Comparison of pharmacopuncture, aquapuncture and acepromazine for sedation of horses

Pharmacopuncture, the injection of subclinical doses of drugs into acupoints reduces drug undesirable side effects, residues in animal consumption products and treatment costs in large animals. Acepromazine (Acp) produces several undesirable effects, such as hypotension. Previous studies with the injection of 1/10 of Acp dose in dog acupoints showed its advantage for sedation, minimizing undesirable effects. Eight horses were randomly submitted to four different treatment protocols according to a Latin Square double-blind design: (i) 0.1 ml kg(1) of saline subcutaneously injected at the cervical region, (ii) 0.1 mg kg(1) of Acp injected subcutaneously at the cervical region, (iii) 0.01 ml kg(1) of saline injected into GV1 acupoint (aquapuncture) and (iv) 0.01 mg kg(1) of Acp injected into GV1 acupoint (pharmacopuncture). Heart rate, respiratory rate, head height and degree of sedation were measured before and at 30, 60 and 90 min after treatments. Signs of sedation were observed in all treated groups at 30 min and only in 1/10Acp-GV1 at 60 min after the treatments. Only the group treated with 0.1 mg kg(1) of Acp s.c. had significantly lower values of head height at 30 min. Respiratory rate tended to reduce in all groups but was significantly lower only in horses treated with 0.1 mg kg(1) of Acp s.c. Heart rate remained unchanged in all groups. Acp-pharmacopuncture on GV1 in horses produced a mild sedation when compared with the conventional dose of Acp. More investigations are necessary to determine the optimal dosage of Acp-pharmacopuncture for sedation in horses.

Three-phase tri-state buck-boost integrated inverter

This paper presents a three-phase integrated inverter suitable for stand-alone and/or grid-connected applications. The usage of the special features of the tri-state coupled with the special space vector modulation allows the inverter to present an attractive degree of freedom for the controllers' design, i.e. input and output can be controlled independently. Additionally all controllers are based on dq0 transformation, the system are described and interesting simulation results are available to confirm the proposal. Finally, this paper presents experimental evaluations of the inverter feeding a three-phase stand-alone load confirming the remarkable features of the decoupling control. © 2013 IEEE.

O ensino do desenho para crianças e jovens

Through my experiences as a teacher assistant in a free course design, I seek to understand the intentions and needs of children and youth with the design, so as to work it in a more consistent as the season and wishes of each student. For this I seek aid in studies on children's drawing of Derdyk Edith and also in observing the relationships that children and young people have with the drawing held in my practice as a teacher. Still reflect on the design in some of its particulars, especially concerning the optics of some artists and scholars of the practice of drawing. At the end of the study, propose suggestions for practices to be developed with children and young people who would be various forms of working drawing with experimental forms of building graphics, aiming so that students can add these unique experiences to broaden their understanding of design as well as its arch graphic possibilities. Thus inspired, especially in Derdyk considerations about the experimental design, I can conclude that through experimentation, we can offer young people a diverse thinking design and the possibilities of conceiving it.

How teachers think about the role of digital technologies in student assessment in mathematics

This study concerns teachers’ use of digital technologies in student assessment, and how the learning that is developed through the use of technology in mathematics can be evaluated. Nowadays math teachers use digital technologies in their teaching, but not in student assessment. The activities carried out with technology are seen as ‘extra-curricular’ (by both teachers and students), thus students do not learn what they can do in mathematics with digital technologies. I was interested in knowing the reasons teachers do not use digital technology to assess students’ competencies, and what they would need to be able to design innovative and appropriate tasks to assess students’ learning through digital technology. This dissertation is built on two main components: teachers and task design. I analyze teachers’ practices involving digital technologies with Ruthven’s Structuring Features of Classroom Practice, and what relation these practices have to the types of assessment they use. I study the kinds of assessment tasks teachers design with a DGE (Dynamic Geometry Environment), using Laborde’s categorization of DGE tasks. I consider the competencies teachers aim to assess with these tasks, and how their goals relate to the learning outcomes of the curriculum. This study also develops new directions in finding how to design suitable tasks for student mathematical assessment in a DGE, and it is driven by the desire to know what kinds of questions teachers might be more interested in using. I investigate the kinds of technology-based assessment tasks teachers value, and the type of feedback they give to students. Finally, I point out that the curriculum should include a range of mathematical and technological competencies that involve the use of digital technologies in mathematics, and I evaluate the possibility to take advantage of technology feedback to allow students to continue learning while they are taking a test.

