Proposal of a method to clarify and enhance decision-making at the front-end of innovation

Decision-making at the front-end of innovation is critical for the success of companies. This paper presents a simple visual method, called DMCA (Decision-Making Criteria Assessment), which was created to clarify and improve decision-making at the front-end of innovation. The method maps the uncertainty of project information and importance of decision criteria, compiling a measure that indicates whether the decision is highly uncertain, what information interferes with it, and what criteria are actually being considered. The DMCA method was tested in two projects that faced decision-making issues, and the results confirm the benefits of using this method in decision-making at the front-end. © 2012 IEEE.

Decision making at the front end of innovation: The hidden influence of knowledge and decision criteria

Decision making at the front end of innovation is critical for the success of companies. This paper presents a method, called decision making based on knowledge (DeBK), which was created to analyze the decision-making process at the front end. The method evaluates the knowledge of project information and the importance of decision criteria, compiling a measure that indicates whether decisions are founded on available knowledge and what criteria are in fact being considered to delineate them. The potential contribution of DeBK is corroborated through two projects that faced decision-making issues at the front end of innovation. © 2014 RADMA and John Wiley & Sons Ltd.

The End(s) of the End of Poverty

This dissertation explores the emergence of Millennium Development and the promise to end poverty by 2015. After exploring the global scale phenomena, the project turns to the implementation of the "end of poverty" in the model Millennium Village of Sauri, Kenya.

Quality end-of-life care in long-term care facilities:Service providers' perspective

The goal of this project was to provide guidance on what constitutes quality end-of-life care in long-term care (LTC) facilities. Seventy-nine direct care providers from six LTC facilities participated in 12 focus groups. The focus group discussions examined what made the difference between a "good" death and a "bad" death, and what changes in LTC would improve the care of dying residents. Analyses of the focus group data revealed six themes that contribute to quality end-of-life care in LTC facilities: responding to resident needs, creating a homelike environment, supports for families, providing quality care processes, recognizing death as a significant event, and having sufficient institutional resources. These findings challenge policy makers and providers to consider how to normalize life and death in LTC facilities.

Utopia and its Discontents: Dreams of Catastrophe and the End of 'the End of History'

The institutionalization of Utopia Studies in the last decade is premised upon a specifically aesthetic reception of Ernst Bloch’s theory of the “utopian impulse” during the 1980s and 1990s. A postmodern uneasiness to both left and right formulations of the "End of History" during this period imposes a resistance to concepts of historical and political closure or totality, resulting in a "Utopianism without Utopia". For all the attractiveness of this pan-utopianism, its failure to consider the relation between historical representation and fulfillment renders it consummate with liberalism as a merely inverted conservatism. In contrast to this specific recuperation of a Bloch, the continuing importance of Walter Benjamin’s theory of the dialectical image and the speculative concept of historical experience which underlies it becomes apparent. The intrusion of the historical Absolute is coded throughout Benjamin’s thought as the eruptive and mortuary figure of catastrophe, which stands as the dialectical counterpart to the utopian wish images of the collective dream. Indeed, the motto under which the Arcades Project was to be constructed derives from Adorno: “Each epoch dreams of itself as annihilated by catastrophe”.

