Influência da densidade básica da madeira de clones de Eucalyptus grandis x Eucalyptus urophylla na qualidade da polpa branqueada.

The study analyzed the wood basic density effect in two Eucalyptus grandis x Eucalyptus urophylla hybrid clones (440 kg/m(3) e 508 kg/m(3)) on bleached pulp quality (fiber dimensions and physical-mechanical properties). The woods performance on pulping, bleaching and beating results were analyzed. The Kraft pulping was carried out in forced circulation digester in order to obtain 17 +/- 1 kappa number targets. The pulps were bleached to 90 +/- 1 using delignification oxygen and D0EOPD1 bleaching sequence. Bleached pulp of low basic density clone showed, significantly, lowest revolutions number in the PFI mill to reach tensile index of 70 N.m/g, low Schopper Riegler degree and generated sheets with higher values to bulk and opacity. These characteristics and properties allow concluding that bleached pulp of low basic density clone was the most indicated to produce printing and writing sheets. The bleached pulp of high basic density clone showed higher values of bulk and capillarity Klemm and lower water retention value when analyzed without beating. The bleached pulp of high basic density clone showed more favorable characteristics to the production of tissue papers.

Fine root isotropy in Eucalyptus grandis plantations. Towards the prediction of root length densities from root counts on trench walls

The objectives of the study were to assess changes in fine root anisotropy and specific root lengths throughout the development of Eucalyptus grandis ( W. Hill ex Maiden) plantations and to establish a predictive model of root length density (RLD) from root intercept counts on trench walls. Fine root densities (<1 mm in diameter) were studied in 6-, 12-, 22-, 28-, 54-, 68- and 72-month-old E. grandis plantations established on deep Ferralsols in southern Brazil. Fine root intercepts were counted on 3 faces of 90-198 soil cubes (1 dm(3) in volume) in each stand and fine root lengths (L) were measured inside 576 soil cubes, sampled between the depths of 10 cm and 290 cm. The number of fine root intercepts was counted on one vertical face perpendicular to the planting row (N(t)), one vertical face parallel to the planting row (N(l)) and one horizontal face (N(h)), for each soil cube sampled. An overall isotropy of fine roots was shown by paired Student's t-tests between the numbers of fine roots intersecting each face of soil cubes at most stand ages and soil depths. Specific root lengths decreased with stand age in the upper soil layers and tended to increase in deep soil layers at the end of the rotation. A linear regression established between N(t) and L for all the soil cubes sampled accounted for 36% of the variability of L. Such a regression computed for mean Nt and L values at each sampling depth and stand age explained only 55% of the variability, as a result of large differences in the relationship between L and Nt depending on stand productivity. The equation RLD=1.89*LAI*N(t), where LAI was the stand leaf area index (m(2) m(-2)) and Nt was expressed as the number of root intercepts per cm(2), made it possible to predict accurately (R(2)=0.84) and without bias the mean RLDs (cm cm(-3)) per depth in each stand, for the whole data set of 576 soil cubes sampled between 2 years of age and the end of the rotation.

Composição do substrato sobre o desenvolvimento, qualidade e custo de produção de mudas de Eucalyptus grandis Hill ex Maiden x Eucalyptus urophylla S. T. Blake

The components used in the production of substrates influence directly the growth cycle, quality and consequently the cost of production of seedlings. In this experiment we studied the development, quality and cost of Eucalyptus grandis Hill ex Maiden x E. urophylla S. T. Blake, through sexual propagation using 12 compositions of substrate. The results showed that the pure substrates, with the exception of coconut fiber, did not present physical characteristics appropriate for the production from seedlings of eucalyptus in container, with the best results obtained for the substrates with a mixture 1:1 of carbonized rid of rice and coconut-fiber and a mixture 1:1 of vermiculite and coconut fiber, due to the best morphological characteristics and the possibility of reducing the production period which enables a reduction in the cost of final seedling.

Propriedades físicas dos lenhos juvenil e adulto de Pinus elliottii Engelm var. elliottii e de Eucalyptus grandis Hill ex Maiden

The juvenile wood presents great difference in its anatomical and physical properties in relation to the mature wood. That heterogeneity of the wood causes a series of upset for the processing industry. The present research had as objective the study of the physical properties of the juvenile and mature wood of Pinus elliottii Engelm var. elliottii, with 25 years of age and of Eucalyptus grandis Hill ex Maiden, with 30 years of age, coming from the Experimental Station of Itapetininga and State Forest of Santa Barbara, belonging to the Forest Institute of the state of São Paulo. From both species there were taken from radial boards, specimens with dimensions of 20x30x50 mm, for the determination of density, swelling and swelling coefficient of the juvenile and mature wood. The results of the species showed that the mature compared with the juvenile wood presented: (1) an increase in the values of the basic density, at 0% and at 12% of moisture content and of the volumetric, radial and tangential swelling at 12% moisture content and maximum coefficient of radial and tangential swelling; (2) a reduction in the values of longitudinal swelling at 12% and maximum and of the longitudinal swelling coefficient.