Changes in situational and dispositional factors as predictors of job satisfaction

Arguably, job satisfaction is one of the most important variables with regard to work. When explaining job satisfaction, research usually focuses on predictor variables in terms of levels but neglects growth rates. Therefore it remains unclear how potential predictors evolve over time and how their development affects job satisfaction. Using multivariate latent growth modeling in a study with 1145 young workers over five years, we analyzed how well job satisfaction is predicted a) by levels of situational (i.e., job control) and dispositional (i.e., Core Self-Evaluations (CSE)) factors and b) by growth per year of these predictors. Results showed both intercepts and slopes to be related to each other, suggesting a joint growth of job control and CSE during early careers. Job satisfaction after five years was best predicted by the slopes of job control (β = .31, p < .001) and CSE (β = .34, p < .01). These findings provide further longitudinal evidence for the role of situational as well as dispositional factors for predicting job satisfaction. In addition, growth rates per year were better predictors than initial levels. Furthermore, a lack of change in job control or CSE went along with a drop in job satisfaction, implying that young workers need to perceive things to be improving in order to increase, or at least maintain, their level of job satisfaction. In terms of theory, the relative importance of levels versus changes deserves more attention. In terms of practical implications, our results suggest a double emphasis on job design (i.e., granting sufficient, and increasing, control) and on personal development (e.g., through training) so that people experience a match between both. Finally, negative associations between initial levels and growth rates suggest that people are quite successful in achieving a reasonable fit between their job characteristics and their needs and goals.

This Wildest Year: A collection of poems and photographs

The chapbooks created in the year ending in June 2012 include eleven themed collections and three installments of “In Thirteen Moons,” which didn’t get completed till that fall. This Wildest Year brings together the poems of the eleven themed chapbooks, each as a separate chapter. I have e-published this book for three reasons. First, the chapbooks have all been printed in very limited runs, and few copies remain to be shared with friends, old and new. Second, by ordering the chapters more or less chronologically, one can more easily see themes unfold and new connections made. And finally, this e-book is a bit of an experiment, allowing me to develop skills in self-publishing and graphic design. I hope you will find it to be a successful experiment.

Estrategias innovadoras para la gestión del riesgo de sequía en sistemas ganaderos extensivos