Terminal: a miracle play with popular music from the end of the world

Terminal: A Miracle Play with Popular Music from the End of the World is a film and live performance project exploring the politics of post-apocalyptic fiction. A theatrical staging of a morality play for end times and future folk music, it recasts eschatology, as a foundational myth for a future society. Post-apocalyptic writing and cinema are grounded in an ethos of survivalism. Invoking Rousseau’s state of nature, or time before government, these fictions propose violent scenarios in which nuclear holocaust, environmental catastrophe and other disasters generate an individualistic politics of pure pragmatism, negating the possibility of democratic deliberation. Terminal narrates this familiar scenario, but at the same time questions its validity. The film, shot on black and white VHS at Kurt Schwitters’ Merzbarn in Cumbria, dramatises a series of conversations between future-historical archetypes about the needs and pressures of the situation in which they find themselves at the end of the world. The performers then gather to play worshipful songs about acid rain, radiation sickness and eating the dog, using a mix of conventional, obscure and makeshift instruments In the tradition of books such as Russell Hoban’s Riddley Walker and Arthur M. Miller Jr.’s A Canticle for Liebowitz, Terminal imagines artistic expression and new folk traditions for a world to come after the apocalypse. If, as Slavoj Žižek would have it, it is easier to imagine the end of the world than to think of the end of capitalism, the project juxtaposes these two endpoints to test out how alternative scenarios might emerge from the collaborative practice of making theatre and music against a setting of social collapse.

Impacts of Climate Change and the End of Deforestation on Land Use in the Brazilian Legal Amazon

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Policy alternatives and strategies for the Plurinational State of Bolivia following the end of trade preferences

Include bibliography

Recycling of end of life concrete fines (0 - 4 mm) into silica and cement

The purpose of this work is to find a methodology in order to make possible the recycling of fines (0 - 4 mm) in the Construction and Demolition Waste (CDW) process. At the moment this fraction is a not desired by-product: it has high contaminant content, it has to be separated from the coarse fraction, because of its high water absorption which can affect the properties of the concrete. In fact, in some countries the use of fines recycled aggregates is highly restricted or even banned. This work is placed inside the European project C2CA (from Concrete to Cement and Clean Aggregates) and it has been held in the Faculty of Civil Engineering and Geosciences of the Technical University of Delft, in particular, in the laboratory of Resources And Recycling. This research proposes some procedures in order to close the loop of the entire recycling process. After the classification done by ADR (Advanced Dry Recovery) the two fractions "airknife" and "rotor" (that together constitute the fraction 0 - 4 mm) are inserted in a new machine that works at high temperatures. The temperatures analysed in this research are 600 °C and 750 °C, cause at that temperature it is supposed that the cement bounds become very weak. The final goal is "to clean" the coarse fraction (0,250 - 4 mm) from the cement still attached to the sand and try to concentrate the cement paste in the fraction 0 - 0,250 mm. This new set-up is able to dry the material in very few seconds, divide it into two fractions (the coarse one and the fine one) thanks to the air and increase the amount of fines (0 - 0,250 mm) promoting the attrition between the particles through a vibration device. The coarse fraction is then processed in a ball mill in order to improve the result and reach the final goal. Thanks to the high temperature it is possible to markedly reduce the milling time. The sand 0 - 2 mm, after being heated and milled is used to replace 100% of norm sand in mortar production. The results are very promising: the mortar made with recycled sand reaches an early strength, in fact the increment with respect to the mortar made with norm sand is 20% after three days and 7% after seven days. With this research it has been demonstrated that once the temperature is increased it is possible to obtain a clean coarse fraction (0,250 - 4 mm), free from cement paste that is concentrated in the fine fraction 0 - 0,250 mm. The milling time and the drying time can be largely reduced. The recycled sand shows better performance in terms of mechanical properties with respect to the natural one.

Modelling of the TICS Catalyse : Realization of a project

An action of modelling of the Territorial Intelligence Community Systems or TICS began in 2009 at the end of the CaEnti project. It has several objectives: - Establish a set of documents understandable by computer specialists who are in charge of software developments, and by territorial intelligence specialists. - Lay the foundation of a vocabulary describing the main notions of TICS domain. - Ensure the evolution and sustainability of tools and systems, in a highly scalable research context. The definition of models representing the data manipulated by the tools of the suitcase Catalyse is not sufficient to describe in a complete way the TICS domain. We established a correspondence between this computer vocabulary and vocabulary related to the theme to allow communication between computer scientists and territorial intelligence specialists. Furthermore it is necessary to describe the roles of TICS. For that it is interesting to use other kinds of computing models. In this communication we present the modelling of TICS project with business process

