91 resultados para Diluent
Resumo:
Low doses of gamma radiation were given to four different solvents containing C5-BTBP and CyMe4-BTBP, each molecule dissolved both in cyclohexanone and hexanol. Four corresponding solvents were kept unirradiated and used as references for the extraction experiments. Multiple samples were taken from both the irradiated solutions and the reference solutions at certain time intervals. The samples were used in extraction experiments with the radionuclides Am-241 and Eu-152. The protection against radiolysis of the extracting molecules by the diluent used for dissolution without adding a scavenger molecule was checked. The interplay between the diluent and the side group of the extracting molecule for protection against radiolysis was also studied by keeping the same type of core molecule for binding to the metal ions and varying the diluent and side group. The results were unexpected. The presence of a cyclic molecule as both a side group or diluent seems to keep the extraction of europium almost unaffected by radiolysis, while americium behaves differently from solvent to solvent. The diluent alone does not protect the extracting molecule. In some of the studied systems there is a distinct change in the extraction behaviour of Am between the irradiated and reference solutions, an effect that is however only present at the beginning of the experimental series. At later times the difference in distribution ratios between the irradiated and reference solution is constant. This phenomenon is found only when the side group and diluent are structurally dissimilar.
Resumo:
The synthesis and extraction of americium(III) and europium(III) from aqueous nitric acid solutions by the new BTBP ligands 6,6’-bis(5,5,7,7- tetramethyl-5,7-dihydrofuro[3,4-e]-1,2,4-triazin-3-yl)-2,2’-bipyridine (Cy5-O-Me4-BTBP), and 6,6’-bis(5,5,7,7-tetramethyl-5,7-dihydrothieno[3,4-e]-1,2,4-triazin-3-yl)- 2,2’-bipyridine (Cy5-S-Me4-BTBP) is described. The affinity for Am(III) and the selectivity for Am(III) over Eu(III) of Cy5-S-Me4-BTBP were generally higher than for Cy5-O-Me4-BTBP. For both ligands, the extraction of Am(III) and Eu(III) from 3 M HNO3 into 3 mM organic solutions varied with the diluent used. The highest distribution ratios and separation factors observed were in cyclohexanone and 2-methylcyclohexanone, respectively. For Cy5-S-Me4-BTBP, there is a strong correlation between the distribution ratio for Am(III) and the permittivity of the diluent used. With 1-octanol as the diluent, low distribution ratios (D(Am) < 1) were observed for Cy5-S-Me4-BTBP although this ligand extracts Am(III) selectively (SFAm/Eu = 16-46 from 1-4 M HNO3). For Cy5-S-Me4-BTBP, Am(III) is extracted as the disolvate. The distribution ratios for Am(III), and the separation factors for Am(III) over Eu(III) are both significantly higher for CyMe4-BTBP than they are for Cy5-O-Me4-BTBP and Cy5-S-Me4-BTBP in cyclohexanone. Changing the diluent from cyclohexanone to 2-methylcyclohexanone leads to a decrease in D(Am) but an increase in SFAm/Eu for Cy5-S-Me4-BTBP.
Resumo:
Growth profiles of two isolates of Salmonella enteritidis phage type (PT) 4 inoculated into either the albumen of whole shell eggs or into separated albumen were found to be markedly affected by the size of the inoculum and the composition of the medium used to suspend the cells prior to inoculation. Using our model with an inoculum of two cells, multiplication of the Salmonella was not seen in 93% of eggs held at 20 degreesC for 8 days. In approximately 7% of eggs, however, growth occurred during the 8 days of storage. If the inoculum equaled or exceeded 25 cells per egg when eggs were subsequently stored at 20 degreesC, or 250 cells per egg when eggs were stored at 30 degreesC, high levels of growth of Salmonella in the egg occurred significantly more frequently than when the inoculum was two cells. High levels of growth were also seen more frequently if the inoculum was suspended in buffered peptone water or maximal recovery diluent rather than in phosphate buffered saline. Growth of Salmonella in separated albumen occurred very infrequently (1.1% of samples) at low inoculum levels and did not become significant until the inoculum was 250 cells or greater. Growth in the albumen was unaffected by the composition of the suspending medium. Provided that the inoculum was approximately 2 cells per egg and the bacteria were suspended in PBS, observed growth profiles of S. enteritidis inoculated into the albumen of whole eggs resembled those in naturally contaminated eggs. (C) 2001 Elsevier Science B.V. All rights reserved.