La vulnerabilidad de los sistemas ganaderos de pastoreo pone en evidencia la necesidad de herramientas para evaluar y mitigar los efectos de la sequía. El avance en la teledetección ha despertado el interés por explotar potenciales aplicaciones, y está dando lugar a un intenso desarrollo de innovaciones en distintos campos. Una de estas áreas es la gestión del riesgo climático, en donde la utilización de índices de vegetación permite la evaluación de la sequía. En esta investigación, se analiza el impacto de la sequía y se evalúa el potencial de nuevas tecnologías como la teledetección para la gestión del riesgo de sequía en sistemas de ganadería extensiva. Para ello, se desarrollan tres aplicaciones: (i) evaluar el impacto económico de la sequía en una explotación ganadera extensiva de la dehesa de Andalucía, (ii) elaborar mapas de vulnerabilidad a la sequía en pastos de Chile y (iii) diseñar y evaluar el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. En la primera aplicación, se diseña un modelo dinámico y estocástico que integra aspectos climáticos, ecológicos, agronómicos y socioeconómicos para evaluar el riesgo de sequía. El modelo simula una explotación ganadera tipo de la dehesa de Andalucía para el período 1999-2010. El método de Análisis Histórico y la simulación de MonteCarlo se utilizan para identificar los principales factores de riesgo de la explotación, entre los que destacan, los periodos de inicios del verano e inicios de invierno. Los resultados muestran la existencia de un desfase temporal entre el riesgo climático y riesgo económico, teniendo este último un periodo de duración más extenso en el tiempo. También, revelan que la intensidad, frecuencia y duración son tres atributos cruciales que determinan el impacto económico de la sequía. La estrategia de reducción de la carga ganadera permite aminorar el riesgo, pero conlleva una disminución en el margen bruto de la explotación. La segunda aplicación está dedicada a la elaboración de mapas de vulnerabilidad a la sequia en pastos de Chile. Para ello, se propone y desarrolla un índice de riesgo económico (IRESP) sencillo de interpretar y replicable, que integra factores de riesgo y estrategias de adaptación para obtener una medida del Valor en Riesgo, es decir, la máxima pérdida esperada en un año con un nivel de significación del 5%.La representación espacial del IRESP pone en evidencia patrones espaciales y diferencias significativas en la vulnerabilidad a la sequía a lo largo de Chile. Además, refleja que la vulnerabilidad no siempre esta correlacionada con el riesgo climático y demuestra la importancia de considerar las estrategias de adaptación. Las medidas de autocorrelación espacial revelan que el riesgo sistémico es considerablemente mayor en el sur que en el resto de zonas. Los resultados demuestran que el IRESP transmite información pertinente y, que los mapas de vulnerabilidad pueden ser una herramienta útil en el diseño de políticas y toma de decisiones para la gestión del riesgo de sequía. La tercera aplicación evalúa el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. Para lo cual, se desarrolla un modelo estocástico para estimar la prima actuarialmente justa del seguro y se proponen y evalúan pautas alternativas para mejorar el diseño del contrato. Se aborda el riesgo base, el principal problema de los seguros indexados identificado en la literatura y, que está referido a la correlación imperfecta del índice con las pérdidas de la explotación. Para ello, se sigue un enfoque bayesiano que permite evaluar el impacto en el riesgo base de las pautas de diseño propuestas: i) una zonificación por clúster que considera aspectos espacio-temporales, ii) un período de garantía acotado a los ciclos fenológicos del pasto y iii) umbral de garantía. Los resultados muestran que tanto la zonificación como el periodo de garantía reducen el riesgo base considerablemente. Sin embargo, el umbral de garantía tiene un efecto ambiguo sobre el riesgo base. Por otra parte, la zonificación por clúster contribuye a aminorar el riesgo sistémico que enfrentan las aseguradoras. Estos resultados han puesto de manifiesto que un buen diseño de contrato puede tener un doble dividendo, por un lado aumentar su utilidad y, por otro, reducir el coste del seguro. Un diseño de contrato eficiente junto con los avances en la teledetección y un adecuado marco institucional son los pilares básicos para el buen funcionamiento de un programa de seguro. Las nuevas tecnologías ofrecen un importante potencial para la innovación en la gestión del riesgo climático. Los avances en este campo pueden proporcionar importantes beneficios sociales en los países en desarrollo y regiones vulnerables, donde las herramientas para gestionar eficazmente los riesgos sistémicos como la sequía pueden ser de gran ayuda para el desarrollo. The vulnerability of grazing livestock systems highlights the need for tools to assess and mitigate the adverse impact of drought. The recent and rapid progress in remote sensing has awakened an interest for tapping into potential applications, triggering intensive efforts to develop innovations in a number of spheres. One of these areas is climate risk management, where the use of vegetation indices facilitates assessment of drought. This research analyzes drought impacts and evaluates the potential of new technologies such as remote sensing to manage drought risk in extensive livestock systems. Three essays in drought risk management are developed to: (i) assess the economic impact of drought on a livestock farm in the Andalusian Dehesa, (ii) build drought vulnerability maps in Chilean grazing lands, and (iii) design and evaluate the potential of an index insurance policy to address the risk of drought in grazing lands in Coquimbo, Chile. In the first essay, a dynamic and stochastic farm model is designed combining climate, agronomic, socio-economic and ecological aspects to assess drought risk. The model is developed to simulate a representative livestock farm in the Dehesa of Andalusia for the time period 1999-2010. Burn analysis and MonteCarlo simulation methods are used to identify the significance of various risk sources at the farm. Most notably, early summer and early winter are identified as periods of peak risk. Moreover, there is a significant time lag between climate and economic risk and this later last longer than the former. It is shown that intensity, frequency and duration of the drought are three crucial attributes that shape the economic impact of drought. Sensitivity analysis is conducted to assess the sustainability of farm management strategies and demonstrates that lowering the stocking rate reduces farmer exposure to drought risk but entails a reduction in the expected gross margin. The second essay, mapping drought vulnerability in Chilean grazing lands, proposes and builds an index of economic risk (IRESP) that is replicable and simple to interpret. This methodology integrates risk factors and adaptation strategies to deliver information on Value at Risk, maximum expected losses at 5% significance level. Mapping IRESP provides evidence about spatial patterns and significant differences in drought vulnerability across Chilean grazing lands. Spatial autocorrelation measures reveal that systemic risk is considerably larger in the South as compared to Northern or Central Regions. Furthermore, it is shown that vulnerability is not necessarily correlated with climate risk and that adaptation strategies do matter. These results show that IRESP conveys relevant information and that vulnerability maps may be useful tools to assess policy design and decision-making in drought risk management. The third essay develops a stochastic model to estimate the actuarially fair premium and evaluates the potential of an indexed insurance policy to manage drought risk in Coquimbo, a relevant livestock farming region of Chile. Basis risk refers to the imperfect correlation of the index and farmer loses and is identified in the literature as a main limitation of index insurance. A Bayesian approach is proposed to assess the impact on basis risk of alternative guidelines in contract design: i) A cluster zoning that considers space-time aspects, ii) A guarantee period bounded to fit phenological cycles, and iii) the triggering index threshold. Results show that both the proposed zoning and guarantee period considerably reduces basis risk. However, the triggering index threshold has an ambiguous effect on basis risk. On the other hand, cluster zoning contributes to ameliorate systemic risk faced by the insurer. These results highlighted that adequate contract design is important and may result in double dividend. On the one hand, increasing farmers’ utility and, secondly, reducing the cost of insurance. An efficient contract design coupled with advances in remote sensing and an appropriate institutional framework are the basis for an efficient operation of an insurance program. The new technologies offer significant potential for innovation in climate risk managements. Progress in this field is capturing increasing attention and may provide important social gains in developing countries and vulnerable regions where the tools to efficiently manage systemic risks, such as drought, may be a means to foster development.

