MULTIPLICAÇÃO E ALONGAMENTO IN VITRO DE CLONES HÍBRIDOS DE Eucalyptus globulus

Os híbridos de Eucalyptus globulus representam uma excelente alternativa para o setor de celulose e papel, em razão dos ganhos em qualidade da madeira para a fabricação de celulose. Entretanto, estes híbridos têm apresentado recalcitrância ao enraizamento adventício. Assim, a micropropagação é apontada como a técnica para o rejuvenescimento desses híbridos adultos, viabilizando a propagação clonal dos mesmos. O presente trabalho avaliou o cultivo in vitro de três clones de Eucalyptus grandis x Eucalyptus globulus e de três clones de Eucalyptus urophylla x Eucalyptus globulus, em relação à multiplicação in vitro, no meio MS suplementado com 0,5 mg L-1 de BAP e 0,01 mg L-1 de ANA, bem como o efeito das concentrações de 0,25; 0,50; 0,75 e 1,0 mg L-1 de AIB e dos meios de cultura MS e JADS no alongamento in vitro das brotações. Os clones diferiram quanto à multiplicação in vitro das brotações e apresentaram uma taxa de multiplicação média dos clones de 3,0 tufos de brotações em cada subcultivo, ao longo dos 25 subcultivos realizados. No alongamento in vitro, os clones diferiram quanto às concentrações de AIB adequadas para provocar o alongamento, bem como em relação aos meios de cultura MS e JADS. O intervalo médio entre 0,40 e 0,80 mg L-1 de AIB proporcionou o maior número e comprimento das brotações alongadas in vitro e com maior vigor.

Antimicrobial potential of Eucalyptus globulus against biofilms of Staphylococcus aureus isolated from bovine mastitis

Staphylococcus aureus are among the most common species isolated from bovine mastitis. The pathogenesis of this bacterium is facilitated by a number of virulence factors, including the ability to adhere to abiotic surfaces and/or host tissues often leading to biofilms' formation. From the clinical perspective, the most important feature of Staphytococcus species' biofilms is their high tolerance to the conventional antimicrobial therapy. So, the increasing number of bovine mastitis and the higher levels of Staphylococcus species resistance to traditional antimicrobial agents are considered an important alert for the necessity to focus the future research on identification and development of new strategies to combat S. aureus mastitis. RecenUy, the interest in natural alternatives based on plant extracts has been rising. In add~ion to their health benefits, their antimicrobial potential has been increasingly reported. Taking this into consideration, the evaluation of hydromethanolic extracts of E. globulus against S. aureus biofilms was tested and compared with penicillin, one of the antibiotics most often used in the treatment of cattle infections. All mastitis' isolates tested were good-biofilm producers. As expected penicillin has demonstrated poor activity against S. aureus biofilms (<1 log reduction). However, E. globulus Labill was bactericidal, promoting a biofilm cell reduction of 2-3 log. Therefore, the present work showed the potential antimicrobial activity of E. g/obulus against S. aureus from bovine mastitis, namely in biofilm mode of growth and drew attention to its promising use as an alternative to penicillin.

Efeito da aplicação de diferentes pré-tratamentos na gasificação de cepos de Eucalyptus globulus. Densificação, torrefação e torrefação combinada com densificação

Mestrado em Engenharia Florestal e dos Recursos Naturais - Instituto Superior de Agronomia - UL

