994 resultados para DI-2-ETHYLHEXYL PHTHALATE
Resumo:
The present work deals with the investigations on sthe structural spectral and magnetic interactions of transition metal complexes of multidentate ligands from D1-2-pyridyl ketone and N(4)-Substituted thiosemicarbazides.Thiosemicarbazones are thiourea derivatives with the general formula R2N— C(S)—NH—N=CR2. In the solution state, the thiosemicarbazones exhibit the thionethiol tautomerism similar to the keto-enol tautomerism, and in solution state the thiol form predominates and a deprotonation at the thiolate group in alcoholic medium enhances the coordination abilities ofthe thiosemicarbazones.The magnetochemistry of metal complexes of di-2-pyridyl ketone is a current hot subject of research, which mainly owes to the excellent structural diversity of the complexes ranging from cubanes to clusters, with promising ferromagnetic outputs.Only few efforts were aimed at the magnetochemistry of metal complexes of thiosemicarbazones, and that too were concerned with the complexes of bisttltioscinicarbazones). However, as far as the monothiosemicarbazones are concerned, the magnetochemistry of transition metal complexes of di-2-pyridyl ketone thiosemicarbazones turned up quite unexplored. Consequently, an investigation into it appeared novel and promising to us and that prompted this study, which can be regarded as the initial step towards exploring the magnetochemistry of thiosemicarbazone complexes, especially of di-2-pyridyl ketone derivatives.We could successfully isolate single crystals suitable for X-ray diffraction for the first three ligands. To conclude, we have synthesized some new thiosemicarbazones and their transition metal complexes and studied their structural, spectral and magnetic attributes. Some ofthe complexes revealed interesting stereochemistries and possible bridging characteristics with spectroscopic evidences. Unfortunately, single crystal Xray diffraction studies could not be carried out for many of these interesting compounds due to the lack of availability of suitable quality single crystals. However, the magnetic studies provided support for the proposed stereochemistry giving evidences for their magnetically concentrated nature. The magnetic susceptibilities measured at six different temperatures in the 80-298 K range are fitted into different magnetic equations, which provided an idea about the magnetic behavior of the compounds under study. Some of the copper, oxovanadium, nickel and cobalt complexes are found to possess anomalous magnetic moments, i.e., they revealed no regular gradation with temperature. However, some other copper complexes are observed to be antiferromagnetic, due to super-exchange pathways. The manganese complexes and one of the cobalt complexes are also observed to be antiferromagnetic in nature. However, some nickel complexes have turned up to be ferromagnetic. Accordingly, the versatile stereoehemistry and magnetic behavior of the complexes studied, prompt us to conclude that the transition metal complexes of di-2-pyridyl ketone thiosemicarbazones are promising systems for potential magnetic applications.
Resumo:
Five copper(II) complexes [CuLCl]2·CuCl2·4H2O (1), [CuLOAc] (2), [CuLNO3]2 (3), [CuLN3] (4) and [CuLNCS]·3/2H2O (5) of di-2-pyridyl ketone-N4-phenyl-3-semicarbazone (HL) were synthesized and characterized by elemental analyses and electronic, infrared and EPR spectral techniques. In all these complexes the semicarbazone undergoes deprotonation and coordinates through enolate oxygen, azomethine and pyridyl nitrogen atoms. All the complexes are EPR active due to the presence of an unpaired electron. EPR spectra of all the complexes in DMF at 77K suggest axial symmetry and the presence of half field signals for the complexes 1 and 3 indicates dimeric structures
