Parallel induction of modular classification rules

The Distributed Rule Induction (DRI) project at the University of Portsmouth is concerned with distributed data mining algorithms for automatically generating rules of all kinds. In this paper we present a system architecture and its implementation for inducing modular classification rules in parallel in a local area network using a distributed blackboard system. We present initial results of a prototype implementation based on the Prism algorithm.

The efficacy of shopping value in predicting destination loyalty

Recognizing the importance of tourism's experiential aspects, this research examines how hedonic and utilitarian values relate to tourist's overall shopping experience satisfaction and destination loyalty. Study findings suggest both hedonic and utilitarian shopping values are strongly linked to overall shopping satisfaction. Overall shopping satisfaction fully mediates utilitarian shopping value's effect on destination repatronage intention (DRI), destination word-of-mouth (DWoM), and partially mediates hedonic shopping value's (HSV) effect on DRI and DWoM. Study results advance consumer behavior theory and offer managerial implications for retailers operating in a rapidly maturing tourism destination in Turkey's Mediterranean region.

Elemental analysis of nuts and seeds by axially viewed ICP OES

A method for the multi-elemental determination of metals (Al, Ba, Ca, Cu, Fe, K, Mg, Mn, Sr and Zn), metalloids (B and Si), and non-metals (Cl, P and 5) in the babassu nut and mesocarp, sapucaia nut, coconut pulp, cupuassu pulp and seed, and cashew nut by axially viewed inductively coupled plasma optical emission spectrometry is presented. A diluted oxidant mixture (2 ml HNO(3) + 1 ml H(2)O(2) + 3 ml H(2)O) was used to achieve the complete decomposition of the organic matrix in a closed-vessel microwave oven. The accuracy of the entire proposed method was confirmed by standard reference material analysis (peach leaves-NIST SRM1547). The certified values showed a good agreement at a 95% confidence limit (Student`s t-test). The average RSD for repeatability of calibration solutions measurements were in the range of 1.1-6.7%. Limits of quantification (LOQ = 10 x LOD) were in the level of 0.00072-0.0532 mg/l. The macro and micronutrient ranges in the different nuts and seeds did not exceed the dietary reference intake (DRI), except for Mn in the babassu nut. (C) 2010 Published by Elsevier Ltd.

Arbetsmiljö vid service- och reparation av skogsbränslemaskiner

Syftet med denna studie är att ta fram underlag till en arbetsmiljöchecklista för service och reparationsarbete av skogsbränslemaskiner. Däri ingår maskiner för skördning, transport och sönderdelning av sortimenten GROT (grenar och toppar), stubbar respektive klenskog. En avgränsning har gjorts till service och reparationsarbete som görs ute i fält. Tjugotre riktade fallstudier har genomförts i Mellansverige med fokus på service- och reparationsarbete som skett ute i fält. Arbetsmiljöfaktorer har observerats och dokumenterats med foto, samtal har förts med förare och servicemän, och mätningar av buller och damm har genomförts. Vid samtal med förare har efterfrågats hur ofta service och reparationsarbete genomförs, vem som gör det, vilka moment som ingår samt var det vanligtvis utförs. Servicearbete ingår i förarens arbetsuppgifter och förekommer med olika intervall. Vissa arbetsmoment utförs dagligen, såsom byte av huggstål, smörjning av krannipplar och renblåsning av container. Andra sker med längre intervall, såsom byte av oljor och filter. I studien har tillvägagångssätt och arbetsmiljörisker vid omfattande, respektive mindre, service- ochreparationsarbete identifierats. Service- och reparationsarbete är ofta tungt och smutsigt.Arbetsmiljörisker samt goda exempel på lösningar för olika typer av maskiner har sammanställts.Baserat på studiens empiriska resultat, genomförda litteraturstudier och analyser harcheckpunkter som bör ingå i en arbetsmiljöchecklista identifierats. Identifierade checkpunkternahar grupperats utifrån målgrupp och typ av arbetsmoment med syftet att vara praktisktanvändbara. Målgrupperna är maskintillverkare/ägare som modifierar maskiner, respektiveservicemän och förare. Framtagna checkpunkter utgör en grund till en checklista för arbete medservice- och reparationsarbete av skogsbränslemaskiner.