Resumo:
The development of versatile bioactive surfaces able to emulate in vivo conditions is of enormous importance to the future of cell and tissue therapy. Tuning cell behaviour on two-dimensional surfaces so that the cells perform as if they were in a natural three-dimensional tissue represents a significant challenge, but one that must be met if the early promise of cell and tissue therapy is to be fully realised. Due to the inherent complexities involved in the manufacture of biomimetic three-dimensional substrates, the scaling up of engineered tissue-based therapies may be simpler if based upon proven two-dimensional culture systems. In this work, we developed new coating materials composed of the self-assembling peptide amphiphiles (PAs) C16G3RGD (RGD) and C16G3RGDS (RGDS) shown to control cell adhesion and tissue architecture while avoiding the use of serum. When mixed with the C16ETTES diluent PA at 13 : 87 (mol mol-1) ratio at 1.25 times 10-3 M, the bioactive {PAs} were shown to support optimal adhesion, maximal proliferation, and prolonged viability of human corneal stromal fibroblasts ({hCSFs)}, while improving the cell phenotype. These {PAs} also provided stable adhesive coatings on highly-hydrophobic surfaces composed of striated polytetrafluoroethylene ({PTFE)}, significantly enhancing proliferation of aligned cells and increasing the complexity of the produced tissue. The thickness and structure of this highly-organised tissue were similar to those observed in vivo, comprising aligned newly-deposited extracellular matrix. As such, the developed coatings can constitute a versatile biomaterial for applications in cell biology, tissue engineering, and regenerative medicine requiring serum-free conditions.
Resumo:
The liquid of the rind of green coconut (LCCV), an effluent stream from the industrial processing of green coconut rind, is rich in sugars and is a suitable feedstock for fermentation. The first step of this study was to evaluate the potential of natural fermentation of LCCV. As the literature did not provide any information about LCCV and due to the difficulty of working with such an organic effluent, the second step was to characterize the LCCV and to develop a synthetic medium to explore its potential as a bioprocess diluent. The third step was to evaluate the influence of initial condensed and hydrolysable tannins on alcoholic fermentation. The last step of this work was divided into several stages: in particular to evaluate (1) the influence of the inoculum, temperature and agitation on the fermentation process, (2) the carbon source and the use of LCCV as diluent, (3) the differences between natural and synthetic fermentation of LCCV, in order to determine the best process conditions. Characterization of LCCV included analyses of the physico-chemical properties as well as the content of DQO, DBO and series of solids. Fermentation was carried out in bench-scale bioreactors using Saccharomyces cerevisiae as inoculum, at a working volume of 5L and using 0.30% of soy oil as antifoam. During fermentations, the effects of different initial sugars concentrations (10 - 20%), yeast concentrations (5 and 7.5%), temperatures (30 - 50°C) and agitation rates (400 and 500 rpm) on pH/sugars profiles and ethanol production were evaluated. The characterization of LCCV demonstrated the complexity and variability of the liquid. The best conditions for ethanol conversion were (1) media containing 15% of sugar; (2) 7.5% yeast inoculum; (3) temperature set point of 40°C and (4) an agitation rate of 500 rpm, which resulted in an ethanol conversion rate of 98% after 6 hours of process. A statistical comparison of results from natural and synthetic fermentation of LCCV showed that both processes are similar
Resumo:
Results are presented and discussed of an experimental investigation on acetylene turbulent dual jet diffusion flames. The study includes parameters of flames in parallel, divergent and convergent configurations. Tests with two parallel jets with addition of helium in the fuel stream were also performed and analysed. The variation of overall flame length and of other name physical characteristics, such as width, volume and conditions for lifting, are presented as functions of burner tip Reynolds number, jet distance from each other and inclination angle. The effects of diluent concentration in the fuel gas stream are presented for single and two parallel jets. (C) 1999 Elsevier B.V. Ltd.
