of 10.5%. The growth rate on gliricidia alone was 0.269 kg/day and feed DM intake was 28.0 g/kg W.day. Water intake was not affected by supplement type or intake. In conclusion, inclusion of small quantities of locally available, high quality feed supplements provide small-holder farmers with the potential to increase growth rates of Bali calves from 0.1 to 0.2 kg/day, under prevailing feeding scenarios, to over 0.4 kg/day.

Correlation between NIRS generated and chemically measured feed quality data in barley (Hordeum vulgare), and potential use in QTL analysis identification

A study was performed to investigate the value of near infrared reflectance spectroscopy (NIRS) as an alternate method to analytical techniques for identifying QTL associated with feed quality traits. Milled samples from an F6-derived recombinant inbred Tallon/Scarlett population were incubated in the rumen of fistulated cattle, recovered, washed and dried to determine the in-situ dry matter digestibility (DMD). Both pre- and post-digestion samples were analysed using NIRS to quantify key quality components relating to acid detergent fibre, starch and protein. This phenotypic data was used to identify trait associated QTL and compare them to previously identified QTL. Though a number of genetic correlations were identified between the phenotypic data sets, the only correlation of most interest was between DMD and starch digested (r = -0.382). The significance of this genetic correlation was that the NIRS data set identified a putative QTL on chromosomes 7H (LOD = 3.3) associated with starch digested. A QTL for DMD occurred in the same region of chromosome 7H, with flanking markers fAG/CAT63 and bPb-0758. The significant correlation and identification of this putative QTL, highlights the potential of technologies like NIRS in QTL analysis.

QTL associated with barley (Hordeum vulgare) feed quality traits measured through in situ digestion

Barley (Hordeum vulgare) is a major feed source for the intensive livestock industry. Competitiveness against other cereal grains depends largely on the price per unit of expressed feed quality. The traits which contribute to feed quality in barley are largely quantitative in nature but little is known about their genetic control. A study to identify the quantitative trait loci (QTLs) associated with feed quality was performed using a F6-derived recombinant inbred barley population. Samples from each line were incubated in the rumen of fistulated cattle, recovered, washed and dried for determination of in situ dry matter digestibility. Additionally, both pre- and post-digestion samples were analysed to quantify the content of key quality components relating to acid detergent fibre, total starch and protein. The data was used to identify trait-associated QTLs. Genetic analysis identified significant QTLs on chromosomes 2H, 5H and 7H. Genetic markers linked to these QTL should provide an effective tool for the selection and improvement of feed barley in the future.

Spirulina (Spirulina platensis) algae supplementation increases microbial protein production and feed intake and decreases retention time of digesta in the rumen of cattle

Cattle consuming pastures low in protein have low liveweight gain due to low rumen degradable protein (RDP) supply and thus low microbial crude protein (MCP) production and efficiency of MCP production [EMCP, g MCP/kg digestible organic matter (DOM)]. Nitrogen supplements can increase MCP production and EMCP of cattle grazing low protein pastures. The objective of this study was to compare the effects of supplementation with a non-protein-N source (NPN), in this case urea and ammonium sulfate (US), with a single-cell algal protein source (Spirulina platensis), on intake, microbial protein supply and digestibility in cattle. Nine cannulated Bos indicus steers [initial liveweight 250.1 ± 10.86 (s.d.) kg] were fed Mitchell grass hay (Astrebla spp; 6.1 g N, 746 g NDF/kg DM) ad libitum and were supplied with increasing amounts of US (0, 6, 13, 19 and 33 g US DM/kg hay DM) or Spirulina 0, 0.5, 1.4, 2.5 and 6.1 g Spirulina DM/kg W.day in an incomplete Latin square design. The response of MCP production and EMCP to increasing amounts of the two supplements was different, with a greater response to Spirulina evident. The MCP production was predicted to peak at 140 and 568 g MCP/day (0.64 and 2.02 g MCP/kg W.day) for the US and Spirulina supplements, respectively. The highest measured EMCP were 92 and 166 g MCP/kg DOM for the US and Spirulina treatments at 170 and 290 g RDP/kg DOM, respectively, or a Spirulina intake of 5.7 g DM/kg W.day. Increasing RDP intake from US and Spirulina resulted in an increase in Mitchell grass hay intake and rumen NH3-N concentration and reduced the retention time of liquid and particulate markers and digesta DM, NDF and lignin in the rumen with greater changes due to Spirulina. Total DM intake peaked at a Spirulina supplement level of 4.6 g Spirulina DM/kg W.day with a 2.3-fold higher DOM intake than Control steers. Rumen NH3-N concentrations reached 128 and 264 mg NH3-N/L for the US and Spirulina treatments with a significant increase in the concentration of branched-chain fatty acids for the Spirulina treatment. The minimum retention time of liquid (Cr-EDTA; 23 and 13 h) and particulate (Yb; 34 and 22 h) markers in the rumen were significantly lower for Spirulina compared with US and lower than unsupplemented animals at 24 and 34 h for Cr-EDTA and Yb, respectively. Spirulina could be provided safely at much higher N intakes than NPN supplements. The results suggest that, at an equivalent RDP supply, Spirulina provided greater increases than US in MCP production, EMCP and feed intake of Bos indicus cattle consuming low protein forage and could also be fed safely at higher levels of N intake.