Musikalisk gestaltning av en ”image” : - En fallstudie i design av narrativ mediemusik -

Studien ligger inom ramen för Ljud- och musikproduktion och bygger på ett case där en varumärkesmelodi/ musiklogotype till ett musikgymnasium ska designas. Syftet med studien är att utforska hur en image kan gestaltas musikaliskt och däri bättre förstå hur forskning genom design och användarmedverkan - påverkar och bidrar till processen inom design av narrativ mediemusik. Studien har ämnat svara på den övergripande frågeställningen: Hur kan komposition av narrativ musik beskrivas och genomföras som en designprocess? Forskningsfrågan innefattar även subfrågorna: Hur bidrar användarmedverkan till arbetsprocess vid design av narrativ mediemusik? Hur bidrar gruppsammansättning, själva processen och processverktygen till ett musikaliskt relevant resultat? Med formuleringen "ett musikaliskt relevant resultat" avses i studiens kontext en musikalisk prototyp/slutprodukt som har potential att kunna uttrycka känslor och värderingar som kan överensstämma med varumärkets (skolans) image och formulerade värderubriker. Kärnan i arbetet ligger inom fälten forskning genom design och användarmedverkan, där deltagarna under arbetsprocessens gång kontinuerligt och i flera processteg bidragit genom diskussioner, reaktioner, resonemang och konkreta förslag. Studien visar att designarbete inom narrativ mediamusik tillsammans med representanter för användarna/ målgruppen kan generera fler idéer om aspekter specifika för arbete med design av narrativ mediemusik samt bidra till större förståelse för aktuella kontexter (målgrupps-relaterade och process-relaterade kontexter såväl som musikaliska och genre-relaterade kontexter), än om designern arbetar ensam. Av vikt är att under designprocessen ta fram flera versioner av prototyperna, att göra olika instrumenteringar och interpretationer av det musikaliska materialet, där ett av målen med prototyperna är att designer stegvis lär sig vad som fungerar - vad som skapar en klingande mening i den aktuella målrelaterade kontexten - och ett sätt att kommunicera den här kunskapen är att designa och pröva flera olika prototyper i klingade form.

Calcium intake and its relationship with risk of overweight and obesity in adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do estado nutricional do micronutriente ferro em atletas femininas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do consumo de vitamina A por gestantes assistidas em Centro de Saúde de Catanduva-SP

Pós-graduação em Alimentos e Nutrição - FCFAR

Serie lecturas sobre desarrollo agrícola

V. 1: Teorías económicas y análsis histórico del desarrollo agrícola; v. 2: Agricultura comparada; v 3: Recursos naturales en el desarrollo agropecuario; v. 4: Desarrollo rural integrado (DRI)

Influência do consumo de suco de laranja no perfil sérico dos lípides, apolipoproteínas e homocisteína em homens normais e hiperlipidêmicos

Pós-graduação em Alimentos e Nutrição - FCFAR

Effect of platelet-rich plasma on the healing of intrabony defects treated with an anorganic bovine bone mineral: a pilot study

BACKGROUND: Periodontal therapy using the combination of platelet-rich plasma (PRP) and different grafting materials has been suggested as a modality to enhance the outcome of regenerative surgery. In most clinical studies, a barrier membrane was used to cover the defects, and thus, the effects of PRP may have been masked by the effects of the barrier. The data from controlled clinical studies evaluating the effect of regenerative therapy using various grafting materials with or without PRP are still limited. The purpose of this study was to clinically compare the healing of intrabony defects treated with either a combination of an anorganic bovine bone mineral (ABBM) and PRP to those obtained with ABBM alone. METHODS: Thirty patients with advanced chronic periodontal disease and displaying one intrabony defect were randomly treated with PRP + ABBM or ABBM alone. The following clinical parameters were evaluated at baseline and 1 year after treatment: plaque index (PI), gingival index (GI), bleeding on probing (BOP), probing depth (PD), gingival recession (GR), and clinical attachment level (CAL). The primary outcome variable was CAL. RESULTS: No statistical significant differences in any of the investigated parameters between the two groups were observed at baseline. Healing was uneventful in all patients. In the PRP + ABBM group, mean PD decreased from 8.6 +/- 1.8 mm to 3.4 +/- 1.4 mm (P <0.001) and mean CAL changed from 9.9 +/- 1.7 mm to 5.3 +/- 1.8 mm (P <0.001). In the ABBM group, mean PD decreased from 8.5 +/- 2.0 mm to 3.2 +/- 1.3 mm (P <0.001) and mean CAL changed from 9.6 +/- 1.9 mm to 4.9 +/- 1.5 mm (P <0.001). CAL gains >or=3 mm were measured in 80% (12 of 15 defects) of cases treated with PRP + ABBM and in 87% (13 of 15 defects) of cases treated with ABBM alone. No statistically significant differences in any of the investigated parameters were observed between the two groups at the 1-year reevaluation. CONCLUSIONS: Within the limits of the present study, it can be concluded that 1) at 1 year after regenerative surgery with PRP + ABBM and ABBM alone, significant PD reductions and CAL gains were found, and 2) the use of PRP failed to improve the results obtained with ABBM alone.