Persisting to Graduation: A Grounded Theory Exploration of Nontraditional Undergraduate Women's Enrollment

While women maintain a numerical majority in undergraduate college enrollments and degrees earned, they also represent the numerical majority among students over 29 years old, students of color, students who are in the lowest income category, students who are single parents, and students who attend college part-time (Peter & Horn, 2005; Planty, et al., 2008). The National Center for Educational Statistics (NCES) has identified seven characteristics that place students at risk of not completing an undergraduate degree; (a) delayed enrollment between high school and college, (b) part-time enrollment, (c) financial independence, (d) students with dependents, (e) students who are single parents, (f) students who work full-time while enrolled, and (g) students who completed a GED as opposed to earning a high school diploma (Choy, 2002; Dickerson & Stiefer, 2006; Horn & Premo, 1995). The above characteristics overlap with the categories where women have a numerical majority, thereby placing women in greater jeopardy of not completing a bachelor's degree. A review of the existing persistence literature demonstrates a lack of research devoted to understanding the persistence experiences, challenges, strategies, and decisions of nontraditional undergraduate in favor of the "traditional" undergraduate student (Pascarella & Terenzini, 2005; Reason 2003). For this doctoral dissertation, I have based the research on a critical race feminist framework, informed by my experience working with the population of nontraditional undergraduate women at a women's college and employed a critique of the persistence literature as sensitizing concepts. Using a modified grounded theory research design, I collected and analyzed data which led to the development of a grounded theory of nontraditional undergraduate women's persistence. The emergent concepts of commitment, environment, and support interact in a theory of academic momentum and I offer a critical race feminist reading of the findings and theory to expose race neutrality, honor the voices of women of color, and deconstruct the evidence presented. The implications of this research include student, institutional, and inclusive excellence approaches to increasing the persistence of nontraditional undergraduate women and contribute to the success of this unique population of learners.

