Interactive Graphic Simulation: An Advanced Methodology to Improve the Teaching-Learning Process in Nuclear Engineering Education and Training

Nowadays, computer simulators are becoming basic tools for education and training in many engineering fields. In the nuclear industry, the role of simulation for training of operators of nuclear power plants is also recognized of the utmost relevance. As an example, the International Atomic Energy Agency sponsors the development of nuclear reactor simulators for education, and arranges the supply of such simulation programs. Aware of this, in 2008 Gas Natural Fenosa, a Spanish gas and electric utility that owns and operate nuclear power plants and promotes university education in the nuclear technology field, provided the Department of Nuclear Engineering of Universidad Politécnica de Madrid with the Interactive Graphic Simulator (IGS) of “José Cabrera” (Zorita) nuclear power plant, an industrial facility whose commercial operation ceased definitively in April 2006. It is a state-of-the-art full-scope real-time simulator that was used for training and qualification of the operators of the plant control room, as well as to understand and analyses the plant dynamics, and to develop, qualify and validate its emergency operating procedures.

The history of technology in education. A comparative study and forecast

Area, launched in 1999 with the Bologna Declaration, has bestowed such a magnitude and unprecedented agility to the transformation process undertaken by European universities. However, the change has been more profound and drastic with regards to the use of new technologies both inside and outside the classroom. This article focuses on the study and analysis of the technology’s history within the university education and its impact on teachers, students and teaching methods. All the elements that have been significant and innovative throughout the history inside the teaching process have been analyzed, from the use of blackboard and chalk during lectures, the use of slide projectors and transparent slides, to the use of electronic whiteboards and Internet nowadays. The study is complemented with two types of surveys that have been performed among teachers and students during the school years 1999 - 2011 in the School of Civil Engineering at the Polytechnic University of Madrid. The pros and cons of each of the techniques and methodologies used in the learning process over the last decades are described, unfolding how they have affected the teacher, who has evolved from writing on a whiteboard to project onto a screen, the student, who has evolved from taking handwritten notes to download information or search the Internet, and the educational process, that has evolved from the lecture to acollaborative learning and project-based learning. It is unknown how the process of learning will evolve in the future, but we do know the consequences that some of the multimedia technologies are having on teachers, students and the learning process. It is our goal as teachers to keep ourselves up to date, in order to offer the student adequate technical content, while providing proper motivation through the use of new technologies. The study provides a forecast in the evolution of multimedia within the classroom and the renewal of the education process, which in our view, will set the basis for future learning process within the context of this new interactive era.

An experimental study on Aerobic Gymnastic: performance analysis as an effective evaluation for technique and teaching of motor gestures

Aerobic Gymnastic is the ability to perform complex movements produced by the traditional aerobic exercises, in a continuous manner, with high intensity, perfectly integrated with soundtracks. This sport is performed in an aerobic/anaerobic lactacid condition and expects the execution of complex movements produced by the traditional aerobic exercises integrated with difficulty elements performed with a high technical level. An inaccuracy about this sport is related to the name itself “aerobic” because Aerobic Gymnastic does not use just the aerobic work during the competition, due to the fact that the exercises last among 1’30” and 1’45” at high rhythm. Agonistic Aerobics exploit the basic movements of amateur Aerobics and its coordination schemes, even though the agonistic Aerobics is so much intense than the amateur Aerobics to need a completely different mix of energetic mechanisms. Due to the complexity and the speed with which you perform the technical elements of Aerobic Gymnastic, the introduction of video analysis is essential for a qualitative and quantitative evaluation of athletes’ performance during the training. The performance analysis can allow the accurate analysis and explanation of the evolution and dynamics of a historical phenomenon and motor sports. The notational analysis is used by technicians to have an objective analysis of performance. Tactics, technique and individual movements can be analyzed to help coaches and athletes to re-evaluate their performance and gain advantage during the competition. The purpose of the following experimental work will be a starting point for analyzing the performance of the athletes in an objective way, not only during competitions, but especially during the phases of training. It is, therefore, advisable to introduce the video analysis and notational analysis for more quantitative and qualitative examination of technical movements. The goal is to lead to an improvement of the technique of the athlete and the teaching of the coach.