Resumo:
This study aimed to apply, thermogravimetriy /derivative Thermogravimetriy (TG/DTG), differential scanning calorimetry (DSC), Differential Thermal Analysis (DTA), to conduct a comparative study on drug reference, generic and whose active principles are similar captopril hydrochlorothiazide, ampicillin, paracetamol, aspirin and mebendazole sold in local pharmacies. Samples of the active ingredients and dosage forms were also characterized by absorption infrared spectroscopy (IR), X-ray diffraction (XRD) and microscopy scanning electron (SEM). The TG / DTG curves showed a general similarity in the thermal behavior of the samples, but also showed the influence of excipients on the thermal stability. The DSC curve of the generic base hydrochlorothiazide showed no peak on the fusion of the drug due to interference of lactose as a diluent, which causes interaction with the active principle causing their degradation before the merger. The DSC curves of the drugs consisting of paracetamol showed reproducibility at the melting point of the active and the other thermal events. The DSC result of binary mixtures involving captopril / magnesium stearate and mebendazole/magnesium stearate showed possible interactions or incompatibilities evidenced by the displacement of the melting point of both drugs. The other mixtures showed no change. The infrared spectra presented were very similar, indicating the presence of functional groups characteristic of the constituents of the samples. The X-ray diffraction showed peaks indicative of crystalline structure of the active ingredients as well as some of the ingredients in the formulation of the drug and the micrographs indicate a general heterogeneity in the size distribution of particles in the samples
Resumo:
The objective of this study was to determine whether replacing the egg yolk with soybean lecithin in the Botu-Crio (R) cryodiluent would maintain the fertility of cryopreserved stallion sperm. Two experiments were performed to evaluate cell freezability. In experiment 1, sperm from 15 stallions were frozen in Botu-Crio (R) (BC) or Botu-Crio (R) which contained 45 g/L soybean lecithin (BCLS45) in place of the egg yolk. In experiment 2, we compared different concentrations of soybean lecithin: 0, 10.0, 12.5, 15.0, 17.5 and 20.0 g/L (BC, BCLS10, BCLS12.5, BCLS17.5 and BCLS20, respectively). In experiment 1, sperm frozen in BC and BCLS45 exhibited similar (P > 0.05) percentages of total motile sperm (61% and 61%, respectively); progressively motile sperm (27% and 27%, respectively) and sperm with intact plasma membranes (IMP; 53% and 57%, respectively). Similarly, sperm frozen in BC or BC containing any concentration of soybean lecithin maintained similar (P > 0.05) percentages of total motile sperm (61-68%) and progressively motile sperm (27-31%). In the first fertility trial, we used cryopreserved semen from a single stallion was inseminated into mares. The semen from the sperm that were frozen in BC diluent resulted in a higher fertility rate (66%, 16/24) compared to the sperm that were frozen in BCLS45 diluent (17%, 5/29; P < 0.01). Similarly, in a second fertility trial, the mares that were inseminated with the sperm that were frozen in BC diluent exhibited a higher fertility rate (66%, 16/24) compared to the mares that were inseminated with the sperm that were frozen in BCLS20 (40%, 10/25; Pc 0.05). Finally, in a third trial, the sperm that were frozen in BC resulted in a higher fertility rate in mares (75%, 18/24) compared to the sperm that were frozen in BCLS10 (41%, 10/24; P < 0.05). Although replacing the egg yolk in the BC cryodiluent with soybean lecithin provided similar laboratory results for stallion sperm, after cryopreservation, the sperm that was frozen with soybean lecithin in the diluent correlated with lower fertility rates. Based on these results, we concluded that the use of BCLS can be used as an alternative diluent for cryopreserving stallion sperm. However, the resulting reduced fertility rate is a matter of concern. Further studies are necessary to clarify the reasons for this decrease in fertility and to determine the optimal lecithin concentration for diluents to freeze stallion sperm. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Estudaram-se os efeitos do óxido nitroso (N2O) sobre a concentração alveolar mínima (CAM) do desfluorano. Trinta cães foram distribuídos em dois grupos: desfluorano (GD) e N2O e desfluorano (GDN). Os do GD receberam propofol (8,9±1,65mg/kg) para intubação orotraqueal e após, 11,5V% de desfluorano em 100% de O2. Após 30 minutos, os animais receberam estímulo elétrico e não havendo reação do animal, reduziu-se a concentração em 1,5V%. Repetiu-se o protocolo a cada 15 minutos, cessando-se os estímulos quando observada reação voluntária. Os GDN foram submetidos ao mesmo protocolo, substituindo-se o fluxo diluente por 30% O2 e 70% N2O. Mensuraram-se freqüências cardíaca (FC) e respiratória (FR), pressões arteriais sistólica, diastólica e média (PAS, PAD e PAM), concentração de dióxido de carbono ao final da expiração (ETCO2), saturação de oxihemoglobina (SpO2), temperatura corpórea (TC) e a CAM do desfluorano. Observou-se aumento da FC, ETCO2 e SpO2, e redução da FR e da TC concomitantemente à administração da maior dose de desfluorano, além de redução da CAM do desfluorano. As pressões arteriais diminuíram em M30 aumentando posteriormente. Concluiu-se que o N2O associado ao desfluorano reduz em 16% a CAM do anestésico volátil. Além disso, essa associação promoveu aumento da FC e depressão respiratória.
