Measurement of the mass difference between top and anti-top quarks in pp collisions at View the MathML √s=7 TeV using the ATLAS detector

A measurement of the mass difference between top and anti-top quarks is presented. In a 4.7 fb−14.7 fb−1 data sample of proton–proton collisions at View the MathML sources=7 TeV recorded with the ATLAS detector at the LHC, events consistent with View the MathML sourcett¯ production and decay into a single charged lepton final state are reconstructed. For each event, the mass difference between the top and anti-top quark candidate is calculated. A two b -tag requirement is used in order to reduce the background contribution. A maximum likelihood fit to these per-event mass differences yields View the MathML sourceΔm≡mt−mt¯=0.67±0.61(stat)±0.41(syst) GeV, consistent with CPT invariance.

Comprendre et maîtriser le passage de type I à type II de puits quantiques d'In(x)Ga(1-x)As(y)Sb(1-y) sur substrat de GaSb

Les antimoniures sont des semi-conducteurs III-V prometteurs pour le développement de dispositifs optoélectroniques puisqu'ils ont une grande mobilité d'électrons, une large gamme spectrale d'émission ou de détection et offrent la possibilité de former des hétérostructures confinées dont la recombinaison est de type I, II ou III. Bien qu'il existe plusieurs publications sur la fabrication de dispositifs utilisant un alliage d'In(x)Ga(1-x)As(y)Sb(1-y) qui émet ou détecte à une certaine longueur d'onde, les détails, à savoir comment sont déterminés les compositions et surtout les alignements de bande, sont rarement explicites. Très peu d'études fondamentales sur l'incorporation d'indium et d'arsenic sous forme de tétramères lors de l'épitaxie par jets moléculaires existent, et les méthodes afin de déterminer l'alignement des bandes des binaires qui composent ces alliages donnent des résultats variables. Un modèle a été construit et a permis de prédire l'alignement des bandes énergétiques des alliages d'In(x)Ga(1-x)As(y)Sb(1-y) avec celles du GaSb pour l'ensemble des compositions possibles. Ce modèle tient compte des effets thermiques, des contraintes élastiques et peut aussi inclure le confinement pour des puits quantiques. De cette manière, il est possible de prédire la transition de type de recombinaison en fonction de la composition. Il est aussi montré que l'indium ségrègue en surface lors de la croissance par épitaxie par jets moléculaires d'In(x)Ga(1-x)Sb sur GaSb, ce qui avait déjà été observé pour ce type de matériau. Il est possible d'éliminer le gradient de composition à cette interface en mouillant la surface d'indium avant la croissance de l'alliage. L'épaisseur d'indium en surface dépend de la température et peut être évaluée par un modèle simple simulant la ségrégation. Dans le cas d'un puits quantique, il y aura une seconde interface GaSb sur In(x)Ga(1-x)Sb où l'indium de surface ira s'incorporer. La croissance de quelques monocouches de GaSb à basse température immédiatement après la croissance de l'alliage permet d'incorporer rapidement ces atomes d'indium et de garder la seconde interface abrupte. Lorsque la composition d'indium ne change plus dans la couche, cette composition correspond au rapport de flux d'atomes d'indium sur celui des éléments III. L'arsenic, dont la source fournit principalement des tétramères, ne s'incorpore pas de la même manière. Les tétramères occupent deux sites en surface et doivent interagir par paire afin de créer des dimères d'arsenic. Ces derniers pourront alors être incorporés dans l'alliage. Un modèle de cinétique de surface a été élaboré afin de rendre compte de la diminution d'incorporation d'arsenic en augmentant le rapport V/III pour une composition nominale d'arsenic fixe dans l'In(x)Ga(1-x)As(y)Sb(1-y). Ce résultat s'explique par le fait que les réactions de deuxième ordre dans la décomposition des tétramères d'arsenic ralentissent considérablement la réaction d'incorporation et permettent à l'antimoine d'occuper majoritairement la surface. Cette observation montre qu'il est préférable d'utiliser une source de dimères d'arsenic, plutôt que de tétramères, afin de mieux contrôler la composition d'arsenic dans la couche. Des puits quantiques d'In(x)Ga(1-x)As(y)Sb(1-y) sur GaSb ont été fabriqués et caractérisés optiquement afin d'observer le passage de recombinaison de type I à type II. Cependant, celui-ci n'a pas pu être observé puisque les spectres étaient dominés par un niveau énergétique dans le GaSb dont la source n'a pu être identifiée. Un problème dans la source de gallium pourrait être à l'origine de ce défaut et la résolution de ce problème est essentielle à la continuité de ces travaux.