Resumo:
Six new copper complexes of di-2-pyridyl ketone nicotinoylhydrazone (HDKN) have been synthesized. The complexes have been characterized by a variety of spectroscopic techniques and the structure of [Cu(DKN)2]·H2O has been determined by single crystal X-ray diffraction. The compound [Cu(DKN)2]·H2O crystallized in the monoclinic space group P21 and has a distorted octahedral geometry. The IR spectra revealed the presence of variable modes of chelation for the investigated ligand. The EPR spectra of compounds [Cu2(DKN)2( -N3)2] and [Cu2(DKN)2( -NCS)2] in polycrystalline state suggest a dimeric structure as they exhibited a half field signal, which indicate the presence of a weak interaction between two Cu(II) ions in these complexes
Resumo:
Dins dels processos de recuperació de metalls de dissolucions diluïdes s'ha realitzat un estudi del procés d'extracció d'or i de zinc mitjançant resines amberlite XAD-2 impregnades amb sulfur de triisobutil fosfina (TIBPS) i àcid di-(2-etilhexil) fosfòric (DEHPA) respectivament. S'ha realitzat un estudi de l'equilibri de l'adsorció d'espècies metàl·liques d'aquests metalls amb les resines indicades anteriorment. Amb la metodologia emprada per a la determinació dels punts d'equilibri dels experiments en batch i en columna, s'ha vist que una única isoterma no podia descriure el fenomen global d'equilibri i que en funció de la metodologia emprada s'obtenien isotermes diferents. Es va introduir una nova variable per poder explicar el fenomen observat, i per tant, amb aquesta nova variable l'equació de la isoterma es converteix amb l'equació d'una supèrfície que s'ha definit com a Superfície d'Equilibri. S'han determinat les equacions de les Suprfícies d'Equilibri dels sistemes d'adsorció estudiats (Au(III) TIBPS/XAD-2 i Zn(II) DEHPA/XAD-2) observan una bona coincidència de tots els punts d'equilibri obtinguts sobre la superfície, així com, un bon ajust de totes les isotermes obtingudes en funció de les diferents metodologies emprades sobre les respectives superfícies d'equilibri. Aquest nou concepte generalitza el concepte d'isoterma d'un procés d'adsorció. Fimalment, s'ha plantejat un model matemàtic d'adsorció per a determinar el coeficient efectiu de difusió (De) i el coeficient de transferància de matèria (kf) per ambdós sistemes d'adsorció estudiats mitjançant l'aplicació del model de difusió de sòlid homogeni (HSDM), utilitzant com a condició de contorn en el model la isoterma de Langmuir obtinguda mitjançant els experiments en columna de llit fix i emprant també l'equació obtinguda mitjançant el nou concepte de Superfície d'Equilibri. Els resultats obtinguts són molt satisfactoris, per tant, es pot concloure que la Superfície d'Equilibri és una bona eina per a descriure l'equilibri en els processos d'adsorció d'or i zinc amb les resines amberlite XAD-2 impregnades amb TIBPS i DEHPA respectivament.
Resumo:
The non-electrolyte dichloro(hydroxy-methoxy-di(2-pyridylmethane)copper(II), resulting from the reaction of di(2-pyridyl)ketone and copper(II) chloride in methanol solution, was isolated and characterized and its structure was determined by X-ray diffraction. The pyridyl nitrogens and the chloride anions virtually from a basal plane in which lies the copper atom, while the oxygen of the methoxy group is in an apical position at a distance of 2.497 (3)Å. The nitrogenous base adopts the boat conformation with the pyridyl rings forming a dihedral angle of 108.72 (14)°. The nearest interatomic copper distance of 3.940(3)Å precludes copper-copper interactions, while the proximity of copper to the out-of-plane chlorine atoms [3.109(3)Å] suggests weakly bound chloro-bridged dimers. Spectral changes indicate that protic molecules displace the methoxy group and water affords the corresponding 1,1-diol.