Modelling of the TICS Catalyse : Realization of a project

An action of modelling of the Territorial Intelligence Community Systems or TICS began in 2009 at the end of the CaEnti project. It has several objectives: - Establish a set of documents understandable by computer specialists who are in charge of software developments, and by territorial intelligence specialists. - Lay the foundation of a vocabulary describing the main notions of TICS domain. - Ensure the evolution and sustainability of tools and systems, in a highly scalable research context. The definition of models representing the data manipulated by the tools of the suitcase Catalyse is not sufficient to describe in a complete way the TICS domain. We established a correspondence between this computer vocabulary and vocabulary related to the theme to allow communication between computer scientists and territorial intelligence specialists. Furthermore it is necessary to describe the roles of TICS. For that it is interesting to use other kinds of computing models. In this communication we present the modelling of TICS project with business process

Modelling of the TICS Catalyse : Realization of a project

An action of modelling of the Territorial Intelligence Community Systems or TICS began in 2009 at the end of the CaEnti project. It has several objectives: - Establish a set of documents understandable by computer specialists who are in charge of software developments, and by territorial intelligence specialists. - Lay the foundation of a vocabulary describing the main notions of TICS domain. - Ensure the evolution and sustainability of tools and systems, in a highly scalable research context. The definition of models representing the data manipulated by the tools of the suitcase Catalyse is not sufficient to describe in a complete way the TICS domain. We established a correspondence between this computer vocabulary and vocabulary related to the theme to allow communication between computer scientists and territorial intelligence specialists. Furthermore it is necessary to describe the roles of TICS. For that it is interesting to use other kinds of computing models. In this communication we present the modelling of TICS project with business process

(Table 1) Sea-surface temperatures, intermediate-water temperatures, and latitudinal gradient at three time slices at the end of the Cretaceous

Climatic and oceanographic variations during the last 2 m.y. of the Maastrichtian inferred from high-resolution (10 k.y.) stable isotope analysis of the mid-latitude South Atlantic Deep Sea Drilling Project Site 525 reveal a major warm pulse followed by rapid cooling prior to the Cretaceous-Tertiary boundary. Between 66.85 and 65.52 Ma, cool but fluctuating temperatures average 9.9 and 15.4°C in intermediate and surface waters, respectively. This interval is followed by an abrupt short-term warming between 65.45 and 65.11 Ma, which increased temperatures by 2-3°C in intermediate waters, and decreased the vertical thermal gradient to an average of 2.7°C. This warm pulse may be linked to increased atmospheric pCO2, increased poleward heat transport, and the switch of an intermediate water source from high to low-middle latitudes. During the last 100 k.y. of the Maastrichtian, intermediate and surface temperatures decreased by an average of 2.1 and 1.4°C, respectively, compared to the maximum temperature between 65.32 and 65.24 Ma.

An universal system to de-orbit satellites at end of life

A 3-year Project financed by the European Commission is aimed at developing a universal system to de-orbit satellites at their end of life, as a fundamental contribution to limit the increase of debris in the Space environment. The operational system involves a conductive tapetether left bare to establish anodic contact with the ambient plasma as a giant Langmuir probe. The Project will size the three disparate dimensions of a tape for a selected de-orbit mission and determine scaling laws to allow system design for a general mission. Starting at the second year, mission selection is carried out while developing numerical codes to implement control laws on tether dynamics in/off the orbital plane; performing numerical simulations and plasma chamber measurements on tether-plasma interaction; and completing design of subsystems: electronejecting plasma contactor, power module, interface elements, deployment mechanism, and tether-tape/end-mass. This will be followed by subsystems manufacturing and by currentcollection, free-fall, and hypervelocity impact tests.

Rediscovery of the Moratalla amber (Murcia, Spain): a Cretaceous outcrop in the southernmost end of the peninsular amber strip

This study is a contribution of the Spanish Ministry of Economy and Competitiveness project CGL2011-23948/BTE.