Comprendre et maîtriser le passage de type I à type II de puits quantiques d'In(x)Ga(1-x)As(y)Sb(1-y) sur substrat de GaSb

Les antimoniures sont des semi-conducteurs III-V prometteurs pour le développement de dispositifs optoélectroniques puisqu'ils ont une grande mobilité d'électrons, une large gamme spectrale d'émission ou de détection et offrent la possibilité de former des hétérostructures confinées dont la recombinaison est de type I, II ou III. Bien qu'il existe plusieurs publications sur la fabrication de dispositifs utilisant un alliage d'In(x)Ga(1-x)As(y)Sb(1-y) qui émet ou détecte à une certaine longueur d'onde, les détails, à savoir comment sont déterminés les compositions et surtout les alignements de bande, sont rarement explicites. Très peu d'études fondamentales sur l'incorporation d'indium et d'arsenic sous forme de tétramères lors de l'épitaxie par jets moléculaires existent, et les méthodes afin de déterminer l'alignement des bandes des binaires qui composent ces alliages donnent des résultats variables. Un modèle a été construit et a permis de prédire l'alignement des bandes énergétiques des alliages d'In(x)Ga(1-x)As(y)Sb(1-y) avec celles du GaSb pour l'ensemble des compositions possibles. Ce modèle tient compte des effets thermiques, des contraintes élastiques et peut aussi inclure le confinement pour des puits quantiques. De cette manière, il est possible de prédire la transition de type de recombinaison en fonction de la composition. Il est aussi montré que l'indium ségrègue en surface lors de la croissance par épitaxie par jets moléculaires d'In(x)Ga(1-x)Sb sur GaSb, ce qui avait déjà été observé pour ce type de matériau. Il est possible d'éliminer le gradient de composition à cette interface en mouillant la surface d'indium avant la croissance de l'alliage. L'épaisseur d'indium en surface dépend de la température et peut être évaluée par un modèle simple simulant la ségrégation. Dans le cas d'un puits quantique, il y aura une seconde interface GaSb sur In(x)Ga(1-x)Sb où l'indium de surface ira s'incorporer. La croissance de quelques monocouches de GaSb à basse température immédiatement après la croissance de l'alliage permet d'incorporer rapidement ces atomes d'indium et de garder la seconde interface abrupte. Lorsque la composition d'indium ne change plus dans la couche, cette composition correspond au rapport de flux d'atomes d'indium sur celui des éléments III. L'arsenic, dont la source fournit principalement des tétramères, ne s'incorpore pas de la même manière. Les tétramères occupent deux sites en surface et doivent interagir par paire afin de créer des dimères d'arsenic. Ces derniers pourront alors être incorporés dans l'alliage. Un modèle de cinétique de surface a été élaboré afin de rendre compte de la diminution d'incorporation d'arsenic en augmentant le rapport V/III pour une composition nominale d'arsenic fixe dans l'In(x)Ga(1-x)As(y)Sb(1-y). Ce résultat s'explique par le fait que les réactions de deuxième ordre dans la décomposition des tétramères d'arsenic ralentissent considérablement la réaction d'incorporation et permettent à l'antimoine d'occuper majoritairement la surface. Cette observation montre qu'il est préférable d'utiliser une source de dimères d'arsenic, plutôt que de tétramères, afin de mieux contrôler la composition d'arsenic dans la couche. Des puits quantiques d'In(x)Ga(1-x)As(y)Sb(1-y) sur GaSb ont été fabriqués et caractérisés optiquement afin d'observer le passage de recombinaison de type I à type II. Cependant, celui-ci n'a pas pu être observé puisque les spectres étaient dominés par un niveau énergétique dans le GaSb dont la source n'a pu être identifiée. Un problème dans la source de gallium pourrait être à l'origine de ce défaut et la résolution de ce problème est essentielle à la continuité de ces travaux.

