Packaging and storage studies of dried lizard fish

Packaging and storage studies of salted and dried lizard fish (Saurida sp.) have been conducted using different synthetic films like low density polyethylene (LDPE) of different gauges, high density polyethylene (HDPE) of 200 gauge, polyvinylidene chloride (PVDC) coated 400 MXXT cellophane, 100 gauge polypropylene (PP) and paper laminate of 100 gauge polythene. The films found most effective in the preliminary studies were subsequently used for packaging and storage of dried fish at atmospheric and lower temperature and humidity conditions for confirming their suitability under these conditions. Polyethylene films of higher gauges showed better results under both sets of conditions. PVDC coated cellophane film also performed satisfactorily under the latter conditions which under the former condition got easily attacked by insects. Lower temperature and humidity conditions in general enhanced the storage life of the dried product.

Shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions

A study was conducted on the shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions. Organoleptically dried products were found in good condition after a storage period of 60 days in ambient and chilled conditions. The moisture content, TVB-N value and bacterial load slightly increased during 60 days of storage in ambient and chilled conditions. The changes in moisture content and bacterial load were faster in ambient temperature than in chilled storage condition whereas changes in TVB-N value was higher in chilled condition than in ambient temperature. The initial moisture content was in the range of 13.71% to 22.84%. After 60 days of storage in ambient and chilled condition the moisture content of dried products was in the range of 15.09% to 25.11% and 14.49% to 25.01%, respectively. The initial TVB-N value was in the range of 10.64 to 17.52 mg/100g and after 60 days of storage in ambient and chilled condition, TVB-N value was in the range of 29.00 to 34.82 mg/100g and 31.41 to 39.11 mg/100g, respectively. The initial bacterial load was in the range of 1.91x10 super(8) to 2.84x10 super(8) and after 60 days of storage in ambient and chilled condition, the bacterial load was in the range of 6.2x10 super(8) to 1.8x10 super(9) and 5.75x10 super(7) to 5.05x10 super(8) CFU/g, respectively. The results of the present study indicated that it is necessary to store high quality dried products in sealed packed in chilled condition to ensure good quality up to a certain period of time.

Study on the sustainability of FPC produced from Kilka (Clupeonella engrauliformis, C. grimmi and C. cultriventris) in two vacuum packaging and modified atmosphere packaging at different environmental factors

Fish protein concentrate (FPC) is a healthy, sustainable and high nutritive product which sanitized produced from fishes in which, protein and other nutrients are more concentrated than in fresh fishes. The aim of this research is to study on the sustainability of FPC produced from Kilka (Clupeonella engrauliformis , C. grimmi and C. cultriventris) in two Vaccum Packaging and Modified Atmosphere Packaging at different environmental factors during six months. In our study the analysis of FPC protein showed 91.2%, lipid: 0.5%, ash: 3.6%, moisture: 2.3%, Total Volatile Nitrogen: 10 ml/100gr and peroxide: 5meq/kg. Amino acids and fatty acids were also determined. Bacteria and Fungi were lower than 1000 colony. Samples are kept in different condition of temperature (5, 20 and 35 degree centigrade), humidity (25, 40 and 90 percent) and light and dark environment in six month. Lipid rate in FPC after 6 months in VP and MAP (60% C02, 30 % N2 and 10% O2), packages was decreased but was not significant (P>0.05). It was also detected that increase temperature lead to more decrease in lipid content. Protein rate of FPC was decreased from 91.2% to 73.6% during six months at 35°C in VP Package and from 91.2% to 69.4% in MAP package. These changes were significant (P<0.05). TVN and PV rate in FPC after 6 months in VP and MAP packages was increased but was significant (P<0.05). Amino acids and fatty acids were also determined. But more changes in MAP packages was detected.