Comportamento de adesão da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis proveniente de três condições de manejo

This study aimed to evaluate the adhesion ability of eucalyptus lumber from three tillage systems, using adhesives: resorcinol formaldehyde and two adhesives in water emulsion based on vinyl poly-acetate. The management systems were characterized by three strata, the stratum one (E1) characterized by wood from coppice and 70 months of age, the stratum two (E2) characterized by wood and retirement age of 166 months and stratum three (E3), also characterized by retirement at 70 months of age. The wood was derived from a random mixture of the first two sawn logs, each three feet from the base, which comprised three treatments on the adhesive used. We evaluated the shear strength by compression tests and the percentage of wood failure in the glue line. Based on the results obtained, it can be said that the adhesion had satisfactory performance with all the resins used, and the average values of shear strength of the glue line were shown to be equivalent to the shear strength of solid wood only for the samples which adhered with 'Wonderbond' adhesive and also provide higher values for wood failure (97.64%). The highest density present in the wood of the second stratum (E2) influenced only sticking with the resorcinol formaldehyde resin. For polyvinyl acetate (Cascorez 2590), shear values decreased in the third management condition (E3).

Estresse hídrico em plantio de Eucalyptus grandis vs. Eucalyptus urophylla, em função do solo, substrato e manejo hídrico de viveiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Propriedades físicas e mecânicas de painéis LVL de Eucalyptus grandis

This paper mainly aimed to evaluate the physical and mechanical properties of LVL panels made from Eucalyptus grandis, from reforestation at the region of Senges, in Parana state, Brazil. LVL panels were manufactured using 23 veneers (2,4mm thick each one) in commercial dimension of 2.500 mm long and 1,200 mm wide. The properties of static bending were analyzed (strength and rigidity) in beams of the LVL, in the flatwise and edgewise positions. The properties of compression parallel to grain and shear parallel in the plans L-X and L-Y and density in this LVL panels were also analyzed according to ASTM-D 5456/4761 and ASTM-D 198 codes. The mean values to flatwise bending MOE and MOR were 13114 MPa and 88.76 MPa, respectively, and for edgewise bending MOE and MOR were 15871 MPa and 88.63 MPa, respectively. The density (12%) of the LVL panels and of the veneers were 690 kg/m(3) and 649 kg/m(3). The mean values to parallel compression MOE and MOR were 16856 MPa and 58.05 MPa, respectively. The mean values of the maximum resistance to shear parallel in the plans L-X and L-Y were 5.96 MPa and 591 MPa, respectively. All these values reached partially or they passed the medium limits of reference (normative codes, researches and commercial catalogs) established for LVL panels and original solid wood, attesting overall the quality of those panels produced with this wood.

Decay resistance of thermally-modified Eucalyptus grandis wood at 140 degrees C, 160 degrees C, 180 degrees C, 200 degrees C and 220 degrees C

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

RAPD analysis of genetic variability in a multiprovenance base population of Eucalyptus grandis hill ex maiden

Este estudo visou avaliar a variabilidade e distância genética dentro de uma população-base de melhoramento genético de Eucalyptus grandis. A avaliação da variabilidade genética tem como objetivos principais analisar a base genética da população-base e montar um banco de dados marcadores moleculares da população em análise. Essa população é formada por 327 indivíduos, principalmente das procedências de Coff's Harbour, Atherton e Rio Claro. Devido à heterozigosidade natural dessa população, ela pode ser dividida em diversas subpopulações, de acordo com a latitude e longitude de origem; e dentro de subpopulações, em função do grau de melhoramento genético já realizado do material analisado no Brasil. Isso permitiu avaliar quanto da variabilidade detectada dentro da população-base foi devido a esses fatores: procedência e grau de melhoramento. A aplicação da técnica RAPD permitiu avaliar 70 locos polimórficos, que foram analisados utilizando-se o coeficiente de Jaccard, o que resultou em matrizes de similaridade genética entre os indivíduos. Os dados de similaridade genética posteriormente foram submetidos à análise estatística. Osdados indicaram que a população-base apresenta ampla base genética, com média de similaridade genética de 0,328. O subgrupo denominado Região 3, composto por material selvagem da macrorregião de Atherton, juntamente com material de APS da macrorregião de Coff's Harbour, foi um dos que mais contribuíram para a ampla base genética da população-base. Foi possível detectar diferença estatística entre as populações selvagens das procedências de Atherton e Coff's Harbour, assim como entre essas procedências e a de Rio Claro.

