Paper 3: EUROCAT data quality indicators for population-based registries of congenital anomalies.

The European Surveillance of Congenital Anomalies (EUROCAT) network of population-based congenital anomaly registries is an important source of epidemiologic information on congenital anomalies in Europe covering live births, fetal deaths from 20 weeks gestation, and terminations of pregnancy for fetal anomaly. EUROCAT's policy is to strive for high-quality data, while ensuring consistency and transparency across all member registries. A set of 30 data quality indicators (DQIs) was developed to assess five key elements of data quality: completeness of case ascertainment, accuracy of diagnosis, completeness of information on EUROCAT variables, timeliness of data transmission, and availability of population denominator information. This article describes each of the individual DQIs and presents the output for each registry as well as the EUROCAT (unweighted) average, for 29 full member registries for 2004-2008. This information is also available on the EUROCAT website for previous years. The EUROCAT DQIs allow registries to evaluate their performance in relation to other registries and allows appropriate interpretations to be made of the data collected. The DQIs provide direction for improving data collection and ascertainment, and they allow annual assessment for monitoring continuous improvement. The DQI are constantly reviewed and refined to best document registry procedures and processes regarding data collection, to ensure appropriateness of DQI, and to ensure transparency so that the data collected can make a substantial and useful contribution to epidemiologic research on congenital anomalies.

Breastfeeding in the East Midlands: patterns, trends and data quality issues

Breastfeeding has important health benefits for both mother and child. Breastfed babies are less likely to report with gastric, respiratory and urinary tract infections and allergic diseases, while they are also less likely to become obese in later childhood. Improving breastfeeding initiation has become a national priority, and a national target has been set ̢?oto deliver an increase of two percentage points per annum in breastfeeding initiation rate, focusing especially on women from disadvantaged areas̢?. Despite improvements in data quality in previous years, it still remains difficult to construct an accurate and reliable picture of variations and trends in breastfeeding in the East Midlands. It is essential that nationally standardised data collection systems are put in place to enable effective and accurate monitoring and evaluation of breastfeeding status both at a local and national level.

Briefing 24: NCMP data 2008/9, East of England: Data quality

One in a series of six data briefings based on regional-level analysis of data from the National Child Measurement Programme (NCMP) undertaken by the National Obesity Observatory (NOO). The briefings are intended to complement the headline results for the region published in January 2010. This briefing covers issues relating to the quality and completeness of the NCMP data. Detailed analysis of the NCMP at national level is available from NOO at http://www.noo.org.uk/NOO_pubInformation on the methods used to

NRS State Data Quality Standards Checklist, 2002

The NRS state data quality standards identify the policies, processes and materials that states and local programs should have in place to collect valid and reliable data for the National Reporting System (NRS). The Division of Adult Education (DAEL) within the Office of Vocational and Adult Education developed the standards to define the characteristics of high quality state and local data collection systems for the NRS. The standards provide an organized way for DAEL to understand the quality of NRS data collection within the states and also provide guidance to states on how to improve their systems. States are to complete this checklist, which incorporates the standards, with their annual NRS data submission to rate their level of implementation of the standards. The accompanying policy document describes DAEL’s requirements for state conformance to the standards and explains the use of the information from this checklist.

Ganglion sentinelle dans les cancers du col de faible stade. Données actuelles. Assurance qualité. Perspectives [Sentinel lymph node in low stage cervical cancers. Current data. Quality assurance. Prospects].

Le prélèvement des ganglions sentinelles apparaît comme une technique séduisante pour l'évaluation ganglionnaire des cancers du col utérin de faible stade. La sélection d'une population à bas risque de métastase ganglionnaire, un entraînement minimal et le respect de quelques règles simples permettent de limiter le risque de faux négatif au minimum. La technique apporte des informations supplémentaires sur le plan anatomique en identifiant des ganglions situés en dehors des zones habituelles de curage, et sur le plan histologique avec la mise en évidence de cellules tumorales isolées et surtout de micrométastases dont la valeur pronostique est suspectée Sentinel node biopsy appears as a promising technique for the assessment of nodal disease in early cervical cancers. Selection of a population with a low risk of nodal metastasis, a minimal training, and simple rules allow a low false negative rate. Sentinel node biopsy provides supplementary information, such as anatomical information (nodes outside of routine lymphadenectomy areas) and histological information (isolated tumors cells and micrometastases).