RinA controls phage-mediated packaging and transfer of virulence genes in gram-positive bacteria

Phage-mediated transfer of microbial genetic elements plays a crucial role in bacterial life style and evolution. In this study, we identify the RinA family of phage-encoded proteins as activators required for transcription of the late operon in a large group of temperate staphylococcal phages. RinA binds to a tightly regulated promoter region, situated upstream of the terS gene, that controls expression of the morphogenetic and lysis modules of the phage, activating their transcription. As expected, rinA deletion eliminated formation of functional phage particles and significantly decreased the transfer of phage and pathogenicity island encoded virulence factors. A genetic analysis of the late promoter region showed that a fragment of 272 bp contains both the promoter and the region necessary for activation by RinA. In addition, we demonstrated that RinA is the only phage-encoded protein required for the activation of this promoter region. This region was shown to be divergent among different phages. Consequently, phages with divergent promoter regions carried allelic variants of the RinA protein, which specifically recognize its own promoter sequence. Finally, most Gram-postive bacteria carry bacteriophages encoding RinA homologue proteins. Characterization of several of these proteins demonstrated that control by RinA of the phage-mediated packaging and transfer of virulence factor is a conserved mechanism regulating horizontal gene transfer.

Inference and Labeling of Metric-Induced Network Topologies

The development and deployment of distributed network-aware applications and services over the Internet require the ability to compile and maintain a model of the underlying network resources with respect to (one or more) characteristic properties of interest. To be manageable, such models must be compact, and must enable a representation of properties along temporal, spatial, and measurement resolution dimensions. In this paper, we propose a general framework for the construction of such metric-induced models using end-to-end measurements. We instantiate our approach using one such property, packet loss rates, and present an analytical framework for the characterization of Internet loss topologies. From the perspective of a server the loss topology is a logical tree rooted at the server with clients at its leaves, in which edges represent lossy paths between a pair of internal network nodes. We show how end-to-end unicast packet probing techniques could b e used to (1) infer a loss topology and (2) identify the loss rates of links in an existing loss topology. Correct, efficient inference of loss topology information enables new techniques for aggregate congestion control, QoS admission control, connection scheduling and mirror site selection. We report on simulation, implementation, and Internet deployment results that show the effectiveness of our approach and its robustness in terms of its accuracy and convergence over a wide range of network conditions.

Electronic packaging and reduction in modelling time using domain decomposition

The domain decomposition method is directed to electronic packaging simulation in this article. The objective is to address the entire simulation process chain, to alleviate user interactions where they are heavy to mechanization by component approach to streamline the model simulation process.

Multi-physics modelling for the fabrication, packaging and reliability of micro-systems components

The latest advances in multi-physics modelling both using high fidelity techniques and reduced order and behavioural models will be discussed. Particular focus will be given to the application and validation of these techniques for modelling the fabrication, packaging and subsequent reliability of micro-systems based components. The paper will discuss results from a number of research projects with particular emphasis on the techniques being developed in a major UK Goverment funded project - 3D-MINTEGRATION (www.3d-mintegration.com).

Do Total and High Density Lipoprotein Cholesterol and Triglycerides Act Independently in the Prediction of Ischemic Heart Disease? Ten-Year Follow-Up of Caerphilly and Speedwell Cohorts

Several studies have suggested that men with raised plasma triglycerides (TGs) in combination with adverse levels of other lipids may be at special risk of subsequent ischemic heart disease (IHD). We examined the independent and combined effects of plasma lipids at 10 years of follow-up. We measured fasting TGs, total cholesterol (TC), and high density lipoprotein cholesterol (HDLC) in 4362 men (aged 45 to 63 years) from 2 study populations and reexamined them at intervals during a 10-year follow-up. Major IHD events (death from IHD, clinical myocardial infarction, or ECG-defined myocardial infarction) were recorded. Five hundred thirty-three major IHD events occurred. All 3 lipids were strongly and independently predictive of IHD after 10 years of follow-up. Subjects were then divided into 27 groups (ie, 33) by the tertiles of TGs, TC, and HDLC. The number of events observed in each group was compared with that predicted by a logistic regression model, which included terms for the 3 lipids (without interactions) and potential confounding variables. The incidence of IHD was 22.6% in the group with the lipid risk factor combination with the highest expected risk (high TGs, high TC, and low HDLC) and 4.7% in the group with the lowest expected risk (P