Resumo:
During the reaction of di-2-pyridyl ketone (dpk) with Na(2)[PdCl(4)] in alcoholic media, the C=O fragment of dpk undergoes facile solvolysis and the transformed di-2-pyridyl ketone (dpk(ROH), R = Me or H) binds to palladium as NN-donor. When the reaction is carried out in refluxing methanol, a mono-complex of type [Pd(dpk(MeOH))Cl(2)] is obtained. A similar reaction in ethanol affords a bis-complex of type [Pd(dpk(ROH))(2)]Cl(2). Structure of both the complexes have been determined by X-ray crystallography. In acetonitrile solution the [pd(dpk(MeOH))Cl(2)] and [pd(dpk(ROH))(2)]Cl(2) complexes show intense absorptions in the visible and ultraviolet region, origin of which has been probed through uvr calculations. These two palladium complexes are found to be efficient catalysts for Suzuki cross-coupling reactions.
Resumo:
The ternary phase diagram for the orange essential oil (OEO)/sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/water system was constructed at 25 degrees C. It indicates a large single phase region, comprising an isotropic water-in-oil (W/O) microemulsion (ME) phase (L(2)), a liquid crystal (LC) (lamellar or hexagonal) and a large unstable emulsion phase that separates in two phases of normal and reverse micelles (L(1) and L(2)). In this communication the properties of the ME are investigated by viscosity, electric conductivity and small angle X-ray scattering (SAXS) indicating that the isotropic ME phase exhibits different behaviors depending on composition. At low water content low viscous ""dry"" surfactant structures are formed, whereas at higher water content higher viscous water droplets are formed. The experimental data allow the determination of the transition from ""dry"" to the water droplet structures within the L(2) phase. SAXS analyses have also been performed for selected LC samples. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
The adsorption of DPKSH onto Amberlite XAD-2 (styrene resin) and XAD-7 (acrylic ester resin) has been investigated, at (25 +/- 1)degrees C and pH 4.7. The experimental equilibrium data were fitted to the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) models. These three models provide a very good fit for both resins and the respective constants K(L), K(F), and K(DR) were calculated. For the same DPKSH concentration interval, the minimum time of contact for adsorption maximum at XAD-7 was smaller than at XAD-2 and the maximum amount of DPKSH adsorbed per gram of XAD-2 is smaller than at XAD-7. The investigation indicates that the mean sorption energy (E) characterizes a physical adsorption and the surfaces of both resins are energetically heterogeneous. The constants obtained in these studied systems were correlated and compared with those obtained for the silica gel/DPKSH system. (C) 2008 Published by Elsevier Inc.
Resumo:
A simple, fast, accurate, and sensitive spectrophotometric method was developed to determine zinc(II). This method is based on the reaction of Zn(II) with di-2-pyridyl ketone benzoylhydrazone (DPKBH), at pH=5.5 and 50% (v/v) ethanol. Beers law was obeyed in the range 0.020-1.82 mu g mL(-1) with a molar apsorptivity of 3.64 x 10(4) L mol(-1) cm(-1), and a detection limit (3) of 2.29 mu g L-1. The action of some interfering ions was verified and the developed method applied to pharmaceutical and biological samples. The results were then compared with those obtained by using a flame atomic absorption technique.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The potential adverse reproductive effects, with emphasis on the epididymis, of in utero and lactational exposure to 100 mg/kg/d di-n-butyl phthalate (DBP) in adult male rat offspring were investigated. The fetal testis histopathology was also determined. The selected endpoints included reproductive organ weights, sperm motility and morphology, sperm epididymal transit time, sperm quantity in the testis and epididymis, hormonal status, fetal testis and epididymal histopathology and stereology, and androgen receptor (AR), aquaporin 9 (AQP9), and Ki-67 immunoreactivities. Pregnant females were divided into two groups: control (C) and treated (T). The treated females received DBP (100 mg/kg/d, by gavage) from gestation day (GD) 12 to postnatal day (PND) 21, while control dams received the vehicle. Some pregnant dams were killed by decapitation on GD20, and testes from male