Estimating daily methane production in individual cattle with irregular feed intake patterns from short-term methane emission measurements

Spot measurements of methane emission rate (n = 18 700) by 24 Angus steers fed mixed rations from GrowSafe feeders were made over 3- to 6-min periods by a GreenFeed emission monitoring (GEM) unit. The data were analysed to estimate daily methane production (DMP; g/day) and derived methane yield (MY; g/kg dry matter intake (DMI)). A one-compartment dose model of spot emission rate v. time since the preceding meal was compared with the models of Wood (1967) and Dijkstra et al. (1997) and the average of spot measures. Fitted values for DMP were calculated from the area under the curves. Two methods of relating methane and feed intakes were then studied: the classical calculation of MY as DMP/DMI (kg/day); and a novel method of estimating DMP from time and size of preceding meals using either the data for only the two meals preceding a spot measurement, or all meals for 3 days prior. Two approaches were also used to estimate DMP from spot measurements: fitting of splines on a 'per-animal per-day' basis and an alternate approach of modelling DMP after each feed event by least squares (using Solver), summing (for each animal) the contributions from each feed event by best-fitting a one-compartment model. Time since the preceding meal was of limited value in estimating DMP. Even when the meal sizes and time intervals between a spot measurement and all feeding events in the previous 72 h were assessed, only 16.9% of the variance in spot emission rate measured by GEM was explained by this feeding information. While using the preceding meal alone gave a biased (underestimate) of DMP, allowing for a longer feed history removed this bias. A power analysis taking into account the sources of variation in DMP indicated that to obtain an estimate of DMP with a 95% confidence interval within 5% of the observed 64 days mean of spot measures would require 40 animals measured over 45 days (two spot measurements per day) or 30 animals measured over 55 days. These numbers suggest that spot measurements could be made in association with feed efficiency tests made over 70 days. Spot measurements of enteric emissions can be used to define DMP but the number of animals and samples are larger than are needed when day-long measures are made.

Blank form of bond used by trustees of K.K.S.I. for house and lot on Mill Street (unsigned)

Digital image

Comparison of the impact of six heat-load management strategies on thermal responses and milk production of feed-pad and pasture fed dairy cows in a subtropical environment

Exposure to hot environments affects milk yield (MY) and milk composition of pasture and feed-pad fed dairy cows in subtropical regions. This study was undertaken during summer to compare MY and physiology of cows exposed to six heat-load management treatments. Seventy-eight Holstein-Friesian cows were blocked by season of calving, parity, milk yield, BW, and milk protein (%) and milk fat (%) measured in 2 weeks prior to the start of the study. Within blocks, cows were randomly allocated to one of the following treatments: open-sided iron roofed day pen adjacent to dairy (CID) + sprinklers (SP); CID only; non-shaded pen adjacent to dairy + SP (NSD + SP); open-sided shade cloth roofed day pen adjacent to dairy (SCD); NSD + sprinkler (sprinkler on for 45 min at 1100 h if mean respiration rate >80 breaths per minute (NSD + WSP)); open-sided shade cloth roofed structure over feed bunk in paddock + 1 km walk to and from the dairy (SCP + WLK). Sprinklers for CID + SP and NSD + SP cycled 2 min on, 12 min off when ambient temperature >26°C. The highest milk yields were in the CID + SP and CID treatments (23.9 L cow−1 day−1), intermediate for NSD + SP, SCD and SCP + WLK (22.4 L cow−1 day−1), and lowest for NSD + WSP (21.3 L cow−1 day−1) (P < 0.05). The highest (P < 0.05) feed intakes occurred in the CID + SP and CID treatments while intake was lowest (P < 0.05) for NSD + WSP and SCP + WLK. Weather data were collected on site at 10-min intervals, and from these, THI was calculated. Nonlinear regression modelling of MY × THI and heat-load management treatment demonstrated that cows in CID + SP showed no decline in MY out to a THI break point value of 83.2, whereas the pooled MY of the other treatments declined when THI >80.7. A combination of iron roof shade plus water sprinkling throughout the day provided the most effective control of heat load.