Comportamento de chamamento de Thyrinteina arnobia (Stoll) (Lepidoptera: Geometridae) em Psidium guajava, Eucalyptus grandis e em dieta artificial

Este estudo teve como objetivos determinar e comparar o efeito de três dietas: Psidium guajava, Eucalyptus grandis e dieta artificial no comportamento de chamamento e no padrão temporal do comportamento de chamamento de fêmeas virgens de Thyrinteina arnobia (Stoll). Foram analisados os parâmetros: tempo médio para o início do chamamento, número médio de chamamento, tempo médio de cada chamamento e tempo médio total de chamamento. Os bioensaios relacionados ao comportamento de chamamento de fêmeas virgens foram realizados durante seis escotofases consecutivas e as observações tomadas a cada 5 min., a 22 ± 1ºC, 70 ± 5% de UR e 10h de escotofase. As fêmeas, independente da dieta analisada, apresentaram duas posições diferentes de chamamento. A maioria das fêmeas virgens iniciou o chamamento na 1ª hora da 1ª escotofase. O padrão de chamamento da fêmea individualizada foi característico de um padrão contínuo. O tipo de dieta oferecida na fase larval influenciou o início do comportamento de chamamento (pré-chamamento) e o tempo médio total de chamamento. O tipo de dieta também alterou a coloração da glândula de feromônio.

Efeito da deriva simulada de glyphosate em diferentes partes da planta de Eucalyptus grandis

The present work aimed to evaluate the effects of simulated drift of glyphoste on Eucalyptus grandis, through the application of low doses in different parts of the plant. The experimental design was a randomized block design with five replications. The treatments were glyphosate application at 0; 30; 60; 90 e 120 g a.e. ha(-1) of the commercial formulation Scout (R). Three forms of application were used: applying on leaf, on stem, and on the entire plant (leaf + stem). For leaf application, stems were covered with plastic ribbons to protect them from the solution; the same was made with plants that were sprayed on stems, covering leaf with plastic bag. The application was carried out in an armed stationary spray tips XR 11002 VS, with 183 KPa pressure in volume of 200 L ha(-1). The eucalyptus plants receiving applications in leaves and whole plant (leaves + stem) showing effects of intoxication are more intense about the plants that received the stem applications only. However, there may be increases in height growth and total dry mass of eucalyptus plants in applications of 30 g a.e. ha(-1) glyphosate.

Diversidade genética em populações-núcleo de Eucalyptus grandis

No melhoramento genético de espécies florestais, uma população base ou indivíduos superiores pré-selecionados tem importância fundamental para a manutenção do programa. Indivíduos de melhores procedências e de ampla base genética propiciam a obtenção de ganhos de forma contínua. O objetivo deste trabalho foi avaliar a diversidade genética em duas populações-núcleo de Eucalyptus grandis. Foram avaliados 39 indivíduos, sendo 19 pertencentes à população 1 e 20, à população 2, utilizando-se 14 primers microssatélite. Os fragmentos foram identificados e analisados a partir dos programas GeneScan e Genotyper, utilizando-se um sequenciador automático ABI Prism 3100. O número de alelos encontrados para cada primer variou de cinco a 15 para a população 1 e, de 8 a 18 para a população 2. A heterozigosidade estimada foi maior na população 2, 0,869, contra 0,843 na população 1. A média da distância genética entre os indivíduos da população 1 foi 0,6220 e na população 2 foi 0,6112. Com a caracterização molecular dos indivíduos destas populações foi construído um banco de dados que permitirá, a partir dos parâmetros de genética de populações, monitorar esses programas de melhoramento em diferentes ciclos de seleção.

Utilização de águas residuárias provenientes do tratamento biológico de esgotos domésticos na produção de mudas de Eucalyptus grandis Hill. ex. maiden

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of glass transition temperature for stabilization of board's cracks of Eucalyptus grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lumber quality of Eucalyptus grandis as a function of diametrical position and log steaming

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)