Metabolism of mesozooplankton in the North-Eastern Aegean Sea during SES_GR2 in October 2008

The dataset is based on samples taken during October 2008 in the North-Eastern Aegean Sea. NH4 excretion rate: Mesozooplankton is collected by vertical tows within the Black sea water body mass layer in the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside 8 bottles of 350 or 650 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and then on a wheell at dim light and maintaining the in situ temperature. 4 bottles without animals are used as control. After 24hours bottles are opened and water samples taken for NH4 chemical analysis. Then the bottle content is filtered on pre-combusted preweighted CF/F filters, which are then dried at 60 C and weighted. Calculations are made as described by Ikeda et al. (2000). Samples for the NH4 determination were collected in pre-cleaned 50 ml Duran bottles and analysed onboard immediately after collection. Ammonium concentration was measured on a Perkin Elmer Lambda 25 UV/VIS Spectrometer according to the method of Koroleff (1970). PO4 excretion rate: Mesozooplankton is collected by vertical tows within the Black sea water body mass layer in the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside 8 bottles of 350 or 650 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and then on a wheell at dim light and maintaining the in situ temperature. 4 bottles without animals are used as control. After 24hours bottles are opened and water samples taken for PO4 chemical analysis. Then the bottle content is filtered on pre-combusted preweighted CF/F filters, which are then dried at 60 C and weighted. Calculations are made as described by Ikeda et al. (2000). Samples for the determination of PO4 were collected in pre-cleaned 50 ml polyethylene volumetric tubes and analysed on board immediately after collection. PO4 concentration was measured on a Perkin Elmer Lambda 25 UV/VIS Spectrometer following the protocol of Murphy and Riley (1962). O2 consumption rate: Mesozooplankton is collected by vertical tows within the Black sea water body mass layer in the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside 8 bottles of 350 or 650 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and then on a wheell at dim light and maintaining the in situ temperature. 4 bottles without animals are used as control. After 24hours bottles are opened and water samples taken for O2 chemical analysis. Then the bottle content is filtered on pre-combusted preweighted CF/F filters, which are then dried at 60 C and weighted. Calculations are made as described by Ikeda et al. (2000). For the dissolved O2 determination, the samples were fixed immediately after collection and analysed with the Winkler method as modified by Carpenter (1965a and 1965b). Carbon specific CO2 respiration rate: O2 consumption rate was converted to CO2 production using a RQ value of 0.87 (Mayzaud et al. 2005). Conversion of mesozooplankton dry weight to carbon was done using the % of carbon content measured in the same station from the SESAME dataset of zooplankton biomass. Carbon specific NH4 excretion rate: Conversion of mesozooplankton dry weight to carbon was done using the % of carbon content measured in the same station from the SESAME dataset of zooplankton biomass. Carbon specific PO4 excretion rate: Conversion of mesozooplankton dry weight to carbon was done using the % of carbon content measured in the same station from the SESAME dataset of zooplankton biomass.

MARECHIARA-mesozooplankton long-term time-series at the fixed coastal station in the Gulf of Naples: abundance and biomass, data for the years 1984-2006

The MARECHIARA-mesozooplankton dataset contains mesozooplankton data collected in the ongoing time-series at Sation MC (40°48.5' N, 14°15' E) in the Gulf of Naples. This dataset spans over the period 1984-2006 and contains data of mesozooplankton abundance and species composition as well as biomass (as dry weight). Mesozooplankton was regularly sampled in 1984-1990 and 1995-2006, only a few samples were collected in 1991-1992 and no samples in 1993-1994. During the first period of the series sampling frequency was fortnightly, and weekly since 1995.

Faecal pellet production of copepoda collected in water depth up to 100 meters in the eastern Mediterranean Sea in March and April 2008 during SES_GR1

The SES_UNLUATA_GR1-Mesozooplankton faecal pellet production rates dataset is based on samples taken during March and April 2008 in the Northern Libyan Sea, Southern Aegean Sea and in the North-Eastern Aegean Sea. Mesozooplankton is collected by vertical tows within the 0-100 m layer or within the Black sea water body mass layer in the case of the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside several glass beaker of 250 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and with a 100 µm net placed 1 cm above the beaker bottom. Beakers are then placed in an incubator at natural light and maintaining the in situ temperature. After 1 hour pellets are separated from animals and placed in separated flasks and preserved with formalin. Pellets and are counted and measured using an inverted microscope. Animals are scanned and counted using an image analysis system. Carbon- Specific faecal pellet production is calculated from a) faecal pellet production, b) individual carbon: Animals are scanned and their body area is measured using an image analysis system. Body volume is then calculated as an ellipsoid using the major and minor axis of an ellipse of same area as the body. Individual carbon is calculated from a carbon- total body volume of organisms (relationship obtained for the Mediterranean Sea by Alcaraz et al. (2003) divided by the total number of individuals scanned and c) faecal pellet carbon: Faecal pellet length and width is measured using an inverted microscope. Faecal pellet volume is calculated from length and width assuming cylindrical shape. Conversion of faecal pellet volume to carbon is done using values obtained in the Mediterranean from: a) faecal pellet density 1,29 g cm**3 (or pg µm**3) from Komar et al. (1981); b) faecal pellet DW/WW=0,23 from Elder and Fowler (1977) and c) faecal pellet C%DW=25,5 Marty et al. (1994).

Faecal pellet production of copepoda collected in water depth up to 20 meters in the eastern Mediterranean Sea in March and April 2008 during SES_GR1

The SES_GR1-Mesozooplankton faecal pellet production rates dataset is based on samples taken during April 2008 in the North-Eastern Aegean Sea. Mesozooplankton is collected by vertical tows within the Black sea water body mass layer in the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside several glass beaker of 250 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and with a 100 µm net placed 1 cm above the beaker bottom. Beakers are then placed in an incubator at natural light and maintaining the in situ temperature. After 1 hour pellets are separated from animals and placed in separated flasks and preserved with formalin. Pellets are counted and measured using an inverted microscope. Animals are scanned and counted using an image analysis system. Carbon- Specific faecal pellet production is calculated from a) faecal pellet production, b) individual carbon: Animals are scanned and their body area is measured using an image analysis system. Body volume is then calculated as an ellipsoid using the major and minor axis of an ellipse of same area as the body. Individual carbon is calculated from a carbon- total body volume of organisms (relationship obtained for the Mediterranean Sea by Alcaraz et al. (2003) divided by the total number of individuals scanned and c) faecal pellet carbon: Faecal pellet length and width is measured using an inverted microscope. Faecal pellet volume is calculated from length and width assuming cylindrical shape. Conversion of faecal pellet volume to carbon is done using values obtained in the Mediterranean from: a) faecal pellet density 1,29 g cm**3 (or pg µm**3) from Komar et al. (1981); b) faecal pellet DW/WW=0,23 from Elder and Fowler (1977) and c) faecal pellet C%DW=25,5 Marty et al. (1994).