Optimizing the number of stations in arrays measurements: experimental outcomes for different array geometries and the f-k method

Array measurements have become a valuable tool for site response characterization in a non-invasive way. The array design, i.e. size, geometry and number of stations, has a great influence in the quality of the obtained results. From the previous parameters, the number of available stations uses to be the main limitation for the field experiments, because of the economical and logistical constraints that it involves. Sometimes, from the initially planned array layout, carefully designed before the fieldwork campaign, one or more stations do not work properly, modifying the prearranged geometry. Whereas other times, there is not possible to set up the desired array layout, because of the lack of stations. Therefore, for a planned array layout, the number of operative stations and their arrangement in the array become a crucial point in the acquisition stage and subsequently in the dispersion curve estimation. In this paper we carry out an experimental work to analyze which is the minimum number of stations that would provide reliable dispersion curves for three prearranged array configurations (triangular, circular with central station and polygonal geometries). For the optimization study, we analyze together the theoretical array responses and the experimental dispersion curves obtained through the f-k method. In the case of the f-k method, we compare the dispersion curves obtained for the original or prearranged arrays with the ones obtained for the modified arrays, i.e. the dispersion curves obtained when a certain number of stations n is removed, each time, from the original layout of X geophones. The comparison is evaluated by means of a misfit function, which helps us to determine how constrained are the studied geometries by stations removing and which station or combination of stations affect more to the array capability when they are not available. All this information might be crucial to improve future array designs, determining when it is possible to optimize the number of arranged stations without losing the reliability of the obtained results.

The influence of the sample introduction system on signals of different tin compounds in inductively coupled plasma-based techniques

The influence of the sample introduction system on the signals obtained with different tin compounds in inductively coupled plasma (ICP) based techniques, i.e., ICP atomic emission spectrometry (ICP–AES) and ICP mass spectrometry (ICP–MS) has been studied. Signals for test solutions prepared from four different tin compounds (i.e., tin tetrachloride, monobutyltin, dibutyltin and di-tert-butyltin) in different solvents (methanol 0.8% (w/w), i-propanol 0.8% (w/w) and various acid matrices) have been measured by ICP–AES and ICP–MS. The results demonstrate a noticeable influence of the volatility of the tin compounds on their signals measured with both techniques. Thus, in agreement with the compound volatility, the highest signals are obtained for tin tetrachloride followed by di-tert-butyltin/monobutyltin and dibutyltin. The sample introduction system exerts an important effect on the amount of solution loading the plasma and, hence, on the relative signals afforded by the tin compounds in ICP–based techniques. Thus, when working with a pneumatic concentric nebulizer, the use of spray chambers affording high solvent transport efficiency to the plasma (such as cyclonic and single pass) or high spray chamber temperatures is recommended to minimize the influence of the tin chemical compound. Nevertheless, even when using the conventional pneumatic nebulizer coupled to the best spray chamber design (i.e., a single pass spray chamber), signals obtained for di-tert-butyltin/monobutyltin and dibutyltin are still around 10% and 30% lower than the corresponding signal for tin tetrachloride, respectively. When operating with a pneumatic microconcentric nebulizer coupled to a 50 °C-thermostated cinnabar spray chamber, all studied organotin compounds provided similar emission signals although about 60% lower than those obtained for tin tetrachloride. The use of an ultrasonic nebulizer coupled to a desolvation device provides the largest differences in the emission signals, among all tested systems.

From Convergence to Diffusion: The EU's influence on national tax systems. ACES Cases No. 2011.2

In this article I investigate to what extent European Integration stimulates policy convergence and diffusion of various forms of tax policy. Using a mixed-methods design, I find that several causal mechanisms contribute to an EU-wide diffusion of tax policies: imposition, competition, harmonization and learning/communication. I show that these mechanisms have different effects on different forms of taxation. Even if the ultimate outcome of this influence only in few cases leads to unconditional convergence, the EU has markedly accelerated policy diffusion among its member states.