Reproductive behavioural differences between wild-caught and pond-reared Penaeus monodon prawn broodstock

Ongoing problems exist with the commercial scale domestication of Penaeus monodon. One of the major issues, in terms of reproductive performance, is the low egg hatch rate of eggs from these captive bred prawns. The current study investigated the related issue of mating success. Time lapse video observations were conducted to compare the mating behaviour of pond-reared (domesticated) and wild-caught prawn P. monodon broodstock. Mating success of the pond-reared prawns was found to be low relative to wild-caught. It was determined that both male and female prawns contributed to this low mating rate suggesting both genders were impacted negatively by the domestication process. The causative factors for the low mating success are yet to be determined, however external physical abnormalities and lack of sexual maturity did not appear to play a role. The most notable behavioural difference between wild-caught and domesticated prawns was a reduced level of pursuit behaviour by domesticated males. This and other behavioural differences are discussed in relation to an increasing body of evidence that male prawns respond to sex pheromones produced by receptive females and that males detect these chemical signals in part, via their second antennal flagella. Accordingly we hypothesise that pond-reared (domesticated) females may have a reduced ability to produce or release sex pheromones and males, a reduced ability to detect them when compared to their wild-caught counterparts.

The association between body composition and arterial stiffness in peri-pubescent children

The objective of this study was to examine the association between body composition and arterial stiffuess in peri-pubescent boys and girls. Differences in arterial distensibility were measured in 68 children (45 normal weight, 12 overweight, and 11 obese) between the ages of9 to 12 years. Weight classification was based on age and gender-specific body mass index cut-offs, while pubertal maturation was self-reported using Tanner staging. Distensibility was determined using two-dimensional, B-Mode echo Doppler ultrasound to measure changes at the right common carotid artery (CCA) diameter changes, while carotid pulse pressure (cPP) was measured at the left CCA by applanation tonometry. One-way ANOV A analysis revealed significant differences (p<0.001) in all anthropometric measures between the normal weight and overweight children, as well as the normal weight and obese children. Body stature was only higher in obese children compared to normal weight children (p<0.01). No significant differences were found between groups regarding age or Tanner stage. Common carotid artery distensibility showed a significant difference (p<0.01) between normal weight children (0.008 ± 0.002 mmHg-1 ) compared to obese children (0.005 ± 0.002 mmHg-1 ), with a borderline significant difference between the normal and overweight subjects (p=0.06). There was no significant effect for gender between males and females across all independent variables. The strongest determinants of distensibility in children were cPP (r= -0.52, pand sum of 4 skinfold thickness (r= -0.40, pysis revealed that cPP alone explained 27% of the variance in distensibility in children. In addition, cPP, diameter difference, systolic and diastolic diameter, as well as waist-to-hip ratio explained 94% of the variance among peri-pubescent children. This study greatly underscores the need for weight management for long-term prevention of cardiovascular disease in overweight and obese children.

An investigation into differences between indoleacetic acid and fusicoccin in their influence on RNA synthesis, protein synthesis and growth in Avena coleoptile tissue