fetuses were collected for histopathogy. Male rats from other dams were killed at PND 90. Fetal testes from treated group showed Leydig-cell clusters, presence of multinucleated germinative cells, and increase of the interstitial component. Testosterone levels and reproductive organ weights were similar between the treated and control adult groups. DBP treatment did not markedly affect relative proportions of epithelial, stromal, or luminal compartments in the epididymis; sperm counts in the testis and epididymis; sperm transit time; or sperm morphology and motility in adult rats. The AR and AQP9 immunoreactivities and proliferation index were similar for the two groups. These results showed that fetal testes were affected by DBP as evidenced by testicular histopathologic alterations, but reproductive parameters and epididymal structure/function were not significantly altered in the adult animals exposed to 100 mg/kg DBP in utero and during lactation.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
In questo lavoro di tesi sono stati effettuati studi conformazionali di 2-arilpiridine orto-sostituite su entrambi gli anelli aromatici. Essendo questi sistemi dotati di sostituenti relativamente ingombranti, le rotazioni attorno all’asse arile-arile risultano essere limitate e la molecola può presentarsi sotto forma di due enantiomeri conformazionali. È stato effettuato un paragone tra le energie di attivazione di due serie di 2-arilpiridine variamente sostituite con una serie di molecole aventi sostituenti analoghi ma caratterizzata dall’assenza di atomi di azoto piridinici. Nel caso di quest’ultima serie, i fattori che regolano le barriere rotazionali sono da imputare a motivazioni di tipo puramente sterico. La nucleofugacità è un parametro importante che interviene nella determinazione delle energie di attivazione di questo tipo di processi: è stato osservato sperimentalmente che gruppi uscenti peggiori destabilizzino maggiormente lo stato di transizione di un processo di interconversione, mentre molecole aventi atomi più elettronegativi sul gruppo uscente presentino energie di attivazione inferiori. Le barriere rotazionali sono state misurate tramite NMR dinamico e razionalizzate grazie all’aiuto di calcoli eseguiti con metodo DFT, necessari per prevedere le geometrie degli stati fondamentali e di transizione delle molecole studiate.
Resumo:
La furfurale (FU) rappresenta una delle più importanti molecole piattaforma per la produzione di biocarburanti e prodotti chimici a partire dalle biomasse. L’elevato interesse che si nutre nei confronti di tale molecola è giustificato dall’ampio spettro di reazioni che possono essere condotte su di essa al fine di ottenere prodotti di interesse industriale, quali, ad esempio, il furfuril alcool (FAL) e il metilfurano (MFU). I processi attualmente utilizzati per la produzione di tali molecole usano H2 e costosi catalizzatori a base di metalli nobili. Un’alternativa interessante a questi processi è quella che prevede di utilizzare un alcool come fonte di idrogeno tramite un processo di H-transfer su catalizzatori a base di ossidi misti. Lo scopo di questa tesi è stata quindi la sintesi e lo studio delle proprietà catalitiche del sistema FeVO4, nella reazione di riduzione in fase gas della furfurale, usando metanolo come agente di H-transfer. Il catalizzatore è stato ottenuto mediante coprecipitazione dei precursori di Fe e V e successivamente calcinato. La caratterizzazione Raman e XRD ha confermato la bontà della procedura di sintesi. I risultati dei test catalitici hanno mostrato che nelle condizioni ottimali il sistema è altamente selettivo nella riduzione della FU a MFU, mentre i prodotti secondari sono 2-vinilfurano e 2,5-dimetilfurano. A causa della deposizione di specie carboniose sulla superficie del catalizzatore, la conversione della FU tende a diminuire col passare delle ore di reazione. Tuttavia il sistema risulta rigenerabile grazie ad un trattamento in aria a 450°C. Inoltre l’analisi XRD dei catalizzatori scaricati ha mostrato che l’ossido misto subisce un processo di riduzione a seguito dell’interazioni con il metanolo, in quanto la stechiometria Fe:V:O passa dal valore di 1:1:4 a valori di 1:1:3. Sulla base di questi dati il processo di produzione del MFU è stato ulteriormente ottimizzato effettuando un pretrattamento riduttivo del catalizzatore prima dei test catalitici.