Relief Well Rehabilitation Options in Chief Joseph Dam Right Abutment Drainage Tunnel

This report summarizes the data, observations, methods, assumptions, and decisions for the design of the Relief Well Rehabilitation Project in the Right Abutment Drainage Tunnel at Chief Joseph Dam. Chief Joseph Dam (CJD) is a dam on the Columbia River and is owned and operated by the U.S. Army Corps of Engineers (USACE). It is the second only to Grand Coulee dam as the largest producer of hydropower in the United States. The right abutment drainage tunnel contains wooden stave relief wells. Water flows from these wells which reduces the hydrostatic pressure in the right abutment of the dam. The 22 wells in the floor of the tunnel are 60 years old and are in need of rehabilitation. The objective of this project is to control the groundwater gradient, prevent the movement of sediment, stop total screen collapse, and prevent initiation of backwards erosion and piping in the abutment. The rehabilitation solution is to install new stainless steel screens into the existing wells, backfill the annular space between the old wooden screen and the new stainless steel screens with a 3/8-inch pea gravel filter pack, and install a new top cap to hold the new screen in place. This report documents the data, observations, and methods used to complete the final design. During tunnel inspections USACE geologists observed dislodged end plugs and evidence of sediment movement out of the formation. The relief wells have historically high flows between 6,000 gallons per minute (gpm) to 9,000 gpm. New screens are designed based on as-built data and historic tunnel flow. The new screens are 8-in diameter, 100 slot (0.10-inch) screens. We found that screen diameter and slot size would provide adequate transmitting capacity for most of the relief wells. The filter pack gradation is based on descriptions from foundation construction reports. I found that 3/8-inch pea gravel is appropriate for the abutment material. During design, I also considered an option to install the screens into the relief wells without filter pack. I eliminated this option because it did not meet our rehabilitation objective to prevent total failure of the wooden screens.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

The effects of defendant account on damage award decisions

The purpose of this study was to examine whether the manner in which civil defendants account for their behavior influences compensatory and punitive damage awards. Jurors read three civil trial summaries, in which I manipulated injury severity (high vs. low), defendant reprehensibility (high vs. low), defendant status (individual vs. corporate), and account (concession, excuse, justification or refusal) in a factorial design. I also included four control groups in which the defendant stipulated liability. In all other conditions, participants read that a jury had found the defendant negligent. Only defendant reprehensibility influenced punitive awards. Both plaintiff injury and defendant reprehensibility influenced compensatory awards. When individuals offered justifications and when corporations offered excuses, jurors awarded lower compensatory awards against low reprehensibility defendants than against high reprehensibility defendants. Negligence stipulations led to lower damage awards for individuals than for corporations. Additionally, concessions tended to produce lower awards when combined with a stipulation of negligence as opposed to a jury decision. These findings support the hypothesis that in cases in which the defendant is clearly negligent, circumstances exist in which stipulating negligence and offering an apologetic account will lead to reduced damage awards decisions. Results indicate that individual and corporate defendants offering justifications and refusals should first consider the reprehensibility of their actions. In a broader realm, findings demonstrate that the manner in which a jury perceives the explanation given by the defendant is dependent upon defendant characteristics and case-specific factors. ^

The expression of tradition: perennial gardening in St. John's, Newfoundland

In order to understand the processes which effect the individual realization of garden design, I have studied the practise of perennial gardening in St. John's, Newfoundland. I begin with an examination of the practical constraints on design intentions resulting from difficult growing conditions, and a limited market of plant materials, relevant gardening literature and skilled· garden workers. I establish the local repertoire of design models within which individual gardens are executed. Finally, I record the "text" of six ·perennial gardens and the commentary of their principal designers in order to examine both the implicit and explicit considerations informing the structure of the gardens. A sample of gardens has been examined in order to represent two principal performance contexts -- the public garden and the private garden -- and a characteristic selection of garden style and plant material is observed. The public gardens typically recall the "traditional" use of perennials in Newfoundland gardens through the selection of "old fashioned" plant species and through the overall design of the bed. In contrast, the private gardeners have generally adopted the style of the more recently fashionable "perennial border". However, below the level of design the private gardeners continue to express a sense of tradition in the _repetition of conventions of behaviour and expression among the gardeners' families and friends, in the propagation of individual plants grown by the gardeners' parents, and in the maintenance of a family interest in gardening. This examination of the practise of gardening, thus, leads away from the folklorists' traditional focus on the continuity of the traditional "item" towards an understanding of tradition as an expression of continuity which is given tangible shape according to the avenues of shared communication within particular performance contexts.