Studies on the eucalyptus leaf disease complex in Portugal

Native from south eastern Australia, Eucalyptus globulus is the main species in eucalypts plantations in Portugal. The most serious foliar disease in eucalypt plantations is linked to Mycosphaerella senso lato, which affects young trees in the juvenile phase foliage causing leaf necrosis. This disease results in reduced growth rate of the host and lower wood volume, thus causing significant productivity losses. The most common name for this disease was Mycosphaerella Leaf Disease that became inappropriate when most of the pathogens on eucalypts were re-distributed into several genera. The term "Eucalyptus Leaf Disease Complex" is now more appropriate. The overall aim of this thesis was to investigate the Eucalyptus Leaf Disease Complex in Portugal, focusing on species diversity, taxonomy and the role played by each species in the disease complex on Eucalyptus globulus. Literature on the Eucalyptus Leaf Disease Complex was reviewed and the species were distributed into several genera. A survey based on symptomatic leaves collected from several Eucalyptus globulus plantations and characterized by morphological and molecular tools provided an overview of species incidence and of the most frequent species in the disease complex. The present work reveals additional species of Mycosphaerella senso lato associated with eucalypt plantations in Portugal. Thus, five new records of Teratosphaeria and phylogenetically related species were added to the Iberian Peninsula, namely, Neodevriesia hilliana, for the first time on Myrtaceae; Quasiteratosphaeria mexicana, Teratosphaericola pseudoafricana, Teratosphaeria pluritubularis and Teratosphaeria lusitanica, a new species. Furthermore, new anamorphic structures were found and two new combinations were made. Regarding other genera, some species were observed for the first time, such as Cladosporium cladosporioides, Fusicladium eucalypti, Mycosphaerella madeirae, in the mainland. In addition to leave diseases, Teratosphaeria gauchensis was found causing a severe stem and trunk canker on Eucalyptus globulus. The aggressiveness of several species was compared to evaluate each species individually in the complex, permitting to distinguish different behaviours, from primary to secondary pathogens. Cladosporium cladosporioides, M. communis and M. lateralis, appeared to be more aggressive than Teratosphaeria nubilosa. In fact, contrary to the prevailing views on this disease complex, Teratosphaeria nubilosa is not the only species responsible for the disease, which clearly involves a complex of species acting together.

Valorization of eucalyptus wood by glycerol-organosolv pretreatment within the biorefinery concept: an integrated and intensified approach

The efficient utilization of lignocellulosic biomass and the reduction of production cost are mandatory to attain a cost-effective lignocellulose-to-ethanol process. The selection of suitable pretreatment that allows an effective fractionation of biomass and the use of pretreated material at high-solid loadings on saccharification and fermentation (SSF) processes are considered promising strategies for that purpose. Eucalyptus globulus wood was fractionated by organosolv process at 200 C for 69 min using 56% of glycerol-water. A 99% of cellulose remained in pretreated biomass and 65% of lignin was solubilized. Precipitated lignin was characterized for chemical composition and thermal behavior, showing similar features to commercial lignin. In order to produce lignocellulosic ethanol at high-gravity, a full factory design was carried to assess the liquid to solid ratio (3e9 g/g) and enzyme to solid ratio (8e16 FPU/g) on SSF of delignified Eucalyptus. High ethanol concentration (94 g/L) corresponding to 77% of conversion at 16FPU/g and LSR ¼ 3 g/g using an industrial and thermotolerant Saccharomyces cerevisiae strain was successfully produced from pretreated biomass. Process integration of a suitable pretreatment, which allows for whole biomass valorization, with intensified saccharification-fermentation stages was shown to be feasible strategy for the co-production of high ethanol titers, oligosaccharides and lignin paving the way for cost-effective Eucalyptus biorefinery.

Basic density and pulp yield relationship with some chemical parameters in eucalyptus trees

The objective of this work was to evaluate the use of basic density and pulp yield correlations with some chemical parameters, in order to differentiate an homogeneous eucalyptus tree population, in terms of its potential for pulp production or some other technological applications. Basic density and kraft pulp yield were determined for 120 Eucalyptus globulus trees, and the values were plotted as frequency distributions. Homogenized samples from the first and fourth density quartiles and first and fourth yield quartiles were submitted to total phenols, total sugars and methoxyl group analysis. Syringyl/guaiacyl (S/G) and syringaldehyde/vanillin (S/V) ratios were determined on the kraft lignins from wood of the same quartiles. The results show the similarity between samples from high density and low yield quartiles, both with lower S/G (3.88-4.12) and S/V (3.99-4.09) ratios and higher total phenols (13.3-14.3 g gallic acid kg-1 ). Woods from the high yield quartile are statistically distinguished from all the others because of their higher S/G (5.15) and S/V (4.98) ratios and lower total phenols (8.7 g gallic acid kg-1 ). Methoxyl group and total sugars parameters are more adequate to distinguish wood samples with lower density.

Pathogenicity evaluation of Cytospora eucalypticola isolated from Eucalyptus spp: cankers in Uruguay

Cytospora eucalypticola has been frequently associated with twig and stem cankers and as endophyte of Eucalyptus globulus and E. grandis in Uruguay. Mycelium discs of two C. eucalypticola isolates obtained from actively growing colonies were inoculated, both superficially and on experimentally wounded stems of E. globulus and E. grandis. No inoculated and control plants have shown any discoloration, gumosis or necrosis nor did they display lesions ten months after inoculation. Callus tissue was formed, partially or wholly occluding the wounds. The ability to penetrate healthy tissues and the inability to produce lesions evidenced that the presence of C. eucalypticola in twig and stem cankers could result from saprotrophic expansion of the endophytic mycelium in dying tissues, cankers probably being produced by different environmental stress conditions.