Growth stimulation of Avena coleoptile tissue by indoleacetic acid (IAA) and fusicoccin (FC) was compared by measuring both their influence on RNA and protein synthesis during IAA or FC stimulated growth. FC stimulated growth more than IAA during the initial four hour exposure, after which the growth rate gradually declined to the control rate. FC, but not IAA, increased the uptake of 3H-Ieucine into tissue and the specific radioactivity of extracted protein. Cycloheximide inhibited the incorporation of 3H-Ieucine into protein by approximately 60% to 70% in all cases. In the presence of cycloheximide 3H-radioactivity accumulated in FC-treated tissue, whereas IAA did not seem to influence 3H-accumulation. These results suggest that FC stimulated leucine uptake into the tissue and that increased specific activity of coleoptile protein is due to increased leucine uptake, not an increased rate of protein synthesis. There was no measurable influence of IAA and/or FC on RNA and protein synthesis during the initial hours of a growth stimulation. Inhibitors of RNA and protein synthesis, actinomycin D and cycloheximide, respectively, severely inhibited IAA enhanced growth but only partially inhibited FC stimulated growth. The data are consistent with suggestions that a rapidly turning over protein participates in IAA stimulated growth, and that a continual synthesis of RNA and proteins is an absolute requirement for a long term growth response to IAA. On the contrary, FC-stimulated growth exhibited less dependency on the transcription and translation processes. The data are consistent with proposals suggesting different sites of action for FC and IAA stimulated growth. l?hen compared to CO2-free air, CO2 at 300 ppm had no significant influence on coleoptile growth and protein synthesis in the presence or absence of lAA or FC. Also, I mM malate, pH 6.0 did not influence growth of coleoptiles in the presence or absence of lAA. This result was obtained despite reports indicating that 300 ppm CO2 or I mM malate stimulates growth and protein synthesis. This lack of difference between CO2-treated and untreated tissue could indicate either that the interstitial space CO2 concentration is not actually different in the two treatments due to significant endogenous respiratory CO2 or else the data would suggest a very loose coupling between dark CO2 fixation and growth. IAA stimulated the in vivo fixation of 14c-bicarbonate (NaHI4c03) by about 25% and the addition of cycloheximide caused an inhibition of bicarbonate fixation within 30 min. Cycloheximide has also been reported to inhibit IAA-stimulated H+ excretion. These data are consistent with the acid growth theory and suggest that lAA stimulated growth involves dark CO2 fixation. The roles of dark CO2 fixation in lAA-stimulated growth are discussed.

Limit between stages I and II of a seed imbibition curve

O conhecimento das fases de absorção de água das diferentes espécies é importante em pesquisas objetivando melhorar a qualidade das sementes, utilizando tratamentos como condicionamento osmótico, pré-hidratação e uso de bioreguladores. O objetivo do presente trabalho foi estabelecer uma metodologia para determinar o limite entre a primeira e a segunda fase do processo, considerando o modelo W = f(t) - (a - w0)exp(-kt), utilizando testes estatísticos. O limite entre as duas primeiras fases do processo de absorção de água pelas sementes, foi determinado utilizando-se a distribuição assintótica de uma função de estimadores. O ponto a partir do qual esta diferença (W*) deixa de ser significativa foi determinado utilizando-se o teste estatístico T de Student. Para os dados utilizados como exemplo, tem-se o modelo ou =(0,434 + 0,00162 t) - (0,434 - w o)exp(-0,121 t), com r² = 0,98 e W* = (0,434 - w o) exp(-0,121 t). O valor de t encontrado (27,2 horas) é menor do que o valor determinado, considerando-se como critério para mudança de fase a diferença de 1% entre a assíntota e o valor estimado pelo modelo ajustado. Essa diferença de duas horas corresponde a 0,28% de água absorvida.

Influence of neuromuscular fatigue on co-contraction between vastus medialis and vastus lateralis during isometric contractions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Functional and morphometric differences between the early and delayed use of phototherapy in crushed median nerves of rats

This study evaluated the functional and quantitative differences between the early and delayed use of phototherapy in crushed median nerves. After a crush injury, low-level laser therapy (GaAs) was applied transcutaneously at the injury site, 3 min daily, with a frequency of five treatments per week for 2 weeks. In the early group, the first laser treatment started immediately after surgery, and in the delayed group, after 7 days. The grasping test was used for functional evaluation of the median nerve, before, 10, and 21 days after surgery, when the rats were killed. Three segments of the median nerve were analyzed histomorphometrically by light microscopy and computer analysis. The following features were observed: myelinated fiber and axon diameters, myelin sheath area, g-ratio, density and number of myelinated fibers, and area and number of capillaries. In the proximal segment (site of crush), the nerves of animals submitted to early and delayed treatment showed myelinated fiber diameter and myelin sheath area significantly larger compared to the untreated group. In the distal segment, the myelin sheath area was significantly smaller in the untreated animals compared to the delayed group. The untreated, early, and delayed groups presented a 50, 57, and 81% degree of functional recovery, respectively, at 21 days after injury, with a significant difference between the untreated and delayed groups. The results suggest that the nerves irradiated with low-power laser exhibit myelinated fibers of greater diameter and a better recovery of function.

