Influence of pulse repetition rate on temperature rise and working time during composite filling removal with the Er : YAG laser

Objective: The purpose of this study was to assess the efficacy of Er:YAG laser energy for composite resin removal and the influence of pulse repetition rate on the thermal alterations occurring during laser ablation. Materials and Methods: Composite resin filling was placed in cavities (1.0 mm deep) prepared in bovine teeth and the specimens were randomly assigned to five groups according to the technique used for composite filling removal. In group I (controls), the restorations were removed using a high-speed diamond bur. In the other groups, the composite fillings were removed using an Er: YAG laser with different pulse repetition rates: group 2-2 Hz; group 3-4 Hz; group 4-6 Hz; and group 5-10 Hz. The time required for complete removal of the restorative material and the temperature changes were recorded. Results: Temperature rise during composite resin removal with the Er: YAG laser occurred in the substrate underneath the restoration and was directly proportional to the increase in pulse repetition rate. None of the groups had a temperature increase during composite filling removal of more than 5.6 degrees C, which is considered the critical point above which irreversible thermal damage to the pulp may result. Regarding the time for composite filling removal, all the laser-ablated groups (except for group 5 [10 Hz]) required more time than the control group for complete elimination of the material from the cavity walls. Conclusion: Under the tested conditions, Er: YAG laser irradiation was efficient for composite resin ablation and did not cause a temperature increase above the limit considered safe for the pulp. Among the tested pulse repetition rates, 6 Hz produced minimal temperature change compared to the control group (high-speed bur), and allowed composite filling removal within a time period that is acceptable for clinical conditions.

Low nanomolar concentration of mercury chloride increases vascular reactivity to phenylephrine and local angiotensin production in rats

Exposure to mercury at nanomolar level affects cardiac function but its effects on vascular reactivity have yet to be investigated. Pressor responses to phenylephrine (PHE) were investigated in perfused rat tail arteries before and after treatment with 6 nM HgCl2 during 1 h,,in the presence (E+) and absence (E-) of endothelium, after L-NAME (10(-4) M), indomethacin (10(-5) M), enalaprilate (1 mu M), tempol (1 mu M) and deferoxamine (300 mu M) treatments. HgCl2 increased sensitivity (pD(2)) without modifying the maximum response (Em) to PHE, but the pD(2) increase was abolished after endothelial damage. L-NAME treatment increased pD(2) and Emax. However, in the presence of HgCl2, this increase was smaller, and it did not modify Emax. After indomethacin treatment, the increase of pD(2) induced by HgCl2 was maintained. Enalaprilate, tempol and deferoxamine reversed the increase of pD(2) evoked by HgCl2. HgCl2 increased the angiotensin converting enzyme (ACE) activity explaining the result obtained with enalaprilate. Results suggest that at nanomolar concentrations HgCl2 increase the vascular reactivity to PHE. This response is endothelium mediated and involves the reduction of NO bioavailability and the action of reactive oxygen species. The local ACE participates in mercury actions and depends on the angiotensin 11 generation. (c) 2007 Elsevier Inc. All rights reserved.

pH Influence on the stability of foams with protein-polysaccharide complexes at their interfaces

Food foams such as marshmallow, Chantilly and mousses have behavior and stability directly connected with their microstructure, bubble size distribution and interfacial properties. A high interfacial tension inherent to air/liquid foams interfaces affects its stability, and thus it has a direct impact on processing, storage and product handling. In this work, the interactions of egg albumin with various types of polysaccharides were investigated by drop tensiometry, interfacial rheology and foam stability. The progressive addition of egg albumin and polysaccharide in water induced a drop of the air-water surface tension which was dependent on the pH and polysaccharide type. At pH 4, that is below the isoeletric point of egg albumen (pI = 4.5) the surface tension was decreased from 70 mN/m to 42 mN/m by the presence of the protein, and from 70 mN/m to 43 mN/m, 40 mN/m and 38 mN/m by subsequent addition of xanthan, guar gum and kappa-carrageenan, respectively. At pH 7.5 the surface tension was decreased from 70 mN/m to 43 mN/m by the simultaneous presence of the protein and kappa-carrageenan. However, a higher surface tension of 48 and 50 mN/m was found when xanthan and guar gum were added, respectively, when compared with carrageenan addition. The main role on the stabilization of protein-polysaccharide stabilized interfaces was identified on the elasticity of the interface. Foam stability experiments confirmed that egg-albumin/kappa-carrageenan at pH below the protein isoeletric point are the most efficient systems to stabilize air/water interfaces. These results clearly indicate that protein-polysaccharide coacervation at the air/water interface is an efficient process to increase foam stability. (C) 2009 Elsevier Ltd. All rights reserved.