Determination of disease biomarkers in Eucalyptus by comprehensive two-dimensional gas chromatography and multivariate data analysis

In this paper is reported the use of the chromatographic profiles of volatiles to determine disease markers in plants - in this case, leaves of Eucalyptus globulus contaminated by the necrotroph fungus Teratosphaeria nubilosa. The volatile fraction was isolated by headspace solid phase microextraction (HS-SPME) and analyzed by comprehensive two-dimensional gas chromatography-fast quadrupole mass spectrometry (GC. ×. GC-qMS). For the correlation between the metabolic profile described by the chromatograms and the presence of the infection, unfolded-partial least squares discriminant analysis (U-PLS-DA) with orthogonal signal correction (OSC) were employed. The proposed method was checked to be independent of factors such as the age of the harvested plants. The manipulation of the mathematical model obtained also resulted in graphic representations similar to real chromatograms, which allowed the tentative identification of more than 40 compounds potentially useful as disease biomarkers for this plant/pathogen pair. The proposed methodology can be considered as highly reliable, since the diagnosis is based on the whole chromatographic profile rather than in the detection of a single analyte. © 2013 Elsevier B.V..

Partitioning of net primary production in Eucalyptus and Acacia stands and in mixed-species plantations: Two case-studies in contrasting tropical environments

The introduction of nitrogen fixing species (NFS) in fast-growing tree plantations is an alternative option to reduce fertilizer inputs. However, the success of mixed-species plantations depends on the balance between positive interactions among species (resulting from facilitation and/or complementarity) and the negative effects of interspecific competition.Using a carbon budget approach and coupling measurements of standing biomass, aboveground litterfall and soil CO2 efflux, we assessed the influence of replacing half of eucalypt trees by Acacia mangium on total belowground carbon flux (TBCF), net primary production (NPP) and its partitioning between above- and belowground growth at two tropical sites in Brazil (Itatinga) and in Congo (Kissoko) exhibiting contrasting climates, edaphic conditions and wood productions.Annual soil CO2 efflux (FS) was significantly lower in the acacia monocultures than in eucalypt monocultures and mixed-species stands at both sites. Annual FS was significantly lower at Itatinga compared to Kissoko for all stands while TBCF was significantly lower in the eucalypt stands only. In the eucalypt monocultures we found a significantly lower aboveground NPP (ANPP) and wood production (wood NPP) at Kissoko compared to Itatinga that was almost fully balanced by a significantly higher belowground NPP (BNPP), leading to similar NPP. Similarly, acacia monocultures exhibited significantly higher ANPP and wood NPP at Itatinga than at Kissoko. The mixed-species stands exhibited a significantly lower wood NPP and ANPP than the eucalypt monocultures at the Brazilian site while NPP of the mixture was not significantly different than the average NPP of the two monocultures. At the Congolese site, NPP of the mixture was significantly higher than the average NPP of the two monocultures. NPP was similar in the mixed-species stand and the eucalypt monoculture with a significantly lower partitioning of NPP to belowground production, leading to a one third higher wood biomass at harvest in the mixed-species stand.A positive effect of growing eucalypts with the nitrogen fixing acacia trees on stand wood production occurred at Kissoko but not at Itatinga. Mixed-species plantations with NFS can be advocated at sites where the productive gains resulting from nitrogen fixation are not compromised by other resource limitations. © 2012 Elsevier B.V.

Metabolic profiling by ultra-performance liquid chromatography-mass spectrometry and parallel factor analysis for the determination of disease biomarkers in Eucalyptus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Forest resources in Graciosa Island (Azores) : biomass availability for sustainable energetic use

Dissertação de Mestrado em Ambiente, Saúde e Segurança.