A study of the relationship between physical activity and cardiovascular fitness and coronary heart disease risk factors in female adolescents

The association of measures of physical activity with coronary heart disease (CHD) risk factors in children, especially those for atherosclerosis, is unknown. The purpose of this study was to determine the association of physical activity and cardiovascular fitness with blood lipids and lipoproteins in pre-adolescent and adolescent girls.^ The study population was comprised of 131 girls aged 9 to 16 years who participated in the Children's Nutrition Research Center's Adolescent Study. The dependent variables, blood lipids and lipoproteins, were measured by standard techniques. The independent variables were physical activity measured as the difference between total energy expenditure (TEE) and basal metabolic rate (BMR), and cardiovascular fitness, VO$\rm\sb{2max}$(ml/min/kg). TEE was measured by the doubly-labeled water (DLW) method, and BMR by whole-room calorimetry. Cardiovascular fitness, VO$\rm\sb{2max}$(ml/min/kg), was measured on a motorized treadmill. The potential confounding variables were sexual maturation (Tanner breast stage), ethnic group, body fat percent, and dietary variables. A systematic strategy for data analysis was used to isolate the effects of physical activity and cardiovascular fitness on blood lipids, beginning with assessment of confounding and interaction. Next, from regression models predicting each blood lipid and controlling for covariables, hypotheses were evaluated by the direction and value of the coefficients for physical activity and cardiovascular fitness.^ The main result was that cardiovascular fitness appeared to be more strongly associated with blood lipids than physical activity. An interaction between cardiovascular fitness and sexual maturation indicated that the effect of cardiovascular fitness on most blood lipids was dependent on the stage of sexual maturation.^ A difference of 760 kcal/d physical activity (which represents the difference between the 25th and 75th percentile of physical activity) was associated with negligible differences in blood lipids. In contrast, a difference in 10 ml/min/kg of VO$\rm\sb{2max}$ or cardiovascular fitness (which represents the difference between the 25th and 75th percentile in cardiovascular fitness) in the early stages of sexual maturation was associated with an average positive difference of 15 mg/100 ml ApoA-1 and 10 mg/100 ml HDL-C. ^

Micro-mechanical stages with enhanced range

We present concepts and an optimization-based methodology for the design of micro-mechanical stages that have not only high precision but also an enhanced range. Joint-free distributed compliant designs provide high precision and easy manufacturability at macro and micro scales. The range of motion is enhanced by using displacement-amplifying compliant mechanisms (DaCMs). The main issue addressed in this paper is how to retain the decoupling between the X and Y motions in the stage when it is equipped with DaCMs. The natural frequency of the stage is also not compromised in enhancing the range. The optimized design has 2.5 times more range than the designs reported in the literature. Furthermore, the sensitivity improved by a factor of two when the stage is optimized for an accelerometer.

Transcriptional changes and oxidative stress associated with the synergistic interaction between potato virus X and potato virus Y and their relationship with symptom expression.

Many virus diseases of economic importance to agriculture result from mixtures of different pathogens invading the host at a given time. This contrasts with the relatively scarce studies available on the molecular events associated with virus---host interactions in mixed infections. Compared with single infections, co-infection of Nicotiana benthamiana with Potato virus X (PVX) and Potato virus Y (PVY) resulted in increased systemic symptoms (synergism) that led to necrosis of the newly emerging leaves and death of the plant. A comparative transcriptional analysis was undertaken to identify quantitative and qualitative differences in gene expression during this synergistic infection and correlate these changes with the severe symptoms it caused. Global transcription profiles of doubly infected leaves were compared with those from singly infected leaves using gene ontology enrichment analysis and metabolic pathway annotator software. Functional gene categories altered by the double infection comprise suites of genes regulated coordinately, which are associated with chloroplast functions (downregulated), protein synthesis and degradation (upregulated), carbohydrate metabolism (upregulated), and response to biotic stimulus and stress (upregulated). The expressions of reactive oxygen species?generating enzymes as well as several mitogen-activated protein kinases were also significantly induced. Accordingly, synergistic infection induced a severe oxidative stress in N. benthamiana leaves, as judged by increases in lipid peroxidation and by the generation of superoxide radicals in chloroplasts, which correlated with the misregulation of antioxidative genes in microarray data. Interestingly, expression of genes encoding oxylipin biosynthesis was uniquely upregulated by the synergistic infection. Virus-induced gene silencing of ?-dioxygenase1 delayed cell death during PVX?PVY infection.

