Avaliação dos métodos de extração sequencial de Tessier, Keller e Miller na determinação de ferro nativo em três tipos de solos: orgânico, brunizem e latossolo

Sequential extraction is not totally effective to dissolve distinct forms of trace elements. The extractive solution, for example, can dissolve less of the target fraction and more than another not wished fraction. The goal of this work is to compare the extraction of native iron with three sequential extraction methods of the heavy metals, using three soils with different physical chemistry characteristics: a histosol, an oxisol, and a mollisol. The results obtained in this work demonstrate that a smaller relation soil/extractor results in a larger extraction in almost all phases. The use of many stages of the sequential extraction, with the purpose of more association of the metal with different components of the soil, can result, among other things, in modification of the substratum by the action of the reagents used, besides reducing the selectivity of the more specific extractors. Readsorption and redistribution of the heavy metals could have happened with larger intensity in the fraction where hidroxilamine was used with higher temperature. Sequential extraction of iron, without enrichment of soil samples, in the respective fractions in each method, it was important to better understand the behavior of the reagents considered specific to each form of the metal in soil.

Métodos de extração para quantificação de manganês disponível em fertilizantes

The solubility of Mn in different fertilizers (MnSO4.H2O-p.a., MnO2-p.a.+MnO-Ind., MnO2-Ind.+MnO-Ind., MnO2-p.a., MnO2-Ind. and MnO-Ind.) was determined using different methodologies: total content and soluble contents in water, 10% H2SO4, citric acid at 20 g L-1, diluted neutral ammonium citrate, (1+9) and DTPA at 0.005 mol L-1. The Mn solubilities in the latter three extractors were assessed after agitation of the sample for one hour and after boiling for 5 minutes. The extraction procedure using neutral ammonium citrate (1+9), at 1:100, with agitation for one hour, was shown to be the most adequate to assess the availability of Mn in fertilizers.

Fracionamento de metais pesados em solo contaminado antes e após cultivo de arroz

The objective of the present work was to evaluate the distribution of Cd, Cu, Mn, Pb and Zn among the different fractions of contaminated soil, before and after rice cultivation. Seven soil samples with different degrees of contamination were studied using a randomized experimental design, with four replicates. Using an ICP-OES we analyzed the contents of heavy metals in fractions of soil, the organic matter therein, the oxides and the residual content before and after rice cultivation. The largest concentrations of Cd, Cu, Mn and Zn in the soil are found in the fractions with stable chemical bonds.

Élaboration d'un corpus étalon pour l'évaluation d'extracteurs de termes

Ce travail porte sur la construction d’un corpus étalon pour l’évaluation automatisée des extracteurs de termes. Ces programmes informatiques, conçus pour extraire automatiquement les termes contenus dans un corpus, sont utilisés dans différentes applications, telles que la terminographie, la traduction, la recherche d’information, l’indexation, etc. Ainsi, leur évaluation doit être faite en fonction d’une application précise. Une façon d’évaluer les extracteurs consiste à annoter toutes les occurrences des termes dans un corpus, ce qui nécessite un protocole de repérage et de découpage des unités terminologiques. À notre connaissance, il n’existe pas de corpus annoté bien documenté pour l’évaluation des extracteurs. Ce travail vise à construire un tel corpus et à décrire les problèmes qui doivent être abordés pour y parvenir. Le corpus étalon que nous proposons est un corpus entièrement annoté, construit en fonction d’une application précise, à savoir la compilation d’un dictionnaire spécialisé de la mécanique automobile. Ce corpus rend compte de la variété des réalisations des termes en contexte. Les termes sont sélectionnés en fonction de critères précis liés à l’application, ainsi qu’à certaines propriétés formelles, linguistiques et conceptuelles des termes et des variantes terminologiques. Pour évaluer un extracteur au moyen de ce corpus, il suffit d’extraire toutes les unités terminologiques du corpus et de comparer, au moyen de métriques, cette liste à la sortie de l’extracteur. On peut aussi créer une liste de référence sur mesure en extrayant des sous-ensembles de termes en fonction de différents critères. Ce travail permet une évaluation automatique des extracteurs qui tient compte du rôle de l’application. Cette évaluation étant reproductible, elle peut servir non seulement à mesurer la qualité d’un extracteur, mais à comparer différents extracteurs et à améliorer les techniques d’extraction.