EGG ALBUMIN AND GUAR GUM INFLUENCE ON FOAM THIXOTROPY

Food foams may be defined as products containing a gaseous phase stabilized in a matrix containing water and proteins. The rheology of a foam can be altered by how the air bubbles inside are organized, its size and shape, allowing a product that was initially fluid to be molded, like marshmallow. Rheology makes possible to understand how these properties are affected using dynamic oscillatory measurements to evaluate the behavior through G` and G `, and rotational to characterize the product through stress, and viscosity curves under controlled shear stress. These two methodologies combined are useful to analyze thixotropy. Nine formulations containing albumin and gelatin, and five others containing guar gum were evaluated by oscillatory rheology focusing thixotropy determination. Replacing gelatin by guar gum elasticity and thixotropy were increased, improving film stability around the air bubbles. It is possible to say that gelatin can be replaced by guar gum at concentrations of 0.4%, creating a product with a better ability of structure recovery. PRACTICAL APPLICATION This study indicated an important role of thixotropic analysis choice to understand the behavior of structure of products like foam. It was tested with three alternatives to get information about thixotropy of the products. It is very important for those who work with rheological analysis and products formulation.

Effect of prolonged erosive pH cycling on different restorative materials

This in vitro study evaluated the effect of a prolonged erosive pH cycling on the superficial microhardness change (SMHC) and the erosive wear of different restorative materials. Eighty enamel specimens with prepared cavities of 1.5 x 1.5 mm were randomly divided into eight groups according to the restorative materials used for the fillings (RMGI - resin-modified glass-ionomer, CGI - conventional glass-ionomer, CR- composite resin, A - amalgam) and immersion media used (ERO - erosive medium or SAL - artificial saliva). During 35 days, half of the specimens were immersed in a cola drink (ERO), for 5 min, three times a day, and they remained in SAL between the erosive cycles. The other half of the specimens was immersed in SAL only, for the entire experimental period (control). Data were tested for significant differences by anova and Tukey`s tests (P < 0.05). Scanning electron microscopy images were made to illustrate the enamel erosive wear and restorative materials alterations. The mean SMHC (%) and mean erosive wear (mu m) of the materials were: RMGI-ERO (30/0.5); CGI-ERO (37/0.5); CR-ERO (-0.3/0.3); A-ERO (-4/0.3); RMGI-SAL (4/0.4); CGI-SAL (-6/0.4); CR-SAL (-3/0.2) and A-SAL (2/0.4). Scanning electron microscopy images showed pronounced enamel erosive wear on groups submitted to erosive pH cycling when compared with groups maintained in saliva. In conclusion, the prolonged pH cycling promoted significantly higher alterations (SMHC and erosive wear) on the glass-ionomer cements than the CR and amalgam.