Direct measurement of the mass difference between top and antitop quarks

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Differences between dual X-ray absorptiometry using pencil beam and fan beam modes and their determinants in vivo and in vitro

The aim of this study was to determine the influence of individual factors on differences in bone mineral density (BMD) using dual X-ray absorptiometry pencil beam (PB) and fan beam (FB) modes in vivo and in vitro. PB.BMD and FB.BMD of 63 normal Caucasian females ages 21-80 yr were measured at the lumbar spine and hip. Residuals of the FB/PB regression were used to assess the impact of height, weight, adiposity index (AI) (= weight/height(3/2)), back tissue thickness, and PB.BMD, respectively, on FB/PB difference. The Hologic Anthropomorphic Spine Phantom (ASP) was measured using the PB and FB modes at two different levels to assess the impact of scanning mode and focus distance. The European Spine Phantom (ESP) prototype, a geometrically well-defined phantom with known vertebral densities, was measured using PB and FB modes and analyzed manually to determine the impact of bone density on FB/PB difference and automatically to determine the impact of edge detection on FB/PB difference. Population BMD results were perfectly correlated, but significantly overestimated by 1.5% at the lumbar spine and underestimated by 0.7% at the neck, 1.8% at the trochanter, and 2.0% at the total hip, respectively, when using the FB compared with PB mode. At the lumbar spine, the FB/PB residual correlated negatively with height (r = 0.34, p < 0.01) and PB.BMD (r = 0.48, p <: 0. 0001) and positively with AI (r = 0.26, p < 0.05). At the hip, residual of trochanter correlated positively with weight (r = 0.36, p < 0.01) and AI (r = 0.36, p < 0.01). The FB mode significantly increased ASP BMD by 0.7% compared with PB. Using the FB mode, increasing focus distance significantly (p < 0.001) decreased area and bone mineral content, but not BMD. By contrast, increasing focus distance significantly decreased PB.BMD by 0.7%. With the ESP, the PB mode supplied accurate projected are of the bone (AREA) results but significant underestimation of specified BMD in the manual analysis. The FB mode significantly underestimated PB. AREA by 2.9% but fitted specified BMD quite well. FB/PB overestimation was larger for the low-density (+8.7%) than for the high-density vertebra (+4. 9%). The automated analysis resulted in more than 14% underestimation of PB. AREA (low-density vertebra) and an almost 13% overestimation of PB.BMD (high-density vertebra) using FB. In conclusion, FB and PB measurements are highly correlated at the lumbar spine and hip with small but significant BMD differences related to height, adiposity, and BMD. In clinical practice, it can be erroneous to switch from one method to another, especially in women with low bone density.

Isolation and characterization of a pseudoautosomal region-specific genetic marker in C57BL/6 mice using genomic representational difference analysis.

Representational difference analysis was used to identify strain-specific differences in the pseudoautosomal region (PAR) of mouse X and Y chromosomes. One second generation (C57BL/6 x Mus spretus) x Mus spretus interspecific backcross male carrying the C57BL/6 (B6) PAR was used for tester DNA. DNA from five backcross males from the same generation that were M. spretus-type for the PAR was pooled for the driver. A cloned probe designated B6-38 was recovered that is B6-specific in Southern analysis. Analysis of genomic DNA from several inbred strains of laboratory mice and diverse Mus species and subspecies identified a characteristic Pst I pattern of fragment sizes that is present only in the C57BL family of strains. Hybridization was observed with sequences in DBA/2J and to a limited extent with Mus musculus (PWK strain) and Mus castaneus DNA. No hybridization was observed in DNA of different Mus species, M. spretus, M. hortulanus, and M. caroli. Genetic analyses of B6-38 was conducted using C57BL congenic males that carry M. spretus alleles for distal X chromosome loci and the PAR and outcrosses of heterozygous congenic females with M. spretus. These analyses demonstrated that the B6-38 sequences were inherited with both the X and Y chromosome. B6-38 sequences were genetically mapped as a locus within the PAR using two interspecific backcrosses. The locus defined by B6-38 is designated DXYRp1. Preliminary analyses of recombination between the distal X chromosome gene amelogenin (Amg) and the PAR loci for either TelXY or sex chromosome association (Sxa) suggest that the locus DXYRp1 maps to the distal portion of the PAR.