THE USE OF LIFE-CYCLE ANALYSIS TO REDUCE THE ENVIRONMENTAL IMPACT OF MATERIALS IN MANUFACTURING

This thesis is composed of three life-cycle analysis (LCA) studies of manufacturing to determine cumulative energy demand (CED) and greenhouse gas emissions (GHG). The methods proposed could reduce the environmental impact by reducing the CED in three manufacturing processes. First, industrial symbiosis is proposed and a LCA is performed on both conventional 1 GW-scaled hydrogenated amorphous silicon (a-Si:H)-based single junction and a-Si:H/microcrystalline-Si:H tandem cell solar PV manufacturing plants and such plants coupled to silane recycling plants. Using a recycling process that results in a silane loss of only 17 versus 85 percent, this results in a CED savings of 81,700 GJ and 290,000 GJ per year for single and tandem junction plants, respectively. This recycling process reduces the cost of raw silane by 68 percent, or approximately $22.6 and $79 million per year for a single and tandem 1 GW PV production facility, respectively. The results show environmental benefits of silane recycling centered around a-Si:H-based PV manufacturing plants. Second, an open-source self-replicating rapid prototype or 3-D printer, the RepRap, has the potential to reduce the environmental impact of manufacturing of polymer-based products, using distributed manufacturing paradigm, which is further minimized by the use of PV and improvements in PV manufacturing. Using 3-D printers for manufacturing provides the ability to ultra-customize products and to change fill composition, which increases material efficiency. An LCA was performed on three polymer-based products to determine the CED and GHG from conventional large-scale production and are compared to experimental measurements on a RepRap producing identical products with ABS and PLA. The results of this LCA study indicate that the CED of manufacturing polymer products can possibly be reduced using distributed manufacturing with existing 3-D printers under 89% fill and reduced even further with a solar photovoltaic system. The results indicate that the ability of RepRaps to vary fill has the potential to diminish environmental impact on many products. Third, one additional way to improve the environmental performance of this distributed manufacturing system is to create the polymer filament feedstock for 3-D printers using post-consumer plastic bottles. An LCA was performed on the recycling of high density polyethylene (HDPE) using the RecycleBot. The results of the LCA showed that distributed recycling has a lower CED than the best-case scenario used for centralized recycling. If this process is applied to the HDPE currently recycled in the U.S., more than 100 million MJ of energy could be conserved per annum along with significant reductions in GHG. This presents a novel path to a future of distributed manufacturing suited for both the developed and developing world with reduced environmental impact. From improving manufacturing in the photovoltaic industry with the use of recycling to recycling and manufacturing plastic products within our own homes, each step reduces the impact on the environment. The three coupled projects presented here show a clear potential to reduce the environmental impact of manufacturing and other processes by implementing complimenting systems, which have environmental benefits of their own in order to achieve a compounding effect of reduced CED and GHG.

Q method factor analysis of stakeholder social perspectives of the effectiveness of Environmental Impact Assessment public participation in the Western Cape, South Africa

Public participation is an integral part of Environmental Impact Assessment (EIA), and as such, has been incorporated into regulatory norms. Assessment of the effectiveness of public participation has remained elusive however. This is partly due to the difficulty in identifying appropriate effectiveness criteria. This research uses Q methodology to discover and analyze stakeholder's social perspectives of the effectiveness of EIAs in the Western Cape, South Africa. It considers two case studies (Main Road and Saldanha Bay EIAs) for contextual participant perspectives of the effectiveness based on their experience. It further considers the more general opinion of provincial consent regulator staff at the Department of Environmental Affairs and the Department of Planning (DEA&DP). Two main themes of investigation are drawn from the South African National Environmental Management Act imperative for effectiveness: firstly, the participation procedure, and secondly, the stakeholder capabilities necessary for effective participation. Four theoretical frameworks drawn from planning, politics and EIA theory are adapted to public participation and used to triangulate the analysis and discussion of the revealed social perspectives. They consider citizen power in deliberation, Habermas' preconditions for the Ideal Speech Situation (ISS), a Foucauldian perspective of knowledge, power and politics, and a Capabilities Approach to public participation effectiveness. The empirical evidence from this research shows that the capacity and contextual constraints faced by participants demand the legislative imperatives for effective participation set out in the NEMA. The implementation of effective public participation has been shown to be a complex, dynamic and sometimes nebulous practice. The functional level of participant understanding of the process was found to be significantly wide-ranging with consequences of unequal and dissatisfied stakeholder engagements. Furthermore, the considerable variance of stakeholder capabilities in the South African social context, resulted in inequalities in deliberation. The social perspectives revealed significant differences in participant experience in terms of citizen power in deliberation. The ISS preconditions are highly contested in both the Saldanha EIA case study and the DEA&DP social perspectives. Only one Main Road EIA case study social perspective considered Foucault's notion of governmentality as a reality in EIA public participation. The freedom of control of ones environment, based on a Capabilities approach, is a highly contested notion. Although agreed with in principle, all of the social perspectives indicate that contextual and capacity realities constrain its realisation. This research has shown that Q method can be applied to EIA public participation in South Africa and, with the appropriate research or monitoring applications it could serve as a useful feedback tool to inform best practice public participation.

Environmental impact indicators estimation in European rural devlopment programs. Limitations of evaluators and financial institutions? Expectatios

The European Commission established Mid-term evaluation for the period 2007-2013 on Rural Development Programs as part of a continuous evaluation system. Mid-term evaluations are important for the Commission because they help measuring the success of a program, as well as giving advice and pointing out good practices for the current and consecutive programming periods. One of the main elements used to achieve these objectives is the impact indicators estimation of the program. This paper will focus on how impact indicators estimation is done for just the environmental indicators. To do this the 88 Mid-term evaluations of Rural Development Programs for 2007-2013 period, were analyzed. This study shows how far the actual methodologies to obtain impact indicators? values are from what the European Commission expects when demanding this task to be done.

Arapaho National Forest (N.F.), Roosevelt National Forest (N.F.), Long Draw Reservoir, land use authorization : environmental impact statement.

*There is a Dapp for this EIS which is shared by, and listed under, the Joe Wright Reservoir EIS (FS-CO-940313). A change in this file's call number should be changed in the NOTE section of the Wright Reservoir file.

Draft environmental impact statement, Fence Lake project.

"BLM-NM-PT-90-010-7122"--P. [2] of cover.

Hazardous chemicals in fish : Wisconsin power plant impact study /

Mode of access: Internet.

Predicting effects of an electric generating station on wetland passerine birds : Wisconsin power plant impact study /

Grant R803971.

Uptake, metabolism and disposition of xenobiotic chemicals in fish : Wisconsin power plant impact study /

"Grant no. R803971."

Final environmental impact statement : Sultan River project, FERC no. 2157--Washington.

"FERC/EIS-0015"--Cover.

Final environmental impact statement for the suppression of the Southern pine beetle, Southern Region.

"February 1987."

Official file of comments received on Alaska Natural Gas Transportation System draft environmental impact statement.

Comments received by U.S. EIS Task force.

Ecological studies of fish near a coal-fired generating station and related laboratory studies : Wisconsin power plant impact study /

"Grant no. R803971."

Responses of stream invertebrates to an ashpit effluent : Wisconsin power plant impact study /

"August 1980."

Impacts of coal-fired power plants on local ground-water systems : Wisconsin power plant impact study /

Mode of access: Internet.

Proposed 1985 Outer Continental Shelf oil and gas lease sale offshore the south Atlantic states : OCS sale no. 90 : draft environmental impact statement /

"MMS 84-0007"--Cover.