Physical Properties and Interfacial Adaptation of Three Epoxy Resin-based Sealers

Introduction: The aim of the study was to evaluate the radiopacity, solubility, flow, film thickness, setting time, and adaptation to the root canal walls of 3 epoxy resin based sealers: AH Plus, Acroseal, and Adseal. Methods: Physical tests were performed following American National Standards Institute/American Dental Association`s requirements. For interfacial adaptation analysis, 30 maxillary canines were shaped by using Pro Taper instruments. The specimens were divided into 3 groups (n = 10): group 1, AH Plus; group 2, Acroseal; and group 3, Adseal. The sealers were mixed with rhodamine B dye, and the canals were filled by using the lateral compaction technique. The percentage of gaps and voids area was calculated at 2, 4, and 6 mm levels from the apex. Statistical evaluation was performed by using analysis of variance for physical analysis and nonparametric Kruskal-Wallis and Dunn tests for interfacial adaptation (P<.05). Results: No statistical differences were found for adaptation, percentage of voids, solubility, flow, and film thickness among the sealers (P>.05). AH Plus was significantly more radiopaque (P<.05). For the setting time, there were statistical differences among all the studied sealers (P<.05). Conclusions: AH Plus, Acroseal, and Adseal presented similar root canal adaptation, solubility, flow, and film thickness. Statistical differences were found for radiopacity and setting time (P<.05). (J Endod 2011;37:1417-1421)

Heat Release, Time Required, and Cleaning Ability of Mtwo R and ProTaper Universal Retreatment Systems in the Removal of Filling Material

Introduction: This ex vivo study evaluated the heat release, time required, and cleaning efficacy of MTwo (VDW, Munich, Germany) and ProTaper Universal Retreatment systems (Dentsply/Maillefer, Ballaigues, Switzerland) and hand instrumentation in the removal of filling material. Methods: Sixty single-rooted human teeth with a single straight canal were obturated with gutta-percha and zinc oxide and eugenol-based cement and randomly allocated to 3 groups (n = 20). After 30-day storage at 37 degrees C and 100% humidity, the root fillings were removed using ProTaper UR, MTwo R, or hand files. Heat release, time required, and cleaning efficacy data were analyzed statistically (analysis of variance and the Tukey test, alpha = 0.05). Results: None of the techniques removed the root fillings completely. Filling material removal with ProTaper UR was faster but caused more heat release. Mtwo R produced less heat release than the other techniques but was the least efficient in removing gutta-percha/sealer. Conclusions: ProTaper UR and MTwo R caused the greatest and lowest temperature increase on root surface, respectively; regardless of the type of instrument, more heat was released in the cervical third. Pro Taper UR needed less time to remove fillings than MTwo R. All techniques left filling debris in the root canals. (I Endod 2010;36:1870-1873)

Composite filling removal with erbium:yttrium-aluminum-garnet laser: morphological analyses

Considering the increase in esthetic restorative materials and need for improvement in unsatisfactory restoration substitution with minimal inadvertent removal of healthy tissues, this study assessed the efficacy of erbium:yttrium-aluminum-garnet (Er:YAG) laser for composite resin removal and the influence of pulse repetition rate on the morphological analyses of the cavity by scanning electron microscope. Composite resin fillings were placed in cavities (1.0 mm deep) prepared in bovine teeth, and the 75 specimens were randomly assigned to five groups according to the technique used for composite filling removal (high-speed diamond bur, group I, as a control, and Er:YAG laser, 250 mJ output energy and 80 J/cm(2) energy density, using different pulse repetition rates: group II, 2 Hz; group III, 4 Hz; group IV, 6 Hz; group V, 10 Hz). After the removal, the specimens were split in the middle, and we analyzed the surrounding and deep walls to check for the presence of restorative material. The estimation was qualitative. The surfaces were examined with a scanning electron microscope. The results revealed that the experimental groups presented bigger amounts of remaining restorative material. The scanning electron microscopy (SEM) analyses showed irregularities of the resultant cavities of the experimental groups that increased proportionally with increase in repetition rate.

Electric-field-induced Mott insulating states in organic field-effect transistors

We consider the possibility that the electrons injected into organic field-effect transistors are strongly correlated. A single layer of acenes can be modeled by a Hubbard Hamiltonian similar to that used for the κ-(BEDT-TTF)2X family of organic superconductors. The injected electrons do not necessarily undergo a transition to a Mott insulator state as they would in bulk crystals when the system is half-filled. We calculate the fillings needed for obtaining insulating states in the framework of the slave-boson theory and in the limit of large Hubbard repulsion U. We also suggest that these Mott states are unstable above some critical interlayer coupling or long-range Coulomb interaction.

Vertébrés (crocodilians, poisons) du Miocène marin de l’Algarve occidentale

Karst fillings rich in fossils from carbonate series, Miocene in age, exposed on the coast of Algarve, yielded some thousands of teeth and other vertebrate remains. A crocodilian and more than fifty species of fishes (Selacians, Teleosteans) have been identified (see tableau 1). This fauna is consistent as a whole with a Burdigalian (maybe late) and/or Langhian age. It also indicates shallow waters, warmer than at present in the same region although not strictly tropical. This fauna shows more affinities with others of the same age from mediterranean region (i.e. Baleares) than with those from Lisbon.

Tradução com adaptação cultural para portugês e determinação da reprodutibilidade do questionnaire on respiratory symptoms in preschool children

RESUMO: Introdução: A asma brônquica é uma entidade frequente em idade pediátrica, apresentando uma grande heterogeneidade clínica e significativa morbilidade quando não controlada. A identificação de crianças sintomáticas pode atrasar ou até mesmo diminuir a ocorrência de algumas alterações estruturais. Reconhece-se a necessidade de questionários sobre sintomas respiratórios em língua portuguesa, devidamente validados, que tenham como população-alvo os grupos etários inferiores a 3 anos. Deste modo, será possível não só um conhecimento mais rigoroso da asma e da sibilância infantil mas também a uniformização de metodologias para o desenvolvimento de estratégias a nível nacional. Objetivos: Tradução com adaptação cultural para português e determinação da reprodutibilidade do Questionnaire on respiratory symptoms in preschool children de Strippoli e colaboradores. Material e métodos: A escolha do questionário obedeceu a vários critérios, entre os quais o grupo etário, o tipo e número de perguntas. O Questionnaire on respiratory symptoms in preschool children de Strippoli e colaboradores é um questionário de autopreenchimento, dirigido a crianças entre os 12 e os 24 meses de idade e destinado a estudos epidemiológicos ao nível da comunidade. Aborda aspetos referentes a sintomas respiratórios (sibilância, tosse crónica, sintomas das vias aéreas superiores), cuidados médicos, terapêutica, características ambientais, história familiar e situação social. Procedemos à sua tradução, com especial atenção para a adaptação do ponto de vista cultural e linguístico, utilizando o método da tradução / retroversão, amplamente utilizado e descrito na literatura internacional. Seguidamente determinámos a reprodutibilidade da versão final em língua portuguesa – Questionário de sintomas respiratórios em idade pré-escolar – utilizando o teste-reteste. Para tal, incluíram-se crianças entre os 12 e os 36 meses de idade recrutadas num Centro de Saúde e em creches de Lisboa. A distribuição dos questionários decorreu em duas fases: na primeira fase foram entregues pessoalmente nos locais de recrutamento e na segunda fase foram enviados por correio para os domicílios das crianças, respeitando-se um intervalo mínimo de 2 semanas entre ambos. Resultados: Na primeira fase foram distribuídos 180 questionários, com uma taxa de reposta de 41% (n=74). Na segunda fase enviaram-se para os respetivos domicílios 70 questionários,obtendo-se uma taxa de resposta de 66% (n=46). Para a análise de reprodutibilidade foram incluídos apenas os questionários preenchidos em ambos os momentos pelo mesmo indivíduo (mãe, pai ou representante legal) (n=41). A idade média das crianças foi, na primeira fase, de 22,5 meses e, na segunda fase, de 23,7 meses, com um predomínio do sexo feminino (F:M =1:0,6). A mediana do tempo decorrido entre os dois momentos de preenchimento dos questionários foi de 26 dias. Obtivemos valores de concordância globalmente bons a muito bons, à semelhança do sucedido no trabalho original. Conclusões: Procedemos à tradução e avaliação da reprodutibilidade do Questionnaire on respiratory symptoms in preschool children. Pretende-se que venha a ser uma ferramenta útil para estudos epidemiológicos e programas de rastreio na comunidade, contribuindo deste modo para uma otimização da abordagem da asma / sibilância infantil a nível nacional. -------------ABSTRACT: Background: Asthma is a very common feature in childhood, with important clinical heterogeneity and morbidity if not properly controlled. Identifying symptomatic children may delay or even reduce several structural changes. The development of questionnaires on respiratory symptoms in Portuguese for children under 3 years old will allow not only a more accurate knowledge of infantile asthma and recurrent wheezing but also the standardization of methodologies to develop nationwide strategies. Objectives: The aim of this study was to translate and adapt to the Portuguese culture and to determine the repeatability of the Questionnaire on respiratory symptoms in preschool children by Strippoli et al. Material and methods: The choice of the questionnaire took in consideration several criteria, among which the target age, the type and the number of questions. The Questionnaire on respiratory symptoms in preschool children by Strippoli et al is a parent-completed questionnaire for assessment of respiratory symptoms in 1 to 2-year-old children, developed for cross-sectional and longitudinal studies. It contains sections on respiratory symptoms (wheezing, chronic cough and upper airways symptoms), healthcare utilization, treatment, environmental exposure, family history and social situation. For the process of translation we used the method of translation and back-translation, with particular concern to cultural and linguistic adaptation. To assess the repeatability of the final Portuguese version - Questionário de sintomas respiratórios em idade pré-escolar - we used the test–retest analyses. The questionnaires were distributed to parents of children between 12 and 36 months old attending nurseries and a Primary Care Center of Lisbon. The distribution took place in two phases: the first questionnaires were delivered in person (phase one) and an identical questionnaire was posted to the families that participated in the first phase, 2 weeks after the first one was returned (phase two). Results: The response rates were 41% (180/74) in the first phase and 66% (70/46) in the second phase. For test–retest analyses, we included the 41 children with the same respondent (mother, father or legal representative) in both occasions. The median age of the children was 22,5 months at the first phase and 23,7 months at the second phase, with a predominance of girls (F:M = 1:0,6). The median time between the fillings of both questionnaires was 26 days. Globally, agreement values were good to excellent, similarly to the original work. Conclusion: In the present study we translated the Questionnaire on respiratory symptoms in preschool children and assessed its repeatability. Overall, we expect it to be a valuable tool for epidemiological studies and community-based screening programs, thus contributing to improve the management of infantile asthma / recurrent wheezing nationwide.

