Fair flow control of ABR service by per-VC virtual queuing

In this paper, a rate-based flow control scheme based upon per-VC virtual queuing is proposed for the Available Bit Rate (ABR) service in ATM. In this scheme, each VC in a shared buffer is assigned a virtual queue, which is a counter. To achieve a specific kind of fairness, an appropriate scheduler is applied to the virtual queues. Each VC's bottleneck rate (fair share) is derived from its virtual cell departure rate. This approach of deriving a VC's fair share is simple and accurate. By controlling each VC with respect to its virtual queue and queue build-up in the shared buffer, network congestion is avoided. The principle of the control scheme is first illustrated by max–min flow control, which is realised by scheduling the virtual queues in round-robin. Further application of the control scheme is demonstrated with the achievement of weighted fairness through weighted round robin scheduling. Simulation results show that with a simple computation, the proposed scheme achieves the desired fairness exactly and controls network congestion effectively.

Compensation for lost services of an employee : pure economic loss and per quod action

Under the common law an employer may take action against a defendant for the loss of an employee’s services due to the act of the defendant (per quod servitium amisit - by reason of which the services were lost). The High Court has recently affirmed the existence of this ancient tort in Barclay v Penberthy [2012] HCA 40.

PV string per-module maximum power point enabling converters

Many grid connected PV installations consist of a single series string of PV modules and a single DC-AC inverter. This efficiency of this topology can be enhanced with additional low power, low cost per panel converter modules. Most current flows directly in the series string which ensures high efficiency. However parallel Cúk or buck-boost DC-DC converters connected across each adjacent pair of modules now support any desired current difference between series connected PV modules. Each converter “shuffles” the desired difference in PV module currents between two modules and so on up the string. Spice simulations show that even with poor efficiency, these modules can make a significant improvement to the overall power which can be recovered from partially shaded PV strings.

Second-order elastic finite element analysis of steel structures using a single element per member

Finite element frame analysis programs targeted for design office application necessitate algorithms which can deliver reliable numerical convergence in a practical timeframe with comparable degrees of accuracy, and a highly desirable attribute is the use of a single element per member to reduce computational storage, as well as data preparation and the interpretation of the results. To this end, a higher-order finite element method including geometric non-linearity is addressed in the paper for the analysis of elastic frames for which a single element is used to model each member. The geometric non-linearity in the structure is handled using an updated Lagrangian formulation, which takes the effects of the large translations and rotations that occur at the joints into consideration by accumulating their nodal coordinates. Rigid body movements are eliminated from the local member load-displacement relationship for which the total secant stiffness is formulated for evaluating the large member deformations of an element. The influences of the axial force on the member stiffness and the changes in the member chord length are taken into account using a modified bowing function which is formulated in the total secant stiffness relationship, for which the coupling of the axial strain and flexural bowing is included. The accuracy and efficiency of the technique is verified by comparisons with a number of plane and spatial structures, whose structural response has been reported in independent studies.

Second-order elastic finite element analysis of structures using a single element per member

Finite element frame analysis programs targeted for design office application necessitate algorithms which can deliver reliable numerical convergence in a practical timeframe with comparable degrees of accuracy, and a highly desirable attribute is the use of a single element per member to reduce computational storage, as well as data preparation and the interpretation of the results. To this end, a higher-order finite element method including geometric non-linearity is addressed in the paper for the analysis of elastic frames for which a single element is used to model each member. The geometric non-linearity in the structure is handled using an updated Lagrangian formulation, which takes the effects of the large translations and rotations that occur at the joints into consideration by accumulating their nodal coordinates. Rigid body movements are eliminated from the local member load-displacement relationship for which the total secant stiffness is formulated for evaluating the large member deformations of an element. The influences of the axial force on the member stiffness and the changes in the member chord length are taken into account using a modified bowing function which is formulated in the total secant stiffness relationship, for which the coupling of the axial strain and flexural bowing is included.

Planes, trains, automobiles and the action per quod servitium amisit

The action per quod servitium amisit compensates an employer for the loss of an employee’s services, where such loss is caused due to the commission of a tort by a third party which injures the employee. Although not commonly pleaded, such actions often arise when employees are harmed due to transportation accidents. For example, where allowed, physical injury caused by the negligent driving of automobiles, and the psychiatric injury suffered by an engine driver upon averting a collision with a motorcyclist crossing before an oncoming train...