Combined medical-engineering study of injury and damage to the knee joint in impact. Final report.

National Highway Safety Bureau, Washington, D.C.

Graduate study and research in civil and sanitary engineering.

Mode of access: Internet.

Graduate study and research in mechanical engineering.

Cover title.

Surface wave techniques for the study of engineering structures and materials

A wire drive pulse echo method of measuring the spectrum of solid bodies described. Using an 's' plane representation, a general analysis of the transient response of such solids has been carried out. This was used for the study of the stepped amplitude transient of high order modes of disks and for the case where there are two adjacent resonant frequencies. The techniques developed have been applied to the measurenent of the elasticities of refractory materials at high temperatures. In the experimental study of the high order in-plane resonances of thin disks it was found that the energy travelled at the edge of the disk and this initiated the work on one dimensional Rayleigh waves.Their properties were established for the straight edge condition by following an analysis similar to that of the two dimensional case. Experiments were then carried out on the velocity dispersion of various circuits including the disk and a hole in a large plate - the negative curvature condition.Theoretical analysis established the phase and group velocities for these cases and experimental tests on aluminium and glass gave good agreement with theory. At high frequencies all velocities approach that of the one dimensional Rayleigh waves. When applied to crack detection it was observed that a signal burst travelling round a disk showed an anomalous amplitude effect. In certain cases the signal which travelled the greater distance had the greater amplitude.An experiment was designed to investigate the phenanenon and it was established that the energy travelled in two nodes with different velocities.It was found by analysis that as well as the Rayleigh surface wave on the edge, a seoond node travelling at about the shear velocity was excited and the calculated results gave reasonable agreement with the experiments.

Breaking down barriers:teenage girls’ perceptions of engineering as a study and career choice

Background: Stereotypically perceived to be an ‘all male’ occupation, engineering has for many years failed to attract high numbers of young women [1,2]. The reasons for this are varied, but tend to focus on misconceptions of the profession as being more suitable for men. In seeking to investigate this issue a participatory research approach was adopted [3] in which two 17 year-old female high school students interviewed twenty high school girls. Questions focused on the girls’ perceptions of engineering as a study and career choice. The findings were recorded and analysed using qualitative techniques. The study identified three distinctive ‘influences’ as being pivotal to girls’ perceptions of engineering; pedagogical; social; and, familial. Pedagogical Influences: Pedagogical influences tended to focus on science and maths. In discussing science, the majority of the girls identified biology and chemistry as more ‘realistic’ whilst physics was perceived to more suitable for boys. The personality of the teacher, and how a particular subject is taught, proved to be important influences shaping opinions. Social Influences: Societal influences were reflected in the girls’ career choice with the majority considering medical or social science related careers. Although all of the girls believed engineering to be ‘male dominated’, none believed that a woman should not be engineer. Familial Influences: Parental influence was identified as key to career and study choice; only two of the girls had discussed engineering with their parents of which only one was being actively encouraged to pursue a career in engineering. Discussion: The study found that one of the most significant barriers to engineering is a lack of awareness. Engineering did not register in the girls’ lives, it was not taught in school, and only one had met a female engineer. Building on the study findings, the discussion considers how engineering could be made more attractive to young women. Whilst misconceptions about what an engineer is need to be addressed, other more fundamental pedagogical barriers, such as the need to make physics more attractive to girls and the need to develop the curriculum so as to meet the learning needs of 21st Century students are discussed. By drawing attention to the issues around gender and the barriers to engineering, this paper contributes to current debates in this area – in doing so it provides food for thought about policy and practice in engineering and engineering education.