Dental Treatment Services Scheme (DTSS) - Service Utilisation and Treatment Need (Lot 9)

Dental Treatment Services Scheme (DTSS) – Service Utilisation and Treatment Need (Lot 9) Since 2002, following agreement between the Department of Health and Children and the GMS Payments Board, data from the DTSS payments database has been transferred routinely to the Oral Health Services Research Centre (OHSRC), in University College, Cork for analysis. Queries have been developed in the OHSRC to provide individual level data on the treatments provided to patients, such as examinations, extractions, fillings, scale and polish, removal/amputation of roots, root treatment (upper and lower anterior teeth), radiographs, partial dentures and full dentures, and also data on the characteristics of the dentist providing services. Click here to download PDF 2.4mb

Clinical performance of cervical restorations: a meta-analysis.

OBJECTIVES: To carry out a meta-analysis in order to assess the influencing factors on retention loss and marginal discoloration of cervical restorations made of composites and glass ionomer (derivates). METHODS: The literature was searched for prospective clinical studies on cervical restorations with an observation period of at least 18 months. RESULTS: Fifty clinical studies involving 40 adhesive systems matched the inclusion criteria. On average, 10% of the cervical fillings were lost and 24% exhibited marginal discoloration after 3 years. The variability ranged from 0% to 50% for retention loss and from 0% to 74% for marginal discoloration. Hardly any secondary caries was detected. When linear mixed models with a study and experiment effect were used, the analysis revealed that the adhesive/restorative class had the most significant influence, with 2-step self-etching adhesive systems performing best and 1-step self-etching adhesive systems performing worst; 3-step etch-and-rinse systems, glass ionomers/resin-modified glass ionomers, 2-step etch-and-rinse systems and polyacid-modified resin composites were ranked in between. Restorations placed in teeth whose dentin/enamel had been prepared/roughened showed a statistically significant higher retention rate than those placed in teeth with unprepared dentin (p<0.05). Beveling of the enamel and the type of isolation used (rubberdam/cotton rolls) had no significant influence. SIGNIFICANCE: The clinical performance of cervical restorations is significantly influenced by the type of adhesive system used and/or the adhesive class to which the system belonged and whether the dentin/enamel is prepared or not. 2-Step self-etching- and 3-step etch&rinse systems shall be chosen over 1-step self-etching systems and glass ionomer derivates. The dentin (and enamel) surface shall be roughened before placement of the restoration.

Strongly correlated states of ultracold rotating dipolar Fermi gases

We study strongly correlated ground and excited states of rotating quasi-2D Fermi gases constituted of a small number of dipole-dipole interacting particles with dipole moments polarized perpendicular to the plane of motion. As the number of atoms grows, the system enters an intermediate regime, where ground states are subject to a competition between distinct bulk-edge configurations. This effect obscures their description in terms of composite fermions and leads to the appearance of novel quasihole ground states. In the presence of dipolar interactions, the principal Laughlin state at filling upsilon=1/3 exhibits a substantial energy gap for neutral (total angular momentum conserving) excitations and is well-described as an incompressible Fermi liquid. Instead, at lower fillings, the ground state structure favors crystalline order.

Liberación de mercurio por parte de las obturaciones de amalgama dental: tipo, cantidad, método de determinación y posibles efectos adversos

Las obturaciones dentales de amalgama constituyen la fuente principal de exposición permanente de bajo nivel al vapor de mercurio (Hg°) y al mercurio inorgánico (Hg(II)) para la población general. La dosis de mercurio absorbido procedente de la amalgama es de 2.7 ¿g/día/persona para una cantidad promedio de 7.4 obturaciones. Si esta cantidad consistiera enteramente en mercurio inorgánico (Hg(II)), estaría muy por debajo de la cifra de 15 ¿g/día para una persona de 65 kg que la OMS considera como ingesta tolerable de mercurio inorgánico. En el caso de una exposición permanente a la misma cantidad, pero de vapor de mercurio (Hg0), se obtendría una concentración de 0.18 mg/m3 que puede compararse con la concentración de referencia de la EPA de 0.3 mg/m3 o con el nivel de riesgo mínimo de la ATSDR de 0.2 mg/m3. Varios estudios clínicos longitudinales y aleatorizados han evaluado la relación entre la concentración urinaria de mercurio y la exposición al mercurio procedente de las obturaciones dentales de amalgama en niños, particularmente vulnerables al Hg0, así como los posibles efectos neurológicos de tal exposición. La concentración promedio de mercurio en orina en los niños tratados con amalgama, con un promedio de 18,7 superficies obturadas, aumentó hasta un pico de 3.2 ¿g/L a los 2 años de iniciado el tratamiento y a los 7 años de seguimiento había descendido hasta los niveles basales y no se detectó ninguna alteración en las distintas exploraciones de monitorización neuropsicológica. De la misma manera, diversas investigaciones epidemiológicas no han aportado ninguna evidencia del papel de la amalgama en la posible causa o exacerbación de trastornos degenerativos como la esclerosis lateral amiotrófica, la enfermedad de Alzheimer, la esclerosis múltiple o el Parkinson. La extracción de las obturaciones de amalgama produce un aumento transitorio de los niveles de mercurio en sangre inmediatamente después de extraer las obturaciones de amalgama, pero de pequeña magnitud y que se normaliza a los 100 días, por lo que el efecto del dique de goma tiene una relevancia toxicológica menor. La conclusión de esta revisión es que la amalgama dental continúa siendo un excelente material de obturación.