Otimização da extração sólido-líquido de antioxidantes de subprodutos florestais pelo método de superfície de resposta

Portugal continental apresenta uma vasta área florestal, que representa cerca de 35,4% da ocupação total do solo, com predominância de espécies como o eucalipto (Eucalyptus globulus) e o pinheiro-bravo (Pinus pinaster). Estas espécies apresentam uma elevada importância a nível económico, designadamente devido à sua ampla utilização, nomeadamente na indústria de celulose e papel, gerando elevadas quantidades de resíduos. Este resíduo de biomassa florestal é utilizado, na sua totalidade, para a geração de energia, na forma de eletricidade ou aquecimento. No entanto, existem outras opções viáveis, a nível económico, tais como a valorização destes subprodutos como fonte de compostos polifenólicos tornando-os, assim, um produto de valor acrescentado. A extração de compostos fenólicos de subprodutos florestais, como folhas de eucalipto e agulhas de pinheiros tem vindo a aumentar devido, principalmente, à substituição de antioxidantes sintéticos, contribuindo para a valorização de subprodutos florestais. Contudo, apesar de todas as potenciais aplicações e vantagens, apenas algumas centenas de espécies aromáticas identificadas são utilizadas à escala comercial. Neste trabalho foi avaliada a capacidade antioxidante de subprodutos da floresta, otimizando as condições de extração através do estudo dos fatores: tempo de extração, temperatura e composição de solvente através do método de superfície de resposta. O planeamento experimental utilizado teve como base um planeamento de compósito central e a avaliação do perfil de antioxidantes das matrizes analisadas foi realizada através de métodos de quantificação total, como o teor fenólico total, a atividade anti-radicalar – método do DPPH (radical 2,2-difenil-1-picrilhidrazilo) e o método de FRAP. Estes métodos analíticos convencionais foram modificados e, devidamente validados, para a análise em leitor de microplacas. Verificou-se que os extratos de pinheiro e de eucalipto, tanto as amostras verdes com as amostras, apresentam uma promissora capacidade antioxidante. O planeamento fatorial aplicado permitiu otimizar as condições de extração em relação às matrizes verdes. Contudo, o mesmo não se verificou em relação às matrizes secas. A composição (% de água) é sem dúvida o fator com mais efeito em todas as amostras (coeficientes de primeira e segunda ordem no modelo). Também a temperatura foi identificada como um fator com efeito significativo sobre os sistemas em análise.

Fluência de materiais

A presente dissertação apresenta uma abordagem ao tema Fluência, com um desenvolvimento geral para quatro materiais: madeira, alumínio, betão e aço. No entanto, particularizou-se este estudo apenas para dois destes materiais, a madeira e o alumínio. A madeira é um material viscoelástico, logo fortemente influenciado quando submetido a uma ação constante (Fluência) sendo agravada com alterações do teor em água. Iniciou-se o estudo, com uma introdução aos objetivos principais e a revisão teórica do conhecimento da propriedade mecânica (Fluência). Efetuou-se o estudo inicial para os quatro materiais indicados. Posteriormente, fez-se avaliação do efeito mecânico sortivo durante 60 dias com sete ciclos, em provetes de dimensões 20 x 20 x 400 mm3 (escala 1:10) de madeira de Eucalyptus globulus Labill. Recorrendo ao levantamento de um conjunto de modelos numéricos, procedeu-se ao ajuste e extrapolação do comportamento, em Fluência, para distintos períodos de tempo (1, 10 e 50 anos). Os resultados obtidos demonstraram que a madeira de Eucalipto não apresenta um limite no seu comportamento em Fluência, logo instável para os 60 dias de duração de ensaio. Os diferentes modelos de Fluência (x6) apresentaram uma variabilidade crescente de resultados, de acordo com o aumento de extrapolação dos resultados. Para a espécie de madeira de Eucalipto constatou-se ainda, que o ajuste e extrapolação de deformação para 50 anos ultrapassaram os valores sugeridos pelo Eurocódigo 5. A última parte deste trabalho, incidiu sobre o desenvolvimento da metodologia do ensaio em flexão de 3 provetes de alumínio similares, cujas dimensões eram de 20 x 20 x 400mm3. O objetivo desta metodologia foi avaliar o seu comportamento em Fluência. Numa primeira fase, foi aplicada uma carga contante de 160 kN. E numa segunda fase, foi aplicada o dobro dessa carga sujeita adicionalmente a uma temperatura bastante superior à temperatura ambiente (a rondar os 50 oC). Conclusivamente verificou-se que o alumínio não apresenta deformação por Fluência, para as condições de ensaio apresentadas.

Análise termodinâmica de uma central de biomassa lenhosa

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Identificação de alterações de ocupação do solo com imagens de satélite para atualização de inventários florestais

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica