Influência do tratamento térmico do resíduo sólido industrial (Grits) na resistência mecânica de um latossolo para pavimentos de estradas florestais

Em estudos que envolvem o tratamento de solos com aditivos químicos com fins rodoviários, merecem especial importância aquelas pesquisas orientadas no sentido de descobrir novos meios de torná-los mais econômicos e, ao mesmo tempo, mais resistentes. No presente trabalho, o resíduo sólido industrial Grits, oriundo do processo de fabricação de papel e celulose, foi aplicado a um latossolo denominado ETA, característico da microrregião de Viçosa, Minas Gerais, Brasil, com o intuito de melhorar suas características mecânicas para sua aplicação em pavimentos de estradas florestais. O Grits, após receber tratamento térmico a 200, 300, 400, 500 e 600 ºC, em mufla, foi misturado no teor de 10%, em peso, ao solo anteriormente citado. Parâmetros geotécnicos, característicos dos ensaios de compactação e resistência à compressão simples, foram utilizados para avaliar o efeito do tratamento térmico nas misturas solo+10% Grits. Os resultados indicaram que o Grits tem potencial para estabilização de solos de pavimentos de estradas florestais, sendo o melhor resultado alcançado para o Grits tratado a 600 ºC, pois houve ganhos de resistência mecânica.

Produtividade e composição química do capim-Tifton 85 submetido a diferentes taxas de aplicação do percolado de resíduo sólido urbano

Este trabalho foi realizado com o objetivo de avaliar o efeito da aplicação de diferentes taxas de percolado de resíduo sólido urbano (RSU) na produtividade e na composição química da parte aérea do capim-Tifton 85 (Cynodon spp). O percolado foi aplicado nas taxas de 0 testemunha); 250; 500; 750 e 1.000 kg ha-1 d-1 de DBO5, durante 8 meses. No tratamento-testemunha, não receptor do percolado, aplicou-se água da rede de abastecimento público, sendo a lâmina de aplicação definida com base na Evapotranspiração de Referência (ETo). O experimento foi analisado no esquema de parcelas subdivididas, tendo nas parcelas cinco concentrações de DBO5, e nas subparcelas, os cortes, no delineamento em blocos casualizados, com quatro repetições. Os dados foram submetidos à análise de regressão e variância. Observou-se aumento na produtividade de matéria seca, nos teores de proteína bruta e nas concentrações de N, K, Na, Ca, Mg, Mn, Cd, Pb e Fe,na parte aérea do capim,com o aumento nas taxas de aplicação do percolado. As concentrações de N, P e Mn tenderam a decrescer com o número de cortes do capim; as de Cd, Pb e Fe tenderam à estabilização após o 2º ou 3º cortes; e as de Na tenderam a aumentar após o 3º corte. As concentrações de K, Ca e Mg ficaram instáveis.

Caracterização e utilização do resíduo sólido gerado do acabamento de peças de zamac como matéria-prima para a obtenção de materiais cerâmicos

A crescente preocupação com o meio ambiente, associada com o aumento da população e conseqüentemente da geração de resíduos, induz pesquisas no sentido de viabilizar o aproveitamento de resíduos como matéria-prima para a produção de materiais. O resíduo sólido gerado no processo de acabamento de peças de zamac é, devido às suas características iniciais, uma fonte potencialmente interessante de matéria-prima para a obtenção de produtos cerâmicos. Este trabalho apresenta um estudo de obtenção de materiais cerâmicos utilizando o resíduo sólido gerado no acabamento de peças de zamac como matéria-prima. Para tanto, foi realizada a caracterização do resíduo através de análise química, mineralógica, morfológica, termogravimétrica, granulométrica, determinação do teor de umidade, perda ao fogo, área superficial, bem como a caracterização quanto aos riscos ao meio ambiente. Para comprovar o potencial de utilização do resíduo como matéria-prima para a produção de materiais cerâmicos foram confeccionados corpos-de-prova utilizando somente o resíduo. Estes corpos-de-prova foram caracterizados quanto as suas propriedades físicas e mecânicas Devido ao fato dos corpos-de-prova confeccionados somente com o resíduo apresentarem alta porosidade e conseqüentemente baixa resistência mecânica, foram confeccionados corpos-de-prova com diferentes formulações de vidro adicionado ao resíduo. O vidro utilizado foi caracterizado quanto a sua distribuição granulométrica e composição química. Estes corpos-de-prova foram caracterizados quanto as suas propriedades físicas, mecânicas, mineralógicas, microestruturais. Também foi avaliada a compatibilidade ambiental do processo de queima de corpos-de-prova, através da determinação das emissões gasosas geradas no processo. Os resultados obtidos demonstram que o material cerâmico produzido pode ser utilizado como placas cerâmicas para revestimento.

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Adição de resíduo cerâmico em pastas geopoliméricas para cimentação de poços de petróleo

The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic

Caracterização de resíduo sólido formado em biodiesel de sebo bovino

Biodiesel production has increased over the last decade because of the benefits associated with this fuel, including renewability, domestic feedstock, lower toxicity, and biodegradability. From 2008, the use of beef tallow as a feedstock for biodiesel production in Brazil has increased in significance, representing the second largest source of biodiesel, after soybeans. However, the performance of biodiesel in cold weather conditions is worse than diesel because of deposition of insoluble at low temperatures, accelerating the plugging of fuel filters and injectors of the vehicle engine. Studies have been conducted on beef tallow biodiesel, mostly related to the properties of thermal and oxidative stability. However, few studies have described the nature of the precipitate formed and its influence on product quality. Research suggests that the cause of deposition is related to the nature of saturated esters and monoacylglycerols as inducing agents. This study monitored the levels of mono-, diand triacylglycerols, the oxidation stability and the cold filter plugging point (CFPP) in beef tallow biodiesel samples from two commercial producers in Brazil for a period of twelve months. Filtered precipitates were analyzed by comparative techniques of GCFID, HPLC-UV/VIS, HPLC-MS-IT-TOF and TG to verify the nature, using monopalmitin and monostearin as reference standards. The formation of precipitate reduced the levels of monoacylglycerols in the beef tallow biodiesel. GC-FID and LCMS- IT-TOF results confirmed the nature of the deposit as saturated monoacylglycerols, predominantly monostearin and monopalmitin as the second major component. Moreover the TG analysis of the residue indicated similar thermal decomposition of the reference standards. The precipitate did not affect the oxidation stability of beef tallow biodiesel and the CFPP characteristic of blends up B60. However, the presence of iron reduced significantly the oxidation stability of biodiesel

Caracterização de resíduo sólido formado em biodiesel de sebo bovino

Biodiesel production has increased over the last decade because of the benefits associated with this fuel, including renewability, domestic feedstock, lower toxicity, and biodegradability. From 2008, the use of beef tallow as a feedstock for biodiesel production in Brazil has increased in significance, representing the second largest source of biodiesel, after soybeans. However, the performance of biodiesel in cold weather conditions is worse than diesel because of deposition of insoluble at low temperatures, accelerating the plugging of fuel filters and injectors of the vehicle engine. Studies have been conducted on beef tallow biodiesel, mostly related to the properties of thermal and oxidative stability. However, few studies have described the nature of the precipitate formed and its influence on product quality. Research suggests that the cause of deposition is related to the nature of saturated esters and monoacylglycerols as inducing agents. This study monitored the levels of mono-, diand triacylglycerols, the oxidation stability and the cold filter plugging point (CFPP) in beef tallow biodiesel samples from two commercial producers in Brazil for a period of twelve months. Filtered precipitates were analyzed by comparative techniques of GCFID, HPLC-UV/VIS, HPLC-MS-IT-TOF and TG to verify the nature, using monopalmitin and monostearin as reference standards. The formation of precipitate reduced the levels of monoacylglycerols in the beef tallow biodiesel. GC-FID and LCMS- IT-TOF results confirmed the nature of the deposit as saturated monoacylglycerols, predominantly monostearin and monopalmitin as the second major component. Moreover the TG analysis of the residue indicated similar thermal decomposition of the reference standards. The precipitate did not affect the oxidation stability of beef tallow biodiesel and the CFPP characteristic of blends up B60. However, the presence of iron reduced significantly the oxidation stability of biodiesel

Avaliação da atividade mutagênica do resíduo sólido de uma fábrica de confecções de meias e lingerie em ensaios com Salmonella typhimurium

Cancer is one of the most hazardous effects to human health caused by the exposition to chemical agents. The search for new technological solutions in the industrial field led to a rapid increase in the productive sector, causing the workers to be exposed to millions of potentially toxic agents, substances potentially harmful to health. This study presents the mutagenic activity of sweepings from a sock and lingerie factory in Araraquara-Brazil, assayed with Salmonella typhimurium. All the extracts from the factory had mutagenic on activity the YG1024 strain, which is extremely sensitive to detect the mutagenic activity of the arilhydroxilamines, nitroarenes and aromatic amines. The extracts were non-mutagenics for the strains TA100 and TA98. The analysis of the mutagenicity of industrial residues is highly important because employees that participate in the production are directly exposed to those agents, as well as to the environment where the garbage is deposited.

Viabilidade energética e econômica da incineração de resíduo sólido urbano considerando a segregação para reciclagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A política pública municipal de resíduo sólido: sua incidência sobre os catadores de lixo do aterro sanitário do Aurá em Belém

Este estudo analisa a incidência da política pública municipal de resíduo sólido sobre os catadores de materiais recicláveis no aterro sanitário do Aurá, no período de 2002 a 2008. A análise é pautada nas ações implementadas durante o governo do Partido dos Trabalhadores (PT) 1997-2004 e do Partido Trabalhista Brasileiro (PTB) 2005... Em termos metodológicos, trata-se de um estudo de caso baseado no exame das políticas públicas dirigidas a este segmento da população e suas formas organizativas. A situação dos catadores do aterro sanitário do Aurá, no município de Belém, constitui-se progressivamente como um problema complexo a ser enfrentado, sobretudo pelo poder público municipal por meio da implementação de políticas públicas. Assim, é objetivo deste trabalho analisar como a política pública de resíduo sólido implantada pela Prefeitura Municipal de Belém, através da Secretaria Municipal de Saneamento (SESAN), incidiu sobre a condição de vida (laboral e política) dos catadores do aterro sanitário do Aurá. Esta política, tem início com a implementação do Projeto de Biorremediação. Estruturado em dois eixos de atuação um físico e outro social. Este estudo se detém na análise deste último eixo, pois focalizou as ações para os catadores de materiais recicláveis, como representantes do mercado informal. A pesquisa revela as estratégias de sobrevivência, os níveis de empoderamento individual e coletivo dos catadores e a prática do aviamento mediando relações de trabalho e poder.

Resíduo sólido orgânico urbano e níveis de irrigação no cultivo de crambe

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Manejo do lodo de esgoto e nitrogênio mineral na fertilidade do solo ao longo do tempo

The use of sewage sludge is a practice highly promising for the development of sustainable agricultural systems. The objective of this study was to assess the improvement in soil fertility management strategies on different sewage sludge and mineral nitrogen after seven application of this residue. The experiment was carried at the Sao Manuel Experimental Farm belonging to the faculty of Agronomic Sciences of UNESP, Botucatu, located in the county of Sao Manuel. It was adopted the experimental design in a randomized blocks consisting of six treatments and five repetitions defined as follows: T0 - without nitrogen fertilizer, T1 - mineral fertilizer nitrogen according to the crop needs, T2 - 50% nitrogen from sewage sludge and 50% in the form of chemical fertilizer, T3 - 100% of nitrogen recommended by the culture, from sewage sludge, T4 - 150% of nitrogen recommended by the culture, from sewage sludge and T5 - 200% of the nitrogen from the sewage sludge. It has done seven application of sewage sludge in crop ( year 1 - sunflower, year 2 sunflower, year 3 - oats and bean, year 4 - triticale and sunflower, year 5 - wheat) and the first three applications were treated with sewage sludge and the other applications were composted sludge. In the depth 0-20 cm, the sewage sludge promoted an increase in levels of organic matter, P, S, H+Al, CEC and decreased in soil pH. In the depth of 20 to 40 cm the sewage sludge promoted a decrease in pH and increase in soil organic matter, P, H+Al, K, Ca, SB, CEC and S. Mineral N influence the increase in the depth S of 20-40 cm.

Lodo de esgoto e adubação mineral na recuperação de atributos químicos de solo degradado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Compostagem de resíduo sólido de abatedouro avícola

The great demand for animal protein was responsible for the increase on the broilers production and hence, the generation of waste from the poultry slaughter was increased as well, which in turn, propelled the development of techniques that allow the reuse and recycling of these wastes. The objective of this study was to evaluate the efficiency of composting on the treatment and recycling of solid waste from poultry slaughterhouse. The solid waste was from a commercial poultry slaughterhouse and was composed of viscera, muscle, fat, bone, blood and feathers that was mixed with a source of carbon, rice husk. Initially, a windrow with a volume of 1.5m(3) was built, and then some parameters were monitored: temperature, total solids (TS), volatile (VS), N, P, K, organic carbon (C), composting organic matter (COC), organic matter resistant to composting (MORC), chemical oxygen demand (COD), mass and volume of the windrow, most probable number (MPN) of total and fecal coliforms, as well as their reductions during the process. The maximum temperature reached in the center of the windrow was 53.3 degrees C (weekly average) since reductions of weight of TS and VS and volume during the pre-composting were 36.1, 44.3 and 23.3%, respectively and during the composting process was 21.8, 23.8 and 4.4%. The low volume reduction can be associated with high concentrations of MORC (40.1%) which can be mainly related to the quality of the carbon source. The process produced satisfactory total reductions of TS, VS and volume that were respectively, 50.1, 57.5 and 26.7%. However reductions were observed in 43% of amount of nitrogen in the final compound. Despite reductions in nitrogen content, composting proved to be an effective method in the treatment of solid waste from poultry slaughterhouse.

Remoção de elementos potencialmente tóxicos em resíduo sólido da indústria canavieira para utilização como condicionador de solo na agricultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)