Unconstrained Handwritten Malayalam Character Recognition using Wavelet Transform and Support vector Machine Classifier

This paper presents the application of wavelet processing in the domain of handwritten character recognition. To attain high recognition rate, robust feature extractors and powerful classifiers that are invariant to degree of variability of human writing are needed. The proposed scheme consists of two stages: a feature extraction stage, which is based on Haar wavelet transform and a classification stage that uses support vector machine classifier. Experimental results show that the proposed method is effective

Soil Solution as Affected by Plant Residues and Nitrogen Rates

Cation mobility in acidic soils with low organic-matter contents depends not only on sorption intensity but also on the solubility of the species present in soil solution. In general, the following leaching gradient is observed: potassium (K+) magnesium (Mg2+) calcium (Ca2+) aluminum (Al3+). To minimize nutrient losses and ameliorate the subsoil, soil solution must be changed, favoring higher mobility of M2+ (metal ions) forms. This would be theoretically possible if plant residues were kept on the soil surface. An experiment was conducted in pots containing a Distroferric Red Latosol, with soil solution extractors installed at two depths. Pearl millet, black oat, and oilseed radish residues were laid on the soil surface, and nitrogen (as ammonium nitrate) was applied at rates ranging from 0 to 150mgkg-1. Corn was grown for 52 days. Except for K+ and ammonium (NH4 +), nitrogen rates and plant residues had little effect upon the concentrations and forms of the elements in the soil solution. Presence of cover crop residues on soil surface decreased the effect of nitrogen fertilizer on Ca leaching. More than 90% of the Ca2+, Mg2+, and K+ were found as free ions. The Al3+ was almost totally complexed as Al(OH3)0. Nitrogen application increased the concentrations of almost all the ions in soil solution, including Al3+, although there was no modification in the leaching gradient.

Boro disponível e resposta da soja em latossolo vermelho-amarelo do Mato Grosso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dinâmica de nutrientes na solução do solo em pomar fertirrigado de citros

O objetivo deste trabalho foi avaliar a dinâmica de nutrientes na solução do solo após a aplicação, via fertirrigação, de nitrogênio, fósforo e potássio a laranjeiras. O experimento foi realizado entre setembro de 2007 e outubro de 2009, em pomares de laranjeiras 'Valência' e 'Hamlin', enxertadas sobre citrumeleiro 'Swingle'. Foram avaliadas cinco doses de N, P2O5 e K2O (0, 25, 50, 100 e 200% da dose recomendada). A solução do solo foi extraída a 30 e 60 cm de profundidade, com o auxílio de extratores com cápsulas porosas. Foram realizadas 11 avaliações durante o período experimental, com as extrações iniciadas após 12 horas das fertirrigações. O aumento das doses reduziu o pH (pH~3,5, na maior dose), e aumentou a condutividade elétrica (CE~1,5 dS m-1, na maior dose) e os teores de NH4, NO3, P, K, Mn e Zn na solução do solo, nas duas profundidades amostradas. Nos meses com maior precipitação pluvial, houve perda potencial de nutrientes por lixiviação, pois maiores concentrações de NO3, K e B foram observadas à profundidade de 60 cm. A análise da solução do solo, obtida por extratores com cápsula de cerâmica porosa, pode ser considerada ferramenta auxiliar para monitorar e avaliar a disponibilidade de nutrientes às plantas.

Medicinal plants popularly used in the Brazilian Tropical Atlantic Forest

A survey of medicinal plants used by rural and urban inhabitants of the three cities of the Tropical Atlantic Forest, Region of Vale do Ribeira, State of São Paulo, Brazil was performed by means of 200 interviews with medicinal plant users and extractors and, traditional healers. One hundred fourteen herbal remedies were recorded and the following information reported: Latin, vernacular and English names, plant part used, forms of preparation and application of the herbal remedies, medicinal or food uses, areas of plant collection, economic importance (when available) and other data. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Comparação de extratores de fósforo do solo, considerando-se o tempo de incorporação de fontes de adubos fosfatados

No período de 1978 a 1983 efetuou-se um experimento comparando-se extratores de fósforo quando amostras foram coletadas em diferentes períodos após a aplicação de superfosfato triplo, termofosfato-Mg e fosfato de Araxá. Os fertilizantes foram aplicados a lanço no solo nas doses de 0 - 145 - 290 - 435 - 580 kg/ha de P2O5 total e incorporados com grade pesada. A cada 120 dias, num período de 48 meses, de cada parcela foi retirada uma amostra composta, constituída de 15 amostras simples, as quais foram submetidas a extração de fósforo pelos métodos: IAC (H2SO4 0,05N), Bray-l e Olsen. Os resultados evidenciam que na incorporação do superfosfato triplo e termofosfato-Mg os três extratores foram eficientes em recuperar o fósforo. Na incorporação do fosfato de Araxá, o método Bray-l foi o que apresentou melhor comportamento na extração de fósforo. 0 método de Olsen foi o mais estável na recuperação do P do solo, em função do tempo de incorporação para as fontes superfosfato triplo e termofosfato-Mg. Para a fonte fosfato de Araxá os métodos Bray-l e de Olsen foram os mais estáveis. A partir da amostragem 960dias após a incorporação do fosfato de Araxá os três métodos tenderam a se igualar na extração de fósforo.