Heteronormativity and teaching: A phenomenological study of lesbian teachers

The purpose of this phenomenological study was to understand what impact “heteronormativity” has on a lesbian teacher's perception of her instructional style, content, and context of curriculum taught. Through taped interviews with lesbian educators, this research examined the lived experience of the lesbian teacher. The framework for this study included theories related to historical, sociocultural, and psychosocial development while the methodology included a qualitative design using primary elements of a phenomenological study outlined without ignoring the influence associated with contextualism. Due to the sensitive nature of the study nine women who were the focus of this research were volunteers with the first serving as a “gatekeeper” to assist in the pilot study. The subsequent group evolved as a result of “snowballing” to gain more participants. ^ The data in the form of narrative derived from the interviews was transcribed, color-coded, and organized into four themes and associated sub-themes, based upon the perceptions of these educators. These themes characterized the coming out process of a lesbian, which directly paralleled the personal and professional development of the lesbian educator, emerged as a result of the analysis. They included: (a) self-acknowledgement; (b) self-indentification; (c) coming out to other lesbians by overcoming fear and establishing relationships; (d) coming out to others by overcoming heteronormativity by using support groups in defining a lesbian's role as a teacher. ^ The results of this study showed that the acceptance of the lesbian culture, shared with the acknowledgement, rather than compliance or defiance, of cultural hegemony can allow the lesbian educator to develop a curriculum and a classroom climate that will foster understanding and even generate social change among colleagues, parents, and students, one person at a time. ^

Convergence and translation: attitudes to inter-professional learning and teaching of creative problem-solving among medical and engineering students and staff

Background: Healthcare worldwide needs translation of basic ideas from engineering into the clinic. Consequently, there is increasing demand for graduates equipped with the knowledge and skills to apply interdisciplinary medicine/engineering approaches to the development of novel solutions for healthcare. The literature provides little guidance regarding barriers to, and facilitators of, effective interdisciplinary learning for engineering and medical students in a team-based project context. Methods: A quantitative survey was distributed to engineering and medical students and staff in two universities, one in Ireland and one in Belgium, to chart knowledge and practice in interdisciplinary learning and teaching, and of the teaching of innovation. Results: We report important differences for staff and students between the disciplines regarding attitudes towards, and perceptions of, the relevance of interdisciplinary learning opportunities, and the role of creativity and innovation. There was agreement across groups concerning preferred learning, instructional styles, and module content. Medical students showed greater resistance to the use of structured creativity tools and interdisciplinary teams. Conclusions: The results of this international survey will help to define the optimal learning conditions under which undergraduate engineering and medicine students can learn to consider the diverse factors which determine the success or failure of a healthcare engineering solution.

A case study of teaching and learning practice in a Chinese adult institution

Résumé: Cette recherche s'est réalisée dans une institution chinoise de formation des adultes. Il existe très peu d'études présentant la pratique de l'enseignement et de l'apprentissage en Chine. Aussi, il semble que cette étude de cas puisse être utile. Elle porte sur le personnel de formation en administration économique dans un centre de formation de Tianjin. Le but premier de cette recherche est de décrire ce qui se fait à cet institut de formation des adultes. Les aspects couverts vont de la sélection du contenu de formation et des modalités d'enseignement jusqu'à la compréhension de l'enseignement et de l'apprentissage. À partir de l'expérience des professeurs de ce centre de Tianjin, cette étude cherche précisément à décrire leurs perceptions et leurs attitudes en regard d'un enseignement centré sur l'apprentissage et développé selon un mode de collaboration. Les fondements théoriques retenus s'inspirent des conceptions andragogiques de Knowles, de celles de Brookfield qui ont trait aux rôles des formateurs et formatrices d'adultes et de Conti qui présente une conception de l'enseignement qui se développe selon un mode de collaboration. Les données sont été retenues à la suite d'interviews et de questionnaires. Ce dernier instrument a été administré à 70 professeurs de formation aux adultes. Les résultats obtenus sont décrits et analysés. Les principaux éléments indiquent que la pratique actuelle de formation des adultes à ce centre de Tianjin ne tient pas compte des principes de l'éducation des adultes présenté selon un mode de collaboration. La formation est centrée sur l'enseignement. Il est à souhaiter que cette recherche contribuera à développer une meilleure compréhension de l'enseignement et de l'apprentissage en Chine tel que perçus par les formateurs et formatrices. Quelques suggestions de recherche complémentaires sont proposées à la fin.||Abstract: The present study grew out of one Chinese adult institute. Relatively few works are available that present a view of what actually happens in Chinese adult teaching and learning practice. Accordingly, it is believed that a case study on Tianjin Institute of Training Economic Management Personnel (TITEMP) which has been working for years in varions forms of adult programs, will be very useful addition to the knowledge of Chinese adult teaching and learning. The primary purpose of the present study is to serve as an introduction to one Chinese adult institute (TITEMP) in terms of characteristics of teaching, including selecting teaching content and teaching pattern, and to expand the understanding of Chinese adult teaching and learning. Based on the experiences of teachers at TITEMP, the study seeks to investigate the issues of teacher's perceptions and attitudes of teaching and learning to obtain implications toward learning-centred and collaborative mode. The theoretical foundations include andragogical conceptions (Knowles), roles of adult teachers (Brookfield), and conceptions of collaborative teaching and learning mode (Conti). The main sources of data are: the interviews and results of the questionnaire. Questionnaire responses from 70 teachers with knowledge of adult teaching and learning are described and interpreted. The general findings of the study are that the existing adult teaching practice at TITEMP does not adequately account for the principles of adult learning in a collaborative mode with adult students. Adult learning is teaching-centred. Some suggestions for further research are offered. It is hoped and believed that this research will contribute to a better understanding of Chinese adult teaching and learning in general, more particularly to the empirical study of the teachers from teaching and learning perspective in a Chinese adult higher learning setting. The research findings will be used as basis for the exploration of Chinese adult teaching.