Resumo:
Background and Objectives. A combination of epidural and general anesthesia has been widely used to attenuate the surgical stress response and to provide postoperative analgesia. This case report illustrates the use of this anesthetic technique. Analgesia was induced with local anesthetic in the immediate postoperative period using unintentional 19.1% potassium chloride (KCI) as diluent. Methods. An ASA I male patient was scheduled for surgical correction of idiopathic megaesophagus under continuous epidural anesthesia combined with general anesthesia. In the postoperative period, while preparing 10 mt 0.125% bupivacaine to be administered through the epidural catheter for pain control, 5 mt 19.1% KCI was unintentionally used as diluent, resulting in a 9.55% potassium solution concentration. Results. The patient developed warmness of the lower limbs, tachycardia, hypertension, intense pruritus on the chest, agitation, exacerbation of sensory and motor blocks, and respiratory failure secondary to pulmonary edema, requiring ventilatory support. Total recovery was observed after 24 hours. Conclusions. Epidurally injected potassium leads to severe clinical manifestations caused by autonomic dysfunction, spinal cord irritation, and possible release of histamine. Despite continuous recommendations, ampule misidentification still happens in hospitals, frequently leading to serious accidents.
Resumo:
The technique of isotope dilution has been extensively utilized for determining the content of trace elements in geological samples; it has been especially useful for the determination of 238U and 234U contents in crustal materials with measurements made by alpha spectrometry. 232U-228Th has usually been used as diluent (spike) during the application of this analytical technique. More recently, 236U and 229Th have been used. Some methodological problems concerning the utilization of these spikes are presented with examples of experimental data obtained in analyses of groundwater and borehole spoil samples from Morro do Ferro, Pocos de Caldas (MG). -from English summary
Resumo:
Objective: To assess the effect of growth hormone (GH) on myocardial remodeling in infarcted rats. Methods: This study comprised 24 Wistar rats divided into 3 groups as follows: 1) AMI-GH group - comprising 8 rats that underwent infarction and were treated with GH; 2) AMI group - comprising 8 rats that underwent infarction and received only the diluent of the GH solution; and 3) control group (C group) - comprising 8 rats that underwent simulated infarction. After 30 days, the animals underwent functional study through echocardiography, and the changes in myocardial contractility of the isolated left ventricular (LV) papillary muscle were studied. Results: The echocardiography identified an increase in the diastolic (C=7.32±0.49; AMI=8.50±0.73; AMI-GH=9.34±0.73; P<0.05) and systolic (C=3.38±0.47, AMI=5.16±1.24; AMI-GH=5.96±1.54; P<0.05) diameters (mm) in the LV of the infarcted animals. The AMI-GH group animals had a lower ejection fraction (%) (C=0.9±0.03; AMI=0.76±0.12; AMI-GH=0.72± 0.14; P<0.05 for C vs AMI-GH) compared with those in controls. The study of the isolated left ventricular papillary muscle showed that the AMI-GH group had changes (C=1.50±0.59; AMI= 1.28±0.38; AMI-GH=1.98±0.41; P<0.05 for C vs AMI-GH) only in the tension at rest (TR - g/mm2) and in the time delta for a 50% decrease in the tension developed (TR50, ms) after stimulation with calcium (C=23.75±9.16; AMI=-16.56±14.82; AMI-GH=-4.69±8.39; P<0.05 for C vs AMI-GH) and in the delta of tension developed (TD, g/mm2) after stimulation with isoproterenol (C=0.99±0.17; AMI=0.54±0.62; AMI-GH=0.08±0.75; P<0.05 for C vs AMI-GH) compared with those in control animals. Conclusion: The early administration of GH in the experimental infarction model in rats may result in adverse effects on the process of ventricular remodeling.
Resumo:
The purpose of the present study was to evaluate the antimicrobial activity of propolis extracts diluted in different solvents against bacteria from Staphylococcus genus. The study was performed in the Immunology and Microbiology Laboratory from Universidade Federal do Vale do São Francisco. The propolis extracts were prepared using brown propolis diluted in different solvents such as chloroform, methanol, ethyl acetate and grain alcohol. In order to determine the antimicrobial potential of extracts, agar well diffusion method was used, with controls for each diluent. After that, Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) methods were used. All tests were performed in triplicate. In the agar well diffusion test, the measurements of the inhibition zone for propolis extract were as follows: grain alcohol and propolis (2.88mm), methanol and propolis (2.41mm), chloroform and propolis (2.40mm) and ethyl acetate and propolis (0.83mm). The MBC of propolis extracts in different solvents were 93.75 μg/mL for grain alcohol, 375 μg/mL for chloroform and methanol and 3,000 μg/ml for ethyl acetate. Statistically significant differences were achieved comparing the inhibition zones of propolis diluted in grain alcohol and ethyl acetate (2.88 and 0.83 mm, respectively). Considering the low cost of therapy and the activity of the propolis against caprine mastitis pathogens, other studies regarding in vivo activity and chemical characterization are necessary, in addition to evaluation of the toxicological aspects of propolis extracts.