Five-year results evaluating the effects of platelet-rich plasma on the healing of intrabony defects treated with enamel matrix derivative and natural bone mineral

BACKGROUND Regenerative periodontal surgery using the combination of enamel matrix derivative (EMD) and natural bone mineral (NBM) with and without addition of platelet-rich plasma (PRP) has been shown to result in substantial clinical improvements, but the long-term effects of this combination are unknown. METHODS The goal of this study was to evaluate the long-term (5-year) outcomes after regenerative surgery of deep intrabony defects with either EMD + NBM + PRP or EMD + NBM. Twenty-four patients were included. In each patient, one intrabony defect was randomly treated with either EMD + NBM + PRP or EMD + NBM. Clinical parameters were evaluated at baseline and 1 and 5 years after treatment. The primary outcome variable was clinical attachment level (CAL). RESULTS The sites treated with EMD + NBM + PRP demonstrated a mean CAL change from 10.5 ± 1.6 to 6.0 ± 1.7 mm (P <0.001) at 1 year and 6.2 ± 1.5 mm (P <0.001) at 5 years. EMD + NBM-treated defects showed a mean CAL change from 10.6 ± 1.7 to 6.1 ± 1.5 mm (P <0.001) at 1 year and 6.3 ± 1.4 mm (P <0.001) at 5 years. At 1 year, a CAL gain of ≥4 mm was measured in 83% (10 of 12) of the defects treated with EMD + NBM + PRP and in 100% (all 12) of the defects treated with EMD + NBM. Compared to baseline, in both groups at 5 years, a CAL gain of ≥4 mm was measured in 75% (nine of 12 in each group) of the defects. Four sites in the EMD + PRP + NBM group lost 1 mm of the CAL gained at 1 year. In the EMD + NBM group, one defect lost 2 mm and four other defects lost 1 mm of the CAL gained at 1 year. No statistically significant differences in any of the investigated parameters were observed between the two groups. CONCLUSIONS Within their limits, the present results indicate that: 1) the clinical outcomes obtained with both treatments can be maintained up to a period of 5 years; and 2) the use of PRP does not appear to improve the results obtained with EMD + NBM.

Ten-year results following treatment of intrabony defects with an enamel matrix protein derivative combined with either a natural bone mineral or a β-tricalcium phosphate

BACKGROUND The purpose of the present study is to evaluate the 10-year results following treatment of intrabony defects treated with an enamel matrix protein derivative (EMD) combined with either a natural bone mineral (NBM) or β-tricalcium phosphate (β-TCP). METHODS Twenty-two patients with advanced chronic periodontitis and displaying one deep intrabony defect were randomly treated with a combination of either EMD + NBM or EMD + β-TCP. Clinical evaluations were performed at baseline and at 1 and 10 years. The following parameters were evaluated: plaque index, bleeding on probing, probing depth, gingival recession, and clinical attachment level (CAL). The primary outcome variable was CAL. RESULTS The defects treated with EMD + NBM demonstrated a mean CAL change from 8.9 ± 1.5 mm to 5.3 ± 0.9 mm (P <0.001) and to 5.8 ± 1.1 mm (P <0.001) at 1 and 10 years, respectively. The sites treated with EMD + β-TCP showed a mean CAL change from 9.1 ± 1.6 mm to 5.4 ± 1.1 mm (P <0.001) at 1 year and 6.1 ± 1.4 mm (P <0.001) at 10 years. At 10 years two defects in the EMD + NBM group had lost 2 mm, whereas two other defects had lost 1 mm of the CAL gained at 1 year. In the EMD + β-TCP group three defects had lost 2 mm, whereas two other defects had lost 1 mm of the CAL gained at 1 year. Compared with baseline, at 10 years, a CAL gain of ≥3 mm was measured in 64% (i.e., seven of 11) of the defects in the EMD + NBM group and in 82% (i.e., nine of 11) of the defects in the EMD + β-TCP group. No statistically significant differences were found between the 1- and 10-year values in either of the two groups. Between the treatment groups, no statistically significant differences in any of the investigated parameters were observed at 1 and 10 years. CONCLUSION Within their limitations, the present findings indicate that the clinical improvements obtained with regenerative surgery using EMD + NBM or EMD + β-TCP can be maintained over a period of 10 years.

The water vapour flux above Switzerland and its role in the August 2005 extreme precipitation and flooding

The water budget approach is applied to an atmospheric box above Switzerland (hereafter referred to as the “Swiss box”) to quantify the atmospheric water vapour flux using ECMWF ERA-Interim reanalyses. The results confirm that the water vapour flux through the Swiss box is highly temporally variable, ranging from 1 to 5 · 107 kg/s during settled anticyclonic weather, but increasing in size by a factor of ten or more during high speed currents of water vapour. Overall, Switzerland and the Swiss box “import” more water vapour than it “exports”, but the amount gained remains only a small fraction (1% to 5%) of the total available water vapour passing by. High inward water vapour fluxes are not necessarily linked to high precipitation episodes. The water vapour flux during the August 2005 floods, which caused severe damage in central Switzerland, is examined and an assessment is made of the computed water vapour fluxes compared to high spatio-temporal rain gauge and radar observations. About 25% of the incoming water vapour flux was stored in Switzerland. The computed water vapour fluxes from ECMWF data compare well with the mean rain gauge observations and the combined rain-gauge radar precipitation products.