Software engineering: methods, modeling and teaching

Since the emergence of software engineering in the late 1960's as a response to the software crisis, researchers throughout the world are trying to give theoretical support to this discipline. Several points of view have to be reviewed in order to complete this task. In the middle 70's Frederick Brooks Jr. coined the term "silver bullet" suggesting the solution to several problems rela-ted to software engineering and, hence, we adopted such a metaphor as a symbol for this book. Methods, modeling, and teaching are the insights reviewed in this book. Some work related to these topies is presented by software engineering researchers, led by Ivar Jacobson, one of the most remarkable researchers in this area. We hope our work will contribute to advance in giving the theoretieal support that software engineering needs.

Practical assessment on the run – iPads as an effective mobile and paperless tool in physical education and teaching

This paper investigates the use of iPads in the assessment of predominantly second year Bachelor of Education (Primary/Early Childhood) pre-service teachers undertaking a physical education and health unit. Within this unit, practical assessment tasks are graded by tutors in a variety of indoor and outdoor settings. The main barriers for the lecturer or tutor for effective assessment in these contexts include limited time to assess and the provision of explicit feedback for large numbers of students, complex assessment procedures, overwhelming record-keeping and assessing students without distracting from the performance being presented. The purpose of this pilot study was to investigate whether incorporating mobile technologies such as iPads to access online rubrics within the Blackboard environment would enhance and simplify the assessment process. Results from the findings indicate that using iPads to access online rubrics was successful in streamlining the assessment process because it provided pre-service teachers with immediate and explicit feedback. In addition, tutors experienced a reduction in the amount of time required for the same workload by allowing quicker forms of feedback via the iPad dictation function. These outcomes have future implications and potential for mobile paperless assessment in other disciplines such as health, environmental science and engineering.

Treatment of Aqueous Effluents Containing Phenol by the O(3), O(3)-UV, and O(3)-H(2)O(2) Processes: Experimental Study and Neural Network Modeling

In this work, the oxidation of the model pollutant phenol has been studied by means of the O(3), O(3)-UV, and O(3)-H(2)O(2) processes. Experiments were carried out in a fed-batch system to investigate the effects of initial dissolved organic carbon concentration, initial, ozone concentration in the gas phase, the presence or absence of UVC radiation, and initial hydrogen peroxide concentration. Experimental results were used in the modeling of the degradation processes by neural networks in order to simulate DOC-time profiles and evaluate the relative importance of process variables.

Sharing best practices in introducing and teaching ethics principles to public administration employees : research report

O projeto, financiado pelo Programa Aprendizagem ao Longo da Vida, decorreu entre 1 de agosto de 2011 e 31 de julho de 2013 e foi coordenado pelo Instituto de Administração Pública de Praga, tendo como parceiros a Escola de Economia e Direito de Berlim, a Escola Nacional de Administração Pública da Polónia e o INA, de Portugal. A coordenação portuguesa do estudo esteve a cargo da Prof. Doutora Helena Rato e da Dra. Matilde Gago, com a colaboração do Prof. Doutor César Madureira e da Dra. Margarida Quintela, ex investigadores do INA, atualmente na DGAEP.