Wastewater analysis of Census day samples to investigate per capita input of organophosphorus flame retardants and plasticizers into wastewater

The use of organophosphate esters (PFRs) as flame retardants and plasticizers has increased due to the ban of some brominated flame retardants. There is however some concern regarding the toxicity, particularly carcinogenicity and neurotoxicity, of some of the PFRs. In this study we applied wastewater analysis to assess use of PFRs by the Australian population. Influent samples were collected from eleven wastewater treatment plants (STPs) in Australia on Census day and analysed for PFRs using gas chromatography coupled with mass spectrometry (GC-MS). Per capita mass loads of PFRs were calculated using the accurate Census head counts. The results indicate that tris(2-butoxyethyl) phosphate (TBOEP) has the highest per capita input into wastewater followed by tris(2-chloroisopropyl) phosphate (TCIPP), tris(isobutyl) phosphate (TIBP), tris(2-chloroethyl) phosphate (TCEP) and tris(1,3-dichloroisopropyl) phosphate (TDCIPP). Similar PFR profiles were observed across the Australian STPs and a comparison with European and U.S. STPs indicated similar PFR concentrations. We estimate that approximately 2.1 mg person−1 day−1 of PFRs are input into Australian wastewater which equates to 16 tonnes per annum.

Basic Needs and Much More With One Kilowatt Per Capita

Conventional thinkin g holds that increased energy consumption is a prerequisite for economic and social development. This belief, together With the prospect of dwindling global petroleum supplies and the high costs of expanding energy supply generally, lead many to believe that it is not feasible to improve living standards substantially in the developing countries. But by shifting to high-quality energy carriers and by exploiting cost-effective opportunities for more efficient energy use, it would be possible to satisfy basic human needs and to provide considerable further improvements in living standards without significantly increasing per-capita energy use above the present level.

More fertile florets and grains per spike can be achieved at higher temperature in wheat lines with high spike biomass and sugar content at booting

An understanding of processes regulating wheat floret and grain number at higher temperatures is required to better exploit genetic variation. In this study we tested the hypothesis that at higher temperatures, a reduction in floret fertility is associated with a decrease in soluble sugars and this response is exacerbated in genotypes low in water soluble carbohydrates (WSC). Four recombinant inbred lines contrasting for stem WSC were grown at 20/10 degrees C and 11 h photoperiod until terminal spikelet, and then continued in a factorial combination of 20/10 degrees C or 28/14 degrees C with 11 h or 16 h photoperiod until anthesis. Across environments, High WSC lines had more grains per spike associated with more florets per spike. The number of fertile florets was associated with spike biomass at booting and, by extension, with glucose amount, both higher in High WSC lines. At booting, High WSC lines had higher fixed C-13 and higher levels of expression of genes involved in photosynthesis and sucrose transport and lower in sucrose degradation compared with Low WSC lines. At higher temperature, the intrinsic rate of floret development rate before booting was slower in High WSC lines. Grain set declined with the intrinsic rate of floret development before booting, with an advantage for High WSC lines at 28/14 degrees C and 16 h. Genotypic and environmental action on floret fertility and grain set was summarised in a model.

Comparison of the pregnancy rates and costs per calf born after fixed-time artificial insemination or artificial insemination after estrus detection in Bos indicus heifers

This study compared pregnancy rates (PRs) and costs per calf born after fixed-time artificial insemination (FTAI) or AI after estrus detection (i.e., estrus detection and AI, EDAI), before and after a single PGF2α treatment in Bos indicus (Brahman-cross) heifers. On Day 0, the body weight, body condition score, and presence of a CL (46% of heifers) were determined. The heifers were then alternately allocated to one of two FTAI groups (FTAI-1, n = 139) and (FTAI-2, n = 141) and an EDAI group (n = 273). Heifers in the FTAI groups received an intravaginal progesterone-releasing device (IPRD; 0.78 g of progesterone) and 1 mg of estradiol benzoate intramuscularly (im) on Day 0. Eight days later, the IPRD was removed and heifers received 500 μg of PGF2α and 300 IU of eCG im; 24 hours later, they received 1 mg estradiol benzoate im and were submitted to FTAI 30 to 34 hours later (54 and 58 hours after IPRD removal). Heifers in the FTAI-2 group started treatment 8 days after those in the FTAI-1 group. Heifers in the EDAI group were inseminated approximately 12 hours after the detection of estrus between Days 4 and 9 at which time the heifers that had not been detected in estrus received 500 μg of PGF2α im and EDAI continued until Day 13. Heifers in the FTAI groups had a higher overall PR (proportion pregnant as per the entire group) than the EDAI group (34.6% vs. 23.2%; P = 0.003), however, conception rate (PR of heifers submitted for AI) tended to favor the estrus detection group (34.6% vs. 44.1%; P = 0.059). The cost per AI calf born was estimated to be $267.67 and $291.37 for the FTAI and EDAI groups, respectively. It was concluded that in Brahman heifers typical of those annually mated in northern Australia FTAI compared with EDAI increases the number of heifers pregnant and reduces the cost per calf born.

Application of Alexander Harris to be shochet at $5 per week

Digital image

Spotless decided per incuriam? - A contrary view

The article considers the implications of the decision of the High Court in Spotless Services Pty Ltd (1996) 141 ALR 92; 34 ATR 183. It argues in particular that the decision was made per incuriam.