Field Evaluation of Quality Management Concrete, MLR-97-3, 1998

Quality management concrete allows the contractor to develop the mix design for the portland cement concrete. This research was initiated to gain knowledge about contractor mix designs. An experiment was done to determine the variation in cylinders, beams, and cores that could be used to test the strength of the contractor's mix. In addition, the contractor's cylinder strengths and gradations were analyzed for statistical stability and process capability. This research supports the following conclusions: (1) The mold type used to cast the concrete cylinders had an effect on the compressive strength of the concrete. The 4.5-in. by 9-in. (11.43-cm by 22.86-cm) cylinders had lower strength at a 95% confidence interval than the 4-in. by 8-in. (10.16-cm by 20.32-cm) and 6-in. by 12-in. (15.24-cm by 30.48-cm) cylinders. (2) The low vibration consolidation effort had the lowest strength of the three consolidation efforts. In particular, an interaction occurred between the low vibration effort and the 4.5-in. by 9-in. (11.43-cm by 22.86-cm) mold. This interaction produced very low compressive strengths when compared with the other consolidation efforts. (3) A correlation of 0.64 R-squared was found between the 28 day cylinder and 28 day compressive strengths. (4) The compressive strength results of the process control testing were not in statistical control. The aggregate gradations were mostly in statistical control. The gradation process was capable of meeting specification requirements. However, many of the sieves were off target. (5) The fineness modulus of the aggregate gradations did not correlate well with the strength of the concrete. However, this is not surprising considering that the gradation tests and the strength tests did not represent the same material. In addition, the concrete still has many other variables that will affect its strength that were not controlled.

Applying the Total Quality Management Method in ICT Business

Kokonaisvaltaisen laatujohtamisen malli TQM (Total Quality Management) on noussut yhdeksi merkittävimmistä konsepteista globaalissa liiketoiminnassa, missä laatu on tärkeä kilpailutekijä. Tämä diplomityö pureutuu nykyaikaiseen kokonaisvaltaisen laatujohtamisen konseptiin, joka nostaa perinteisen laatuajattelun uudelle tasolle. Moderni laatujohtamisajattelu on kasvanut koskemaan yrityksen toiminnan kaikkia osa-alueita. Työn tavoitteena on TietoEnator Käsittely ja Verkkopalvelut liiketoiminta-alueen osalta laadun sekä liiketoiminnallisen suorituskyvyn parantaminen kokonaisvaltaisesti. Ennen varsinaisen laatujohtamis-konseptin käsittelyä työ esittelee ensin yleisellä tasolla perinteistä laatu käsitettä sekä käsittelee lyhyestiICT-liiketoimintaa ja siihen liittyviä standardeja. Lopuksi tutkimus esittelee priorisoituja parannusehdotuksia ja askeleita jotka auttavat organisaatiota saavuttamaan kokonaisvaltaisen laatujohtamiskonseptin mukaisia pyrkimyksiä.

A Semantic wiki for quality management in software development projects

Quality management has become a strategic issue for organisations and is very valuable to produce quality software. However, quality management systems (QMS) are not easy to implement and maintain. The authors' experience shows the benefits of developing a QMS by first formalising it using semantic web ontologies and then putting them into practice through a semantic wiki. The QMS ontology that has been developed captures the core concepts of a traditional QMS and combines them with concepts coming from the MPIu'a development process model, which is geared towards obtaining usable and accessible software products. Then, the ontology semantics is directly put into play by a semantics-aware tool, the Semantic MediaWiki. The developed QMS tool is being used for 2 years by the GRIHO research group, where it has manages almost 50 software development projects taking into account the quality management issues. It has also been externally audited by a quality certification organisation. Its users are very satisfied with their daily work with the tool, which manages all the documents created during project development and also allows them to collaborate, thanks to the wiki features.

Describing and Analyzing Information Technology through Total Quality Management and Process Management: Case Stora Enso Newsprint

Laatu on osaltaan vahvistamassa asemaansa liike-elämässä yritysten kilpaillessa kansainvälisillä markkinoilla niin hinnalla kuin laadulla. Tämä suuntaus on synnyttänyt useita laatuohjelmia, joita käytetään ahkerasti yritysten kokonais- valtaisen laatujohtamisen (TQM) toteuttamisessa. Laatujohtaminen kattaa yrityksen kaikki toiminnot ja luo vaatimuksia myös yrityksen tukitoimintojen kehittämiselle ja parantamiselle. Näihin lukeutuu myös tämän tutkimuksen kohde tietohallinto (IT). Tutkielman tavoitteena oli kuvata IT prosessin nykytila. Tutkielmassa laadittu prosessikuvaus pohjautuu prosessijohtamisen teoriaan ja kohdeyrityksen käyttämään laatupalkinto kriteeristöön. Tutkimusmenetelmänä prosessin nykytilan selvittämiseksi käytettiin teemahaastattelutta. Prosessin nykytilan ja sille asetettujen vaatimusten selvittämiseksi haastateltiin IT prosessin asiakkaita. Prosessianalyysi, tärkeimpien ala-prosessien tunnistaminen ja parannusalueiden löytäminen ovat tämän tutkielman keskeisemmät tulokset. Tutkielma painottui IT prosessin heikkouksien ja parannuskohteiden etsimiseen jatkuvan kehittämisen pohjaksi, ei niinkään prosessin radikaaliin uudistamiseen. Tutkielmassa esitellään TQM:n periaatteet, laatutyökaluja sekä prosessijohtamisen terminologia, periaatteet ja sen systemaattinen toteutus. Työ antaa myös kuvan siitä, miten TQM ja prosessijohtaminen niveltyvät yrityksen laatutyössä.