Manganês no solo, sua avaliação e toxidez de manganês em soja

Two experiments were carried out in pots with a Dusky Latossol showing a 15% base saturation. In the first experiment dolomitic limestone was applied to reach 45, 60, 75 and 90% of base saturation. In the second, MnSO4 was applied in rates of 30, 60, 90 and 120 ppm,and base saturation was raised to 70%.Soybean plants cv. IAC-9 were grown up to R6, when dry matter production and manganese accumulation were evaluated. Soybean responded to liming up to 60% base saturation, as Mn availability and evantualy Mn absorption were decreased to non-toxic levels. Mn applied to a reclamed soil up to 120 ppm was not enough to cause toxicity to soybean cv IAC-9. All of the chemical extractors (Ammonium Acetate, DTA, Mehlich and H2SO4) showed modification in Mn availabity in soil but were not definitely related to Mn absorption and dry matter production.

Concentração de sais da soluçtiao avaliada pela condutividade elétrica na zona radicular do crisântema sob irrigação por gotejamento

The effects of salt concentration levels in electrical conductivity (EC) were evaluated in chrysanthemum root, cultivated in substrate using two sampling methods, under greenhouse conditions. The experiment was carried out in Paranapanema, São Paulo using the experimental design in randomized blocks and four replications. The treatments consisted of eight sampling periods of substrate solutions in pots: 7, 14, 21, 28, 35, 42, 49 and 56 days after strike root and five salt concentration levels of applied saline solution: 1.42; 1.65; 1.89; 2.13 and 2.36 dS m -1 in the vegetative period and during the reproduction period of flower budding: 1.71; 1.97; 2.28; 2.57 and 2.85 dS m -1. The substrate solution EC monitoring was done using two methods: solution extractors and 1:2 water diluted solution. The use of solution extractors and 1:2 water diluted solution allowed substrate solution EC monitoring along the culture cycle; the amount of salt concentration applied in the substrate caused the substrate salinity increase; the method using solution extractors presented higher EC values in the substrate.

Heavy metals availability and fractions in soil amended with biosolid composts

The heavy metals when linked to organic matter have a behavior in the soil that is still little known. This study aimed to evaluate the effect of sewage-sludge-based composts when incorporated in the soil, in relation to heavy metals availability. Five composts were incorporated using sugar-cane bagasse, sewage sludge and cattle manure in the respective proportions: 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 and 0-100-0 (composts with 0, 12.5, 25, 50 and 100% sewage sludge). The experiment consisted of 6 treatments (5 composts and a control with mineral fertilization) in randomized blocks with a split-plot design. The control and the treatment of 0% sewage sludge received inorganic nitrogen (N). All the treatments received the same amount of N (8.33 g) K (5.80 g) and K (8.11 g) per pot. Tomato plants were cultivated in 24.0 L pots in a greenhouse in Jaboticabal, SP, Brazil. The concentrations of heavy metals were determined in the soil samples at day 0 after compost incorporation. The higher the sewage sludge doses, the higher heavy metal contents in the soil. Among extractants, Melhlich-1 extracted the highest amount of heavy metals, while DTPA extracted the lowest one. The residual fraction presented the highest heavy metal content, followed by Fe oxides crystalline and amorphous to Cu, Cr and Mn, and Mn oxides, and Fe amorphous to Zn, indicating strong associations to oxides and clays. There were significant positive correlations between Mn contents in the plant and Mn linked to Fe oxide amorphous and crystalline.

Posicionamento de Extratores de Cápsula Porosa em Solo Arenoso Na Citricultura Fertirrigada Por Gotejamento

The efficiency of monitoring fertigation by means of porous capsule extractors is directly related to its correct placement, since the nutrients applied through fertigation have different mobility throughout the soil profile. The objective of this study was to evaluate the distributions of NO3, P, and K in the soil solution, when applied in citrus in sandy soil through drip fertigation systems, aiming to define the proper placement of the solution extractors. In order to measure the concentration of ions in the soil solution, the extractors were installed at four different distances (5, 15, 25, and 35 cm) and depths (15, 30, 60, and 90 cm) with an emitter located under the projection of the tree canopy. The experiment was conducted in a Valencia orange orchard on citrumelo Swingle rootstock, in Reginópolis/SP. The experimental design was randomized blocks and the treatment arrangement was a 4 x 4 factorial design with five repetitions. Sixteen soil solution extractors were installed per block, with a total of 80 extractors in the experiment. According to the obtained results, to determine P and K, it is recommended to install the solution extractor at 15 cm horizontal and 30 cm depth from the emitter. For NO3, the extractor recommended placement is 25 cm horizontal and 30 cm depth. The soil solution extractor proved to be a sensitive tool, capable of determining the ions mobility in the wet bulb.

Disponibilidade de fósforo em função da aplicação de calcário e silicatos em solos oxídicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)