Simulation of wavelength/time multiple-pulses-per-row fiber-optic CDMA network

Passive wavelength/time fiber-optic code division multiple access (WIT FO-CDMA) network is a viable option for highspeed access networks. Constructions of 2-D codes, suitable for incoherent WIT FO-CDMA, have been proposed to reduce the time spread of the 1-D sequences. The 2-D constructions can be broadly classified as 1) hybrid codes and 2) matrix codes. In our earlier work [141, we had proposed a new family of wavelength/time multiple-pulses-per-row (W/T MPR) matrix codes which have good cardinality, spectral efficiency and at the same time have the lowest off-peak autocorrelation and cross-correlation values equal to unity. In this paper we propose an architecture for a WIT MPR FO-CDAM network designed using the presently available devices and technology. A complete FO-CDMA network of ten users is simulated, for various number of simultaneous users and shown that 0 --> 1 errors can occur only when the number of interfering users is at least equal to the threshold value.

Wavelength/Time Multiple-Pulses-per-Row codes: Construction and verification

Two dimensional Optical Orthogonal Codes (OOCs) named Wavelength/Time Multiple-Pulses-per-Row (W/T MPR) codes suitable for use in incoherent fiber-optic code division multiple access (FO-CDMA) networks are reported in [6]. In this paper, we report the construction of W/T MPR codes, using Greedy Algorithm (GA), with distinct 1-D OOCs [1] as the row vectors. We present the W/T MPR codes obtained using the GA. Further, we verify the correlation properties of the generated W/T MPR codes using Matlab.

Zorros märke : Manligt identitetsbygge i Per Pettersons roman "Jeg forbanner tidens elv"

Avhandlingens syfte är att belysa hur porträtten av jagberättaren Arvid och hans mor växer fram i Per Pettersons roman Jeg forbanner tidens elv. Det paradigm jag utgår ifrån är det psykoanalytiska. Förutom texter av Sigmund Freud och Jacques Lacan stöder jag mig på texter av Peter Brooks och Terry Eagleton. För en tolkning av Arvids sätt att berätta sin historia använder jag mig av James Phelans tankar kring den opålitliga berättaren . Analysen bygger på en närläsning av romanen och några av de intertexter som förekommer i den. Av dessa är särskilt myten om kung Oidipus samt berättelsen om Zorro centrala för förståelsen av Arvids personlighet och hur den manliga identiteten byggs. Andra centrala intertexter som granskas närmare är Erich Maria Remarques roman Triumfbågen och Somerset Maughams roman Den vassa eggen. Porträttet av mor belyses indirekt via den funktion hon har i Arvids berättelse. Arvids porträtt analyseras ur två olika perspektiv. I uppsatsens första del, Romanbygget , undersöker jag hur romanen är uppbyggd och hur bilden av Arvid formas genom vad han berättar om sin mor, sitt liv, sin bakgrund och sina uppväxtår. Det perspektiv som Konung Oidipus i Freuds tolkning av det antika dramat ger, lyfter, som en nyckel in i romanen, fram dynamiken mellan Arvid, mor och den övriga familjen. I romanen dödas far i psykisk bemärkelse, han blir medvetet föraktad och förbisedd som manlig förebild och identifikationsobjekt. Arvids fixering vid mor gör att han ser sig själv med hennes ögon. Också bröderna får sin gestalt som rivaler i kampen om mor. I ljuset av den oidipala problematiken framhåller jag Arvids olösta relation till familjemedlemmarna som den avgörande orsaken till Arvids misslyckanden i livet och hans oförmåga att forma en fungerande och stabil vuxenidentitet. Men jag föreslår också en tidig, omedveten fadersidentifikation, symboliserad av Zorro och Zorros magiska märke, som i sublimeringen eventuellt finner sin lösning i en dröm om att bli författare. I uppsatsens andra del Berättarrösten undersöker jag Arvids sätt att berätta utgående ifrån Phelans tankar kring den opålitliga berättaren . Jag analyserar några centrala avsnitt i romanen med avseende på hur berättarröstens och den implicita författarens framställningar överensstämmer eller skiljer sig ifrån varandra. I min läsning är Arvid en komplext pålitlig och opålitlig berättare. Arvid framhåller i sin berättelse och i sina återblickar ett tillrättalagt och i någon mån förskönat porträtt av sig själv, en livslögn vars upplösning enligt min mening antyds i de avslutande kapitlen. För min förståelse av psykoanalysens teori och hur den kan tillämpas i litteraturforskningen är Ludwig Wittgensteins tankar om bildens användning centrala. I avsnittet om Zorro tar jag kortfattat upp frågan hur psykoanalytisk litteraturtolkning kan leda vilse i form av övertolkning, det vill säga att analysen övergår i fantasi. En annan möjlig felkälla som jag lyfter fram i analysen är att romanen tolkas av en svenskspråkig läsare som eventuellt läser in andra nyanser i den norska texten, än vad författaren avsett. Jag tar också upp frågan om Arvid i Pettersons tidigare produktion och huruvida det är frågan om en fortgående berättelse om Arvid Jansen under olika livsbetingelser. Mitt intryck är att det inte är fråga om ett enhetligt personporträtt utan olika frågeställningar som modelleras ur samma material.